Used Holzher 1255 for sale (174)

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Bsdpfevvkfdsx Abtsdg

Condition: used, Year of construction: 2002, Machining dimensions (tool diameter 25mm): X=3015 mm Y=1483 mm Z=325 mm Max. travels: X=3268 mm Y=1483 mm Z=325 mm Max. programming speed: X/Y = 75 m/min / Z = 30m/min Tool holder HSK 63F Drilling unit 7964, 14 vertical drilling spindles with 32 mm grid (10 in x / 4 in y) Sawing unit 7946 3.6 kW, 90° pneumatically pivotable Milling unit 7933 9 kW Wood Her Vector axis (C-axis) Tool magazine (6 disk places) Hand control unit Laser device (positioning of the suction cups) PC control panel with 17" monitor Operating system Windows 2000 Software: TwinCAM32 - office version Vacuum pump 100 m³/h Dry running Selective safety mats (3-field division) Bodpfxsvvi Nbj Abtjdg Storage location: Nattheim

Condition: used, Storage location: Nattheim Bdsdpfx Aovvkrdobtsg

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Storage location: Nattheim Bedevvi Spjpfx Abtsdg

Condition: used, Year of construction: 2003, Used Machine Year of Manufacture: 2003 Features and Technical Specifications: - Control system with LCD display - Swiveling control panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support - Joining milling unit 1961: - 2 x 2.0 kW - Diamond jointing cutters in synchronous and counter-rotating operation, Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of roll and strip stock Adhesive application system 1906: - Cartridge system with sensing nozzle - With automatic reloading - PUR adhesives can be used Press Unit 1816: - With driven roller - Pneumatic control of the press unit Trimming Unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling Unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle on the milling unit Corner Copying Unit 1832: Bedpfxszk Nwwo Abtjdg - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius Skiving Unit 1929 MOT 2: - Plastic edges up to 3 mm - Chip collection box for radius skiving blade Surface Skiving Blade 1964: - Insert-controlled surface pulling blade - Air nozzle on the surface pulling blade Buffing unit 1940: - Edge thickness for roll material: 3 mm - Edge thickness for strip material: 5 mm - Max. edge thickness for corner copying: 3 mm - Workpiece thickness: 6–45 mm - Workpiece thickness for corner copying: 45 mm - Min. workpiece length: 180 mm - Feed speed: 8 m/min - Workpiece support spacing: 470 mm - Support plate diameter for edge material: 800 mm - Trimming blade for roll material up to: 3 mm - Warm-up time: 3.5 min - Power of jointing milling unit: 2 x 2 kW - Power of trimming saw: 2 x 0.22 kW - Power of the milling station: 2 x 0.6 kW - Power of the corner copying unit: 0.22 kW - Exhaust port for the jointing milling unit: 120 mm - Exhaust port for the milling unit: 70 mm - Exhaust port for planer unit: 70 mm - Dimensions: 5,350 x 1,669 x 1,940 mm - Weight: 1,200 kg

Condition: used, Year of construction: 2016, operating hours: 12,415 h, total height: 2,200 mm, total length: 9,050 mm, total width: 1,200 mm, Colour: White Weight: 4.800 kg - Year: 2016 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 109/1-606 - Operating hours: 12415 - Number of units [pcs]: 11 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Type/Brand: 1914 - - Tools available: Yes - └ 4th unit type: Cap unit - - Type/Brand: KA701 - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Type/Brand: 1828 - - Tools available: Yes - └ 6th unit type: Fine milling unit - - Type/Brand: FR701 - - Tools available: Yes - └ 7th unit type: Corner rounding unit - - Type/Brand: FF701 - - Tools available: Yes - └ 8th unit type: Radius scraping unit - - Type/Brand: ZK501 - - Tools available: Yes - └ 9th unit type: Flat scraping unit - - Type/Brand: 1856 - - Tools available: Yes - └ 10th unit type: Brushing unit - - Type/Brand: ES701 - - Tools available: Yes - Min. edge band thickness [mm]: 3 - Max. edge band thickness [mm]: 20 - Min. panel thickness [mm]: 8 - Max. panel thickness [mm]: 60 - Max. panel width [mm]: 65 - Min. panel length [mm]: 180 - Max. panel length [mm]: 250 - Min. feed speed [m/min]: 10 - Max. feed speed [m/min]: 25 - Feed speed control: Continuously adjustable - Glue system: Glue pot - Options: Return transport - Voltage [V]: 400 - Current consumption [A]: 45 - Transport dimensions: 9050mm x 1200mm x 2200mm (l x w x h) - Transport weight [kg]: 4800kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Bsdpjzhrlfjfx Abtsdg Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2010, total height: 2,580 mm, total length: 5,500 mm, total width: 1,500 mm, Weight: 1.500 kg - Year: 2010 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 161/1-10 - Number of units [pcs]: 7 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes Bdsdpfx Ajyu Tkkebtog - └ 7th unit type: Flat scraping unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 38.85 - Fuse [A]: 50 - Transport dimensions: 5500mm x 1500mm x 2580mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2006, operating hours: 5,049 h, total height: 2,550 mm, total length: 5,900 mm, total width: 1,350 mm, Colour: White Weight: 3.000 kg - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 4547 - Operating hours: 5049 - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit Bdjdpfezrd Igjx Abtjg - - Tools available: Yes - └ 7th unit type: Radius scraping unit - - Tools available: Yes - └ 8th unit type: Brushing unit - - Tools available: Yes - Min. panel thickness [mm]: 6 - Max. panel thickness [mm]: 45 - Min. panel width [mm]: 60 - Min. panel length [mm]: 180 - Feed speed control: Continuously adjustable - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 53.31 - Fuse [A]: 63 - Transport dimensions: 5900mm x 1350mm x 2550mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2011, total height: 1,730 mm, total length: 6,100 mm, total width: 1,440 mm, Colour: Grey Weight: 2.500 kg - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 5/1-107 - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers Bdedpsyf Dakefx Abtsg - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Radius scraping unit - - Tools available: Yes - └ 8th unit type: - - Tools available: Yes - └ 9th unit type: Flat scraping unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 21.9 - Fuse [A]: 50 - Transport dimensions: 6100mm x 1440mm x 1730mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2009, total height: 1,700 mm, total length: 6,100 mm, total width: 1,450 mm, Colour: Cream Weight: 2.500 kg - Machine available from: 2026-01-19 - Year: 2009 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 26 - Number of units [pcs]: 7 - └ 1st unit type: - - Tools available: Yes - └ 3rd unit type: - - Tools available: Yes - └ 4th unit type: - - Tools available: Yes - └ 5th unit type: - - Tools available: Yes - └ 6th unit type: Bdodpfx Absx Aq Dpetsg - - Tools available: Yes - └ 7th unit type: - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 39.5 - Fuse [A]: 50 - Transport dimensions: 6100mm x 1450mm x 1700mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Numerically adjustable infeed fence Bsdpjzx Sxgefx Abtsdg Air flotation infeed table Anti-adhesive liquid spray system Pre-milling unit with diamond cutters Edge feeder for edge banding from coil or strips Glue station for GlueJet cartridges or L-Tronic laser technology 4 pressure rollers with pneumatic pressure adjustment Edge lubricant spray system Dual-motor precision end trimming unit with pneumatic angle adjustment Top and bottom edge surplus trimming unit (straight trimming) Numerically adjustable profile edge milling unit Flat scraper Profile scraper – two profiles Cleaning liquid spray system Pneumatically activated buffing units Pneumatically activated edge buffing unit Feed speed continuously adjustable from 10 to 25 m/min Automatic lubrication of the feed chain Frame support Minimum workpiece length: 140 mm Workpiece thickness: 8–60 mm Minimum workpiece width: 60 mm Year of manufacture: 2016

Condition: used, Year of construction: 2010, Technical details: • Edge material thickness for strip material: 0.4–6 mm • Edge material thickness for coil material (depending on material): 0.4–3 mm • Edge material height: max. 65 mm • Workpiece thickness: 6–60 mm • Minimum workpiece width: 65 mm • Minimum workpiece length: 160 mm • Feed speed: 10 m/min • Integrated control panel on the front side, in the infeed area • Control system: PPC 221 – Power PC • Pull-out workpiece support table, extension: 600 mm • 1801 Pre-milling unit with diamond milling cutter (1 × 0.8 kW, 1 × 1.2 kW, 200 Hz, 12,000 rpm) • 1903 Edge band magazine, pre-cutting up to 3 mm • 1906 MG combined glue application unit (cartridge and granulate) • Pressure regulator for cartridge glue application with pneumatic control • 1912-3 Pressure roller unit • 1918 Pneumatic end-trimming unit • 1827 Multifunctional milling unit (pneumatic control) • 1832 Corner rounding/milling unit Bdedpszxww Uefx Abteg • 1929 Scraper unit, R = 2 mm • 1964 Flat scraper Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, Year of construction: 2001, total height: 1,750 mm, total length: 5,650 mm, total width: 1,100 mm, Weight: 1.950 kg - Year: 2001 - Documentation available: No - CE certificate present: No - Serial number: 468/0-103 - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Flat scraping unit Bsdjxlqpdepfx Abtsdg - - Tools available: Yes - └ 8th unit type: Brushing unit - - Tools available: Yes - Min. edge band thickness [mm]: 0.4 - Max. edge band thickness [mm]: 8 - Min. panel thickness [mm]: 6 - Max. panel thickness [mm]: 50 - Min. panel width [mm]: 65 - Min. panel length [mm]: 180 - Max. feed speed [m/min]: 11 - Voltage [V]: 400 - Transport dimensions: 5650mm x 1100mm x 1750mm (l x w x h) - Transport weight [kg]: 1950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Base machine 555 - Machining dimensions for contour milling: - X = 3514 mm - Y = 1544 mm - Maximum machining dimensions: - X = 3868 mm - Y = 1746 mm - Z = 325 mm - Workpiece support with 8 brackets, pneumatically clamped - Drilling unit 7968: - 18 vertical drilling spindles with 32 mm pitch - 12 in the X-axis and 6 in the Y-axis - available individually - T-shaped layout - max. drilling diameter 35 mm (depending on panel thickness) - Spindle extension stroke: 70 mm - Direction of rotation: alternating clockwise and anti-clockwise Bedjzk N Hljpfx Abtsdg - n = 4725 rpm, infinitely variable - 2 horizontal drilling units in the X-direction, 1 horizontal drilling unit in the Y-direction - Sawing unit 7946: - Motor: 3.5 kW - 90° pneumatically swivelling - n = 5300 rpm - Tool holder A Ø = 200 mm, I Ø = 30 mm, B = max. 3.5 mm - Sawing/grooving in the X and Y directions - Milling unit 7935: - with 6 kW spindle, water-cooled - Milling unit 7982: - for lock case milling - Tool changer 7996: - 18-position magazine (turret) - Vacuum pump with a capacity of 140 m³/h - Handheld control unit - PC control system with TwinCAM WOP system - Siemens control system Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2013, Used Machine Year of Manufacture: 2013 Features and Technical Specifications: Bedpfxszk N Dko Abtodg - Control system with 15-inch touchscreen - Pre-milling unit with 2 milling heads - Edge feeding unit - GluJet 301 glue application system: 2.3 kW, automatic glue height adjustment, sensing nozzle - Press unit: pneumatic - Crosscut unit: pneumatic - Diamond cutters (left and right): with CM technology - Corner copying unit with diamond cutters - Surface scraper - Sanding unit - Extendable workpiece support - Motorized pressure bridge adjustment with NC axis via program control - Exhaust hoods for trimming unit - Multifunction milling unit: MOT 4 - Vertical feeler rollers: pneumatic - Pneumatic swivel mechanism for MOT 4 milling unit - MOT 2 planing unit with chip collection box - Spray system for the infeed and outfeed areas - Minimum workpiece length: 160 mm - Workpiece thickness: 6–60 mm - Edge thickness: 0.4–6 mm - Feed speed: 10 m/min - Overall length: 4930 mm - Weight: 1420 kg

Condition: used, Year of construction: 2007, Second-hand machine Year of manufacture: 2007 Features and technical specifications: Nesting system with grid table Bsdpfx Aozk Nvgobtjdg Machining dimensions: - X: 5000 mm - Y: 1240 mm - Z: 135 mm Travel ranges: - X: 5665 mm - Y: 1650 mm - Z: 325 mm with milling unit 7933: - Motor 11 kW (S6) - HSK 63 - water-cooled with C-axis with 18-position disc-type tool changer with 250 m³ vacuum pump with manual control unit with central lubrication with minimum quantity lubrication system Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: Travel ranges: - X-axis: 2,685 mm – Y-axis: 1,095 mm – Z-axis: 140 mm Milling unit: - 6 kW, water-cooled - Tool holder HSK 63 F – Speed 1,000 – 18,000 rpm Tool changer: 6-position, side-mounted Drilling head: - 9 vertical drilling spindles in 32 mm increments - Horizontal drilling spindle: 1+1 - Vertical drilling spindle: 1+1 Groove saw in the X-direction Control system: Twin CAM 32 Vacuum pump 100 m³/h Including vacuum suction cups Dimensions: 5,200 x 2,843 x 1,855 mm Weight: approx. 3,500 kg Availability: by arrangement Bsdpfszk Nu Nex Abtodg Storage location: Röllbach

Condition: used, Year of construction: 2004, Second-hand machine Year of manufacture: 2004 Condition: Tested and in working order Features and technical specifications: Travel ranges: - X-axis: 2,685 mm – Y-axis: 1,095 mm – Z-axis: 140 mm Milling unit: - 6 kW, water-cooled - Tool holder HSK 63 F – Speed 1,000 – 18,000 rpm - Tool changer: 6-position, side-mounted Drilling head: Bsdpfxezk Nmfj Abtodg - 9 vertical drilling spindles in 32 mm increments - Horizontal drilling spindle: 1+1 - Vertical drilling spindle: 1+1 Groove saw: in the X-direction Control system: Twin CAm 32 Vacuum pump: 100 m³/h Including vacuum suction cups Dimensions 5,200 x 2,843 x 1,855 mm Weight: approx. 3,500 kg Availability: by arrangement Storage location: Röllbach

Condition: used, Year of construction: 2019, Holz-Her Dynestic 7532 10.5 automatic CNC nesting machining center with Holz-Her Store-Master 5110 panel storage system Used machine Year of manufacture: 2019 Features and Technical Specifications: - Designed for classic nesting machining with a wear plate - Welded machine frame with ground and hardened prismatic guides for the traveling column, toolhead, and consoles - Gantry-style moving column - Rack-and-pinion drive, helical teeth, in the X and Y directions; ball screws in the Z direction for precise positioning - Machining dimensions: - Max. support area on nesting table: X = 3100 mm Y = 1560 mm Bdedpfszlbrpex Abtjg - Max. travel ranges: X = 4695 mm Y = 2100 mm Z = 293 mm - Max. clearance height of DYNESTIC table Z = 100 mm from top edge of table (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Rigid, continuous machining table with grid markings - continuous slots in the X and Y directions - Slot spacing: 50 mm - Includes 25 meters of sealing cord for securing the wear plate - Vacuum fields: 1-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - individually controllable - U-shaped arrangement - 5 in the X direction and 4 in the Y direction - 32 mm pitch - max. drill bit diameter: 35 mm - Total drill length: 70 mm from the mounting end (depending on panel thickness) - Spindle extension stroke: 70 mm - Rotation direction: Alternating clockwise and counterclockwise - n(max): 1000–4400 rpm, continuously adjustable - Mounting: M10 thread – 11 mm interference fit - Tool-free, without mounting adapter - 6 horizontal spindles: - 2 double drilling spindles in the X direction - 1 double drilling spindle in the Y direction - Mounting: M 10 thread, 11 mm interference fit - Total drill length: max. 63 mm from mounting end - Tool-free, without chuck - Milling unit 7842: - Power: 12.0 kW (S6) - n(max) = 1,000–24,000 rpm, continuously variable - Max. power at 12,000 rpm to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck with HSK shank - Ceramic ball bearings (hybrid bearings) - Max. tool weight: 6 kg (including holder) - Tools: Milling and grinding tools, max. Ø 160 mm - Safety guarding in accordance with CE standards - Protective fencing on the sides and rear - Vacuum pump: 500 m³/h, dry-running - Operator safety via light curtains in the front area of the machine - Handheld control unit for remote control of the machine with the following operating functions: - Start/Stop of the machining program - Speed control of the machining cycles - Reset button - Manual feed/rapid traverse for all axes - Emergency Stop - CAMPUS V7 CAD/CAM software, 1 machine license consisting of: - CAMPUS NC-HOPS: - Graphical variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic centralized lubrication - Automatic lubrication according to defined lubrication intervals - Additional dust sealing via positive pressure in each guide carriage - Simultaneous lubrication: - for all linear guides in the X, Y, and Z directions - for all ball screws in the Y and Z di...

Condition: good (used), Year of construction: 2002, 0,4-3 mm Bodpfx Aszmy N Nsbtedg Workingpiece thickness from to 6-45 mm Total length 3700 mm Feed speed 8 m/min. Weight 900 kg

Condition: good (used), Year of construction: 1999, 0,4-5 mm Workingpiece thickness from to 6-45 mm Bjdezafppopfx Abtodg Total length 4130 mm Feed speed 11 m/min. Weight 1250 kg

Condition: used, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, Holz-Her Edgebanding Machine SPRINT 1329 Multi with motorized pressure beam PUR & EVA adhesive (up to 60mm) with the NEW GLU JET GJ725 PUR PRO including vacuum pump motorized infeed guide rail Bdjdpfx Ajzx Ennsbtsg guide for narrow parts edge trimming IntelliSet - tool correction fa.s.t. - setup in the gap + remaining length display of the edge band roll iTronic - pressure & adhesive quantity control automatic chain lubrication second workpiece discharge + air cushion table in the infeed area fully motorized equipment for all units multifunction milling - radius 1.3mm (2x) & 2mm (2x) + nesting package, vertical, bottom spraying devices + padding unit with texture finish for normal applications and structured surfaces and more The machine is currently being refurbished at the factory in Voitsberg / Austria. Completion: approximately October / November 2026 Delivery, installation and training for the machine can be arranged directly through us for an additional fee. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our terms and conditions can be found on our website at holzher.de/de/agb.

Condition: used, Year of construction: 1999, Holz-Her SPRINT 1411 edgebander Bdsdpfx Aew Ebrxebteg Description Workpiece thickness min./max. 6/45mm Automatic edge feeder (coil up to 5mm) Workpiece min. 60mm Workpiece length min. 180mm Cartridge glue system (short heat up time 2-3 min.) End trimming unit Flush trimming unit Scraping unit (flat) Buffing (brushing) unit CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf).

Condition: used, Year of construction: 2014, Working dimensions: X = 3425 mm, Y = 1287 mm, Z = 325 mm. Max. workpiece height: 180 mm. Max. clearance under the hood: Y = 1450 mm / Bumper version = 1370 mm. Includes CabinetControl Base, 1 machine license, and 1 office license. Milling head 7830, 1-stage, power 6.5 kW, air-cooled, n(max.) 1000 - 18000 min-1, infinitely adjustable. Max. power at 12000 min-1 to 18000 min-1 with HSK-F 63 tool holder, with collet chuck with HSK shank. Drilling unit 7884, 14 spindles, 10 vertical spindles individually accessible, arranged in an L-shape, 6 in the X direction and 4 in the Y direction. Drive power 3 kW, 32 mm pitch. Sawing unit: Integrated sawing unit for sawing/grooving in the X direction, n(max.) 1000 - 5650 min-1, infinitely adjustable. Tool holder: A = max. DM = 125 mm. Bodey Tpz Repfx Abtsdg Location: Supplier.

Condition: used, Year of construction: 2001, Workpiece thickness min./max.: 6/45 mm Edge banding thickness: 0.4 - 3 mm Edge banding height max.: 51 mm Edge banding strip length min.: 350 mm Edge banding overhang in height per side max.: 3 mm Workpiece width min.: 60 mm Workpiece length min.: 180 mm Bedpfxoy Dd Iys Abtedg Overall length: 3700 mm Width: 1440 mm Height max.: 1970 mm Workpiece infeed height: 850 mm Weight: approx. 850 kg Storage location: Nattheim