Used Holzkraft Sc 2 Classic for sale (165)

Condition: new, - new -Description:- Vertical design for splittingshort and meter logs- Robust and solid construction- Impact and scratch-resistant thanks to high-qualitypowder coating- Quick, tool-free splitting height adjustment- Low base plate for easy,{loading of large logs- Phase inverter on all 400 V models- Convenient transportation with manual drawbarthanks to standard chassis with largepneumatic wheels and additional support wheel- Space-saving storage thanks to easylowerable cylinder- Powerful industrial hydraulic system- Two-hand safety circuit- With splitting material holderTechnical data:Dimensions and weightsLength approx. 1050 mmWidth/depth approx. 1700 mmHeight approx. 2500 mmWeight approx. 282 kgDrivePTO speed 540 min¯¹Device dataSplitting force max. 23.4 tSplitting length min. 560 mmSplitting length max. 1100 mmSplitting material diameter min. 80 mmSplitting material diameter max. 350 mmHydraulic systemTank capacity hydraulic oil 24 . 5981023 Tsdpfxsvxr Ryj Aired

Condition: new, - NEW -description- Stable cast steel construction- Milling spindle can be swiveled backwards from 0 ° to -45 °- Three spindle speeds from 3500 - 10000 rpm- As standard with right-left rotation of the milling spindle- Large-sized milling unit made of gray cast iron,attached directly to the table- Solid and precise gray cast iron table- Quick and easy speed change- Powerful 5.0 kW industrial motor- Standard curved milling protection hoodEquipment detailsAluminum sliding carriage- Equipped with a thousand times tried and testedBall contact system- torsion-resistant, extremely precise, smooth-running andproblem-free in daily use- 10 year Holzkraft guarantee on wear and tearof the guidewaysGray cast iron milling unit- Attached directly to the router table- Milling spindle mounted high up with precision ball bearings,thus the lowest possible bearing loadand the longest possible service life- 3 milling speeds from 3500 to 10000 rpmPowerful engines- Equipped with a powerful three-phase motorMilling protection- The milling protection is standard for maximum safetywith a height-adjustable guide railand ling stop- Exact milling stop with a quick adjustmentand a fine adjustment with a scale on the stop jaw- The integrated suction connection ensures a clear viewRouter table opening- A large router table opening also enablesthe use of larger flattening cuttersand tenoning and slotting toolsabove and below the tableArc milling protection hood- Included as standard in the scope of deliveryReversible stop jaws- Versatile integrated stop for bridgingthe tool gap- Allows you to work safely withnarrow workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 290 kgConnection suctionExtraction nozzle diameter 2 x 120 mmWork tableWorking table length 1000 mmSlide length 1000 mmWorking table width 435 mmSlide carriage width 270 mmTable height 900 mmInstallation informationRequired space length 1945 mmMachine body width / depth 710 mmRequired space width / depth 2220 mmWorking area length 1600 mmExplanation of space requirementsThe dimensions take into account maximum travels or useful king area width / depth 1600 mmMachine body length 1000 mmExplanation of the work areaPlease add the specified dimensions with the space required in order to obtain the free installation area recommended for the ctrical dataConnection voltage 400 VMains frequency 50 HzPhase (s) 3 PhDrive motor power 5.0 kWType of current ACMilling spindleSpindle inclination 0 to -45 °Spindle speed (s) 3500/7000/10000 min¯¹Usable length of the spindle 100 mmSpindle mandrel diameter 30 mmSpindle overhang r table 130 mmMilling tool diameter l diameter can be lowered 180 mmTool diameter max. Tenon milling 275 mmTool diameter file milling 210 mmscope of deliveryArc milling protection hoodAnodized aluminum sliding carriageTelescopic miter fenceAluminum stop jawsItem No. 5502045 Todpfxjvwf Ucj Airjd

Condition: used, Year of construction: 2023, Used Machine Year of Manufacture: 2023 Condition: Like new; only a few drill holes have been made Features and Technical Specifications: - Spindle speed: 3,000 rpm - Drilling width: 240 mm - Max. drilling depth at 90°: 180 mm - Drill head height adjustment: 160 mm Tsdpfxszk Ni Te Airsd - Tool clamping range: 0–20 mm - Work table rotation: ±60° - Work table length: 565 mm - Work table width: 315 mm - Exhaust port diameter: 90 mm - Output power: 2.2 kW - Supply voltage: 400 V - Power frequency: 50 Hz Dimensions: 1,290 × 980 × 1,270 mm Weight: 260 kg Availability: Available shortly Location: Röllbach

Condition: new, Year of construction: 2025, Designed for professional structuring and sanding operations Motorized height adjustment of the working units with digital display Units can be switched on individually Highly durable, rubberized conveyor belt Infinitely variable feed rate Infeed height remains constant Models str l with infinitely adjustable, inverter-controlled brush speed: this enables precise adjustment of the speed to the workpiece material, making it particularly suitable for sensitive materials. Unit for saw-cut appearance available as an option Dimensions and weights Tedpfx Aioff Hdiorjd Length approx. 1300 mm Width/Depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Dust extraction connection Extraction nozzle diameter 2 x 150 mm Brushes Diameter 190 mm Length 300 mm Rotation 1500 min⁻¹ Electrical data Power of drive motor 2 x 3.0 kW Power of feed motor 0.22 kW Power consumption 6.25 kW Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Noise emission Sound power level Lw (idle without extraction) 65 dB(A) Sanding unit Sanding width max. 300 mm Feed unit Feed speed 1 – 13 m/min Workpiece Height max. 300 mm Weight max. 100 kg

Condition: used, Year of construction: 2023, New exhibition machine! List price €11,950 net • Equipped with a TERSA cutterhead for ultra-fast cutter blade changes • The TERSA cutterhead system enables particularly quiet operation • Helically toothed steel feed roller for consistent and uniform material feed • Material feed with two speeds via a separate motor • The particularly long planing tables facilitate easy and precise adjustment of the workpieces • Work tables are made of cast iron, annealed and stress-free, making them durable and permanently flat • Planing tables that open simultaneously towards the rear for short setup times • Planing table adjustment via handwheel with numerical display for planing height • The high machine weight ensures maximum precision and smooth operation • Powerful industrial motor • Robust steel/cast iron construction • Material removal starting from 0.2 mm (with a minimum workpiece thickness of 3 mm) thanks to the helically toothed feed roller (ideal for economical planing of hardwood) • Quality - Made in Europe Equipment details: Tersa cutterhead • No more adjusting and screwing required • Cutter blade changes in seconds • Self-locking • Particularly quiet operation The material feed • Helically toothed steel feed rollers for a consistent and uniform wood feed without leaving marks • Several teeth engage simultaneously for powerful feed • Wear-free compared to rubber feed rollers Fixed dust extraction hood • Thanks to the fixed dust extraction hood, there is no need to change the dust extraction hose when retooling • This saves valuable working time Simultaneous opening of the planing tables • Simultaneous tilting of the planing tables with spring support for quick and convenient adjustment for thickness planing in seconds Thickness table adjustment • FS 41 elite s with thickness table adjustment via handwheel with integrated display • The thickness table is mounted on four large-sized spindles, which ensure maximum stability under all working conditions. • Thanks to the special lifting device, the table position remains perfectly maintained even without locking. Anti-recoil guards • Massive anti-recoil guards prevent workpieces from recoiling • The 4-cutterhead ensures an optimal planing result Anodized aluminum planing fence • Large-sized (1200 x 150 mm) • Easy to move • Adjustable from 90° to 45° via a scale • Supplied as standard with an auxiliary fence for safe planing of even narrow workpieces Technical description - Planer Overall length of the tables 2200 mm - Planer Working width 410 mm - Planer Material removal max. 5 mm - Planer Dimensions of the planing fence 1200 x 150 mm - Thickness Dimensions of the thickness table 775 x 410 mm - Thickness Working height min. 3 mm - Thickness Working height max. 240 mm - Thickness Feed speeds 6 / 12 m/min - Cutterhead speed 5000 1/min - Cutterhead diameter 95 mm - Number of cutter blades 4 pcs. - Electrical connection 400V / 50Hz - Motor power 5.0 kW - Dimensions (L x W) 2250 x 1440 mm - Dust extraction port diameter 1 x 120 mm - Weight 450 kg Storage location: Rieth Tedpfxez Ebprs Airjd

Condition: new, Year of construction: 2026, Holzkraft bandsaw HBS 533 S. Heavy-duty professional model with high weight for maximum smooth operation. Particularly quiet and precise operation thanks to a torsion-resistant machine housing. Large, one-piece cast iron saw table, swiveling from 0° to +20° with a ground and polished surface. Patented table tilting mechanism with handwheel and rack and pinion. Saw blade quick-release tensioning system. Ceramic saw blade guide rollers. Large cast iron parallel fence. Fast and precise adjustment of cutting height via handwheel and rack and pinion with millimeter scale. Safety switch for automatic shutdown when the door is opened. Large cast iron parallel fence. Comes standard with a miter gauge. Flywheels made of cast iron with a special coating on the running surfaces. Inspection window for checking the saw blade run. Tsdpfx Aijb S Uzkjrjd Professional saw table guide. The heavy, solid cast iron saw table is easily and conveniently adjusted via a handwheel and rack and pinion guide. The tilt is continuously adjustable from 0° to +20°. Patented. Work table dimensions: 750 x 530 mm Cutting speeds: 1400 m/min. Flywheel diameter: 530 mm Max. cutting height: 350 mm Max. cutting width with fence: 465 mm Max. cutting width without fence: 510 mm Bandsaw blade length: 4190 mm Precision guide: top / bottom Saw table tilt: 0° - +45° Motor power 400 V/50 Hz/P2: 4.0 kW Weight: 305 kg Dimensions: 1000 x 720 x 2040 Dust extraction port diameter: 2 x 100 mm Location: In stock, Bitburg.

Year of construction: 2026, condition: as good as new (ex-display), Professional-grade woodworking vises Precise and meticulous workmanship Made entirely of dampened, solid beech wood All important edges are rounded Surfaces are treated with environmentally friendly oil Standard equipment includes a tool drawer The two cylinder rods of the clamping jaws are precisely and securely guided within a cast part Equipped with a smooth-running trapezoidal thread spindle With a French front clamp and a German rear clamp with linear guide, two short round bar hooks, two long round bar hooks, a drawer, and an accessory drawer Finger zinc coating on the rear clamp and accessory drawer back Length of working surface without clamps: 1915 mm Width/depth of working surface without clamps: 615 mm Working height: 870 mm Length of front clamp: 520 mm Length of rear clamp: 450 mm Width of front clamp: 70 mm Width of rear clamp: 140 mm Clamping range of front clamp: 190 mm Clamping range of rear clamp: 180 mm Clamping range of front clamp to the center of the round hook: 225 mm Clamping range of rear clamp to the center of the round hook: 265 mm Plate thickness: 50 mm Length (product): 2120 mm Width/depth (product): 790 mm Height (product): 870 mm Weight (net): 91 kg Tsdpfjc Uydasx Aired Location: In stock at warehouse 54634 Bitburg

Condition: new, Year of construction: 2025, 4-knife cutterhead for optimal planing results Smooth operation thanks to precision drive unit and heavy cast iron construction Front steel infeed roller with helical teeth for optimal feed rate Satin-finished steel outfeed roller, optionally with rubber roller on the outfeed side The worktable is mounted on four large columns, ensuring maximum stability under all operating conditions. Thickness table adjustment is carried out via a handwheel with a numerical display for the set planing height (accurate to 1/10 mm) Standard equipment includes two feed speeds, conveniently selectable from the operator's front Powerful industrial motor Stable steel/cast iron construction Equipment details: Worktable Mounted on four large spindles, ensuring maximum stability under all operating conditions A special lifting device ensures that the table position is maintained perfectly, even without locking Tsdjd Hx Hpspfx Airjd TERSA planing cutterhead No more adjustment and screwing required Planer knife changes in seconds Self-locking Motorized thickness table height adjustment in S 52 elite s Motorized height adjustment of the thickness table with electronic decimal display For greater precision and user-friendliness Dimensions and weights Length approx. 1080 mm Width/Depth approx. 1440 mm Weight approx. 455 kg Dust extraction connection Dust extraction nozzle diameter (thicknessing) 120 mm Drive power Main motor 7 kW Installation information Space required (length) 1440 mm Space required (width/depth) 1071 mm Space required (height) 1088 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1030 mm Machine body width/depth 998 mm Length 1000 mm Width 1800 mm Explanation of work area: Please add the specified dimensions to the space required to obtain the recommended free installation area for the machine. Thicknessing Thickness table length 520 mm Thickness table width 850 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Planer cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: new, Bandsaw HOLZKRAFT HBS 433 - Exhibition machine - Saw blade guide top, Saw blade guide at bottom, Quick clamping device via eccentric lever ----- Technical data ----- Rollers Ø: 430 mm, max. cutting height: 270 mm, max. cutting width with fence: 370 mm, max. cutting width without stop: 410 mm, max. belt length: 3,345 mm, Table size: 610 x 431 mm, Table inclination: -10 - +45 °, Motor 400 V: 1.5 kW, suction nozzle Ø: 2 x 120 mm, Cutting speed: 900 / 450 m/min, Dimensions (LxWxH): 768 x 512 x 2,048 mm, Weight: 130 kg Scope of delivery: 3 band saw blades 6 / 16 / 25 mm Tedpfxou R S Ako Airod - new exhibition machine -

Condition: new, Year of construction: 2026, LAB 300 PLUS F 16 TERSA - Universal combination machine with aluminum sliding table and three milling speeds for sawing, milling, planing/thicknessing, and optional mortising torsion-resistant steel cast iron construction machine table made of cast iron, hardened and ground easy-running, anodized aluminum sliding table, 10-year warranty on wear of guide rails large fence system with extendable aluminum telescope fence and folding stops with combination saw fence with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, pivotable from 90°-45° Tsdpfx Aecnxa Neirod helical steel feed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit Scope of delivery: Combination fence/parallel fence Arc milling guard Tersa cutterhead Anodized aluminum sliding table Aluminum fence cheeks Folding stops Eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Item No. 5500314 Technical data ---Technical data circular saw--- Fence length 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. ripping width to the left of the saw blade 1660 mm Cutting width on the parallel fence 800 mm Saw arbor speed 3500 rpm Saw blade inclination 90° - 45° ---Technical data planer--- Working width 300 mm Planer table length 1260 mm Cutterhead speed Cutterhead diameter / number of planer knives 72 mm / 3 pcs ---Technical data thicknesser--- Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm Feed rate 7 m/min ---Technical data table saw--- Usable spindle length 100 mm max. tool diameter 180 mm, can be recessed max. tenon tool diameter 275 mm max. tool diameter, can be recessed 140 mm Spindle speed 3500/600/800 rpm Spindle diameter 30 mm Motor power 400 V / 50 Hz / S6 - 40% 4 kW (5.5 hp) S6 40% Weight 430 kg Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Sliding table with ball bearing system equipped with a proven ball bearing system permanently easy-running thanks to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and the trapezoidal rail 10-year HolzKraft warranty on wear of the carbide guide rails Dust extraction hose connection The dust extraction ports of the planer (1) and thicknesser (2) point in the same direction. The dust extraction hose can therefore be connected to the machine from the same side for both types of planing. You do not need a hose that goes around the machine. Planing units helical steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent the workpiece from kicking back 3-knife cutterhead ensures an optimal planing result

Condition: like new (used), Year of construction: 2018, machine/vehicle number: DC-2075, Work table 700 x 300 mm, Drilling width 240 mm, Drilling depth 150 mm, Max. travel 230 mm, Drill head height adjustment 160 mm, Drill head swivel 45°-0°-45°, Wescott drill chuck 0 - 20 mm, Speed 3,000 rpm, Todpfx Aovl Eynsirsd Motor 2.2 kW, 400 volts, 50 Hz, Weight approx. 345 kg, Ex works, from the Seevetal location, excluding transport, as inspected, subject to prior sale.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, operating hours: 5 h, power: 5 kW (6.80 HP), input voltage: 400 V, pivoting range: 45 °, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,500 rpm, table width: 530 mm, table length: 1,200 mm, overall weight: 510 kg, tool diameter: 240 mm, Equipment: CE marking, Professional woodworking machine with tilting milling spindle and cantilever arm. Exhibition machine like new - used only for demonstration purposes Milling unit made from cast iron, tiltable up to -45° backwards Four milling speeds from 3500 to 10000 rpm Forward and reverse rotation Height and tilt display accurate to 0.1 mm Quick speed change via eccentric clamping Powerful 5.0 kW industrial motor Curved milling hood included Made in Italy Milling spindle tilt 0 – -45° Usable spindle length 125 mm Spindle speeds 3500/6000/8000/10000 rpm Speed indication via LED display on the front panel Spindle shaft diameter 30 mm Max. tool diameter 240 mm Max. retractable tool diameter 230 mm Max. tenoning tool diameter 320 mm Accessories included: Mitre fence with two flip stops Eccentric clamp Curved milling safety guard Additionally, adjustable system fence jaws Tjdpoyn Ny Usfx Airod The machine can be inspected and tested at any time at the Chemnitz location.

Condition: good (used), Year of construction: 2016, Wheel diameter 470 mm Cutting height 265 mm cutting width 390/465 mm Motor output 1,6 kW Table dimensions 535/485 mm Table tiltable 45 Grad Todpfxsz Hd Sle Aired Dimensions (L/W/H) 800/490/2000 mm machine weight ab. 157 kg

Condition: new, Year of construction: 2025, Designed for professional structuring and grinding operations Motorized height adjustment of the working units with digital display Units can be switched on individually Highly durable, rubberized conveyor belt Continuously variable feed rate Infeed height remains constant Models str l with continuously adjustable, inverter-controlled brush speed: this enables precise adjustment of the speed to the workpiece material, making it particularly suitable for sensitive materials. Unit for saw-cut appearance available as an option Motorized height adjustment of the units Units can be switched on individually Feed rate continuously adjustable Dimensions and weights Length approx. 1300 mm Width/Depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Dust extraction connection Extraction nozzle diameter 2 x 150 mm Brushes Diameter 190 mm Length 300 mm Rotation 1500 min⁻¹ Electrical data Power of drive motor 2 x 3.0 kW Power of feed motor 0.22 kW Power consumption 6.25 kW Connection voltage 400 V Phase(s) 3 phases Type of current AC Tedsff Hdgopfx Aired Mains frequency 50 Hz Noise emission Sound power level Lw (idle, without extraction) 65 dB(A) Grinding unit Grinding width max. 300 mm Feed unit Feed speed 1 – 13 m/min Workpiece Height max. 300 mm Weight max. 100 kg

Condition: used, Year of construction: 2023, Used Machine Year of manufacture: 2023 Condition: like new; machine has never been used Features and technical specifications: - Spindle speeds: 3,500 / 6,000 / 8,000 / 10,000 rpm - Milling spindle tilt: 0 to -45° - Effective spindle length: 125 mm - Spindle arbor diameter: 30 mm - Speed display: LED display on the front of the machine - Max. tool diameter (standard): 240 mm - Max. lowerable tool diameter: 230 mm - Max. tool diameter for profile milling: 240 mm - Max. tool diameter for tenon milling: 320 mm - Work table length: 1,200 mm - Work table width: 530 mm - Table height: 900 mm - Slide length: 1,200 mm - Slide width: 360 mm - Slide height: 142 mm Todpfozk Nn Aox Aired - Exhaust port diameter: 2 × 120 mm - Drive motor power: 5.0 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Dimensions: 1,200 × 2,000 mm Weight: 510 kg Availability: available shortly Storage location: 63934 Röllbach

Condition: new, Year of construction: 2026, The robust design also allows for the processing of longer workpieces. The grinding unit can be swivelled, making it suitable for use as an edge grinding machine. Large, balanced belt pulleys (225 mm) ensure low-vibration operation. Simple adjustment of the grinding belt. High belt speed of 17 m/s. Reversible rotation (right/left). Upper grinding platen with graphite coating. Grinding shoe with 4-point suspension. Equipped with a movable grinding shoe for grinding angled surfaces. Smooth-running work table, even under heavy loads from large workpieces. Optimal price-performance ratio. Additional ESE equipment: Standard with electric table height adjustment. Split table that can be folded out for special edge grinding applications. Todpjff Hdfjfx Airsd Drawer-type grinding attachment. Integrated work table lighting. Equipment details: Large, balanced belt pulleys (225 mm) ensure optimal and low-vibration operation. Belt speed: 17 m/s. Equipped with a swivelled professional grinding shoe for grinding angled surfaces. 4-point suspension. Standard with electric table height adjustment. Controls ergonomically arranged on a separate control panel. Standard with drawer-type grinding attachment. Split table that can be folded out for special edge grinding applications. Dimensions and weights: Length approx. 3750 mm Width/Depth approx. 1250 mm Height approx. 1730 mm Weight approx. 520 kg Dust extraction connection. Dust extraction port diameter: 160 / 160 mm Work table(s): Work table height adjustment: 550 mm Work table traverse: 690 mm Electrical data: Power of height adjustment motor: 0.37 kW Power of drive motor: 3.0 kW Connection voltage: 400 V Phase(s): 3 phases Type of current: AC Mains frequency: 50 Hz Grinding unit: Grinding belt length: 7000 mm Grinding belt width: 150 mm Belt speed(s): 17 m/s Grinding shoe length: 270 mm Grinding shoe width: 150 mm

Year of construction: 2022, condition: used, Used Equipment Year of Manufacture: 2022 Features and Technical Specifications: - Allows one person to effortlessly load panels onto the platform frame and swivel it from the vertical to the horizontal position - For use with format or panel cutting saws, on a shelf, or while moving between stations Tsdpfx Ajzk Nqdoirod - Swivel frame with two-position locking mechanism in vertical and horizontal positions - Table height can be adjusted to the desired working height using a foot-operated hydraulic system - Design featuring a smooth-operating scissor mechanism ensures that the platform can be raised and lowered absolutely parallel - Sturdy support rollers on the lower support and multiple all-directional casters ensure smooth, ergonomic operation - Counterweight on the lower frame for secure footing and maximum stability when moving the table - Unrestricted access to the workstation table’s control pedal - Easy to maneuver thanks to four swivel casters with a diameter of 125 mm - Two casters are equipped with brakes - The swivel frame can be mounted on and removed from the platform base frame in just a few simple steps - Meets the safety criteria of EN 1570-1 - Load capacity: 300 kg - Maximum table height: 1010 mm - Minimum table height: 400 mm - Swivel frame width: 1800 mm; length: 1500 mm - Casters: 125 mm in diameter Dimensions: 1,200 x 740 x 400 mm Weight: approx. 80 kg Swivel frame weight: 10 kg Availability: available shortly Storage location: 63934 Röllbach

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 203 With standard chassis Dimensions and weights Chip collection volume 175 l Nominal outer diameter of extraction nozzle inlet 200 mm Length approx. 1061 mm Width/depth approx. 577 mm Height approx. 2300 mm Weight approx. 60 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Filter Filter area 2.2 m² Noise emission Sound pressure level max. 84 dB(A) Volume flow Nominal volume flow 2500 m³/h For milling, planing and sawing chips (no dust) Significantly reduced dust content thanks to BIA-tested filter material with a high separation rate Housing parts and impellers made of high-strength special plastic Quick-release fasteners for filters and chip bags for trouble-free maintenance Robust, high-quality design Easy to move thanks to swivel casters Low power consumption Extraction units comply with dust class L Scope of delivery: Unit body with mounted fan unit Filter bag / extraction unit Chip bag / extraction unit Todpfx Aijhk S Szerjd without extraction hose

Condition: new, Year of construction: 2025, Pre-milling unit: yes Pre-milling unit material removal: 0 - 2 mm plastic edges: 0,4 - 3 mm solid wood edges: 0,5 - 5 mm Workpiece thickness: 8 - 50 mm Minimum length of workpiece: 120 mm Min. work piece width: 110 mm Anti-adhesive spraying unit: yes Edge preheating device: yes / with ceramic infrared lamp Bonding unit: granulat / Glue container quick-change kit Jack knife: yes Flush trimming unit: yes Corner copy unit: yes Flush radius milling unit: yes Radius scraper unit: yes Area scraper unit: yes Tsdpfx Aol D Rx Ueirod Buffing unit: yes Cleaning spray unit: yes motor power: 5 kW machine length: 3774mm machine width: 1546 mm machine height: 1337mm weight: 842 kg

Condition: used, Year of construction: 2018, Load capacity 350 kg, table height min. 757 mm, table height max. 1157 mm, table length 3000 mm, table width 1000 mm, length approx. 3010 mm, width/depth approx. 1040 mm, height approx. 1157 mm, recommended extraction capacity 2200 m³/h, number of extraction ports 3 x 220 V, extraction port diameter 140 mm, weight: 130 kg. Storage location: Nattheim. Tjdpfx Aiexnlavsrod

Condition: new, Year of construction: 2025, Chip extraction unit ASA 2803 Mobile, with a 180° rotatable extraction unit For milling, planing, and sawing chips (not suitable for dust) The 180° rotatable extraction unit enables chip extraction from below or above Robust metal fan impeller Tjdpfohk S Sdsx Airod Standard equipment includes a high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip bags Fine filter bag, double-woven Dimensions and weights Chip collection volume: 2 x 120 l Outer diameter of extraction nozzle, inlet: 203 mm Outer diameter of extraction nozzle, outlet: 1 x 100, 2 x 120 mm Length approx.: 1500 mm Width/Depth approx.: 500 mm Height approx.: 2100 mm Weight approx.: 53 kg Electrical data Idle speed: 2950 min¯¹ Power consumption: 2.2 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 2 x 1.92 m² Noise emission Sound pressure level max.: 87.5 dB(A) Volume flow Nominal volume flow: 2800 m³/h Maximum negative pressure: 1900 Pa Scope of delivery: Two filter bags, two chip bags Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 3 chip collection bags of 175 liters each Suction nozzle 200 mm Airflow volume 3,300 m³/h Tsdpfx Aijxvxncsrjd Motor power 3 kW Filter area 3 x 2.2 m² The extraction unit was used once on a rental basis

Condition: new, Description: Planer Tjdpfx Aisu Diwlersd Surface planer with TERSA quick-change planing knife system With TERSA cutterblock for changing planing knives in seconds TERSA planer blade system enables particularly quiet running Helically toothed steel infeed roller for constant and even wood infeed The particularly long, one-piece planer tables enable easy planing of the workpieces Large planing fence can remain in position when the planing tables are opened Dressing tables open to the rear The high machine weight ensures maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction Special equipment features Work tables are made of gray cast iron, annealed and stress-free, making them robust and permanently flat Table lips for quiet running Equipment details TERSA planer cutterblock No more adjusting and screwing Planer blade change in seconds Self-locking Particularly quiet Perfect planing result Suction hose connection The extraction nozzles of the jointer and thicknesser point in the same direction. The hose is connected from one side only. No hose is required to reach around the machine. Drive Sturdy chain drive Steel drive wheels Solid cast iron bearing block Planing unit Solid kickback guards prevent workpieces from kicking back 3-blade TERSA shaft ensures an optimum planing pattern The material infeed Helical-toothed steel feed rollers for constant and even material feed without marks Several teeth engage simultaneously for powerful feed Wear-free in contrast to rubber feed rollers Technical data Jointer total table length 1510 mm Jointer working width 300 mm Jointer chip removal max. 4 mm Thicknessing dimensions thicknessing table 565 x 300 mm Thick working height min. 3 mm Thick working height max. 230 mm Thicknessing feed speeds 7 m/min Planer shaft speed 5200 min-1 Planer shaft diameter 72 mm Number of planing knives 3 pcs. Electrical connection 400 V Motor power 4.0 kW Suction nozzle diameter 2 x 120 mm Weight 270 kg Optional slot drilling device Table size 470 x 220 mm Optional slotted hole drilling device transverse/longitudinal stroke 160 mm / 110 mm Optional slot drilling device vertical stroke 120 mm Scope of delivery & equipment TERSA planer cutterblock Anodized aluminium planing fence

Condition: new, Year of construction: 2022, Exhibition machine Year of manufacture: 12/2022 Features and technical data: DESCRIPTION • Grinding unit tiltable by hand crank • The machine frame made of welded steel ensures high torsional rigidity and vibration-free operation • Oscillating sanding belt with a separate geared motor for improved sanding results • Oscillation can be switched on or off as needed • Sanding platen with graphite coating for longer belt life • Height-adjustable sanding table to utilize the entire belt width • Auxiliary table for sanding radii with integrated extraction ports • Sleeve sanding device with attachable work table • Spring-loaded belt tension automatically compensates for belt length differences • Equipped with adjustable stops, ideal for veneer sanding • Veneer overhang can be sanded off effortlessly TECHNICAL DATA Dimensions and weights Product length approx. 1700 mm Product width/depth approx. 1000 mm Product height approx. 1150 mm Net weight approx. 300 kg Drive power Oscillation motor power: 0.11 kW Tsdpfx Aow I Uvzsirod Extraction connection Extraction port diameter: 2 x 100 mm Work tables Table length: 950 mm Table width: 450 mm Table height adjustment: 110 mm Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Grinding unit Sanding belt length: 2640 mm Sanding belt width: 150 mm Belt speed: 14 m/s Oscillation stroke: 15 mm Sanding area length: 800 mm Sanding area width: 150 mm Tilt range of grinding unit: 0–45° SCOPE OF DELIVERY • 1x sanding belt K100 • 5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm • 6x sanding sleeves K80 – Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm • Standard tool kit • Mitre gauge Location: Hochheim Availability: Immediately

Condition: as good as new (ex-display), Year of construction: 2025, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 180 mm Slot length: 240 mm Height adjustment range: 160 mm Tjdpfxsv N Tyqo Airod Motor power: 2.2 kW Speed: 3000 rpm Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 260 kg