Used Holzher Beam Saw for sale (174)

Condition: excellent (used), Year of construction: 2022, • Cutting height 2200 mm x cutting length 4300 mm • Extraction to CE TRK Regulations CH 2200 (less than 2 mg of fine dust/m³ air) • Middle workpiece support - 4 zones • Sliding carriage 1255 for cutting height 2200 mm • Saw unit 4,0 kW, 5400 min-1, 400 V, 50 Hz incl. HW-saw blade Ø 250 x 30 x 3,2 mm, Z 48, Hohl-Dachzahn • Length stop (manual) with digital read out for vertical cuts. For middle workpiece support • Digital display for horizontal cuts at the control panel incl. electrical fine adjustment • 3 adjustable stop points in the saw beam for repeating horizontal cuts via stop point • Strip stop for repeating horizontal cuts, Scale in mm, max. strip height 650 mm • Narrow part device (2 pcs) Avoids tilting of workpieces • Super Cut scoring device: For scoring the surface of covered materials. • Cutting optimization Opti-Base V-Cut 1 pc 10ˇTouch-screen Gsdpfx Apsy Nmtcswobr 1 pc Software machine 1 pc Software office- 1 place floating network license (Opti V-Base) 1 pc label printer • Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, Year of construction: 1984, used Make Holz-Her Type 1215 Year of manufacture 1984 Motor 4.0 kW Gedpfxovwgi Io Apwobr Cutting length approx. 5300 mm Cutting height approx. 2200 mm Center support Saw blade diameter approx. 300 mm, cutting depth 80 mm Free-standing Slatted frame moves away Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee or warranty

Condition: ready for operation (used), Year of construction: 1994, Holzher 1245 Superslide electromotoric height adjustment with digital display electromotoric tilt adjustment with digital display Cutting length with sliding table mm 3200 Crosscut length with sliding table mm 3200 Cutting width mm 1250 Table size mm 1100 x 800 Max saw blade diameter mm 450 Saw blade bore mm 30 Saw tilting range 0-45° Maximum cutting height at 450 mm Ø mm 150 Cutting height at 45° at 450 mm Ø mm 106 Motor power kW 7.5 Saw motor speeds rpm 3/4/5000 Extraction port Ø mm 80/120 Machine weight approx. kg 930 Connection value V/Hz 380/50 Year of manufacture 1994 Price 5200.- Gedpfjy Sgxdox Apwebr

Year of construction: 2010, condition: excellent (used), I sell the automatic vertical saw without scoring knives HOLZ-HER Supercut. Cutting range 5300x2200mm Gedjpl Svcepfx Apwebr Motor 3,0kW. Cutting head tilting 0-90° Main saw blade 240-250mm / 2850rpm. Condition very good. Available immediately.

Condition: excellent (used), functionality: fully functional, saw drive: 3,000 W, Holz-her 1220 automatic vertical panel saw. Multiple settings, half or whole board cutting. You can try it, it works well. Godjx Eyqyspfx Apwsbr

Condition: used, Year of construction: 2010, machine/vehicle number: 48/1-006 15500889, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, cutting height (max.): 85 mm, cutting width (max.): 4,400 mm, saw blade diameter: 350 mm, overall weight: 5,000 kg, Equipment: scorer, - Holz Her CUT 6120 - heavy-duty precision high-performance panel saw - year of manufacture: 2010 - cutting length: 4400 mm Gedpfxoy D Hb Ne Apwebr - saw blade projection: 82 mm - control system: CUTCONTROL 2 - label printer - air cushion tables - main saw unit: 11 kW, saw blade diameter 350 mm - scoring unit: 2.2 kW - saw carriage feed: 0 - 100 m/min, stepless - machine dimensions approx. 9730 x 6450 x 1650 mm - machine has been professionally dismantled and securely stored - trouble-free loading with forklift (included in the price) - location: Líšťany 33035, Czech Republic (approx. 50 km from the German border / Waidhaus)

Condition: used, functionality: unexamined, machine/vehicle number: 1205, input voltage: 380 V, Used Holz-Her 1205 Vertical Panel Saw – Wall Saw – Panel Saw with Saw Blade Manufacturer: HolzHer Model: 1205 Cutting range: 445 cm width, 175 cm height Gbedpfjxiwvlex Apwor Voltage: 380 volts.

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 226/0-206, Max. cutting length 4,300 mm, Max. cutting height (vertical) 2,100 mm, Max. cutting height (horizontal) 2,010 mm, Godowgm Ihspfx Apwobr Max. cutting depth 60 mm Motor 4 kW Max. circular saw blade diameter = 250 mm, Extraction nozzle diameter = 120 + 100 mm Max. installation dimensions 5,080 x 2,780 x 1,600 mm, Support rails have been replaced! --- Excluding transport and assembly of the machine --- Ex works in Seevetal, as seen, Subject to prior sale

Condition: used, Year of construction: 1981, used, good conditionMake Holz-HerType 1215Year of manufacture 1981MachineNo. 710motor 4.0 kWcutting length approx. 5300 mmcutting height approx. 2100 mmcutting depth 80 mmsaw blade diameter approx. 300 x 30 mmfree-standingslatted frame moving awayspace requirement approx. 6550 mm x 1265 mm x 2895 mmweight approx. 1000 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in as-is condition as inspectedwithout guarantee and warranty Gbsdpfx Aovwfmxepwor

Condition: used, Year of construction: 1983, usedMake Holz-HerType 1215Year of construction 1983MachineNo. 1222cutting depth 80 mmmotor 4 kWcutting length approx. 5300 mmcutting height approx. 2000 mmsaw blade diameter approx. 300 mmfree-standingslatted frame moving awaysuction connection D approx. 100 mmspace requirement approx. 6300 mm x 1100 mm x 2700 mmWeight approx. 1000 kgTotal connected load approx. 3 kWStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in as-is condition as inspectedwithout guarantee and warranty Gbodpfjvwfnpox Apwjr

Condition: excellent (used), Year of construction: 1993, Technical specifications: Manufacturer: Striebig Year of manufacture: 9/1993 Type: Standard II Plus 5220A Feed: manual Gbjdpfx Apjiwlz Aowsr Design: automatically adjusting aluminum slat bed Saw carriage locking: manual Lowering of saw unit: manual Swivel adjustment 0 to 90°: manual Motor power: 4.4 kW Cutting range: 4600 × 2200 × 60 mm Speed: 5250 rpm Saw blade diameter: 300 mm Space required: L × H × W 5700 × 3000 × 1400 Condition: very good Location: warehouse Saw blade: 1 piece Can be loaded onto a truck using a forklift on site. Delivery and assembly possible by arrangement.

Condition: used, Year of construction: 2019, Edge Control Numerical Control Panel height min - max mm 6 - 60 Pvc/Abs up to mm 3 Minimum panel length \ width mm 140 \ 60 Feed speed up to mt/min 10 / 25 continuously Working height electronically adjustable by C.N Lateral roller conveyor with idle wheels for panel support Rectifier unit with 2 motors Coil holder plate Gluing unit for EVA \ PUR glue with cartridge or granular system Edge pressure group on straight profiles with pressure rollers electronically adjustable by N.C Trimming unit with 2 motors Gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 multifunction motors (edger + rounder) with regulation by numerical control in automatic Edge scraping unit with electronic regulation from N.C. Glue scraper group Brush group Machine length mm 6500 approx Weight Kg 2750 approx Godpfx Aswwhn Depwjbr

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 4547, functionality: fully functional, operating hours: 5,049 h, total height: 2,550 mm, total length: 5,900 mm, total width: 1,350 mm, overall weight: 3,000 kg, plate height: 45 mm, TECHNICAL DETAILS The machine consists of 8 processing units as follows: 1. Unit: Pre-milling unit – tools available 2. Unit: Gluing unit 3. Unit: Pressure rollers – tools available 4. Unit: End trimming unit – tools available 5. Unit: Rough milling unit – tools available 6. Unit: Edge rounding unit – tools available 7. Unit: Radius profiling unit – tools available 8. Unit: Brushing unit – tools available Panel thickness min.: 6 mm Panel thickness max.: 45 mm Panel width min.: 60 mm Godpfx Ajzrmtfjpwobr Panel length min.: 180 mm Feed rate control: Continuously variable Gluing system: Glue pot Voltage: 400 V Power consumption: 53.31 A Fuse: 63 A Dimensions & Weight Dimensions (L x W x H): 5,900 x 1,350 x 2,550 mm Shipping weight: 3,000 kg Note: The top and bottom stripping blades are currently not functional.

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 974/1-810, functionality: fully functional, operating hours: 1,483 h, workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, controller model: Edge Control 19 mit 18,5" Touchscreen, The machine was last serviced in February 2026 and will continue to operate until August 5, 2026. The machine has the following configuration: Edge milling unit 1802 Motor power: 2 x 2.0 kW 1st milling cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation for edge milling unit 2nd milling cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation for edge milling unit Edge feeder 1901 SYNCHRO (fully automatic) Glue application station Glu Jet GJ301 (automatic) Power: 2.3 kW, 50 Hz Cartridges: Reservoir for 14 cartridges (1.4 kg) GluJet collection container Printing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic Multi-function milling unit 1826 MOT4 Motor power: 2 x 0.65 kW Air Stream System milling cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, left-hand rotation Air Stream System milling cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, right-hand rotation Profile milling unit 1833 MOT4 1st milling cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, left-hand rotation with CM technology 2nd milling cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, right-hand rotation with CM technology Gbodpezrf Nrofx Apwer Scraping blade unit 1929 MOT4 Tungsten carbide reversible inserts for scraping blade holder R = 2 mm (2 pieces required) Surface scraping blade FK 701 Smoothing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Spray device 1856 TECHNICAL DETAILS Feed speed: 10 - 18 m/min Workpiece length min: 160 mm Workpiece width min: 60 mm Workpiece thickness: 8 - 60 mm Edge height max.: 65 mm Edge thickness roll material: 0.4 - 3 mm Edge thickness strip material max.: 8 mm MACHINE DETAILS Control: Edge Control 19 with 18.5" touchscreen Infeed guide rail length: 1,350 mm Electrical system for stepless feed: 400 V / 50 Hz Feed electric motor: 2.2 kW Operating hours: 1,483 h EQUIPMENT Motorized pressure bridge adjustment Nesting - tactile probe vertical, top & bottom Edition 18 package ECO MODE energy-saving mode ITronic system

Condition: used, Year of construction: 2018, Used machine Used edge banding machine from Holz-Her, model Sprint 1329 Performance, with Return system from Barbaric, type RTS 01 Edge banding machine: Year of manufacture: 2018 Motorized roller bridge 1329 PERFORMANCE iTronic - Adaptive pressure and glue quantity control, automatic fine adjustment depending on the program Infeed fence, standard B20 mm Infeed fence for precise feeding of the workpiece Edge Control 19 control system with 18.5" touchscreen color display 16:9 Jointing cutter unit 1802 (2 x 2.0 kW, 200 Hz, 12000 min-1) with 2 cutter units for jointing the edge of the panel (1x forward rotation, 1 x reverse rotation) Edge feeder 1901 SYNCHRO, automatic transport of coil and strip material Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) Pressure unit 1913, motorized, 1 roller driven, 2 follower rollers Spray device (release agent) after the pressure unit with 2 spray nozzles for coverage up to 60mm working height Trimming unit 1918 (60 mm), pneumatic (2 x 0.45 kW, 12000 min-1), pneumatically swiveling 0/10° Cutter unit FR701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Shaping cutter unit FF701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Scraping unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the feeler rollers Surface scraping blade FK701 with pre- and post-sensing for removing glue residue Motorized adjustment of the infeed fence for precise feeding of the workpiece to the jointing cutter unit Automatic chain lubrication / intelligent automatic transport chain lubrication GLU JET collection container Spray device 1856 for the infeed and outfeed area: Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 min-1) For final polishing and edge polishing. With 2 textile discs, swivel range 0 - 5° RETURN system connection (emergency stop interlocking) Connection of a workpiece return system to the control system from HOLZ-HER Gbsdpfx Aezt Twtopwjr Machine dimensions approx. 5600 x 1010 x 1900 mm Machine weight approx. 2100 kg Return system: Year of manufacture: 2018 Machine number: 2180122-206 Further details can be found in the PDF Availability: by arrangement Location: Röllbach

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Gbjdev Sv Enopfx Apwjr Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical data: BASE MACHINE DYNESTIC 7507 10.7_Push Processing length: 3,100 mm (without tools) Processing dimension in Y-direction: 2,200 mm CAMPUS V7 CAD/CAM Software, 1 x license incl. CabinetControl Base and material removal simulation Upgrade "CAMPUS "Better Nest" freeform nesting software" Uninterruptible power supply (UPS) Milling unit 7830, power: 10.3 kW (S6/40) Sensor package Chipcontrol for 3-axis spindle incl. receiver 7884 Drilling unit, complete, 14 spindles, drive power 3 kW Integrated saw unit for cutting/grooving in X-direction, n(max.) 1,000–7,330 rpm, infinitely variable 1 rear stop rail for the machining field (Field D) at the rear with 1 lateral stop (replaces lateral stops at the rear) Stop monitoring for 5 standard stops at the rear and right Tool changer 7873, 6-position linear pick-up, pneumatically liftable with cover for HSK holders integrated 2 additional mounts for HSK holders for tool changer 7873. Tool changer 7872, single aggregate magazine swiveling in X and Y directions 2 x vacuum pump 140 m³/h, dry-running Vacuum unit complete, (VP8) 250 m³/h, 400V additional (upgrade) Vacuum connection complete, 16-circuit vacuum VF16 Gsdpfx Ajygn Ibopwjbr LASER, alignment complete, dot laser complete, option ZB8 Lubrication complete, central lubrication on encoder side 2 x vacuum suction pads for smooth table surfaces, complete 140 x 115 mm, height 30 mm with connection hose 2 x vacuum suction pads for smooth table surfaces, complete 120 x 50 mm, height 30 mm with connection hose Conveyor belt complete, push-off conveyor belt AUT 5 10.7 push-off table Additional extraction via push-off conveyor belt Push-off device on gantry, controlled, incl. simultaneous extraction of the wear plate Label printer Direct Label 7507 and complete touch label light Option ZB74 TouchTool tool length measurement Availability: by arrangement Location: Bavaria

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Base machine - Dynestic 7535-R Automatic 12.7 Dynestic table For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Machining dimensions: Max. load on nesting table X = 3700 mm Y = 2200 mm Max. travel distances X = 5295 mm Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, continuous grooves in X and Y direction, Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm without tool, without mount 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) Gjdpfxezt Twyo Apwsbr 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Pressure booster, increases the standard pressure from 6 to 8 bar 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools:

Condition: used, Holz Her Sprint 1329 Black Edition Heavy-duty version - edge thickness 0.4 - 8 mm (15 mm with tool change) 18.5" touchscreen control, Power-PC color display Motorized, position-controlled bridge height adjustment Pre-milling unit for attachment before the gluing station Automatic infeed guide rail 1350 mm MOT Edge magazine, fully automatic for coil and strip material MOT Glue application station GLU-JET cartridges - hot melt and PU gluing, thin-film technology Edge height max. 60 mm Glue height adjustment / sensor nozzle High-gloss package Pressing unit 1913 mot., motorized-pneumatic NC servo axis Cutting unit for coil and strip material up to 15 mm edge thickness with electro-pneumatic adjustment of 0-10° bevel of the cutting saw Multi-function milling unit MOT 6 - NC control axes: Flush trimming 8 mm (15 mm) Radius milling Chamfer milling 0 - 15° Copy milling unit MOT 4, corner copying, postforming corners with 4 NC control axes, for milling the upper and lower longitudinal edge and copy milling the front and rear end edges, vertical edge, working height 60 mm Scraping blade unit MOT4 Surface scraping blade unit – finishing Buffing unit for final polishing and edge polishing with 2 textile discs Spray system for infeed and outfeed areas as well as antistatic agent at the pressing unit Infeed area: electronically controlled release agent spray device Pressing unit: electronically controlled antistatic spray device Outfeed area: electronically controlled cleaning agent spray device with cleaning agent First delivery 2018 / from lease return Machine is WORKSHOP OVERHAULED in TOP CONDITION Godpfxozdzlmj Apwjbr Available from stock, Lieboch

Condition: used, Holz Her Sprint 1321, with edge banding and PU adhesive application Heavy-duty version – edge thickness 0.4 – 15 mm SPS-based Edgecontrol control panel Motorized, position-controlled bridge height adjustment Pre-milling unit for attachment before the gluing station Fully automatic edge magazine for roll and strip material Gluing unit with cartridge system + PU adhesive application Automatic glue height adjustment / touch probe nozzle Pressure unit 1913, pneumatic Trimming unit for roll and strip material 1918 – 15 mm With pneumatic adjustment for trimming saw angle from 0-10° Multi-function milling unit with motorized adjustment: flush trimming – 15 mm, radius and chamfer milling – 15° Profile milling unit – corner rounding 1833 Scraping unit for chamfers and radii 1929, pneumatic Pneumatic infeed and outfeed Gbedpezp Hc Uofx Apwor Surface scraping unit – finishing, pneumatic Buffing unit for finishing and edge polishing with 2 textile discs HIGH-END spraying system Complete set of tooling Machine is in FULLY OPERATIONAL CONDITION Machine from a craft business / consignment sale Available from stock in Lieboch, NET € 21,500.00

Condition: excellent (used), HOLZ-HER EVOLUTION 7405 Connect machining center - used - Year of manufacture: 2022 Integrated vacuum pump Continuous processing 4-sided edge profiling possible Automatic vacuum cup positioning Hardened, dust-protected prism guides Ball screw spindles on all axes Gbodpfx Aozr Inqepwer Network card for remote maintenance Integrated control cabinet Control cabinet cooling with heat exchanger Handheld control unit Pick-up tool changer Changer for angle head Central lubrication, automatic Sensor for panel measurement Barcode scanner CLAMEX tools Angle gear for CLAMEX Additional infeed table ----- Technical data ----- Machining length (edge profiling - radius) X: 3,200 mm Machining length (edge profiling - radius) Y: 985 mm Min. workpiece length X: 200 mm Min. workpiece length Y: 70 mm Min. workpiece thickness: 8 mm Max. workpiece length X: 3,200 mm (longer with extension) Max. workpiece length Y: 1,200 mm (max. passage width) Max. workpiece thickness: 70 mm Main spindle motor power: 10.3 kW (S6) Main spindle speed: 1,000 - 24,000 rpm Main spindle mount: HSK-F63 Drilling unit motor power: 1.7 kW Drilling spindle mount: M10, interference fit 11 mm Number of vertical drilling spindles: 13 pcs Number of horizontal double drilling spindles in X-direction: 2 pcs Number of horizontal double drilling spindles in Y-direction: 1 pc Saw blade Ø of saw unit: x 20 x 5 mm Number of tools in the changer: 6 + 1 pcs Dust extraction port Ø: mm Compressed air connection: 6-8 bar Compressed air requirement: 200 NL/min Quality information: - Complete basic cleaning - Electrical system checked - Pneumatics checked - Adjusted according to manufacturer's specifications - Ready for immediate use

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Numerically adjustable infeed fence Air flotation infeed table Anti-adhesive liquid spray system Pre-milling unit with diamond cutters Edge feeder for edge banding from coil or strips Glue station for GlueJet cartridges or L-Tronic laser technology 4 pressure rollers with pneumatic pressure adjustment Gbodpjztkfbefx Apwsr Edge lubricant spray system Dual-motor precision end trimming unit with pneumatic angle adjustment Top and bottom edge surplus trimming unit (straight trimming) Numerically adjustable profile edge milling unit Flat scraper Profile scraper – two profiles Cleaning liquid spray system Pneumatically activated buffing units Pneumatically activated edge buffing unit Feed speed continuously adjustable from 10 to 25 m/min Automatic lubrication of the feed chain Frame support Minimum workpiece length: 140 mm Workpiece thickness: 8–60 mm Minimum workpiece width: 60 mm Year of manufacture: 2016

Condition: excellent (used), Year of construction: 2019, I sell the fully equipped edge banding machine Holz-Her Streamer 1057 XL, year 2019: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable Clue scrapers pneumatic adjustable Gbjdpfozr Rwhox Apwsr Cleaning brushes top + bottom Cleaning fluid spray front + back Control panel Working thickness adjustment manually Material height 8-60mm Edge thickness 0,4-8mm Feeding speed 10m/min. Total length including feeding plate 4200mm Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: excellent (used), Pre-cutter, adhesive unit for cartridges, guillotine, crosscut saw (front and rear), straight-line cutter, angle cutter, rounding scraper, corner scraper, cut-off saw, polishing machine, year of manufacture 2002. Gsdpjzik R Ajfx Apwebr

Condition: used, Holz Her Auriga 1308 XL Black Edition compact design – edge thickness 0.4 – 8 mm SPS screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor Pre-milling unit for attaching before the gluing section Edge magazine fully automatic for coil and strip material Glue application station GLU JET cartridges + PU gluing Fully automatic operation of the units via NC servo axes Workpiece height 6-60 mm Automatic glue height adjustment High-gloss package Pressure unit pneumatically controlled Cutting unit pneumatically controlled for coil and strip material up to 8 mm edge thickness with pneumatic adjustment of the cutting saw angle from 0-10° Gbodsznuncspfx Apwsr Milling unit MOT4, flush milling 8 mm, radius milling - chamfer milling via NC axes Shaping milling unit – rounding of edges up to edge thickness 3mm in a single pass via NC axes Scraping blade unit MOT for chamfers and radii with 2 scraping blade holders via NC axes Surface scraping blade unit – finishing Buffing unit – polishing Spray system in the infeed and outfeed area complete DIA tool set included First delivery in 2018 Machine in TOP CONDITION from a lease return available from stock in Lieboch