Used Screwdrivers for sale (121)

Condition: used, Zucchelli 9 Screwdrivers in stock to store or use for spare parts. Hfsdper H Tk Iefx Aaben

Year of construction: 2020, condition: new, machine/vehicle number: 6159326350, We are dissolving part of our demonstration tool inventory: Desoutter ESP1 control for SLBN low-voltage screwdrivers Year of manufacture: 11/2020 Article no.: 6159326350 new, fully functional without additional accessories Suitable for the following Desoutter screwdrivers:# -SLBN003 -SLBN010 -SLBN012 -SLBN020 Hedpfx Aaev Iqcgsbsfn The ESP1 control was developed to optimize the performance of Desoutter screwdrivers and offers two speed ranges while reducing energy consumption. Advantages: With 2 speed options, the ESP1 offers flexibility to optimize your screwing process and ensure lasting quality. Compatible with 100V or 240V inputs for a standardized platform, faster readjustments and lower total cost of ownership. Other tools for industrial manufacturing and maintenance on request.

Year of construction: 2016, operating hours: 3 h, condition: excellent (used), machine/vehicle number: 6159327080, We are dissolving part of our demonstration tool inventory: Desoutter extended control ESP2-A for SLBN low-voltage screwdrivers Year of manufacture: 09/2016 Article no.: 6159327080 little used, fully functional without additional accessories Suitable for the following Desoutter screwdrivers:# -SLBN003 -SLBN010 -SLBN012 -SLBN020 -SLBN030 -SLBN050 -SLBN090 -SLBN120 The ESP2A is designed to optimize the performance of Desoutter SLBN screwdrivers, reduce your energy consumption and offer up to five program settings and PLC integration, including remote start and tool activation. In addition to the OK/NIO and group IO reporting, the ESP2A offers a wide range of rundown options including pre-run reversal, slow start, tightening phase and post-run reversal. Hsdpfxov Ipnzj Aabofn Benefits Two tools can be connected to one ESP2A, offering unmatched flexibility and reduced installation costs. Improved production integration and traceability functionality to improve your product quality. Compatible with over 15 tools for a standardized platform, faster readjustments and lower total cost of ownership. Five cycles with 3 possible phases each offer versatility no matter where your production is headed. Multiple preset tightening strategies to replace multiple tools with a single one for a quick return on investment. Available in both lever-start and push-start tools from 0.07 N.m to 12 N.m with a full range of accessories for all your tightening needs. Fully compatible with a range of accessories to optimize your tightening process and ensure continued quality. Other tools for industrial manufacturing and maintenance on request.

Year of construction: 2018, condition: new, machine/vehicle number: 6159327070, We are dissolving part of our demonstration tool inventory: Desoutter ESP1-HT PLUS control for SLBN low-voltage screwdrivers Year of manufacture: 04/2018 Article no.: 6159327070 used, fully functional without additional accessories Suitable for the following Desoutter screwdrivers:# -SLBN090 Hodpfov Iqfzox Aabjfn -SLBN120 ESP1-HT PLUS The ESP1 control was developed to optimize the performance of Desoutter screwdrivers and offers two speed ranges while reducing energy consumption. Advantages: With 2 speed options, the ESP1 offers flexibility to optimize your screwing process and ensure lasting quality. Compatible with 100 V or 240 V inputs for a standardized platform, faster readjustments and lower total cost of ownership. Other tools for industrial manufacturing and maintenance on request.

Condition: new, functionality: fully functional, Inline Screwdriver Station with Reaction Arm (Higher Torque) This station is designed for medium to high torque fastening applications, using an inline electric screwdriver mounted on a reaction arm for enhanced precision and ergonomics. Controlled by a Desoutter CVI3 Vision Controller, it offers advanced tightening strategies, real-time data logging, and full integration with plant networks via Profinet. The screwdriver delivers accurate torque and angle feedback, suitable for applications up to approximately 12 Nm. A positioning reaction arm with encoded axes ensures proper tool alignment and absorbs reaction forces, improving operator comfort and process consistency. Hedpfowduq Esx Aabsfn

Condition: used, Year of construction: 2018, 0 ja Working width 3000 mm 0 nein Eder + Mueller fitting centre for windows ----- Sale on behalf of the customer from the customer's location. The machine was in use until closing and is now at the customer's warehouse. Previous hardware: Maco Multi Matic (other hardware is also possible) Technical manufacturer's description: ----- Hfodoxmamuepfx Aabsn Table height and working angle mechanically adjustable with permanently mounted hardware bearing Sash stop table, length 3,000 mm, with fixed hardware bearing Felt-bonded support 12 pivoting counterholders for hanging the sashes Hardware detection for centered and constant gear position 1 storage unit with 4-way air connection with automatic special screwdriver with pneumatic depth stop 6-way turret stop for different screw depths Pneumatic height adjustment for 6 screw levels Automatic screw feed Manual insertion for a second screw length Dimensions: Length approx. 3,500 mm, depth approx. 2,200 mm, height approx. 2,100 mm ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net, plus VAT.

Condition: used, power: 95 kW (129.16 HP), fuel type: diesel, Year of construction: 2007, operating hours: 13,800 h, Drive: Wheel Empty weight: 18.000 kg Auction item. Excavator in working condition. Key is broken, starts with a screwdriver. One cylinder of the blade leaks oil. Worn out pump, efficiency at high load about 90%. Hfsdpfx Aaoxmhpdsbsn There may be more defects because it has not been used for a while.

Condition: used, Vibratory bowl feeder / sorting device / bowl feeder / vibratory feeder RNA Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type SRC-B200-2R Year of manufacture: approx. 2000 Pot diameter top: 300 mm Bowl diameter bottom: 180 mm Inner height of bowl: approx. 45 mm Sorting track width: approx. 5 mm Total height (drive + bowl with sorting track): 260 mm Mains connection: 230 Volt, 50 Hz. - Control unit RNA, type ESG 90 for adjustable vibration speed - The conveyor was used to feed automotive fuses Space requirement Ø x H: 300 x 260 mm Weight: 14 kg good condition A bowl feeder always consists of two main components. Hfsdpfeu Ailgsx Aabon 1) Sorting bowl, in which the parts are aligned 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations and thus sets the parts in motion.

Condition: used, Year of construction: 2018, CNC machining center ELUMATEC SBZ 607 equipped with 11 tool stations (9 motors + 2 screwdrivers), designed for all main standard machining operations on window and door profiles. It enables milling operations such as drainage slots, lock cases, recesses for mounting plates, ventilation holes, as well as drilling for reinforcement brackets, transoms, tilt-and-turn locks, pins, and accessories. It is also prepared for free-form milling of gasket grooves and marking of closing components. Technical specifications: Hjdpfxoxltxhs Aabsfn Tool stations: 11 Maximum profile length: 4,000 mm Maximum profile depth: 400 mm Spindle speed: 24,000 rpm Perfectly suited for the complete processing of aluminum or PVC profiles, ideal for window and door manufacturers or industrial producers.

Condition: new, Year of construction: 2025, Workshop workstation with adjustable worktop height – Workbench PowerLift Concept M We offer a professional workshop workstation – PowerLift Concept M. A robust, height-adjustable table designed to meet the needs of demanding users. Key product features: Adjustable worktop height: Reliable mechanical height adjustment allows you to set the working height to individual requirements, ensuring ergonomic and comfortable working conditions. Solid construction: Made of top-quality materials, guarantees stability even under uneven load distribution. Load capacity up to 500 kg: Designed to handle heavy tools and materials, ideal for intensive use. Hsdpfeww Axqjx Aabsfn Mobility: Extendable castors allow for easy movement of the workstation within the workshop, without compromising stability during operation. Lighting: Equipped with a professional lamp featuring adjustable light intensity, controlled locally by a dial or through a building management system. Standard configuration includes DALI system lighting. Electrical panel: Standard features include an emergency stop button, three 230V sockets, and a light intensity controller, enhancing both functionality and work safety. An additional fourth socket is located beneath the worktop. Tool board: Perforated panel enables convenient tool organization, helping to keep the workstation tidy. Why choose PowerLift Concept M? As a renowned manufacturer of workshop tables, Karnatech offers a product that is 100% made in Poland, characterized by outstanding quality and attention to detail. The PowerLift Concept is an investment in a durable and functional workstation that will meet the expectations of even the most demanding professionals. Height adjustment range: approx. 760–1130 mm Height adjustment of both the worktop and tool board is carried out mechanically using the included folding crank or any standard power screwdriver. Contact and additional information: Power Lift Concept M is one of several models in our range of workbenches. For more information, please visit the Karnatech website. We invite you to contact us by email or phone for detailed information and to place an order. We also offer the option to build a workstation tailored to your individual requirements.

Condition: new, Year of construction: 2021, operating hours: 1 h, functionality: fully functional, overall weight: 20 kg, load capacity: 5 kg, arm reach: 850 mm, At Automex, we don’t just supply robots – we use them daily in our own production. This hands-on experience enables us to confidently recommend only solutions that truly work. Universal Robots UR5 – Collaborative Robot (Cobot) ----- €16 000 net ----- Condition: Brand new, factory-sealed unit 0h ! Year of manufacture: 2021 Warranty: Full start-up warranty – all functions tested and certified Origin: Original production by Universal Robots, Denmark Delivery: Price includes shipping to any location within Europe Hedpfoxf Ic Ujx Aabsfn The UR5 is a highly flexible and compact collaborative robot, perfectly suited for applications that require precision and agility with a medium payload. Its ease of programming, rapid deployment, and wide ecosystem of accessories make it one of the most popular cobots in the world. Ideal for assembly, machine tending, screwdriving, testing, and packaging tasks in dynamic production environments. Technical specifications (UR5): Payload: 5 kg Reach: 850 mm Degrees of freedom: 6 rotary joints Repeatability: ±0.03 mm Robot weight: 20.6 kg Power consumption: approx. 250 W Mounting options: floor, ceiling, or wall Programming: intuitive URCaps environment + integration with external systems (ROS, Modbus, Ethernet/IP, PROFINET) Safety functions: compliant with ISO 10218-1 and ISO/TS 15066 The Universal Robots UR5 has been designed for safe human-robot collaboration. It combines flexibility, reliability, and user-friendly operation, making it the perfect solution for companies aiming to increase productivity while keeping automation simple and cost-effective. We offer a full range of Universal Robots cobots as well as used units from brands such as AUBO, YASKAWA, and ABB. Please feel free to inquire! The cobots shown are used in Automex production and may be a different model than the one proposed in the advertisement.

Condition: new, 0 ja Working width 3000 (3500) mm 0 ja Ruchser RU-BM-3000 (option: 3500) Wing assembly table ----- Herstellerbeschreibung: Item 1.0 Article 0610000 RU-BM-3000 Sash assembly table, for sashes up to max. 2500 mm height with RU-SH, special screwdriver length 3000 mm, width 1400 mm, inclination of working platform manually adjustable. Usable width 2500 mm Holder for hardware shears or hardware punch. 10 swivel-mounted pendants for hanging the sashes, completely pneumatically foldable for unhindered movement of the sashes on the table surface. Hodpfx Aot Tq Aaoabofn Device for scanning the sash fitting length for constant and variable/centered handle fit and any handle fit height for pre-drilled sashes, colour-coded dimension recognition for the fittings. Pendulum height can be set to 50 or 60 mm on one stop. RU-SH, special screwdriver with pneumatic depth cut-off mounted on carriage, safety control, pneumatic height adjustment, screw feeder with automatic switch-off of the filling container manual insertion for a second screw length on the special screwdriver, accessories. RA-8, turret stop for 8 screw levels mounted on the carriage. RA-4 commuter rail manually adjustable in depth against left and right one 4-fold turret stop each. PSF - Pneumatic clamping device for sashes against the lateral stops. Working height adjustable from 900 - 1000 mm. Please specify whether felt, sliding or brush strips should be used as a support. Item 1.1 Article 6315 RU-BM-... adjusted to customer's fitting specification Item 1.2 Article 0500000 Holder adjusted to customer punching press/ shear For mounting a customer-supplied punching press or shear (other manufacturer) on the sash assembly table. Please specify make when ordering !!! ----- Price RU-BM-3000 in the above version ex works: on request! ----- Fitting bearing options for RU-BM-3000: ----- Version with fixed fitting bearing: Price EUR 3,363.00 Article 0630000 RU-BL-30/30 Fixed fitting storage unit Mounted above the leaf assembly table Length 3100 mm, depth 1250 mm, with 3 shelves with 10 compartments each, divided by partitions. Freestanding version: Price EUR 5,291.00 Item 0710000 RU-SBL3000/30 Freestanding storage unit, Length 3100 mm, depth 1250 mm, height 2050 mm, upright frame on the front without supports, 30 compartments, 10 in a row, each divided by partitions and a continuous shelf at the top, size of the compartments: width 280 mm, height 150 mm 4 pcs. Angle supports for corner deflections: Price 614.00 EUR Side length 120x120mm; inclination approx. 3° The front edge of the angles is bent up 5mm to prevent accidental unloading. 2 pieces on the left and 2 pieces on the right under the first shelf of the fitting. ----- Surcharge for RU-BM-3500 ----- Article 0610300 RU-BM-3500 Sash assembly table for sashes up to max. 3000 mm height with RU-SH, special screwdriver length 3500 mm, width 1400 mm, inclination of working platform manually ble width approx. 3000 mm Surcharge RU-BM 3500 to RU-BM 3000: EUR 2,831.00 Fitting bearing for RU-BM-3500 (only free-standing possible): Price EUR 6,714.00 Item 0710007 RU-SBL3800/36, free-standing fitting storage Length 3800 mm, depth 1280 mm, height 2060 mm...

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD – SPA – class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Hopper: 2 litres Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and – tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: hand sensor Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V – single-phase Doser / control box connection: direct   Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules   Manual electric screwdriver Machine dimensions: 95 x 75 x H 170 cm Hsdpfx Ajxflc Eoabofn Documentation available

Condition: used, Linear feeder / Vibratory feeder / Sorting device Vibratory linear feeder, vibratory hopper, dosing hopper, storage hopper Vibratory bowl feeder, bowl feeder Hodpexf Urvjfx Aabsfn Vibratory bowl, screw feeding system with vibratory feeder for screwdriving technology Feeding system, feed unit Manufacturer: RNA Rhein-Nadel Automation GmbH Year of manufacture: approx. 2000 Useful load: approx. 1.5 kg Oscillation frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W = 170 x 60 x 12 mm - Mounted track length 340 mm - Overall height with base plate and oscillating plate approx. 115 mm Required space L x W x H: 400 x 280 x 400 mm Weight: 9 kg Good condition

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, year of last overhaul: 2025, Complete production line for plastic windows (Rehau profiles) The plant remains operational and can be inspected while in use on site until December 2025. From December onwards, it will be available for dismantling. The automatic 4-head welding machine with corner cleaner can also be purchased separately – or together with the entire production line. The line is fully equipped and immediately ready for operation – ideal for the direct manufacture of plastic windows. All machines are in excellent condition. Cutting / Preparation: • SD25 Cross-cut saw • RU-VGPA3 • Macc metal saw • Wegoma V6/S water slot milling machine • Wegoma GL142P glazing bead saw • Wegoma AFK125 counter milling machine • Wegoma SK212 olive drill automation • Profile cutting trolleys (2 units) Welding & Processing: • Urban AK86250-35/25 – 4-head welding machine • SL2V double-head welding machine • Welding jaws incl. trolley • Urban SY530B corner cleaning machine with drilling unit • Wegoma SBA 1TS screw automation • Powerseat automatic screwdrivers (2 units) • KFM Urban copy router Extraction & Compressed Air: • Elektra Beckum SPA1000 extraction unit • Leoy Somer extraction unit • Kaeser SK 21 compressor • Schneider compressed air tank • Schneider air dryer Conveying Equipment & Storage: • Transport trolleys (7 units) • Cantilever racking (3 units) • Ruchser stop table • Gasket roll-off trolley • Side table at cleaning machine • Rack with rollers • Vertical stop table (2 units) • Horizontal stop table • Fittings rack with template • Heavy-duty rack (1 unit) Hfjdpsxg Al Tjfx Aabon Additional Equipment: • Manual squeegee tool • MD/230V swinging crane with suction lifter Software: • ProLogic software incl. 1 PC

Condition: excellent (used), Year of construction: 2009, Schirmer Cutting and Machining Center Type BAZ 1000-G2/VU Bar Machining Center Type SBZ - Cutting and Machining Center – Running direction from right to left - Automatic feed magazine for manual loading of 12 profiles, max. profile length 6500 mm, automatic transfer station into the gripper conveyor track - Insertion device for PVC profiles with NC-positioned gripper, driven by a highly dynamic linear servo motor. - Automatically adjustable profile guides for different support contours in the profiles - Machining station designed as a G-module, with 3 servo axes including clamping elements and integration into the control system. The station is equipped with high-frequency electric motors for the following processing on PVC profiles: o Drainage and ventilation slots - drilling in the frame, sash, mullions, transoms, and muntins o Lock case cutouts on window sashes, front door leaves, and side door leaves o Marking holes for mullions, transoms, and connectors that can be screwed from the inside o Profile cylinder and handle cutouts on the HAT sash o Door plate mounting holes o Sash bearing pivot holes 2x6mm / 3x2.5mm Hfodewkq Igepfx Aabon - Complete VU saw cut with double saw unit 2x45° for simultaneous sawing of the starting and cross-cut sections, as well as notch cuts for welded transoms. Saw feed with servo axis via linear servo motor and height adjustment with servo axis via ball screw. - Seal clamp above the VU saw - Conveyor belt for removing PVC waste from the VU saw machine area - Complete saw unit in standard design with 1 saw unit for cutting and cutting, continuously variable NC-controlled swivel drive, swivel range +45° to -45° for saw blade diameters of 550mm, saw motor with 2.5kW power - Horizontal circulation buffer for cycle-independent transport of profiles from the machining center to the steel insertion station, screwing station, and to the SBZ - Steel insertion station for the manual insertion of steel reinforcements with 12 insertion positions The 1st and 2nd steel insertion positions have clamps to hold the PVC profiles during manual reinforcement - Monitor as a steel length display for the steel insertion, including control unit 8 steel positions are displayed - Screwing station for the horizontal circulation buffer, operating from above and below, with frequency-controlled Electric screwdriving unit for screwing the steel reinforcement into the frame, sash, and mullion transom profiles. Designed for one 3.9x16mm self-drilling screw, it includes a feeder with NC-positioned gripper, driven by a highly dynamic linear servo motor. - Additional screwdriving station with automatic screw feed - Drilling station as a steel module, with two servo axes for drilling stroke and horizontal adjustment - Automatic label printer with dispensing device. The labels are manually applied to the profiles. - PC Machine Control / Control Cabinet PC C6140-0010 (TwinCat) Case 7-slot ATX industrial PC for control cabinet installation 3 PCI slots for expansion cards up to 270 mm long and 3 PCI slots for expansion cards up to 240 mm long Drives and expansion cards easily accessible Intel Pentium 4 processor, 2.4 GHz ATX motherboard for Pentium 4 6 PCI slots, 1 GB DDR RAM, expandable to 2 GB On-board data adapter, On-board Ethernet adapter 40 GB IDE hard drive 1.44 MB floppy disk drive

Condition: used, New: Yes Empty weight: 5 kg Part suitable for: trucks Type number: 1590100 Hfedpsxh Tbujfx Aabon KSTOOLS 159.0100 OEM : 1590100 Article nr.: KS1590100-veiling 39 PCS Screwdriver Kit

Condition: used, Dimensions (L,W) , mm Weight ca. 90 kg adjustable height (yes/no) ja stroke 300 - 800 mm surface of working table 1.700 x 1.500 mm table width max. 3.800 mm 0 ca. 130 kg Ruchser RU-4-SSP rotary-tilt table ----- Support surface 1700 x 1500 mm, maximum Table width swung out 3800 mm, pneumatically tiltable, weatherproof recess, with 6 storage boxes, each with 2 compartments, pull-outs below for widening, with 2 support feet and 2 flat clamping cylinders, Lifting device from 300 - 800 mm, Roller conveyor as a surface, foldable. Payload capacity 130kg. Driving device with 4 swivel castors Stop device (RU-4SSP) 2 stops for final inspection and To seal Wing assembly device with tool tray and adjustable stop for Hjdpovu Hfdofx Aabefn Inclination for RU-4-SSP Holder for drill, screwdriver gun etc. with screwdriver quiver Driving device with flanged rollers RU-DKFA and RU-4SSP 3 double meter rail for Driving device 25 x 10 mm ----- Price of the above machine on request! plus packaging and shipping ----- (technical data according to manufacturer - no guarantee!)

Condition: good (used), Universal screwdriver, construction screwdriver, screwdriver, electronic screwdriver, power screwdriver, electric screwdriver Hjdpfx Aasfc Hfvebsfn -Nominal power consumption: 600 watts -max. screw capacity: M8 -Speed: 600/1800 rpm -Connection: 220 volts -Number: 34 universal screwdrivers available -Price: per piece -Dimensions: 320/200/H80 mm -Weight: 3.3 kg/piece

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Hfodpjxf Up Ujfx Aabon Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: used, Year of construction: 2017, machine/vehicle number: D 941 479, overall weight: 16 kg, input frequency: 50 Hz, The Atlas Copco Power Focus PF4000-C-HW is the ideal solution for precise and efficient bolted joints in industry. We offer this used control unit together with the matching STV-ST61-30-40 bolted joint. Technical specifications: Control unit model: Power Focus PF4000-C-HW, year of manufacture: 2017 Hodpoulayxjfx Aabjfn Screwdriver model: STV-ST61-30-40, year of manufacture: 2017 Power supply: 200-240 V/ (50-60 Hz) Power consumption (W): 320 W Maximum operating temperature: +40.0° C Minimum operating temperature: +5.0° C Frequency: 50-60 Hz For further details, see the type plates on the control unit and screwdriver in the corresponding pictures.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Schirmer Cutting and Machining Center Type BAZ 1000-G2/VU including SZA450 Steel Cutting Machine Bar Machining Center Type SBZ - Cutting and Machining Center – Running direction from right to left - Automatic feed magazine for manual loading of 12 profiles, max. profile length 6500 mm, automatic transfer station into the gripper conveyor track - Insertion device for PVC profiles with NC-positioned gripper, driven by a highly dynamic linear servo motor. - Automatically adjustable profile guides for different support contours in the profiles - Machining station designed as a G-module, with 3 servo axes including clamping elements and integration into the control system. The station is equipped with high-frequency electric motors for the following processing on PVC profiles: o Drainage and ventilation slots - drilling in the frame, sash, mullions, transoms, and muntins Hfedpfx Aaowkq Rbjbjn o Lock case cutouts on window sashes, front door leaves, and side door leaves o Marking holes for mullions, transoms, and connectors that can be screwed from the inside o Profile cylinder and handle cutouts on the HAT sash o Door plate mounting holes o Sash bearing pivot holes 2x6mm / 3x2.5mm - Complete VU saw cut with double saw unit 2x45° for simultaneous sawing of the starting and cross-cut sections, as well as notch cuts for welded transoms. Saw feed with servo axis via linear servo motor and height adjustment with servo axis via ball screw. - Seal clamp above the VU saw - Conveyor belt for removing PVC waste from the VU saw machine area - Complete saw unit in standard design with 1 saw unit for cutting and cutting, continuously variable NC-controlled swivel drive, swivel range +45° to -45° for saw blade diameters of 550mm, saw motor with 2.5kW power - Horizontal circulation buffer for cycle-independent transport of profiles from the machining center to the steel insertion station, screwing station, and to the SBZ - Steel insertion station for the manual insertion of steel reinforcements with 12 insertion positions The 1st and 2nd steel insertion positions have clamps to hold the PVC profiles during manual reinforcement - Monitor as a steel length display for the steel insertion, including control unit 8 steel positions are displayed - Screwing station for the horizontal circulation buffer, operating from above and below, with frequency-controlled Electric screwdriving unit, - Additional screwdriving station with automatic screw feeder - Drilling station as a steel module, with 2 servo axes for drilling stroke and horizontal adjustment - Automatic label printer with dispensing device. The labels are manually applied to the profiles. - PC machine control / control cabinet PC C6140-0010 (TwinCat) housing Schirmer steel cutting machine type SZA 450 - Automatic feed magazine for up to 12 steel profiles, max. length 6000 mm - Saw unit for 90° cuts, saw blade diameter 450 mm - 3 kW saw motor, saw feed via servo drive with pneumatic control - Automatic bar feed and removal - Max. cutting length 4000 mm - Steel offcut management (steel length measurement in the steel loading magazine via 11 light barriers) - Display/monitoring system The operator is assisted in selecting the steel profiles to be loaded via the display. - Belt conveyor for cross-feeding and removal of the processed profiles

Condition: new, Manual hand unit Nein J/N Automatic for single pieces Ja J/N Automatic for frames Nein J/N Clip set "351" on the loose item ----- Manufacturer description: - Base frame in stable welded construction - Clip container as tipping conveyor with separation and feeding the clips - Screwdriver with tipping conveyor for the screws to be separated, feed screwdriver pneumatic with depth adjustment - Conveyor belt length approx. 4,000 mm as NC axis - Contact and clamping cylinder - Electro-pneumatic control via PLC It can programs with different Initial and distance dimensions can be entered - Workflow automatically in flow ----- Technical specifications: - Screw height 50-120 mm - Profile length 350-3,500 mm - Table height approx. 950 mm ----- Hedpfskx Stnox Aabjfn Total price of the machine ex works: on request! Freight costs within Germany: on request ! Installation, commissioning and instruction within Germany: on request ! ----- Video shows version with extra infeed belt and outfeed belt with pusher. Not included in the basic price. Can be offered as an option if required. (technical data according to the manufacturer without guarantee!)

Condition: used, Vibratory Bowl Feeder / Sorting Unit / Spiral Feeder / Vibratory Conveyor RNA Vibratory bowl, sorting device / screw feeding unit with vibratory feeder for screwdriving applications Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Bowl internal height: approx. 25 mm Hfjdeux Shvopfx Aabsn Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Oscillation frequency: 100 Hz / 6000 rpm Power supply: 230 V, 50 Hz - RNA control unit, type ESG 90, for adjustable vibration speed - The feeder was used for feeding automotive blade fuses Space requirement Ø x H: 420 x 390 mm Weight: 52 kg In good condition A bowl feeder always consists of two main components. 1) Sorting bowl, which aligns the parts 2) Drive unit, which generates vibrations in the bowl via mechanical oscillation and thereby moves the parts.

Condition: new, Assembly line consisting of: Item 1.0 / RU-CBM 4000 work table with running rail extended by 500mm for additional assembly an aluminum holder screwing machine for RU-CSA-SMB or RU-CSA-SMZD with RU-SH special screwdriver, support table Length 4000 mm, width 1400 mm, inclination of the working platform manually adjustable. Holder for fitting scissors or fitting punch. 16 pieces of swiveling counter-holders for hanging the wings, completely pneumatic Foldable for unhindered movement of the wings on the table surface. Device for scanning the sash fitting length for constant and variable/central gear seat for already drilled wings, colored Dimension recognition of the fittings. RU-SH, special screwdriver with pneumatic depth switch on carriage mounted, safety control, pneumatic height adjustment, Screw feeder with automatic shutdown of the filling container (Manual insertion for a second screw length on the special screwdriver upon request). RA-8, turret stop for 8 screw levels mounted on the carriage. RA-4, turret stop for 4 different wing widths Swivel table mounted. Pneumatic wing measurement sensing. operated, scanning range up to 2500mm simultaneous clamping of the scanning. PSF - Pneumatic tensioning device for sashes. Working height adjustable from 900 - 1000 mm. Support table covered with felt. Running rail extended to the left by 800 mm. Item 1.1 / 5035-1 Pneumatic swivel device of the work surface with foot valve Item 1.2 / 0500000 Holder matched to customer punch/scissors. For mounting a hardware punch provided by the customer or Fitting shears (third-party manufacturer) on the sash assembly table. Hsdpfx Aaod Ih Huebefn Please specify make when ordering!!! Item 1.3 / 5597-7 Driving device for RU-CBM on semicircular rails. The castors are on the left and right of the base frame of the table mounted. Item 1.4 / 6354-6 3 double meters of semicircular rails 30 x 10 mm. Item 1.5 / 0730000 RU-SBL3000/40 free-standing fitting bearing, Length 3100 mm, depth 1250 mm, height 2200 mm, Stand frame on the front without supports, 40 compartments, divided into 10 compartments in a row by dividers and a continuous shelf at the top, Compartment size: width 280 mm, height 150 mm. Item 2 RU-CSA-SMB aluminum holder screwing machine with automatic Screw feeding and manual feeding of the aluminum holders from one traveling box with pneumatic positioning device, Screwdriver with depth cut-off with 4-fold turret stop. Pneumatic adjustment device in the y direction against 2 pieces 6-fold Revolver attacks. Feed container for manual feeding of rotary holders or clip holder in square shape 18.5 x 18.5. The holder is manually pushed into a channel in the box and with positioned in front of the screwdriver mouthpiece using a pneumatically operated slide. Profile depth max. 150 mm, screw spacing in the y direction max. 120 mm. Item 3 RU-S48-A6-350 column slewing crane for chain hoist, with 6 m aluminum boom Version with column, smooth-running boom and sliding chassis for swivel and trolley travel manually by pulling and pushing the load. Projection 6 m Construction height 4,461 m Lower edge of boom 3.722 m (top edge of boom 3.9 m) Swivel range max. 270° Painting of the steel construction in RAL 7035 The base plate is attached to the on-site hall floor At least 250 mm thick. Designed, of course, according to the valid STANDARD EN 13155 Warra...