Used Hitachi Zx 22 U for sale (117)

Condition: ready for operation (used), functionality: fully functional, gearing type: hydrostat, fuel type: diesel, tire size: 20.5R25, tire condition: 70 %, number of seats: 1, shovel volume: 2.6 m³, Year of construction: 2016, operating hours: 4,855 h, Equipment: additional headlights, all wheel drive, cabin, Hitachi ZW180-5B wheel loader Year: 2016 4,855 operating hours Quick coupler Centralized lubrication No ADBLUE Cgodpfx Agjydflfjkjp All maintenance performed by official Hitachi service

Condition: used, Year of construction: 2022, total length: 4,985 mm, drive type: Diesel, construction width: 1,650 mm, Wheel loader Technical condition: New Front tires type: Pneumatic Front tires Size: 12.5/80 Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Cgjdpjumy Apofx Agksp Bulk material bucket, pallet forks

Condition: used, Year of construction: 2022, total length: 4,985 mm, drive type: Diesel, construction width: 1,650 mm, Wheel loader Cgjdpfxsumy Avo Agkjp Technical condition: New Front tires type: Pneumatic Front tires Size: 12.5/80 Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Bulk material bucket, pallet forks

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: TF250023, turning length: 1,100 mm, turning diameter: 320 mm, TECHNICAL DETAILS Turning diameter: 320 mm Turning length: 1,100 mm MACHINE DETAILS Cgjdpfoxrc D Tsx Agkep Control: SEICOS EQUIPMENT Tailstock

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning diameter: 450 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 215 mm, travel distance Z-axis: 400 mm, bar diameter (max.): 51 mm, workpiece length (max.): 380 mm, TECHNICAL DETAILS Capacity Turning diameter: 450 mm Maximum machining diameter: 340 mm Maximum machining length: 380 mm Bar capacity: 51 mm Travel Range X-axis travel: 215 mm Z-axis travel: 400 mm Spindle Spindle speed: 30 – 5,000 rpm Cgsdpfx Aexrc Dgegkjp Spindle nose (Type No.): A2-6 Spindle bore: 59 mm Spindle bearing inner diameter: 100 mm Turret Tool positions: 12 Gripper: 25 mm Drill holder diameter: 32 mm Feed Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Cutting feed (per revolution): 0.001 – 500 mm/rev Feed rate: 0 – 2,000 mm/min MACHINE DETAILS Control: Seicos Machine weight: 4,600 kg Motor Spindle motor (50% duty cycle / continuous): 11 / 7.5 kW Feed motor X-axis: 4 kW Feed motor Z-axis: 4 kW Turret indexing motor: 2.2 kW Guideway lubrication pump: 18 W Spindle coolant pump: 370 W

Condition: used, power: 167 kW (227.06 HP), empty load weight: 14,600 kg, Year of construction: 2003, operating hours: 7,200 h, fuel: diesel, Construction equipment - Wheel loader Cgsdpfsx Hkz Ejx Agkjp

Condition: defective spare-parts repository (used), functionality: not functional, power: 175 kW (237.93 HP), operation weight: 21,500 kg, Year of construction: 1999, operating hours: 23,000 h, The machine's engine is broken. Cgjdswankdjpfx Agksp

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, bar diameter (max.): 42 mm, TECHNICAL DETAILS Bar capacity: 42 mm Turret: 16 positions, driven Tool holder: VDI 30 MACHINE DETAILS Control: Seicos EQUIPMENT - Tailstock - Tool Eye Csdpfxjwtrapo Agkegp - Parts catcher - Driven tools

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: VM43182E, travel distance X-axis: 560 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel distances x-axis: 560 mm y-axis: 450 mm z-axis: 450 mm Table Table surface: 760 x 410 mm Cgodswm I N Tspfx Agkep Spindle Speed range: 8,000 rpm Dimensions Dimensions: 2.16 x 2.32 x 2.37 m

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, table width: 1,000 mm, table length: 450 mm, TECHNICAL DETAILS Cgedpfx Ajw A Rtmegksp Travel Paths X-axis travel: 1,000 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Spindle and Tool Tool holder: ISO 40 Number of tool positions in magazine: 30 Spindle speeds – stepless: 0 – 12,000 rpm Table Pallet size: 1,000 x 450 mm Feeds Feed rate stepless: 0 – 30,000 mm/min Rapid traverse: 30 m/min Control: Fanuc 18 M MACHINE DETAILS Electrical Data Total connected load: 32 kVA Total power requirement: 15 kW Dimensions & Weight Machine weight approx.: 6.5 t Required floor space approx.: 3.5 x 2.5 x 2.4 m

Condition: ready for operation (used), Year of construction: 1997, machine/vehicle number: 45296, Axis:XYZ (3-axis) Max. Travel: 500x450x400 Tool:CAT-50 Control:SEICOS A10M Dimensions: 2200x3180x2500mm Cjdpfx Ajttm Ufsgkogp

Condition: good (used), Year of construction: 2000, functionality: fully functional, operating hours: 10,000 h, travel distance X-axis: 680 mm, travel distance Y-axis: 680 mm, travel distance Z-axis: 680 mm, number of slots in tool magazine: 60, table width: 500 mm, torque: 237 Nm, nominal power (apparent): 25 kVA, rapid traverse X-axis: 45 m/min, spindle speed (min.): 12,000 rpm, Equipment: chip conveyor, Hitachi Seiki HS 500 horizontal machining center for sale by user due to conversion. The machine was only used for specific work (medical technology) and mainly machined aluminum and stainless steel. Considering its age, it is in very good condition with a cycle time of around 10,000 hours and 27,000 hours of operation. Cgedpfovnl Drjx Agksp Sigma control (FanuC) 2 - pallets 500 x 500 mm, Technical data see PDF. Inspection under power is possible. Clamping devices are not included with the machine!

Condition: used, Year of construction: 2001, x-travel 600 mm y-travel 580 mm z-travel 580 mm control SEICOS 16M B-axis (table) 360 x 1° mm feed X/Y/Z/-axis 1 - 50.000 mm/min rapid traverse X/Y/Z 50,00 m/min turning speed range - stepless 35 - 12.000 Nm spindle drive 22,00 kW max. torque on the spindle 236 tool taper BT40 toolpiece magazine: chain magazine 61 Stück size of pallet 2x 400x400 mm max. workpiece diameter 630 mm workpiece height max. 680 mm workpiece weight max. 400 kg total power requirement 30,00 kW weight of the machine ca. 12,00 t dimensions of the machine ca. 4,00 x 3,50 x H3,00 m Cjdpfxjw A Amfs Agkjgp With SEICOS S16M control unit, coolant system, chip conveyor, electron. handwheel, dust exhauster.

Condition: used, color: other, Year of construction: 2007, operating hours: 7,514 h, Power internal combustion engine: 187 HP (138 kW) GVW: 11.500 kg Make of engine: ISUZU Lifting capacity: 6.500 kg CE mark: yes Serial number: HCM81U00T00030124 Machines for Sale! Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. Cgjdpfsr Epviex Agksp All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly.   We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines. 

Condition: new, functionality: fully functional, Year of construction: 2024, * New machine * Mitas 405/70 R18 tires * 1st auxiliary hydraulic circuit * Hydraulic equipment for 1st auxiliary circuit * Permanently engaged 1st auxiliary circuit * Comfort seat with mechanical suspension * Storage box with lid * Hydraulic quick coupler * Standard bucket and forks Cgedpfx Agowlz H Nokop Technical specifications: - Operating weight (in kg): 5,410 - Cab: ROPS and FOPS safety cab - Engine power (kW): 55.4 (Stage V) - Bucket capacity (in m³): 1.0 - Max. pump flow rate (in l/min): 3,270 - Bucket pivot point (in mm): 2,400 - Dump height (in mm): 40.0 - Tipping load (straight) (in t): 3.68

Year of construction: 2023, condition: good (used), functionality: unexamined, machine/vehicle number: SRV54341, Ladies and Gentlemen, We are selling the Hitachi FT230 XRF analyzer described and photographed here. Cedpeuwkr Defx Agkegp Excerpt from the manufacturer: Each individual element of the FT200 series has been developed to drastically reduce the analysis time. Automated focusing reduces sample loading time Intelligent recognition with the Find My Part™ function automatically sets up the complete measurement routine Sample view is displayed over a large part of the screen for excellent visibility Self-diagnostics confirm the condition and stability of the device Seamless integration with other software and easy data export Intuitive and easy to use thanks to a new user interface Powerful: simultaneous measurement of up to four layers and substrates Designed for demanding production or laboratory environments Complies with ASTM B568 and DIN ISO 3497 standards Supports you in meeting the specifications for ENIG (IPC-4552B), ENEPIG (IPC-4556), Immersion Sn (IPC-4554) and Immersion Ag (IPC-4553A) Further information: Detector: Silicon Drift Detector (SDD) Element range: Al (13) - U (92) Stage travel: 250 x 200 mm Motorized Z-axis movement: 205 mm Maximum sample size: 500 x 400 x 150 mm Laser focus: Standard Coating thickness analysis: possible RoHS screening: possible Further information and images of the machine are available on request. Disclaimer The machines offered are sold "as is" and "without warranty". Any express or implied warranties, including, but not limited to, warranties of merchantability or fitness for a particular purpose, are hereby expressly disclaimed. Seller assumes no responsibility for the operability, reliability or accuracy of the machine. It is the buyer's responsibility to thoroughly inspect the machine prior to purchase and ensure that it meets his requirements. Any descriptions or specifications of the machine are for information purposes only and may contain inaccuracies or errors. The seller shall not be liable for any such inaccuracies or errors and assumes no obligation to update or correct such information. Buyer agrees that Seller shall not be liable for any damages or losses arising directly or indirectly from the purchase, use or inability to use the machine, including, but not limited to, lost profits, business interruption or consequential damages. Any repairs or modifications to the machine after purchase are the sole responsibility of the buyer. Seller shall not be liable for damages caused by improper repairs or modifications. By purchasing the machine, the buyer expressly agrees to the terms of this disclaimer and waives any claims against the seller in connection with the purchase or use of the machine.

Condition: repair required (used), functionality: limited functionality, A used Ink Jet Printer suitable for parts or repair - unit does power up - see error messages in the pictures attached Cgsdpet Amk Esfx Agkop