Used High Speed Cutter for sale (48,700)

Condition: good (used), Year of construction: 1998, machine/vehicle number: 1116-147-739, Offer 26155 Technical data: - Electric hydraulic lifting and lowering of the saw bow - Saw blade dimensions: 400 x 30 x 1.5 mm - Cutting range at 90°: - Round: approx. 210 mm - Flat: approx. 240 x 190 mm - Square: approx. 210 x 210 mm - Cutting range at 45°: - Round: approx. 150 mm Gjdpfx Akjzf A Dyoaeug - Flat: approx. 150 x 100 mm - Flat: approx. 130 x 210 mm - Square: approx. 145 x 145 mm - Adjustable stroke speeds and cutting speeds - Stroke rates: 62 / 125 m/min - Average cutting speed: 16 / 32 m/min - Miter adjustable vise with opening width up to 260 mm - Electric coolant system - Drive: 400 V / 1.1 kW - Space requirement: approx. W 500 x H 1250 x D 1200 mm - Weight: approx. 180 kg

Condition: used, Year of construction: 2003, Fully functional ready to use. Please check out our other listing as well Gjdpfowt R Dmox Akaeug

Condition: used, Year of construction: 1995, pressure 100 t stroke 20 - 120 mm no. of strokes 40 - 240 /min distance between columns 1300 mm dayligth (stroke and adjustment up) 670 mm column travel -side 400 mm table surface area 1200 x 800 mm hole in the table 900 x 200 mm table height over floor 1150 mm ram surface 1130 x 650 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1 - 9999,9 mm power requirement 22,0 kW Gujdpfezrpvcex Akasg Weight 16,0 t dimensions (WxDxH) 3,7 x 2,5 x 3,7 m height over floor 3,7 m with infinitely variable PIV-drive, pneumatic clutch/brake combination (make Ortlinghaus), electronic press force monitoring (two channel), automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motorised circular oil lubrication electronic roll feed (make Kaiser, type KWV 250)

Condition: used, Year of construction: 1992, functionality: unexamined, Technical Specifications Make and model: Bruderer BSTA 25 EL Nominal capacity: 250 kN, 25 tons Year of manufacture: 1992 Gjdpfx Akoyktftjajug Year of control upgrade: 2020 Max. number of strokes: 100/1425 Adjustable stroke: 13, 16, 19, 25, 32, 38 mm Table dimensions: 640 x 530 mm Passage between the supports: Longitudinal 640 mm; Lateral 220 mm. Fitted with roll feeder BBV 190/85 on right hand side. Max width of strip: 160 mm Feed length: variable up to 85 mm max Optional: Sound insulating cabin Oil pump. Heat exchange oil cooler. Front and rear safety guards. Fitted on 4 spring feet. Slide/Ram adjustment: 51 mm Documentation included. Press weight cca. 5000 kg.

Condition: used, Year of construction: 1997, Press capacity: 315 ton Ram stroke adjustable: 30 - 100 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 370 mm Table surface area : 1600 x 1100 mm Slide area: 1600 x 1100 mm Hole in table: 600 x 180 mm Number of strokes: 15 - 180 s.p.m. Table height over floor: 1200 mm Required power: 170 kW Height over floor approx.: 4900 mm Dimensions L x W x H: 4900 x 1900 x 4900 mm Weight of machine approx.: 55 ton Gusdeuqd Tmjpfx Akajg Standard configuration The press was converted to CE standard in press was 2021 converted to a SIEMENS S7 control conveyor system still has a SIEMENS S5 control system. Extended machine accessories Die lifters in the table Automation Feeding unit KEMMERICH consisting ofDecoiler levelling machine roll feeder Coil loading car

Condition: new, Year of construction: 2025, Flowshrink machine for high-speed packaging of products in a special range of product sizes. Double drive longitudinal sealer system ensures firm and smooth longitudinal sealing. "Blade Position Adjusting on Power-Off" function. Servo drive system ensures precise and stable performance. Very economic alternative to side sealing systems when less flexible product sizes are used. - Specifications: packaging sizes: L(100-300)xW(30-100)xH(2-100)mm; sealing bar width: 230mm; max. speed of the machine in neutral: 100 cycles/minute; power: 220V, 3.75kW; infeed length: 3000mm; machine dimensions: L5050xW1190xH1650mm; weight: 1020kg. Gusdpfx Akev Nl Iajasg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, PRO-version shrink tunnel to heat shrink products with polyolefin film in higher speed. Suitable to be combined with AMTEC Shrink Wrapper speed shrink W40L (vertical) PRO-version and AMTEC Shrink Wrapper SIDEshrink W60XL PRO-version. Conveyor speed: 0-30m/min. Adjustable air flow, suitable for large products and/or high speed packaging (recommended for SIDEshrink and FLOWshrink machines). - Max. product dimensions: L(unlimited)xW400xH300mm; tunnel size: L1700xW450xH350mm; machine dimensions: L2200xW1000xH1330mm; power consumption: 380V, 16kW. Gujdpjv Nl Uyjfx Akaog Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, stroke length: 38 mm, input voltage: 400 V, punching force: 25 t, Bruderer BSTA 25USL with BBV 190/85 roll feed, Gedpszlqhyefx Akaeug - year of mfg. 2000 - Tool area 750mm - Adjustable stroke 13 to 38mm - complete documentation - Soundproof cabin - Machine checked, in very good condition! contact us!

Condition: good (used), Year of construction: 1983, Stock number: 3005 Manufacturer: HKS Singen Year of manufacture: 1983 Machine number: 401044 Model: HKS 40 Gjdpfowu Ilwex Akajug Drilling capacity: 40 mm Spindle taper: MK 4 Speed range: 26 to 1,940 rpm Feed: 0.05 to 0.45 mm/rev Table: 1,520 x 740 mm Clamping surface: 1,370 x 610 mm Outreach min/max: 400 / 1,120 mm Stroke: 200 mm Swiveling range: 360° Vertical adjustment of arm: mm Horizontal adjustment of arm: 720 mm Accessories: Connection: 6.5 kW Footprint: 1,500 x 1,100 mm 2nd plate: 1,500 x 1,000 mm Dimensions: 1,800 x 1,600 x 2,700 mm Weight: 2.3 t

Condition: used, Year of construction: 1999, High-performance Wire-O coil cutter from Renz Adjustable number of loops Godpfxstp Ra Ie Akasug Adjustable speed incl. various guide rails for the most common Wire-o diameters 5/8 , 7/8 , 3/4 , 3/16 etc. ..... + transport gears 2:1 and 3:1 Price plus VAT. EXW. All information without guarantee. Subject to prior sale. Dealer transaction. The sale takes place under exclusion of any warranty.

Condition: used, Year of construction: 1968, Donau high-speed radial drill type DR 32 Speed: 60 - 1800 rpm Arm reach: 600 mm Base plate: 100 x 1400 x 110 mm Thread cutting device Coolant system Gsdpfex Hgkvex Akajug Machine lamp Quick-change holder with inserts Machine vice

Year of construction: 1985, condition: like new (used), Wanzke hydraulic high speed press SP/F12 double column press. -WKG 499- Offered here is a hydraulic high-speed press from the company Wanzke. This press is in mint condition! There are 2 presses on one stand. Technical data: Manufacturer: Wanzke Type: SP/F 12 Pressing force: 120 KN Retracting force: 17,8 overrun time: 0,028 sec year of construction: 1985 Main drive: 1,5kW / 1,5kW Mains voltage: 380V 50Hz Control voltage: 220V 50Hz Overtravel: 2,8mm safety distance: 4mm Strokes/min: Working stroke: 10mm/sec. rapid traverse: 20mm/sec Max.stroke: 100mm Table area: 320 x 300 x 280mm Accessories: Double decoiler type GMD1 Gedpohgiwnefx Akasug Digital function control "Tronic press" with full upgradeability to CNC control. There are 2 pieces in total!

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0509, 🔧 Key Features Continuous Operation: Designed for uninterrupted processing, ensuring efficient separation of solids and liquids. High Separation Efficiency: Capable of achieving significant separation of solids, oil, and water, with capacities up to 30 m³/h, depending on the model. Robust Construction: Built with durable materials, such as 304 stainless steel for product contact parts, ensuring longevity and resistance to corrosion. Advanced Control Systems: Equipped with PLC control panels featuring user-friendly interfaces for precise operation and monitoring. Guedpfxswnx Ngj Akaeg

Condition: used, Year of construction: 1987, We are offering this used Donau DR 40-Z high-speed radial drilling machine, year of manufacture 1987. Manufacturer: Donau Model: DR 40-Z Serial number: 1146-3 If you have any questions or require further information, please feel free to send us a message. The machine is located in Osterode/Harz. Viewing can be arranged by appointment. Gusdey Dn E Nopfx Akaog This is a used machine, therefore we sell under exclusion of any warranty.

Condition: used, Year of construction: 1991, spindle mount: MK 4, Work table 600mm x 1200mm Arm travel 600mm Gedjx N Iftspfx Akaoug Tool holder MK 4 Drilling capacity 40mm in steel Thread cutting device Coolant system Documentation

Condition: good (used), functionality: fully functional, quill stroke: 190 mm, spindle speed (min.): 41 rpm, spindle speed (max.): 1,800 rpm, overall weight: 1,920 kg, workpiece weight (max.): 17 kg, sheet thickness steel (max.): 32 mm, torque: 250 Nm, table height: 900 mm, branded DONAU high speed radial drilling machine type DR 32 - completely overhauled by vaumatec in 2022 - with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain as well as 4 adjustable feet to relieve the table frame) Technical data: Drilling capacity into solid material: St 60/E335 mm Ø 32 (at feed rate 0.20 mm/rev): GG 22 mm Ø 45 Thread cutting: St 60/E355 M26 Thread cutting: GG22 M35 Tool holder: MK4 Column diameter: mm Ø 195 Distance between spindle nose and table: min./max. mm 260/660 Work table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds Speed series I : rpm. 41-1800 Feed rates: mm/rev 0.1-0; 15-0; 20-0.3 Torque at the spindle: max. Nm 250 Guedpjrn Riqofx Akaog Smooth running of the boom: Radial N 25 Smoothness of the arm: Axial N 25 Clamping effect: Radial Nm 3500 Clamping effect: Axial N 5500 Feed force: N 7500 Max. permissible mass: kg 17 Max. permissible moment of inertia: kgm 0.002176 Workpiece: max. table load: kg 1000 Center of gravity: in the middle of the work surface

Condition: good (used), Kliklok Concorde K170 cartoner in nice condition. Has come from major UK food factory so has been very well maintained. Several change parts may be available with this machine. Guodpfenmv N Sjx Akasg

Condition: used, Year of construction: 2011, operating hours: 20,155 h, functionality: fully functional, machine/vehicle number: E807024, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 30,000 rpm, spindle speed (min.): 3,000 rpm, table width: 600 mm, table length: 850 mm, total height: 2,750 mm, total width: 2,870 mm, total length: 3,390 mm, type of input current: three-phase, workpiece weight (max.): 800 kg, overall weight: 7,500 kg, distance table to spindle center: 560 mm, input current: 63 A, For sale: a professional, high-speed machining center of the HSC (High Speed Cutting) class. The machine's main advantage is its exceptionally efficient spindle, reaching up to 30,000 rpm, mounted on a precise HSK-50E taper. Combined with a rigid and heavy construction (weight approximately 7,500 kg), the machine guarantees perfect surface quality, rapid milling speeds, and the ability to operate stably with micro-tools. An ideal choice for the precise machining of molds, dies, aluminum parts, light metals, and plastics. Technical specifications: Spindle and drive (main HSC advantage): • Spindle speed: 3,000 to 30,000 rpm (High Speed Cutting) • Spindle taper: HSK-50E (ensures excellent balance and safety at high speeds) • Spindle motor power: 15 kW Dimensions and working area: • Table dimensions: 850 x 600 mm • Maximum, uniform table load: 800 kg • Dimensions of T-slots: 16 mm x 5 pcs. Gedpfx Aozuzp Hokajug • Footprint (overall dimensions): 3390 x 2870 x 2750 mm Travel ranges (axes): • X-axis travel: 800 mm • Y-axis travel: 600 mm • Z-axis travel: 400 mm • Distance from spindle to table surface: 160 – 560 mm Dynamics and accuracy: • Positioning accuracy: ±0.005 mm • Positioning repeatability: ±0.0015 mm • Maximum working feed rate: 20 m/min • Maximum rapid feed rate: 30 m/min Tool magazine and media: • Tool magazine capacity: 16 tools • Maximum tool diameter: Ø20 mm • Dielectric fluid tank capacity: approx. 200 liters Power supply and installation: • Power requirement: 45 kW • Preferred fuse rating: 63 Amp (time-delay “C”)

Condition: new, Year of construction: 2026, drilling capacity: 40 mm, throat depth: 1,220 mm, spindle speed (min.): 110 rpm, spindle speed (max.): 2,900 rpm, overall weight: 1,710 kg, spindle stroke: 200 mm, spindle mount: MK 4, Drilling capacity in St 60 40 mm Drilling capacity in GG 20 40 mm Thread cutting (St 60 / GG 20) M 27 / M 36 Tool holder short spindle MK 4 Projection center spindle / column min. - max. approx. 210 - 1220 mm Clamping surface machine table approx. 1200 x 510 mm T-slots in the machine table: Number x width 3 x 18 mm Distance drill spindle - table min. - max. approx. 375 - 675 mm Gujdpfxjtzkmbs Akaeg Distance drill spindle - base plate (= option) min. - max. approx. 1075 - 1375 mm Spindle stroke approx. 200 mm Feed rates approx. (4) 0.08 - 0.1 - 0.2 - 0.3 mm / U Speed range of the main spindle: infinitely variable 110 - 2900 rpm Dimensions (height x width x depth) approx. 2500 x 1200 x 1710 mm Net weight approx. 1710 kg Drive power spindle motor 400 V, 50 Hz approx. 2.2 / 4.0 kW

Condition: good (used), BSTA 30 / 600 spm Bruderer Feed BBV 120/60 Press force max. 300 KN Power consumption from 1.5 to max. 5.5 KW Technical Air 6-10 bar Operator’s instruction Bed opening 250 mm +/-20mm Stroke: 8-40 mm Strokes per minute.: Max. 600 spm variable from 100-600 spm With Automatic central lubrication Main shaft cooler Pneumatic clutch and pneumatic brake Three working mode Programmable speed and number of strokes, Reverse flywheel mode Feeding of strip from left to right or right to left Strip pushing or pulling Gujdpfjda Ha Nox Akaog Roll feed BRUDERER BBV Strip width ca. max. 190 mm Feeding pitch ca. max. 60 mm Strip max. thickness 3,5 mm Distance between columns 325 mm Table height from floor 1000 mm Table surface area 540 x 300 Hole in the table 315 x 110 mm Ram surface dia. 250 mm Weight ca. 3.000 kg Dimension ca. 1100 x 1.400 x 2.200 mm Feed pitch up to max. 60 mm adjustable, highly accurate(tol. 0.02 mm) Emergency stop and all other CE safety guards and relays Indexing per minute, infinitely variable Automatic in feed, fully synchronized with punching moment More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Gusdpfxjyhdvko Akaeg Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Year of construction: 1985, condition: like new (used), Wanzke hydraulic high speed press SP/F12 -WKG 499- Offered here is a hydraulic high-speed press from the company Wanzke. This press is in mint condition! Technical data: Manufacturer: Wanzke Type: SP/F 12 pressing force: 120 KN retraction force: 17,8 overrun time: 0,028 sec year of construction: 1985 Main drive: 1,5kW / 1,5kW Gujdpfxohgiyis Akaog Mains voltage: 380V 50Hz Control voltage: 220V 50Hz Overtravel: 2,8mm safety distance: 4mm Accessories: decoiler GM1

Condition: excellent (used), Superb condition, currently part of line in production with robotic top load machine picking cereal bars which are then loaded into this machine. Videos of line are available upon request. Can be seen running until near end of August 2023 Guodpfx Akenmv Rajaog

Condition: used, Year of construction: 2004, pressure 80 t stroke 16 - 63 mm no. of strokes 100 - 750 /min distance between columns 970 mm dayligth (stroke and adjustment up) 380 mm column travel -side 380 mm table surface area 940 x 910 mm hole in the table 770 x 190 mm table height over floor 1180 mm Gujdpfezrpq Hsx Akaog ram surface 940 x 510 mm ram adjustment 76 mm material width 203 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 37,0 kW Weight 14,50 t dimensions of the machine ca. 2,7 x 1,7 x 3,6 m with infinitely variable drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK 01/0800

Condition: good (used), Year of construction: 2001, The machine will be delivered including a new replacement spindle. Digma HSC 500, year of manufacture 2001, Guodpfx Aksy A H Tpjajg Heidenhain iTNC 530 control, travel X/Y/Z 500/400/350 mm, spindle speed up to 42,000 rpm, tool holder HSK 40, laser diameter measurement, oil mist lubrication system, extraction for graphite machining, 3D infrared measuring probe, The tool cannot be released from the spindle; according to the service technician, this is not a spindle problem but a hydraulic issue. A new HSC replacement spindle is included.