Used Holzher Cut 85 for sale (163)

Condition: excellent (used), Year of construction: 2020, 158.000 running metres BASE MACHINE AURIGA 1308XL TECHNICAL DATA Edge banding machine for edgebanding and finishing of sheet materials Edge thickness of roll material: 0.4-3mm (depending on material) Edge thickness of strip material: 0.4-8mm (depending on material) Edge cross-section: max. 6x42mm Edge height: max. 65mm Workpiece thickness: 8-60mm (restrictions possible for individual units) Workpiece width: min.65mm Workpiece length: min.160mm (without corner copying 1832) Workpiece length: min.180mm Feed speed: 10m/min. MACHINE OPERATION Edge Control 19 with 18.5" touchscreen colour monitor 16:9 Powerful control system with extremely simple operation for efficient machine set-up and changeover. Rotating and swivelling control panel at eye level Motorised pressure bridge adjustment iTronic - Adaptive pressure and adhesive quantity control Automatic, programme-dependent fine adjustment Optimum adaptation to edge thickness, edge materials and adhesive types guarantees the best processing results Automation package consisting of - Automatic glue quantity control - adaptive snipping knife - adaptive printing unit incl. residual adhesive quantity display incl. fully automatic PUR flushing routine Premilling unit FG201 with 2 milling heads for joining the panel edge 1x counter-rotating, 1xsynchronised, Milling cutter, diamond Ø70x64x30 mm,Z2+2 Edge feeder 1903 automatic transport of rolls and strips max. loading capacity: 40 mm Glu Jet GJ301 glue application system (2,3kW,50Hz) Automatic glue height adjustment Glu Jet hybrid technology for EVA and PUR adhesives Adhesives in cartridge and granulate form for neutral and coloured adhesives Hopper for 1.4 kg cartridges (4 cartridges) Hopper for 1.5 kg granulate Pneumatic pressure unit 1912-3 First roller driven with pneumatic immersion control, 2 conical holding pressure rollers Cutting unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12000 min-1) pneumatic swivelling 0/10° Dust extraction hoods for end trimming unit 1918 Multifunctional trimming unit 1827 MOT4 for trimming the top and bottom longitudinal edge with motorised positioning of the horizontal tracing shoes with motorised positioning of the trimming motors in axial direction incl. pneumatic adjustment (top and bottom separately) for flush-radius routing incl. blow nozzles - Flush cutting unit - Radius - Tilt the chamfer 0 - 15°, manually (with max. edge thickness 6 mm) Pneumatic swivelling device Bedsxayvpjpfx Abzjww for trimming unit 1827 MOT4 Pneumatic swivelling to bevel 15° from the control unit Pneumatic vertical tracer rollers Adjustment of the vertical tracer roller by 0.1 mm for routing with edge overhang Corner rounding unit (1x0,35kW,200Hz,12000min-1) Corner copying function up to 3 mm edge thickness Workpiece thickness: 12 - 60 mm, with DIA tool R=2mm Scraper unit 1929 MOT4 incl. high-gloss package with motorised adjustment of the horizontal feeler rollers, incl. pneumatic adjustment (separate top and bottom) Surface scraper FK701 With pre- and post-scraping for removing the adhesive residue along the complete panel length for a clean glue joint. Buffing unit 1940 (2 x 0,09 kW, 50 / 60 Hz, 1400 min-1) For finishing and polishing edges, with 2 textile discs, swivelling 0 - 5°

Condition: excellent (used), Machining center HOLZHER Dynestic 7521 -used- Nesting table, pusher with suction device, unloading unit with conveyor belt, hardened, dust-protected prismatic guides, 2-sided guided portal design, helical rack and pinion drive (X- and Y-axis), Network card for remote maintenance, Control cabinet cooling with heat exchanger, manual control unit, Swivel saw unit, Plate tool changer on the move, incl. step mats, laser, Automatic central lubrication, New industrial PC, incl. nesting software with free-form boxes ----- Technical data ----- Processing length X: 4,600 mm, Processing length Y: 2,100 mm, max. traversing speed X: 80 m/min, max. traversing speed Y: 100 m/min, max. traversing speed Z: 25 m/min, Machine control software: CAMPUS HOPS, Motor power main spindle: 7.5 kW, Main spindle speed: 1,000 to 24,000 rpm, Main spindle holder: HSK 63F, Bjdpfx Aeu R Tcrobzoww Spindle cooling: liquid, Motor power drilling unit: 3.0 kW, Mounting of drilling spindles: M10, fit 11 mm, Number of vertical drilling spindles: 18 pcs, No. horiz. Double drilling spindles in X-direction: 2 pcs, No. horiz. Double drilling spindles in Y-direction: 1 piece, Vacuum pump output: 500 m³/h, Suction connection Ø: 250 / 200 + 2x 80 mm, Compressed air connection: 6-8 bar, Compressed air requirement: 300 l/min. Quality info: - Complete basic cleaning - Electrics checked - Pneumatics checked - adjusted according to manufacturer's specifications - ready for immediate use

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, HOLZ-HER Dowel Drilling & Inserting Machine POWER-PIN 7605 • Minimum workpiece length 60 mm, maximum unlimited – limited only when workpieces are positioned against the stop elements. • CAPMUS V7x POWER-PIN software • LED strip for easy orientation • Dowel insertion unit DA102 for pre-glued dowels, as well as use with raw dowels in combination with white glue. Bjdpfx Abjxdlwgjzsww The POWER-PIN dowel machine – suitable as a standard dowel inserting machine or the perfect addition to, for example, nesting or console machines. From carcase furniture to high-quality solid wood drawers with a minimum material thickness of 12 mm, the 7605 is the ideal machine for drilling and inserting wooden dowels. The continuous LED strip displays the machine status and indicates to the operator the correct insertion position for the workpiece. A barcode scanner can be used to scan, for example, DataMatrix codes containing the processing instructions for the workpiece. Drilling positions and depths are automatically adjusted and approached by the machine. Also visit our Classic Shop on our homepage.

Condition: used, Year of construction: 2012, Used Machine Year of Manufacture: 2012 Base Machine - Dynestic 7521 20.6 Dynestic Table For classic nesting processing with wear plate Processing length 6250 mm (DYNESTIC 20.6 comes with additional 4th stop in Y already included) Machine frame in welded construction with ground and hardened prism guides for the gantry, unit head, and consoles Gantry-type design Rack and pinion drive, helical-toothed, in X and Y directions, Ball screw spindle in Z direction for precise positioning Technical Data: The technical data refers to the DYNESTIC 7521 - 20.6 Please refer to the respective datasheets. Processing Dimensions: Max. workpiece size for trimming: X = 6250 mm Y = 2100 mm Max. travel distances: X = 7360 mm Y = 2720 mm Z = 325 mm Max. clearance height on DYNESTIC table: Z = 1st level 318 mm / 2nd level 418 mm from table surface (without tool, without holder) Maximum programmable speed: Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and observation window Voltage 400 V, 50/60 Hz CONTROL: Bwodpfow I U Ecex Abzow Dual-core processor Operating system Windows XP 80 GB hard disk / 1 GB RAM RJ45 network port 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD writer) Remote maintenance Integrated network card for transmission of control and program data. Data transfer via high-speed internet connection required. Requirement: High-speed internet connection at the machine. DYNESTIC Table Fixed, continuous processing table with grid layout, continuous grooves in X and Y direction, distance between grooves 50 mm with 25 meters of sealing cord for fixing the wear plate 1 processing field with stop rails / stop Height 30 mm, pneumatically retractable 2 stop rails each in Y-direction and 1 stop in X-direction right side (from machine front edge perspective) Vacuum Fields Single-circuit vacuum system Drilling Unit 7976, 24 spindles Motor power 3.0 kW 18 vertical spindles, individually selectable L-shaped arrangement: 10 in X and 8 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from mounting end (depending on board thickness) Spindle extension stroke: 70 mm Rotation: Alternating right/left n(max.) 1000 - 5710 rpm steplessly adjustable Mounting: M10 thread - 11 mm fitting Without tool, without holder 6 horizontal spindles 2 double drilling spindles in X-direction (Distance 32 mm between 1st and 2nd horizontal spindle) 1 double drilling spindle in Y-direction Mounting: M10 thread, 11 mm fitting Max. total drill length 70 mm from mounting end Without tool, without holder Free slot 1 for: Optional double drilling spindle in X-direction or Vertical adapter with double pressing force Free slot 2 for: Optional saw in X-direction or Vertical adapter with double pressing force Milling Unit 7831, 2-stage Power: 11.0 kW (S6) n(max.) = 1000 - 24000 rpm, steplessly adjustable, two-stage feed stroke max. power at 12000 rpm to 24000 rpm Air-cooled with HSK-F 63 tool holder with right-hand rot...

Condition: excellent (used), Year of construction: 2015, HOLZ-HER Sprint 1329 - Used edge banding machine in good condition. - Year of manufacture: 2015 - Includes BARBARIC return conveyor (year: 2017) - Available from end of November/beginning of December 2025 Please feel free to contact us if you have any questions. Bjdpfx Aexducrsbzsww

Condition: ready for operation (used), Year of construction: 2000, Holzher 1417 edge banding machine Gluing thickness 8 mm feed speed 11 m/min Joint trimming with DIA tool type 1961 Snipping unit 1918 Flush trimming unit 1823 Multifunction unit 1942 Scraper unit 1929 R2 Copy trimming unit 1983 Bsdsuaqh Uopfx Abzsww Surface scraper unit 1964 Buffing unit 1944 K Condition checked for function Year of construction 2000 Price 12000.

Condition: good (used), Year of construction: 2000, I sell the edge banding machine Holz-Her Sprint 1417 year 2000: Premilling Edge banding patron glue End cutting saws Bwjdpfx Abjd Nukqezow Strong flat milling Tilting radius milling Radius scrapers Corner rounding 1-motor Glue scrapers Polishing brushes New sharpened tools, new display, fully working. CE Mark. Good condition. With full documentation.

Condition: ready for operation (used), IM Very good condition. Bwodpfxjvunm Ae Abzow

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,747 mm, travel distance Y-axis: 1,554 mm, travel distance Z-axis: 325 mm, workpiece length (max.): 3,620 mm, workpiece width (max.): 1,500 mm, workpiece height (max.): 180 mm, Equipment: rotational speed infinitely variable, Holz-Her / Machining Center PRO-MASTER 7017 - 2 software licenses (Office & Machine) Campus V8 CAD / CAM software - Machining area for milling = 3425 x 1287 mm (minus cutter radius) - Maximum workpiece height: 180 mm, measured from the top edge of the vacuum cup: 125 mm. - Maximum pass-through width at hood: 1450 mm (Y-direction) - The milling spindle delivers 10.3 kW (S6) and accepts tools with a maximum diameter of 160 mm via HSK interface. - Vector axis / C-axis can be retrofitted - Drilling unit with 14 spindles: 10 vertical and 4 horizontal. Maximum drill diameter: 35 mm. Integrated saw unit for a saw blade with a maximum diameter of 125 mm and 4 mm thickness. - 12-position linear pick-up tool changer for HSK 63F holders for tools up to a maximum diameter of 95 or 100 mm. Bjdpfjxdlrdox Abzsww Please also visit our "Classic Shop" on our homepage.

Condition: used, Year of construction: 2001, Used machine Year of construction: 2001 Condition: Function tested Equipment and technical data: Milling aggregate 4.4 kW HSK 63 F tool holder Speed 1,000 - 18,000 rpm water-cooled Tool changer: 4-fold lateral Drilling head: 9 vertical drilling spindles in 32 mm increments Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X-direction Control: Twin CAm 32 Vacuum pump 40 cbm/h Incl. vacuum cups Travel distances: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Weight: approx. 3,500 kg Machine is delivered complete in all mechanical, electrical and Bsdpfew I Ug Hex Abzoww electronic components and overhauled where necessary All guides checked; console guides replaced New PC control unit for the TWIN CAM control system All axis modules checked and serviced Location: Hochheim Availability: by arrangement

Year of construction: 1994, condition: used, functionality: fully functional, Available immediately! Bwedpoiffpmefx Abzew

Condition: used, Year of construction: 1999, Holz-Her SPRINT 1411 edgebander Description Workpiece thickness min./max. 6/45mm Automatic edge feeder (coil up to 5mm) Workpiece min. 60mm Workpiece length min. 180mm Cartridge glue system (short heat up time 2-3 min.) End trimming unit Flush trimming unit Scraping unit (flat) Buffing (brushing) unit CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). Bwsdpsw Ebrxjfx Abzew (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf).

Year of construction: 2006, condition: ready for operation (used), Glue type: PUR glue, glue application system: cartridges, max. edge thickness: 25mm, max. workpiece thickness: 60mm, feed rate: 16m/min, min. workpiece length: 140mm, min. workpiece width: 60mm. Including various spare parts and Ligmatec return. Documentation available. On-site inspection is possible. Bedpfx Abjugmw Eszeww

Condition: excellent (used), Horizontal milling machine Spindle diameter: 40 mm Bodpsw N Ryrefx Abzoww Spindle length: 220 mm Maximum spindle diameter: 250 mm

Condition: good (used), Year of construction: 1988, Work piece thickness 0,4 - 8 mm Work piece height max. 51 mm Min. work piece width 50 mm min work piece length 180 mm edge magazine for PVC and strips pneumatic pressure rollers for edge magazine edge snipping unit cutting unit with 2 saws milling aggregate buffing unit Feed speed 11 m/ min Glue application with fin nozzle Bjdpjbahd Eefx Abzoww Air pressure 6 bar length 3750 mm

Year of construction: 1994, condition: used, Used machine Bjdow I Urvopfx Abzsww Year of manufacture: 1994 Condition: age-appropriate Equipment and technical data: Edging thickness max. 8 mm Workpiece thickness max. 60 mm Workpiece width min. 90 mm Operation via foot pedal Incl. extendable workpiece support Incl. chassis Incl. buffing unit Dimensions: approx. 700 x 600 x 1300 mm Weight: approx. 140 kg Suction nozzle: 70mm Availability: short term Location: Flörsheim

Condition: used, Year of construction: 1997, HolzHer Edge Bander 1436SE Year of manufacture: 1997 Bwjdowv Uq Aopfx Abzow - PVC Primus, 3mm PVC cartridge system - Edgebanding, flush trimming saw, flush trimming, bevel milling, radius milling - Scraper blade, buffing unit - Dimensions: 4700mm x 1400mm; Height: 1650mm - Weight: 1300kg - Working dimensions: Length 4500mm Depth 1020mm Height 1630mm - Connection socket: 140mm Ø - Workpiece width: min. 60mm - Feed speed: 11m/min - 6 bar - 400 Volt compressed air - Edge thickness: 8mm for strips, 2mm for rolls

Condition: good (used), Year of construction: 2000, I sell the 3-axis CNC working centre HOLZ-HER ECO-MASTER 7113 with beam table Year 2000. Configuration: 3-axis main spindle 7,5 KW Tool magazine 4 positions HSK63 1 grooving saw X-direction Drilling head 9+2 spindles Useful working area 2300 x 1000 x 130mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. Pump RIETSCHLE 2,2 KW Bodpfett Sy Hsx Abzeww Good condition. Available immediately.

Condition: used, Year of construction: 2010, Used machine Year of manufacture: 2010 Condition: Completely overhauled, excellent! Feed speed: infinitely variable, 10-18 m/min Control unit: edge control 19 with 18.5" color touchscreen display Jointing milling unit 1802 Edge feeder 1901 Glue application station Cartridge 1906MG, with tracking nozzle and automatic glue height adjustment Pressure unit 1913, pneumatic End trimming unit 1918 Multifunction milling unit 1826 MOT 6 with 6 servo axes for flush, radius, and bevel milling Bwsdpow I Uhqofx Abzow Copy milling unit 1983 Radius scraper unit 1929 with pneumatic adjustment (retrofitted; see photo) Flat scraper 1964 Workpiece thickness: 6 - 60 mm Edge thickness: 0.4 - 8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Total length: 5195 mm Extraction connection: 180 + 80 mm, 2100 m³/h Compressed air connection: 6 bar / 327 NL/min Weight: approx. 2200 kg Availability: approx. 2-3 weeks after order confirmation Location: Flörsheim

Condition: new, Year of construction: 2023, Demo machine Year of manufacture: 2023 Equipment and technical data: Base machine 1057 XL C with Beckhoff touch-screen control Extendable workpiece support 600 mm Long infeed fence 1252 mm Bwodpfx Asw I Uytsbzew Jointing milling unit with 2 motors DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation Edgebanding unit 1903 fully automatic Glujet 301 adhesive application system Automatic reloading function Magazine for 1.4 kg adhesive cartridges (holds 4 cartridges) GluJet collection container Pressure unit 1912-3 pneumatic Spray unit GM 201 after pressure unit End trimming unit 1918 pneumatic Extraction hoods for end trimming unit Combination milling unit FR201 with DIA cutters R=2 mm Profile trimming unit 1832 Shelf program Radius scraper ZK 301 Chip collection box Flat scraper FK 701 Spray unit front and rear TR201 Buffing unit 1940 Location: Solingen Availability: short notice

Condition: used, Year of construction: 2019, Used Machine Year of manufacture: 2019 Base Machine - DYNESTIC 7532-10.5 Automatic Dynestic Table For classic nesting machining with wear plate Processing length: 3100 mm Machine frame in welded construction with ground and hardened prism guides for the moving gantry, aggregate head, and consoles Gantry-type moving gantry Rack and pinion drive, helical gear, in X and Y axes, Ball screw drive on Z-axis for precise positioning Bodpfx Aewkbbdsbzeww Technical Data: Working dimensions: Maximum support area on nesting table: X = 3100 mm, Y = 1560 mm Maximum travel distances: X = 4695 mm Y = 2100 mm Z = 293 mm Maximum clearance height DYNESTIC table: Z = 100 mm from table surface (without wear plate) Maximum programmable speed: Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min DYNESTIC table: Fixed, continuous processing table with grid pattern, continuous grooves in X and Y direction, groove spacing 50 mm with 25 meters of sealing cord for clamping the wear plate Vacuum Fields: 1-circuit vacuum system Drilling Unit 7877, 19 spindles Drive power: 1.7 kW 13 individually controllable vertical spindles U-shaped configuration 5+4 in X-direction and 4 in Y-direction 32 mm pitch Maximum drill diameter: 35 mm Total drill length: 70 mm from mounting end (depending on panel thickness) Spindle stroke: 70 mm Rotation: Alternating right / left Speed (n(max.)): 1000 – 4400 rpm, infinitely variable Mounting: M10 thread - 11 mm fitting Without tools, without holders 6 horizontal spindles 2 double drilling spindles in X-direction 1 double drilling spindle in Y-direction Mounting: M10 thread, 11 mm fitting Total drill length max. 63 mm from mounting end Without tools, without holders Milling Unit 7842: Power: 12.0 kW (S6) Speed (n(max.)): 1000 – 24000 rpm, infinitely variable, max power at 12000 rpm up to 24000 rpm air cooled with HSK-F 63 tool holder with right-hand thread nut (for right-hand rotating tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Maximum tool weight: 6 kg (incl. holder) Tools: Milling and grinding tools max. diameter 160 mm Safety enclosure according to CE regulations Safety fence at sides and rear Vacuum pump 500 m³/h dry-running Personnel safety through light barriers in front area of the machine Handheld remote control for machine operation to include the following operating functions: > Start/Stop of processing program > Speed control of processing cycles > Reset button > Manual feed/rapid traverse for all axes > Emergency stop CAMPUS V7 CAD/CAM Software 1x machine license Consisting of: 1. CAMPUS NC-HOPS 2. CAMPUS MT-Manager 3. CAMPUS Workcenter 4. CAMPUS DXF interface CAMPUS NC-HOPS Graphical variant system with WOP and CAD/CAM functionality for creating part variants using macro technology Automatic central lubrication Automatic lubrication at defined intervals Additional sealing against dust through overpressure in each carriage Simultaneous lubrication for all linear guides in X, Y, and Z axes, for all ball screw drives in Y and Z axes, for all milling spindle

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Base Machine - DYNESTIC 7532-10.5 Automatic Dynestic Table For classic nesting operations with wear plate Processing length: 3100 mm Machine frame of welded construction with ground and hardened prism guides for the gantry, tool head, and consoles Gantry-type carriage Helical rack and pinion drive in X and Y axes, Ball screw in Z axis for precise positioning Bedewka Upepfx Abzsww Technical Data: Processing dimensions: Maximum workpiece area on nesting table: X = 3100 mm, Y = 1560 mm Maximum travel paths: X = 4695 mm, Y = 2100 mm, Z = 293 mm Maximum clearance height on DYNESTIC table: Z = 100 mm from table surface (without wear plate) Maximum programmable speed: Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min DYNESTIC Table: Solid, continuous machining table with grid pattern, continuous grooves in X and Y directions, groove spacing 50 mm with 25 meters of sealing cord for clamping the wear plate Vacuum zones: Single-circuit vacuum system Drilling unit 7877, 19 spindles Drive power: 1.7 kW 13 individually selectable vertical spindles arranged in U-shape 5+4 in X-direction and 4 in Y-direction 32 mm pitch Max. drill diameter: 35 mm Total drill length: 70 mm from mounting end (dependent on panel thickness) Spindle stroke: 70 mm Direction of rotation: alternates clockwise/counterclockwise n(max.) 1000 - 4400 rpm, steplessly adjustable Mount: M10 thread - 11 mm locating seat Without tools, without collet 6 horizontal spindles 2 double drilling spindles in X-direction 1 double drilling spindle in Y-direction Mount: M10 thread, 11 mm locating seat Max. total drill length: 63 mm from mounting end Without tools, without collet Milling unit 7842 Power: 12.0 kW (S6) n(max.) = 1000 - 24000 rpm, steplessly adjustable, Max. output at 12000 - 24000 rpm air-cooled with HSK-F 63 tool holder with right-hand thread (for right-handed tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (including holder) Tools: milling and grinding tools max. Ø 160 mm Safety enclosure according to CE standards Safety fence on the sides and rear Vacuum pump 500 m³/h, dry-running Personnel safety via light barriers in the front machine area Handheld remote control for machine operation with the following functions: > Start / Stop machining program > Speed adjustment of machining cycles > Reset button > Manual feed / rapid traverse for all axes > Emergency stop CAMPUS V7 CAD/CAM software 1x machine license Consists of: 1. CAMPUS NC-HOPS 2. CAMPUS MT-Manager 3. CAMPUS Workcenter 4. CAMPUS DXF interface CAMPUS NC-HOPS: Graphical variant system with conversational and CAD/CAM features for creating part variants using macro technology Automatic central lubrication Automatic lubrication at defined intervals Additional dust sealing by positive pressure in each guide carriage Simultaneous lubrication for all linear guides in X, Y, and Z axes, for all ball screws in Y and Z axes, for all milling spindle guides

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Cutting height 2200 mm x cutting length 5300 mm Bsdpfxewwdt Ns Abzoww (Edging height / max. horizontal cutting height 2110 mm) PowerPackage 400 V The package consists of the following options: 1. TRK extraction unit 2. SuperCut scorer 3. Vertical digital display 4. Stepless speed control (9 kW output) Pneumatic aluminum slatted support Medium workpiece support on all fields Strip stop for recurring horizontal cuts Digital measurement display for horizontal cut at control panel Visible cut line laser Paper storage compartment Narrow parts device (2 pieces) Location: Solingen Availability: Short-term

Condition: new, Year of construction: 2023, MACHINESEEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. ----- New machine Year of manufacture 2023 Equipment and technical specifications: ARTEA 1030 BASE MACHINE Extendable workpiece support, 500 mm spacing Bedpfx Abowuwv Sszoww Additional rigid workpiece extension, length 3080 mm Edge Control BC 15 with 15.6" touchscreen (Visual Setting mode) LED machine lighting for the processing units FG101 jointing unit with 2 diamond milling heads MG101 edge feeder Glu Jet GJ101 adhesive application system (2.3 kW, 50 Hz) Storage compartment for 1.4 kg cartridges (4 cartridges) GLU JET collection container Automatic reloading function KA101 trimming unit (50 mm) DW101 pressure unit Trimming, single-motor, linear guide FR101 multifunction trimming unit Flush 5 mm, R 2 mm Corner copying unit FF101, single-motor, linearly guided, 45 mm Scraper unit ZK101 Chip collection box Surface scraper FK101 Buffing unit SW101 Spraying device TR101 for the inlet and outlet areas Horizontal spraying device GM101 after the printing unit Availability: Short term Location: Hochheim

Condition: new, Year of construction: 2022, Exhibition machine Year of manufacture: 2022 Equipment and technical data: Base machine 7402 with Pin-Jet dowel insertion function Bwsdewt E Tvjpfx Abzow Hand control device 2D barcode scanner UPS Quattro-HSK package incl. 4-position tool changer XL drilling head Double drilling spindle in Y-axis Automatic central lubrication Location: Hochheim Availability: approx. week 32/2022