Used Holzkraft Sc 2 Classic for sale (187)

Condition: new, Year of construction: 2026, Cut-size circular saw with tiltable saw blade and high-quality sliding table made of anodized aluminum Cutting plane of the small-format circular saw directly on the roller table Precision-guided sliding carriage made of anodized aluminum, standard finish Large table arm guided on telescopic arm and longitudinally adjustable The standard table widening and table extension allow easy working with larger workpieces. The large dimensioned sawing unit made of grey cast iron is double mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground grey cast iron, therefore extremely robust and insensitive smooth running and precise cuts Aluminium sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail 10 years HOLZKRAFT warranty on wear of hardened guideways Telescopic stop Extendable aluminium telescopic stop Angle adjustable With two professional folding fences Rip fence Standard with fine adjustment and quick clamping Scope of delivery: Table extension Table extension Anodized aluminium sliding carriage Rip fence with round bar guide and fine adjustment Model SC 2 classic Article no. 5504215 Technical data table dimensions 1020 x 325 mm Bedpfx Ascnxamogksld table height 900 mm working length 1660 mm Cutting height max. 90° with scoring 100

Condition: new, - NEW-descriptionCutting plane directly on the saw bladeHeavy steel and cast iron constructionPrecision-guided format sliding carriage made of aluminium,anodized as standardLarge-area table extension guided on a telescopic arm andlongitudinally adjustableExtendable aluminum telescopic fence, angle adjustable with professionalstop flapsRip fence with quick release and fine adjustmentLarge work table made of milled gray cast iron stays permanently flatThe standard table extension and table extension enable easy work with larger workpiecesQuiet running and precise cutsEquipped with a powerful three-phase motorThe large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service lifeMaximum cutting height is also achieved with the built-in scoring deviceEquipment details:Double cradle saw unitGenerously dimensioned, made of steel/cast ironClose to the saw blade, supported on both sides for precision, smooth running and a long service lifeAdjustable in height and up to 45° with a crankMaximum cutting height is also achieved with the built-in scoring deviceAlso available with scoring unittelescopic stopExtendable telescopic stop up to max. 2550 mmAngle adjustableWith professional stop flapsAluminum sliding carriageWith a thousand times proven ball contact systemInsensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail10-year Holzkraft guarantee on wear and tear on the guidewaysRip fence with round rod guideWith fine adjustment and quick releaseStable round rod guide made of ground steel with a diameter of 45 mmCan be folded down as standard for cutting large workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 380 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmMachine body length 1388 mmWorking area length 1000 mmMachine body width/depth 689 mmWorking area width/depth 2000 mmSpace required length 5118 mmSpace requirement width/depth 3830 mmelectrical dataConnection voltage 400 VDrive motor power 5.0 kWPhase(s) 3 PhNominal operating mode drive motor S6Type of current ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat slide length 2250 mmTable length 840 mmFormat sliding carriage width 270 mmTable width 560 mmFormat sliding carriage height 124 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting height 90° 90 mmMax. cutting width to the left of the saw blade 2310 mmMax. cutting height 45° 63 mmtrimming length 2250 mmSaw blade diameter 315 mmSaw blade inclination 90 - 45°Saw blade speed 4000 rpmArt. No. 5504323Ausziehbarer Teleskop-fence to max. 2550 mmWinkeladjustableMit Profi-AnschlagklappenAluminium-sliding tableMit tausendfach bewährtem KugelkontaktsystemStaub- and schmutzunempfindlich durch minimalen Berührungspunkt zwischen Kugel and Trapezschiene10 Jahright hand Holzkraft-guarantee on abrasion der Führungsbahnenrip fence with round rod guidingMit fine adjustment and quick clampingStabile round rod guiding aus geschliffenem steel with 45 mm diameterSerienmäßig tiltable for den Zuschnitt großer WerkstückeTechnische Daten:dimensions and Gewichteweight (Netto) ca.   380 kgAnschluss Absaugungsuction nozzle diameter   120 mmsuction nozzle diameter Sägeblattschutz   60 mmAufstellinformationenTransportbreite   900 mmErläuterung required spaceDie d... Bljdsvyuqfopfx Agked

Condition: like new (used), Year of construction: 2023, machine/vehicle number: KK00040333, power: 4 kW (5.44 HP), cutting height (max.): 100 mm, cutting width (max.): 700 mm, saw blade diameter: 315 mm, height adjustment type: mechanical, overall weight: 277 kg, cutting length (max.): 1,600 mm, cutting width at rip fence: 700 mm, Circular saw minimax sc 2 c compact, Cutting length max. 1,600 mm, Saw blade max. D = 315 mm, Cutting height max. 100 mm, (79 mm at 45°), max. cutting width at rip fence 700 mm, Extendable aluminum telescopic angle mitre fence, Motor 4 kW (S6), 400 Volt, 50 Hz, Saw blade speed 3,500 rpm, ex stock Seevetal, without transportation, Bljdpfx Aot Epnlegked Subject to prior sale,

Condition: new, - New-- Cutting plane directly on the sliding carriage- Heavy steel and cast iron construction- Precision-guided format sliding carriagemade of aluminium, anodised as standard- Large table extension on telescopic armguided and longitudinally displaceable- Extendable aluminum telescopic stop,angle-adjustable with professional stop flaps- Rip fence with quick release and fine adjustment- Large work table made of milled gray cast ironremains permanently plan- The standard table extension and table extensionextension make it easy to work with larger onesworkpieces- Quiet running and precise cuts- Equipped with a powerful three-phase motor- The large dimensioned saw aggregateGray iron is doubly fixed to the cast iron table and isa guarantee for stability, precision, smooth running andlong lifetime- Maximum cutting height is also when installedscoring device reachedMade in ItalyEquipment details:Double cradle saw unit- Oversized, made of steel/cast iron- Close to the saw blade, supported on both sidesfor precision, smooth running and a long service life- Adjustable in height and up to 45° using a crank- Maximum cutting height is also when installedscoring device reached- Also available with scoring unittelescopic stop- Extendable telescopic stop up to max. 2550 mm- Angle adjustable- With professional stop flapsAluminum sliding carriage- With a thousand times proven ball contact system- Resistant to dust and dirtminimum point of contact between ball andtrapeze rail- 10-year Holzkraft guarantee against wear and tearguidewaysRip fence with round rod guide- With fine adjustment and quick release- Stable round rod guide made of ground45mm diameter steel- Foldable as standard for cutting large onesworkpiecesTechnical specifications:Dimensions and weightsWeight approx. 385 kgDust extraction connectionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmelectrical dataDrive motor power 5.0 kWConnection voltage 400 VFormat sliding carriage and tableFormat slide length 2600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 840 mmTable width 560 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 2310 mmtrimming length 2600 mmSaw blade inclination 90 - 45 °Max. cutting height 90° 90 mmMax. cutting height 45° 63 mmDiameter (main) saw blade 315 mmSpeed ??of (main) saw blade 4000 rpmPU 1Scope of delivery:Table extension and table wideningAnodized aluminum format sliding carriageAluminum folding stopsRip fence with round rod guide andfine tuningItem No. 5504326 Bljdpfx Aevyupzsgkjd

Condition: new, - NEW -- Cutting plane directly on the saw blade- Large dimensioned cast iron saw unit double on the cast iron tablefastened - guarantee for stability, precision, smooth running and long service life- Precision-guided format sliding carriage made of aluminium, standardanodized- 10-year HOLZKRAFT guarantee on wear and tear on the guideways of thesliding carriage- Rip fence with round rod guide and fine adjustment as standard- Large work table made of milled gray cast iron- Quiet running and precise cuts- Enable standard table widening and table extensioneasy work with larger workpieces- Extendable aluminum telescopic fence with angle adjustment andtwo professional folding stops-Made in ItalyTECHNICAL SPECIFICATIONSDimensions and weightsWeight (net) approx. 295 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mminstallation informationTransport width 700 mmMachine body length 802 mmMachine body width/depth 615 mmSpace required length 3860 mmSpace requirement width/depth 2750 mmExplanation of space requirementsThe dimensions take into account maximum travel distances or usable lengthsWorking area length 1000 mmWorking area width/depth 2000 mmExplanation of work areaPlease add the specified dimensions to the space required to calculate theto obtain the recommended free installation space for the ctrical dataConnection voltage 400 VMains frequency 50 HzDrive motor power 4.0 kWRated operating mode drive motor S 6Duty cycle drive motor 40%Sliding carriage and tableFormat slide length 1600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 1020 mmTable width 325 mmTable height 860 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 1660 mmtrimming length 1600 mmSaw blade inclination 90 - 45°Max. cutting height 90° 100 mmMax. cutting height 45° 79 mmSaw blade diameter 315 mmSaw blade speed 4000 rpmFURNISHINGAnodized aluminum format sliding carriageHandle for sliding carriagetrimming frameSaw rip fence with round rod guideStops Two professional folding stopstrimming shoeeccentric clamptable extensiontable extensionsaw blade guard&nbsp, Bjdpfx Aevyup Uogkeld

Condition: as good as new (ex-display), Year of construction: 2026, ST 3 classic F 23 - Combined sawing-routing machine With tiltable saw blade, tiltable milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast iron table High-precision format sliding carriage made of anodized aluminum (travel 2250 mm) Large extension arm (900 x 600 mm) with telescopic aluminum stop Max. Saw blade Ø 315 mm with scoring device, swiveling from 90°-45°. Saw parallel fence with fine adjustment Stable sawing unit and large dimensioned double cradle frame unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free cast iron 3 milling speeds, manually adjustable from 3.500 - 10.000 min-1 With right-left rotation of the milling spindle Standard arc milling protection hood Two 5.0 kW motors with high power reserves Cast iron milling unit top mounted on both sides precision ball bearings on top close to the lever point four optimally graduated milling speeds, enabling the grinding of workpieces Powerful motors Industrial motor, 100% duty cycle suitable for continuous use (full load) Scope of delivery: Curved fraise protection hood anodized aluminum format sliding carriage aluminum stop jaws folding stop jaws Technical data Dimensions cast iron worktable 1112 x 430 mm working length 2250 mm max. saw blade Ø with/without scoring 315 mm max. cutting height at 90°/45° 100/70 mm max. cutting width 2660 mm Bljdpfxscnwyds Agked saw blade tilting 90° - 45° cutting width 900 mm speed 4000 1/min. table cutter - spindle tilting 90° - 45 useful length of spindle 100 mm max. tool Ø 210 mm max. tenon tool Ø 275 mm max. tool-Ø retractable 180 mm speeds 3.500/7.000/10.000 1/min. General - motor power 400 V/50 Hz/S6 40% 2 x 5,0 kW ( 6,6 PS) Weight 470 kg Suction nozzle-Ø 2 x 120 mm Suction nozzle-Ø saw blade guard 60 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, Combi 4-fold HOLZKRAFT CU 300 Classic F 23 N -- Technical data -- - Circular saw - circumference 2.250 mm max. saw blade Ø 315 mm max. cutting height at 90°/45° 103 / 82 mm max. clearance width left of saw blade 2.310 mm cutting width at rip fence 820 mm saw blade inclination 90° -45° - Dressing - working width 300 mm planing table length 1.510 mm planing shaft Ø / number of planing knives 72 mm / 3 pcs. - Thickness table dimensions 300 x 585 mm min./max. working height 3 / 230 mm max. chip intake 4 mm feed speed 7 m / min -table milling machine - useful length spindle 100 mm max. tenon tool Ø 275 mm max. tool-Ø 210 mm spindle speed 3.500 / 7.000 / 10.000 rpm spindle-Ø 30 mm - general - motor power 400 V / 50 Hz, 3 x 5,0 kW (6,6 PS) Suction nozzle-Ø 4 x 120 mm suction nozzle-Ø saw blade protection 60 mm - Special offer price - Bedpfeci Tvhox Agksld Location: ex stock 54634 Bitburg

Condition: new, HOLZKRAFT sc 2c sliding table saw - Exhibition machine - pivoting, Bodpfeu R Sy Nsx Agkjld rip fence with fine adjustment ----- Technical data ----- Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Speeds: 4,000 rpm, max. saw blade Ø: 315 mm, Cutting width with rip fence: 900 mm, Cutting height 90/45°: 100 / 79 mm, cutting length: 1,600 mm, Swivel range: 90 - 45 °, Dimensions (LxW): 1,020 x 325 mm, Weight: 295 kg - new exhibition machine -

Condition: new, HOLZKRAFT sc 3c 26 sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment Blsdpfju R S Dhsx Agksd ----- Technical data ----- Trimming length: 2,600 mm, max. cutting height 90°: 100 mm, max. cutting width to the left of the saw blade: 2,310 mm, Cutting width with rip fence: 900 mm, max. saw blade Ø: 315 mm, Main saw blade speed: 4,000 rpm, Motor power 400 V: 5.0 kW, Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Table dimensions: 840 x 560 mm, Format sliding carriage dimensions: 270 x 124 x 2,600 mm, Transport width: 900 mm, Weight: 385 kg - new exhibition machine -

Condition: used, Year of construction: 2024, Used machine Year of manufacture: 2022 Commissioning: 8/2024 Bljdpfoxua N Sjx Agkod As-new condition The heavy-duty worktable made of highly ribbed grey cast iron and the base frame made of welded steel ensure high torsional rigidity and vibration-free operation. Smooth-running and precise sliding table made of anodised aluminium with proven, long-lasting ball contact system on hardened guides, 10-year warranty on guideway wear. Grey cast iron saw unit with permanently precise dual pivot segment guidance and zero-point tilt, 6-year Holzkraft warranty on wear of pivot segments. Equipped with a powerful three-phase motor. Saw blade tilt displayed on a scale at the unit. Large outrigger table with roller facilitates panel handling. Angle-adjustable aluminium telescopic fence with two professional folding stops. Folding parallel fence with quick-release and fine adjustment. Standard features include table extension, table widening, and eccentric clamp. Made in Italy Sliding Table and Worktable: Sliding table length: 2600 mm Sliding table width: 360 mm Sliding table height: 142 mm Worktable length: 840 mm Worktable width: 560 mm Worktable height: 900 mm Saw Unit: Cutting width with parallel fence: 900 mm Maximum crosscut width left of saw blade: 3200 mm Ripping length: 2660 mm Saw blade tilting range: 90 - 45° Maximum cutting height at 90°: 100 mm Maximum cutting height at 45°: 70 mm Note on max. cutting height: Independent of scoring unit Saw blade diameter: 315 mm Note on saw blade diameter: Independent of scoring unit Saw blade speed: 3800 rpm Motor: 5.5 kW The hose visible in the picture is not included in the scope of delivery! Availability: Short term Location: Flörsheim

Condition: as good as new (ex-display), Year of construction: 2024, Carriage length: 2300 mm Cutting width at rip fence: 900 mm Cutting width at crosscut fence: 2310 mm Bledpfx Aoxrbh Dsgksd Cutting depth: 100 mm Scorer: no Saw blade swivel range: +45° Saw blade height adjustment: handwheel Saw blade swivel adjustment: handwheel Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut fence display: scale Scorer adjustment: manual Saw blade diameter: 310 mm Speeds: 3500 rpm Motor power: 5 kW Extraction port: 80 and 120 mm Machine length: 3500 mm Machine width: 2200 mm Weight: 380 kg

Condition: new, Year of construction: 2024, New machine Bledpfx Agewb Eh Njksd Year of manufacture 2024

Condition: new, Year of construction: 2026, Holzkraft sliding table saw with scoring device Cut-size circular saw with tiltable saw blade and high-quality sliding table made of anodized aluminum Cutting plane of the small-format circular saw directly on the roller table Precision-guided sliding table made of anodized aluminum, standard finish Large table arm guided on telescopic arm and longitudinally adjustable The standard table widening and table extension allow easy working with larger workpieces The large dimensioned sawing unit made of cast iron is double mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground cast iron, therefore extremely robust and insensitive smooth running and precise cuts Aluminum sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail 10 years HOLZKRAFT warranty on wear of hardened guideways Telescopic stop Extendable aluminum telescopic stop Angle adjustable With two professional folding fences Ek2a0i2ik Rip fence Standard with fine adjustment and quick clamping Scope of delivery: Table extension Table extension Anodized aluminum format sliding carriage Rip fence with round bar guide and fine adjustment Model SC 2 classic Article no. 5504215 Technical data table dimensions 1020 x 325 mm table height 900 mm trim length 1660 mm cutting height max. 90° with scoring 100 mm cutting height max. 45° with scoring 79 mm max. clearance width to the left of the saw blade 1270 mm Cutting width with rip fence 900 mm saw blade inclination 90° - 45 saw blade Ø max. with scoring 315 mm saw blade Ø max. without scoring 315 mm Blodpfeih Dwvsx Agkjd scoring saw blade Ø (option) 80 mm Main saw blade speed 4000 min-1 Speed scoring saw blade 7600 min-1 Electrical connection 400 V / 50 Hz motor power 4,0 kW Suction nozzle diameter 120 mm Suction nozzle Ø saw blade guard 60 mm Weight 295 kg Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2015, Stationary spindle moulder Table size: 1945 x 575 mm Max. spindle projection above table: 130 mm Usable spindle length: 100 mm Max. retractable tool diameter: 180 mm Spindle arbor diameter: 30 mm Spindle speeds: 3,500/7,000/10,000 rpm Motor power: 5 kW Weight: approx. 240 kg Extraction port diameter: 2x 120 mm Location: Nattheim Bedpfx Ageyapvtekold

Condition: new, The work table made of heavily ribbed gray cast iron andguarantee the base made of welded steelTorsion resistance and vibration-free workingHigh quality machine at a real entry-level priceUnique in this performance class:- Format sliding carriage made of anodized aluminum for the highestcutting precision- Cutting plane directly on the saw blade- Swiveling saw blade unit from 90 - 45 °- Table bracket with aluminum crosscut fence and adjustableStop flap for plates and large workpieces- Rip fence with round bar guide and fine adjustment- Powerful engine- Made in EuropeDimensions and weightsWeight (net) approx. 170kgDust extraction connectionExtraction nozzle diameter 120mmExhaust nozzle diameter saw blade protection 60mmTransport width 680 mmWorking area 1600 mm x 2300 mmSpace requirement 2613.5 mm x 2134 mmPlease add the specified dimensions with the space required to obtain the recommended free space for the dimensions take into account maximum travels or usable lengthsElectrical data400 V supply voltageDrive motor 1.8 kWPhase (s) 3 PhNominal operating mode drive motor S6Current type ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat sliding table 1140 mm x 200 mm x 70 mmTable 1024 mm x 224 mm x 900 mmsaw unitCutting width with rip fence 700 mmMax. Cutting height 90 ° 67mmMax. Cutting width to the left of the saw blade 1200 mmMax. Cutting height 45 ° 40mmEdging length 1200 mmSaw blade diameter 250mmSaw blade inclination 90 - 45 °Saw blade speed 3900min¯¹scope of deliverytable extensionAnodized aluminum sliding tableRip fence with round bar guide and fine adjustmentAluminum folding stopEccentricItem No. 5504113 Bedpfxevxr S Rj Agksld

Condition: new, Year of construction: 2025, FS 41 classic Tersa - Thicknessing planer with TERSA quick-change system for planing knives With TERSA cutterblock for changing planing knives in seconds TERSA planing knife system enables particularly quiet running Skew toothed steel infeed roller for constant and uniform wood infeed The extra long dressing tables made of one piece allow easy dressing of the workpieces Bledscnxayopfx Agksd Large dressing fence can remain in position when opening the dressing tables Rear opening dressing tables The high machine weight ensures highest precision and smooth running Powerful industrial motor Robust steel/cast iron construction Model FS 41 Classic Tersa Article-No. 5503414 Technical data ---Technical data dressing tables--- Total length of the tables 1800 mm Feeding table length 920 mm table height 870 mm working width 410 mm max. chip removal 4 mm ---Technical data thickness--- dimensions thickness table 605 x 420 mm min./max. working height 3 / 230 mm feed speed 7 m/min. planing shaft-Ø / planing knives 72 mm / 3 pcs. speed 5200 1/min motor 400V/50Hz/S6 40% 5,0 kW (6,6 PS) Suction nozzle diameter 2 x 120 mm Weight 270 kg Tersa planing cutter No more adjusting and screwing Change of planing knives in seconds Self-locking Especially low noise Planing mills solid backstops prevent the backstroke of workpieces 3-blade shaft Tersa for optimal planing pattern The wood infeed helical toothed steel infeed rollers for an

Condition: as good as new (ex-display), Year of construction: 2025, Planer-thicknesser Holzkraft FS 30 Classic Tersa with Tersa cutterblock and planing knives - quick change system Tersa planing knife system enables knife change in seconds and particularly quiet operation Blodpsbuldyofx Agkod Skew toothed steel infeed roller for constant and uniform wood infeed Extra long planing tables Large dressing fence can remain in position when opening the dressing tables. Rear opening dressing tables High machine weight Powerful industrial motor Robust cast steel construction Total length of the tables: 1510 mm Feed table length / table height: 740 mm / 850 mm working width: 300 mm max. chip removal: 4 mm dimensions thicknessing table: 565 * 300 mm min./max. working height: 3/230 mm feed speed: 7m/min planer shaft diameter / planer knives: 72mm / 3 pcs. speed: 5200 rpm motor 400V/50Hz/S6 - 40%: 4,0kw (5,5PS) Suction nozzle diameter: 2 * 120 mm Scope of delivery: Tersa planer cutterhead Anodized planing fence Available ex stock Bitburg - immediately available-

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: AB00021322, total width: 1,820 mm, total height: 1,960 mm, total length: 1,650 mm, working width: 1,100 mm, overall weight: 1,160 kg, power: 11 kW (14.96 HP), grinding belt length: 1,900 mm, workpiece height (max.): 170 mm, grinding belt width: 1,115 mm, input voltage: 400 V, - The calibrating and fine sanding machine LIBRA 35 is an extremely versatile machine suitable for a wide range of applications. - Robust, tube-reinforced monoblock steel frame with high-mounted working units for maximum rigidity. - User-friendly due to a clearly arranged control panel on the front side. - Motorized table height adjustment. - Digital display for working height. Bsdpjwwkuysfx Agkjld - Electronically controlled sanding belt oscillation with reduced compressed air requirement. - Automatic star-delta start-up for the main motor. - Natural rubber feed belt with negative profile. - Feed table with two rollers at the infeed and outfeed of the feed belt. - Belt feed driven by geared motor with two speeds. - Flexible steel pressure bar before the first unit. - Rubber pressure rollers before and after each working unit. - Pneumatic belt tensioning per unit with decimal correction option for grit/band thickness.

Year of construction: 2023, condition: new, Rollers: 3 Roll width: 60mm Roll diameter: 120mm Spring travel: 20mm Speeds: 2 / 4 / 5,5 / 6,5 / 11 / 13 / 16,5 / 33m/min Tripod throat: 1050 Blodolikf Sopfx Agkod Motor power: 0,75kW

Condition: new, Year of construction: 2025, Cutting length: 4100mm Cutting height: 2200mm Cutting depth: 60mm Scorer: yes Feed: manual Display horizontal cut: digital Display vertical cut: digital Saw blade diameter: 300mm Evasive material support: yes Saw blade speed: approx. 4000 rpm Engine power: 4 kW Machine length: 5300mm Machine depth: 1800mm Machine height: 3100mm Bodpfx Agjhpma Noksld Weight: 800kg

Condition: new, Year of construction: 2025, Suction port diameter: 1 x 200, 3 x 100mm Nominal volume flow: 1760 m³/h Bledjhpmawopfx Agksd Residual dust content: 0.1 mg/m³ Chip collection volume: 240l Filter cleaning: motorized motor power: 3 kW Noise level: 78dB(A) Machine length: 1340 mm Machine width: 900 mm Machine height: 2170 mm Weight: 178 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Format Circular Saw FKS 550-3200 M A PRO - Year of manufacture: 2023 - Max. cutting height: 200 mm Bsdpsxfku Tofx Agksld - Cutting height: 200/140 mm - Crosscut width left of the saw blade: max. 3200 mm - Cutting width with parallel fence: 1450 mm - Saw blade tilting: 90 – 45° - Dimensions (LxWxH in mm): 3,386 x 3,703 x 1,330 - Main saw blade with belt drive and speeds: 2800/3665/4800 rpm - Vibration-free operation due to high dead weight (1,070 kg) - Large support table with material roller - Parallel fence with round bar guide - Extendable aluminium rip fence with digital display (2 folding stops) - Quadruple ball-bearing format sliding table with twin roller carriage made of anodised aluminium, high torsional stiffness - Large pendulum safety guard with gas pressure spring - Multiple locking positions on sliding table - Motorised saw blade tilt & height adjustment with digital display - 8.8 kW main motor - Tool-free rapid system for saw blade clamping - Saw unit can be switched on and off - On/off switch on the sliding carriage - Edging length: 3200 mm

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Specifications and technical data: - Casadei Libra 10/95 TC machine with V2 promotional equipment package - Working width: 950 mm - Suitable for smaller craft businesses for occasional use - Combination sanding unit with sanding pad for fine sanding - Standard with angled-grooved steel roller Ø 120 mm for calibration - Fine adjustment of working height - Clearly arranged control panel on the front - Robust, tube-reinforced monoblock steel machine body, robot-welded, with high-mounted working units for maximum rigidity - Motorized height adjustment of the work table with digital display - Electronically controlled sanding belt oscillation - Conveyor feed via gear motor with two speeds - Natural rubber feed belt with negative profile - Flexible steel pressure bar in front of the first unit - Rubber pressure rollers in front of and behind every working unit - Pneumatic belt tensioning for each unit, with decimal correction option for grit/belt thickness - Universally applicable for solid wood and veneer thanks to combination unit - Entry-level model for smaller companies - Combination unit for calibration and sanding: - Angled-grooved steel roller Ø 120 mm with fine height adjustment - Hard sanding pad with graphite backing - Universal version for calibration and sanding of solid wood, particleboard, and veneer - Switching the sanding pad on and off from the control panel - Switching the roller on and off from the control panel - Electronic control "FOX 500 KTR" Blsdpfx Agox Hbr Iokjd - Table extension with 2 rollers at infeed and outfeed - Automatic table positioning with push button - Sanding belt length: 1525 mm - Sanding belt width: 970 mm - Max. working width: 950 mm - Feed speed: 4.5/9 m/min - Workpiece height: 4 - 170 mm - Motor: 7.5 kW - Extraction port: 140 mm Dimensions: 1388 x 1545 x 1668 mm Weight: 600 kg Availability: short term Location: Röllbach

Condition: used, Year of construction: 2022, Used machine Blodpox Hbrusfx Agksd Year of manufacture: 2022 Features and technical data: - Heavy-duty professional panel saw - With scoring unit; adjustable from outside, with separate drive motor - Sliding table made from anodized aluminum with proven, permanently smooth-running ball contact system on hardened guide rails (10-year manufacturer's warranty from date of initial commissioning) - Saw rip fence with round bar guide; foldable for large panels, with quick clamping and integrated fine adjustment - Table extension - Table widening - Integrated on/off switch on the sliding table - Motorized height and tilt adjustment of the saw unit, digital display for tilt angle - Programmed control of saw blade height, tilt, and the position of the rip fence - Swiveling operator panel at eye level - Quality Made in Italy - Crosscut length: 3200 mm - Cutting height 90°/45° with scorer max.: 136.5/97 mm - Crosscut width left of saw blade max.: 3260 mm - Cutting width with rip fence: 1270 mm - Saw blade tilt: 90 - 45° - Saw blade diameter with scorer max.: 400 mm - Scoring blade diameter: 120 mm - Main saw blade speed: 3500/5000 rpm - Scoring blade speed: 9200 rpm - Sliding table dimensions: 360 x 142 x 3200 mm - Extraction ports: 120 + 80 mm - Motor power: 7.0 kW, 400 V - Scoring unit motor power: 0.55 kW Dimensions: approx. 3200 x 950 mm Weight: approx. 745 kg Availability: short-term Location: Röllbach

Condition: good (used), Year of construction: 2020, functionality: fully functional, Length approx. 2250 mm, width/depth approx. 1370 mm Weight approx. 695 kg, Jointer: Maximum chip removal 5 mm Extraction connection: Extraction nozzle Ø120 mm Thickness planer: Working height min. 3 mm Bjdpfsykaqcsx Agkeld Working height max. 240 mm Minimum workpiece length 220 mm Maximum chip removal 5 mm Drive motor power 7 kW Connection voltage 400 V Mains frequency 50 Hz Planer shaft type TERSA 4 planer knives Speed 5000 rpm Maximum planing width 520 mm Feed: Feed speeds 5/8/12/18 m/min Very good condition Available around September 2026 Shipping possible at extra cost!