Used Holzher Evolution for sale (174)

Condition: excellent (used), Cutting height: 210 cm Cutting length: 500 cm Cutting depth: 60 mm Podpszi Dm Rsfx Abpora Engine: 4 kW Overall dimensions: Length 600 cm, Height 300 cm, Width 160 cm

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Working range X: 6000 mm Working range Y: 1400 mm 4-axis electro-spindle, power 16 kW Fixedly installed saw blade Fixedly installed clamping unit Vertical drilling bits: 18 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Pick-up tool changer, 1 position Pedpfx Abey Um Nzepsra Linear tool changer, 16 positions Linear tool changer, 6 positions Circular tool changer, 18 positions Worktable with 10 rails WS10 "MultiClamp" frame clamping device Software: Campus Manual control panel for remote operation 250 m3/h vacuum pump Safety mats Includes 2 aggregate heads (1 Vario NC and 1 with 4 horizontal outlets) and suction cups Only 943 operating hours Available February 2027

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 558/0-112, functionality: fully functional, Weight approx. 1950 kg Control panel 1888 Pre-milling unit 1961 Psdsh Uyg Eepfx Abpora Edge feeder 1901 Sensing nozzle Printing unit 1913 MOT Cutting unit 1918 Milling unit 1942, top Milling unit 1942, top/bottom for rounding Pull blade 1929 Contour milling unit 1983 Surface pull blade 1964 Smoothing unit 1944 Length approx. 5900 mm Connected load 21.4 A

Year of construction: 1995, condition: not inspected (used), Connected load 380V 55A PMS control Pre-milling unit 1961 Magazine 1901 Glue station 1906 Printing unit 1926K Snipping unit 1916 Flush trimming unit 1962 Profile trimming unit 1966, 3 mm rounding up to 15 mm flush Rounding scraper 1927 Shaping trimming unit 1983 Buffing unit 1941 Predsnxkm Ejpfx Abpea Extraction 1x160 1x125 mm Compressed air connection 6 bar

Condition: used, Year of construction: 1988, machine/vehicle number: 387/8-84, functionality: fully functional, type of input current: three-phase, workpiece height (max.): 45 mm, edge thickness (max.): 51 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,280 mm, total length: 3,750 mm, total width: 850 mm, overall weight: 756 kg, Equipment: CE marking, documentation/manual, Mode of operation: hot/cold process, one-sided left Edge band thickness: 0.4 - 8 mm Maximum edge band height: 51 mm Workpiece dimensions: width min. 50 mm, length min. 180 mm, thickness min. 6 mm Predey Dh D Espfx Abpoa Feed speed approx. 11 m/min Glue application via blade nozzle End trimming Flush trimming – tiltable up to 15 degrees Radius trimming – tiltable up to 15 degrees Buffing unit Compressed air requirement: 6 bar

Condition: reconditioned (used), Year of construction: 1993, machine/vehicle number: 869/9-302, functionality: fully functional, Rated power: 380V, 21A Edge magazine Gluing station 1906 Printing unit 1914 Cross-cutting saw unit 1976 Routing unit for rounding 1943 Rounding cutter blade 1927 Sanding unit 1944 Control panel (located) on top Dust extraction nozzle, D = 100 mm Pedpfx Aoiamufjbpora Operating manual No quick-change unit for flush trimming

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 315/0-110, functionality: fully functional, Control panel, top Edge feeder 1902 Glue application station 1906 Predpjh Ux Suefx Abpoa Cutting unit 1902 Printing unit 1816 Cutting assembly 1918 Milling assembly 1942M Rounding draw knife 1929 Form milling assembly 1983 Surface draw knife 1964 Smoothing assembly 1940 Weight approx. 970 kg Compressed air connection, 6 bar Extraction connection, Ø 120 mm Length approx. 5300 mm

Condition: not inspected (used), Year of construction: 1991, Power connection 400V / 11kW Dust extraction connection Ø 1x100 mm Compressed air connection 6 bar Weight approx. 980 kg Podpoiw D Udsfx Abpjra Width min/max 760 / 1605 mm, length 4425 mm, height 1720 mm Workpiece thickness min. 6 mm, max. 45 mm Workpiece length min. 180 mm Workpiece width min. 60 mm Feed rate 13 m/min Edge thickness max. 5 mm, strip material 3 mm Edge magazine 1301 with DAZ 11 Gluing station 1906 Pressure unit 1914 Cutting unit 1976 Flush trimming unit 1942 Radius R2 trimming unit 1943 Scraper blade 1927 Smoothing unit 1944

Condition: not inspected (used), Year of construction: 2006, for coil and strip material from 0.4 - 15 mm max. panel thickness 60 mm max. edge overhang 66 mm large magazine table, D = 820 mm transport chain with automatic lubrication idler roller for shortest workpiece sequence safety/soundproof hoods central dust extraction connection, D = 160 mm, edge trimming units, D = 120 mm chip collection box, D = 100 mm equipped with: > Edge trimming units 1961 incl. DIA cutter > Memory-programmable screen control Edgecontrol Predpey Ici Refx Abpja > Automatic edge magazine 1901 for coil and strip material > Gluing station 1905 for cartridges + granules incl. sensing nozzle > Pressing unit 1926, motor-driven/pneumatic > Cutting unit 1819, motor-driven > Flush trimming unit 1962 > Multi-function trimming unit 1966 with various radii/chamfers > Multi-radius draw blade unit 1965 with various radii > Corner copying unit 1983, R = 2 mm incl. one interchangeable motor, R = 1 mm > Straight draw blade 1964, controlled by program > Deburring unit 1944, controlled by immersion > Spray device 1856 at the infeed and outfeed > Belt bridge > stepless feed rate up to 24 m/min > Shear arm > motor-driven bridge adjustment > infeed guide rail, motor-driven adjustable Length 8200 mm Width 1300 mm Height 2000 mm Weight 3300 kg

Condition: reconditioned (used), Year of construction: 1987, machine/vehicle number: 1277/8-71, functionality: fully functional, Connected load: 380V, 7A Pjdpoh U Sqrofx Abpera Cutting length: 4300 mm Cutting height: 1925 mm Frame height: 2210 mm Machine height: 2500 mm Room height: 2540 mm Edge trimming height: 1870 mm Passage height: 1940 mm

Condition: used, total height: 1,600 mm, total length: 1,500 mm, total width: 800 mm, overall weight: 440 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Psdjy Uwq Aopfx Abpora Trimming unit: yes Panel support guides: yes Number of edge processing units: 1 Processing unit: rough trimming on top and bottom Number of finishing motors: 1 MACHINE DETAILS Model: UF 362 / 2713 Type: Manual sanding machine EQUIPMENT Trimming unit Panel support guides

Condition: used, machine/vehicle number: 008494, Position 1: Single Edgebanders HOLZHER-LUMINA + MASTER 5510 Podpfx Aszbxznjbpora Position 2: Panel Return Systems HOLZHER-LUMINA + MASTER 5510

Condition: used, Year of construction: 2011, total height: 1,730 mm, total length: 6,100 mm, total width: 1,440 mm, Colour: Grey Weight: 2.500 kg - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 5/1-107 - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Radius scraping unit Pedpfxsyf Dakj Abpera - - Tools available: Yes - └ 8th unit type: - - Tools available: Yes - └ 9th unit type: Flat scraping unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 21.9 - Fuse [A]: 50 - Transport dimensions: 6100mm x 1440mm x 1730mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2010, functionality: fully functional, Used Holz-Her Cut 6120 - Year of manufacture: 2010 - Availability: End of September 2026 - Automatic cutting height adjustment - Scoring unit - Saw blade projection: 82 mm - Label printer - Cutting length: 4400 mm - Electronically controlled pressure beam and saw carriage for short cycles Predpfx Aoziwqpobpea - Grooving program / motor-adjustable

Condition: good (used), Year of construction: 2002, functionality: fully functional, Edgebander HOLZHER, type 1310, equipped with: cartridge glue station, flush end trimming, two multi-milling units, profile scraper, buffing units, condition good Pjdpox H Sutsfx Abpora

Condition: excellent (used), Year of construction: 2022, • Cutting height 2200 mm x cutting length 4300 mm • Extraction to CE TRK Regulations CH 2200 (less than 2 mg of fine dust/m³ air) • Middle workpiece support - 4 zones • Sliding carriage 1255 for cutting height 2200 mm • Saw unit 4,0 kW, 5400 min-1, 400 V, 50 Hz incl. HW-saw blade Ø 250 x 30 x 3,2 mm, Z 48, Hohl-Dachzahn • Length stop (manual) with digital read out for vertical cuts. For middle workpiece support • Digital display for horizontal cuts at the control panel incl. electrical fine adjustment Prodpfxoy Nmtce Abpoa • 3 adjustable stop points in the saw beam for repeating horizontal cuts via stop point • Strip stop for repeating horizontal cuts, Scale in mm, max. strip height 650 mm • Narrow part device (2 pcs) Avoids tilting of workpieces • Super Cut scoring device: For scoring the surface of covered materials. • Cutting optimization Opti-Base V-Cut 1 pc 10ˇTouch-screen 1 pc Software machine 1 pc Software office- 1 place floating network license (Opti V-Base) 1 pc label printer • Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Year of construction: 1989, condition: good (used), - tilting spindle under the account - shaft diameter 50mm - up and down adjustment - pneumatic adjustment of the spindle position - 400V power supply - THE FEED IS NOT THE SUBJECT OF THE OFFER Pedpfx Abegxpilepjra

Condition: used, Year of construction: 2021, functionality: fully functional, For Sale: Premium Holz-Her 1329 Multi Edgebander + Return-Master 5920 We are selling a high-end Holz-Her 1329 Multi edgebanding machine, including the Return-Master 5920 return system. The unit is 4 years old and in excellent condition. Pedpfjygrghex Abpora Original New Price: €138,000 + VAT Our Price: €69,000 + VAT (50% savings) Why choose this machine? Get a premium, lightly used machine for the same price as a subsidized unit, but without the paperwork, bureaucracy, or long-term obligations of a grant application. Maintenance: Regularly serviced by the expert Dimpex technical team. Performance: High-spec "Multi" version for versatile production needs. Serious inquiries only, please.

Condition: excellent (used), functionality: fully functional, Edge banding milling machine with Holz Her 3-roller feed, 30 mm spindle, 50 mm milling width, machine size: 1000 x 1000 x 1300 mm, weight 250 kg, good condition, fully functional. Shipping available at additional cost! Due to the age of the used machine, warranty is excluded when sold to commercial customers. Pjdpfx Aovkgdrsbpora

Condition: excellent (used), functionality: fully functional, A Great Machine for edging doors and cabinets with solid edging, this machine will do a 20mm solid edge. Podpfx Abjzif Ezopera

Condition: good (used), Year of construction: 2001, I sell the 3-axis CNC working centre HOLZ-HER UNI-MASTER 7226 with beam table Podpfx Aoi U Dxuebpera Year 2001. Configuration: 3-axis main spindle recently full reconditioned / Water cooled Tool magazine 6 positions HSK63 on working head 1 grooving saw X-direction Drilling head 16+4 spindles Useful working area 3100x1360mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. 2x Pump SIEMENS ELMO-L S22 2,35KW. Good condition. Available immediately.

Condition: good (used), Year of construction: 2009, I sell the 3-axis CNC working centre HOLZ-HER PRO-MASTER 7023 with beam table Year 2009. Configuration: 3-axis main spindle 6 KW Tool magazine 8 positions HSK63 1 grooving saw X-direction Drilling head 16+4+2 spindles Useful working area 3200 x 1060 x 378mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Psdpjtt S D Rjfx Abpsra Holzher software controller with full instructions. Pump BECKER 250 m3/hr. Good condition. Available immediately.

Condition: excellent (used), Year of construction: 1980, I sell the small double side moulder Holz-Her 1710. Feeding with top Feeder Working width 110mm Working height 90mm 2 spindles Configuration: right - left 3KW Total power apprx. 5,5kW Prjdpfxsyc N Eaj Abpsa Machine suitable for small elements, lamellas, beehives. Fully working! Very good condition. Sellable immediately

Year of construction: 2010, condition: excellent (used), I sell the automatic vertical saw without scoring knives HOLZ-HER Supercut. Prjdpfopl Svcox Abpsa Cutting range 5300x2200mm Motor 3,0kW. Cutting head tilting 0-90° Main saw blade 240-250mm / 2850rpm. Condition very good. Available immediately.

Condition: used, Year of construction: 2014, For inquiries: Zoltán Utasi +36 30 205 7380 • motorized pressure bridge adjustment • Electrical system for stepless feed 400 V / 50 Hz, 2.2 kW • “Control PPC 221 – with 8.4'' VGA color display” High-performance control with very simple operation • Edging pre-milling unit 1802, 400 V (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for pre-milling the panel edge • Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation For pre-milling unit 1801 / 1802 • Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right-hand rotation For pre-milling unit 1801 / 1802 • Edge feeding unit 1903 SYNCHRO automatic transport of rolls and strip material • Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) • Pressure unit 1913 pneumatic first roller driven, 2 additional pressure rollers with pneumatic individual control • Cut-off unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically swivelable 0/10° • Multifunction milling unit 1827 pneumatic (2 x 0.65 kW, 200 Hz, 12,000 rpm) • Vertical tracing rollers manual manual adjustment of the vertical tracing roller by 0.1 mm for milling edge overhang, e.g. for plastic edges • Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, left-hand rotation Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E • Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, right-hand rotation Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E • Corner copying unit 1832 (1 x 0.35 kW, 200 Hz, 12,000 rpm), for edge thickness up to 3 mm • Cutter, diamond Ø 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm, with CM technology (LEUCO system) with integrated chip extraction, for profiling unit 1832 • Scraper unit 1929 pneumatic including pneumatic adjustment (separately for top and bottom) • HW reversible knives for scraper holder 1929 / 1927 R = 2.0 mm (2 pcs required) • Flat scraper unit 1964 Removing glue residue for a clean glue joint. • Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) For final cleaning and edge polishing. With 2 textile discs, swivel range 0–5° Psdpsx Huhcefx Abpora