Used Hhs for sale (176)

Condition: good (used), Schmedt PräLeg HHS 1805 Case in machine This machine is in very good condition. Manufactured by Schmedt, Germany. The machine suspends book blocks into pre-cut hardcovers. Kjdjx N I E Tspfx Adwodg Two gluers with smooth glue thickness adjustment. The machine comes with full documentation and a CE certificate. Format: Block height: 80–340 mm Block width: 110–450 mm Block thickness: 2–80 mm Capacity: approximately 200–300 pcs/h Power supply: 230V + compressed air. Weight: 300 kg

Condition: good (used), Schmedt PraForm HHS 20 Book Press Kdodpfx Ajx Ncw Rodwog Book press with groove burner. Very good condition. The machine came from a school. Manufactured by Schmedt, Germany. Technical specifications: Maximum format: 350 x 380 x 110 mm Weight: 250 kg Power supply: 380V Flexible temperature control.

Condition: good (used), Schmedt PraForm HHS 2100 Book Press Ksdpfx Adsx Ncvmswodg Book press with groove cutter. Manufactured by Schmedt, Germany. Technical specifications: Maximum format: 400 x 520 x 100 mm Weight: 250 kg Power supply: 380V + compressed air.

Condition: good (used), Schmedt PraForm HHS 2100 Book Press with joint forming Book press with groove burner. Machine in perfect condition, purchased from the national library. Practically unused. Produced by Schmedt, Germany. Technical data: max format: 400x 520x 100 mm Kdsdpfxswud Tds Adwog Weight 250 kg Power supply 380 V + compressed air.

Condition: good (used), Schmedt PraLeg HHS 1815 XL Case in machine Machine in perfect condition, purchased from the national library. Practically unused. The machine suspends the book block in a prepared hard cover. Two gluers, smooth adjustment of glue thickness. The machine has full documentation with a CE certificate. Format: Block height: 80 – 440 mm Kodswud S Tspfx Adwsdg Block width: 110 – 450 mm Block thickness: 2 – 80 mm Efficiency approx. 200 – 300 pcs/h Power supply 230V Weight 300 kg

Condition: good (used), Schmedt PraForm HHS 2100 book press with joint forming Perfect condition, purchased from a warehouse, used as a backup. Book press with groove burner. Manufactured by Schmedt, Germany. Technical data: max format: 400x 520x 100 mm Weight 250 kg Power supply 380 V + compressed air. Kdjdpfx Aswud Tkedwjg

Condition: new, sheet thickness: 10bending length: 4100upper roll diameter: 330 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered Kdodpfx Ajd Ab Rysdwog - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 13.600,-- - side supports EURO 10.250,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, sheet thickness: 45bending length: 3100upper roll diameter: 480 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 5.100,-- - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 15.150,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) Kdsdpfsd Ab Rcex Adweg We have many references!

Condition: new, bending length: 3100sheet thickness: 45upper roll diameter: 510 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO  - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 15.150,-- Kdedpfsd Ab Snex Adweg We have many references!

Condition: new, sheet thickness: 45bending length: 3100upper roll diameter: 510messurements (LxWxH): 6300 x 2300 x 2590prebending: 35weight approx.: 33500 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine Kdedpjd Ab N Uefx Adweg - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 7.000,-- - metarial feeding table EURO 3.700,-- - oil coiler EURO 800,-- - center support EURO 9.500,-- - side supports EURO 10.200,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, bending length: 2600sheet thickness: 6upper roll diameter: 190 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: Kodsx Twiispfx Adwjdg - variable speed of rotation EURO 4.682,-- - metarial feeding table on request - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 6.600,-- We have many references!

Condition: new, sheet thickness: 8bending length: 3100upper roll diameter: 230 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered Kedpfxed Ab Sae Adwsdg - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 7.070,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: good (used), Year of construction: 2004, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, quill stroke: 100 mm, Universal Tool Milling Machine V/H Manufacturer: Emco Model: FB-4 Year of manufacture: 2004 Control: Heidenhain ND-760 display Technical specifications: ----- • Travel X-Y-Z: 450 x 300 x 350 mm • Clamping surface: 800 x 400 mm • Tool holder: SK-40 • Quill stroke: 100 mm Kdjdpfx Adjx Tzk Rjweg • Milling head swivels ± 90° • Spindle: 50 – 2,500 rpm • Speed selection: 18 steps • Electric central lubrication • Machine lamp • Coolant system • Splash guard enclosure (foldable) • Weight: 1,550 kg • Dimensions LxWxH in mm: 1,485 x 1,500 x 1,700 mm Accessories: ----- • 4x machine leveling feet • Operating manual • Clamping wrench • Counter bearing for horizontal machining • Shaft set for horizontal machining • Table enclosure (currently removed) Two identical machines available, both serviced and partially overhauled in Q4-2025.

Condition: used, Technical details: sheet width - max.: 200 mm plate thickness: 10 mm Knife length: 175 mm round: Ø 20 mm square: 18 mm height over floor: 900 mm machine weight ab.: 200 kg dimension machine xH: 0,73 x 0,66 x 2,3 m Kodsu Icqajpfx Adwodg dimensions L x W x H: Untergestell/Tisch: 0,73 x 0,66 x 0,60 m MECHANICAL HAND LEVER SHEARS Steel construction welded with angle - with base frame -Hand lever length = 1,300mm, with safety lock *

Condition: excellent (used), Year of construction: 2000, Ref:11056 . 2000 Hunkeler VEA 520-K-HHS 3000 Endsheet Paster. For inside & outside gluing of end sheet papers, greetings cards inserts and glue-on mounts. Comprising: 1 x product feed (spare feed arm for large format products) 1 x sheet/card feed Sheet counter PVA cold glue system Kdodox Uwznspfx Adweg Robatech glue system Table delivery Integral compressor I.R. light beam guard Including tools & accessories. Specification: Product sizes, outside gluing, Max: 520 x 310 mm Min: 100 x 70 mm inserting/tipping-in, Max: 320 x 260 mm (with accessories) Offset gluing (for outside gluing only): - Maximum 50 mm from the fold - No restrictions in travel direction Mechanical speed, Max: 8,400 cycles/hr.

Condition: new, sheet thickness: 20bending length: 2600upper roll diameter: 330 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel Kdsdpfod Ab R Aox Adwjg - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 13.600,-- - side supports EURO 9.200,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, bending length: 2100sheet thickness: 6upper roll diameter: 160 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 4.600,-- Kodpfx Adsd Ab Slswsdg - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Year of construction: 2020, condition: new, We are selling brand new bearing TIMKEN HH 840249 005-U/2 VP, packed in a box. Kdsdpfxsl Axp Do Adwjg

Year of construction: 2020, condition: new, We are selling brand new bearing Timken HH 840210 005-U/2 VL, packed in a box. Kdsdpfx Adsl Axnuewog

Year of construction: 1999, condition: used, End sheet tipping machine Hunkeler VEA 520 KS - HHS Year: 1999 Description: - Offline production Kdjdpfjx Eblpsx Adwsg - Photocell protection - Cold glue: HHS C-210 (nozzle) - Hotmelt - Premelter: Robatech Concept 4/2 - Inserting - End sheet tipping - Pressing station - Delivery Max. mechanical speed: up to 8.400 cycles/h Outside gluing max. size: 520 x 310 mm Outside gluing min. size: 100 x 70 mm Inside gluing (inserting) max. size: 360 x 260 mm

Condition: ready for operation (used), power: 134.102 kW (182.33 HP), empty load weight: 21,000 kg, total length: 5,000 mm, total width: 2,120 mm, total height: 2,140 mm, load capacity: 4,00,000 kg, operating speed: 15 mm/s, reverse speed: 49 mm/s, Richtpers voor balken en andere Elektrische aanpassing voor slag (voor repeterend werk) Handmatige aanpassing voor het openen van de buigmatrijs Aangedreven rollen om het werkstuk in te voeren Max ram adjustment: 620 mm Kedpfx Aov Rwfgjdwsdg Max distance between table -- ram: 600 mm (1020 mm without tools)

Condition: new, sheet thickness: 35bending length: 4100upper roll diameter: 540 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Kdedpfxjd Ab N Ie Adwsg Options: - variable speed of rotation EURO 6.940,-- - metarial feeding table EURO 5.100,-- - oil coiler STD - center support EURO 18.750,-- - side supports EURO 17.000,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, sheet thickness: 70bending length: 2100upper roll diameter: 540 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Kdjdpfxed Ab N Se Adweg Options: - variable speed of rotation EURO 6.940,-- - metarial feeding table EURO 5.100,-- - oil coiler STD. - center support EURO 19.500,-- - side supports EURO 10.400,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, sheet thickness: 45bending length: 2100upper roll diameter: 430 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: Kdsdpfx Adod Ab Rneweg - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 3.506,-- - oil coiler   STD. - center support EURO 13.600,-- - side supports EURO 9.600,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, sheet thickness: 13bending length: 4100upper roll diameter: 360 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- Ksdpjd Ab Rujfx Adwjdg - center support EURO 13.600,-- - side supports EURO 12.516,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!