Used Hermle Uwf 1200 for sale (107)

Condition: good (used), Year of construction: 2015, functionality: fully functional, Machine from the greater Munich area: Hermle C 42 U, year of manufacture 2015, RS 2 automation / robot, year of manufacture 2019, Heidenhain iTNC 530 control system, Travel range X/Y/Z 800/800/550 mm, 2-axis NC swivel table, diameter 440 mm, 6-position rotary through-spindle, Kinematic, Heidenhain DNC, Dynamic linear axes, Spindle speed up to 18,000 rpm, Creds Ag S Ntjpfx Aizsi HSK - A 63 tool holder, 42-position tool changer, Additional magazine with 87 positions, Torque drive in the C-axis, Spur gear tandem drive in the A-axis, Rebmmgj Agfylon Sech max. table load 450 kg, High-pressure coolant system, 80 bar, Paper band filter system, Chip conveyor, Bed flushing system, Automatic door, Laminated safety glass panel, Electric thermal compensation, Heidenhain, Electric handwheel, 3D measuring probe, Renishaw, Blum tool breakage / measurement system.

Year of construction: 1993, operating hours: 13,924 h, condition: excellent (used), x-400,y-330,z-350,Winkeltisch 630x335,SK 40, 40-6.000 U/min,Meßtaster , Steuerung Heidenhain TNC 425 Cjdpfx Ajfgz Rksizeri

Year of construction: 1997, condition: used, x-travel 600 mm y-travel 400 mm z-travel 420 mm Control Heidenhain TNC 407 quill stroke 75 mm table surface area 900x458 mm Tool bore SK 40 DIN 2080 oder DIN 6 turning speed range - stepless 20-4500 U/min transmission ratio 3 feed stepless 1-5000 mm/min rapid motion -longitudinal/cross/vertical 7-7-6 m/min total power requirement 13 kW Csdpfolp U Akex Aizsri weight of the machine ca. 2,5 t dimensions of the machine ca. 4x3,8x2,0 m

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Crodpfoygx Hnjx Aizji Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Condition: ready for operation (used), A CNC universal tool milling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, table dimensions X/Y: 1000mm/500mm, quill stroke: 100mm, tool holder: SK40, spindle speed: 3150rpm, feed rate: 2m/min, rapid traverse: 5m/min, max. workpiece weight: 400kg. Machine dimensions X/Y/Z: approx. 3900mm/3300mm/2100mm, weight: approx. 3300kg, control: Heidenhain TNC 150. An on-site inspection is possible. Codpfxexwcu Aj Aizeri

Condition: used, Year of construction: 1996, Technical details: x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm tool taper: IBAG SKI 25 control: Heidenhain TNC 425 quill stroke vertical: nicht bekannt mm turning speed range: 2400 - 24.000 U/min feed:: 1 ... 5000 m/min m/min table surface area: 850 x 440 mm table swivelabel +/-: starr ° table load: 500 kg tool holder / places: 32 places für IBAC SKI 25 weight approx.: 3600 kg dimension machine xH: 2,5 x 3,0 x 2,1 m dimensions electric cabinet: L:1550 X B:550 x H:1700 mm Universal Milling and Drilling Machine - with IBAG high frequency spindle type HF 100A-30/24 - milling spindle taper Tool taper IBAG SKI with IBAG tightening bolt - cooling tank, capacity 16 l/min and 100 litre capacity Accessories: - 3-D push-button Heimer - Vertical head Hermle Credpfju Nc Uhjx Aizji - Tool holders according to availability i.D. *

Condition: used, Year of construction: 2009, machine/vehicle number: 19727, with CNC control, manufactured by HEIDENHAIN, type: ITNC 530, travel distances: X-axis: 800 mm, Y-axis: 600 mm, Z-axis: 500 mm, with automatic tool changer with 30 tool positions, with coolant system, chip conveyor, manufactured by KNOLL, type: 340 K-1, machine weight: 7000 kg, spindle operating hours: 13,122 hours. Crsdpfs Af Nlxox Aizei

Condition: excellent (used), Year of construction: 2012, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 21534, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, overall weight: 12,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 5,000 h, spindle motor power: 15,000 W, number of slots in tool magazine: 38, Equipment: chip conveyor, documentation/manual, Very good condition, used for light milling. High-pressure coolant flushing through the center of the tool, 80 bar. HSK63A tool holder. Blum tool breakage detection. iTNC530 control system. Includes two vices and a pneumatic clamping device ITS100/P WT. Credpfx Aozw Rl Ajizoi Direct sale to end-users only. W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231232, Hermle C600 U, year of manufacture 2004 Spindle new, with commissioning report Control system: - Heidenhain iTNC 530 - Control system operating hours: 68026 - Machine operating hours: 81237 - Spindle operating hours: 12429 Spindle: - Speed: 16,000 rpm - Tool holder: SK-40 - 30 tool magazine positions Equipment: - Rigid clamping table - NC rotary table, 4th axis (iTNC) - Coolant system - Chip conveyor: none - Electronic handwheel (iTNC) - Tool breakage monitoring - Chip flushing nozzle - Foot switch for clamping/unclamping - Hydraulic unit for clamping/unclamping Travel paths: - X-axis (longitudinal): 600 mm - Y-axis (transverse): 450 mm - Z-axis (vertical): 450 mm Table: - Clamping area: 800 mm x 465 mm - Maximum table load: 250 kg Axes: Cjdpe Ahfbdjfx Aizsri - Axis rapid traverse: 35 m/min - Acceleration: 5 m/s² - Measuring system X/Y/Z: 0.1 µm Dimensions & Weight: - Machine weight: approx. 6.8 t - Machine dimensions (W x D x H): 2.5 m x 2.4 m x 2.43 m The machine can be inspected under power by appointment. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: excellent (used), Year of construction: 2006, operating hours: 15,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 28,000 rpm, rotational speed (max.): 28,000 rpm, Heidenhain 530 control system. Cedpfxj Afzgpj Aizeri 28,000 RPM spindle. HSK63 A tool interface. 80 bar coolant pressure. Chip conveyor. Blum tool measuring system. Renishaw probe. Numerous accessories, holders, and vices, and much more. New spindle to be installed in summer 2024.

Condition: used, Year of construction: 2002, A CNC machining center with 4 axes is offered. Travel X/Y/Z: 600mm/450mm/450mm. Table load: 1000kg. Tool taper: SK 40. Number of axes: 4. Machine body: mineral casting. Spindle hours: 6372h. Operating hours in motion: 6392h. Control: Heidenhain TNC 530. Equipped with a permanently mounted rotary clamping fixture, 30-position carousel tool changer, coolant system, chip washing gun, touch probe and handheld control module. Weight: approx. 6500kg. Inspection possible by arrangement. Credpfe Ahy Svox Aizoi

Condition: used, Year of construction: 2001, A CNC machining center with 3 axes is offered. Travel X/Y/Z: 630mm/500mm/500mm. Table load capacity: 400kg. Tool taper: SK 40. Number of axes: 3. Spindle hours: approx. 7300h. Operating hours in motion: approx. 7300h. The buffer battery must be replaced. The hour meter readings are stated as approximate values. Control: Heidenhain TNC 426. Equipped with a 16-position chain-type tool changer, coolant system, chip flushing gun, touch probe and handheld control unit. Weight: approx. 4800kg. Inspection possible by arrangement. Crsdpfx Aj Ahy Syeizsi

Condition: good (used), functionality: fully functional, Hermle C 52 U, Control system: Heidenhain TNC 640, Travel range X/Y/Z: 1000/1100/750 mm, Crsdpfxj Ag N I Re Aizoi 2-axis NC rotary table, High-pressure coolant system, 80 bar, 3D measuring probe, Blum Wz. laser measuring system, Spindle speed up to 18,000 rpm, HSK 63, 60-tool capacity, Additional tool magazine.

Condition: used, Year of construction: 1997, A 5-axis machining center is offered. Travels X/Y/Z: 800mm/600mm/500mm. Table clamping surface X/Y: 540mm/540mm. Maximum workpiece weight: 300kg. Rapid traverse X/Y/Z: 35m/min. Tool magazine: 30 positions. Control: HEIDENHAIN TNC 430. Equipped with an NC swiveling rotary table, tool changer, protective enclosure and coolant system. Axis damage requiring repair. Repair quotation from the manufacturer is available. Inspection possible by arrangement. Crodpfxo Ahq Rde Aizei

Condition: used, Year of construction: 2007, travel -x axis 650 mm travel -y axis 600 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 number of spindle speeds 10.000 U/min NC rotary indexing table Ø 630 mm Cedpfxszaf Huo Aizeri numbers of positions in the tool changer 32 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The Z-axis motor was replaced in 2025, and the spindle was already replaced in 2015 at 7,100 operating hours. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U | C40U | C-40U | C-40 U

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, total height: 2,930 mm, total width: 2,210 mm, table load: 300 kg, overall weight: 8,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, product length (max.): 2,700 mm, number of axes: 5, This 5-axis HERMLE C 800 U was manufactured in 1997. It features an X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine is equipped with a NC swivelling rotary table measuring 540 x 540 mm and has a maximum table load of 300 kg. If you are looking to get high-quality machining capabilities, consider the HERMLE C 800 U vertical machining centre we have for sale. Contact us for further details. Cedpfx Ae Ahybfsizori - Machine has Damage on an axis- Clamping Surface / Table: NC swivelling rotary table 540 x 540 mm (interference contour diameter: 630 mm)- Swivel Range: +20° towards machine / -90° away from machine- Rapid Traverse (X / Y / Z): 35 m/min- Feed Range (X / Y / Z): 1 - 2000 mm/min manual / 30,000 mm/min programmed- Feed Force (X, Y, Z at 80% ED): 8,000 N- Tool Taper: SK 40 (similar to DIN 2079) / HSK compatible- Tool Magazine Capacity: 30 tool pockets (Pick-Up changer / ring magazine)- Operating Voltage: 460 V / 3~ / 60 Hz- Control Voltage: 24 V DC / 220 V AC- Total Nominal Current: 63 A- Total Power Rating: 43 kVA (equipped with IKZ / options)- Machine Dimensions (L x W x H): 2.70 x 2.21 x 2.93 m (base standard) / Height max. 3.00 m- Footprint Required (L x W): 4.50 x 3.50 m- Coolant Tank Capacity: 300 Liters- Sound Emission: 78 dB (A)- Equipped Options: Oil mist extraction unit, Chip conveyor, Internal coolant supply (IKZ) preparation/unit Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2015, operating hours: 12,500 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 18,000 rpm, overall weight: 12,500 kg, We offer in perfect condition Hermle C42U Dynamic with Heidenhain 640 control. Machine has 12.000 spindle hours. X-Axis travel: 800 mm Y-Axis travel: 800 mm Z-Axis travel: 550 mm Dynamic package torque axis, table Ø440 with secondary claming plates 920 x 490 mm Csdpjzpfg Eefx Aizori Spindle: HSK-A63 18.000 RPM

Condition: used, Year of construction: 1998, We are offering this used Hermle U 630 S vertical machining center, manufactured in 1998, for sale. Unfortunately, due to space constraints, we need to have the machine removed in week 44. Cedpfjz Tkc Eex Aizsri The machine can be loaded for transport this week. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2004, 5-axis machine from the brand Hermle - Hermle U740 Cedpfxoz Nih Ee Aizeri - Year of manufacture 2004 Control system: - Heidenhain iTNC 530 - Electronic handwheel - 3D measuring probe Renishaw OMP 40-2 Main spindle: - Tool holder SK 40 - Speed range max. 12,000 rpm - B-axis with hydraulic clamping -5° / +95° Tool changer: - 12 magazine positions Work area: - X- 915 mm - Y- 500 mm - Z- 500 mm Table design: - NC rotary table - Table load max. 500 kg Coolant: - Internal cooling 40 bar - Chip conveyor Machine hours: - Machine on 30,622 - Spindle on 8,844 Accessories: - Approx. 100 tool holders incl. tool cabinet (see picture) - 1 hydraulic vise Allmatic (see picture) and much more. Delivery time: - Immediate Video available. Special features: - Machine is immediately ready for use. - Machine is immediately available for delivery. - Machine can be inspected and tested on site under power. - Machine will be loaded onto a truck free of charge. - Forklift for loading is available. - Transport can be arranged upon request.

Condition: good (used), Year of construction: 2004, operating hours: 35,251 h, functionality: fully functional, overall weight: 8,500 kg, spindle speed (min.): 12,000 rpm, operating hours of spindle: 11,082 h, number of slots in tool magazine: 28, Equipment: chip conveyor, documentation/manual, This HERMLE U1130 universal machining center was manufactured in Germany in 2004 and has been in operation for 35,577 hours, of which only 8,087 are spindle hours. Equipped with a Heidenhain TNC 520 control, this machine features the integration of 5 axes and an NC rotary table. It offers excellent operating conditions. Additional information: Machine advantages: Qualitative machine advantages: Very good condition Spindle operating hours: 11,082 Technical machine advantages: Codsz Inknopfx Aizeri Internal cooling at 40 bar Integrated NC rotary table Blum laser measurement system Without the vises shown in the pictures.

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, CNC universal milling machine HERMLE U 630 T With Heidenhain TNC 426 path control system Year of manufacture: 1998 Travel distances: X 630 (875) Y 500 Z 500 Crodpfj Aa Aktex Aizoi Spindle speed range: 20 – 7,000 rpm, stepless Including the following accessories: Fixed swivel table, 900 mm x 528 mm clamping surface Vertical tool changer with 16 magazine positions Full enclosure with sliding doors and interior lighting Electronic handwheel 3D measuring probe Heidenhain Coolant system 4 adjustable machine feet Operating manuals

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller model: Heidenhain iTNC530, table width: 960 mm, table length: 600 mm, overall weight: 9,000 kg, spindle speed (max.): 40,000 rpm, operating hours of spindle: 22,800 h, spindle nose: HSK E 40, number of spindles: 1, number of slots in tool magazine: 38, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, This machine has been used exclusively for copper processing. The coolant water supply is present but has not been used to date. In other words, a superb machine that has always done very light machining, has never seen coolant, and is equipped with a Weiss spindle running at 40,000 rpm. The machine comes as standard including: - Original documentation for the machine and the Weiss spindle - BLUM tool laser - Heidenhain TS-440 3D probe - Spindle and emulsion cooler - Lockable roof (harmonica style) The machine can be inspected under power by appointment. Credoxgukbopfx Aizsi

Condition: excellent (used), Year of construction: 2018, HS Flex 20 station pallet loader. Codpfx Aijzghngezeri XYZ: 600 x 550 x 330mm, Maximum workpiece diameter 450mm, maximum workpiece height 355mm, Maximum table load 300Kg, A axis -/+ 115 degrees, spindle taper HSK 63, spindle speed 15,000rpm, 30 station tool changer, Heidenhain TNC 640 control, with swarf conveyor , and high pressure coolant.

Condition: good (used), Year of construction: 2015, C 22 U + IH 30 handling system + ZM 192 additional magazine Machine parameters: Travel in X, Y, Z axes: 450, 600, 330 mm Credpfx Aioy Rgfzezei Max. spindle speed: 18000 HSK-A63 rpm Description: The machine is in good technical condition, test operation is possible by prior arrangement. Equipped with Hardware KinematicOpt, centre cooling 80 bar, BLUM LC 50 TL200, Renishaw TNC 640. Original price was approx. €570,000. Comprehensive specification of supplied components and options available – will be provided upon request.

Condition: good (used), Year of construction: 1999, Universal machining center Machine type: Hermle U 630 S Control: Heidenhain TNC 410 Year: 1999 SPECIFICATIONS Spindle speeds: 20 - 7.000 rpm Spindle power: 7,5 kW milling head: 0 - 90° Travel X-Axis: 875 mm Y-Axis: 500 mm Z-Axis: 500 mm Rapid motion: (X/Y/Z): 15 m/min. Feed: (X/Y/Z): 15 m/min. Equipment Tool: SK 40 quill range: 75 mm Crsdpfx Asz Dkrmeizei Table size: 900 x 528 mm Power consumption: 14 KW Machine weight: 4.500 kg Req. space (LxBxH): 2,3 x 2,0 x 2,1 m