Used Horizontal Wrapping Machine for sale (66,519)

Condition: used, Year of construction: 2000, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller manufacturer: MORI SEIKI, controller model: MSX-502III, table width: 500 mm, table length: 500 mm, overall weight: 14,300 kg, With double pallet, Mori Seiki MSX-502III control system. Chodszxtbpepfx Aptsb Excluding workholding fixtures and tooling. PICK-UP BY SEPTEMBER 2026.

Condition: used, Year of construction: 2004, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 670 mm, controller manufacturer: MORI SEIKI, controller model: MSX-501, table width: 500 mm, table length: 500 mm, table load: 500 kg, overall weight: 11,400 kg, Features a double pallet system, Mori Seiki MSX-501 control unit, but lacks the pallet lifting motor and the door guide. Chedszxr U Iopfx Aptjb Workholding fixtures and tools are not included. COLLECTION MUST TAKE PLACE BY SEPTEMBER 2026.

Condition: new, Year of construction: 2026, pressure 28 t stroke 180 mm table-size 300 x 550 mm diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec return speed 20 mm/sec Max. pressure 200 bar weight of the machine ca. 0,65 t Chsdpfx Aegvkmrsptsb total power requirement 4 kW dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,350 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, controller manufacturer: Mori Seiki (Fanuc), controller model: MSX-701 (Fanuc 31i), workpiece height (max.): 1,450 mm, workpiece diameter (max.): 1,450 mm, workpiece weight (max.): 2,200 kg, total height: 3,850 mm, total length: 7,200 mm, total width: 4,300 mm, spindle speed (max.): 8,000 rpm, coolant supply: 70 bar, type of input current: AC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Offered here is a machining center from the manufacturer Mori Seiki. The machine is fully functional, in good condition, and can be inspected and tested at our facility. Manufacturer: Mori Seiki Model: NH8000 DCG Year of manufacture: 2008 Control unit: MSX 701-III Technical specifications: Travel distances X-Y-Z: 1400 x 1200 x 1350 mm B-axis: 0.001° Feed rate X, Y, Z: 50,000 mm/min Rapid traverse X, Y, Z: 50 m/min Pallet size: 800 x 800 mm Number of pallets: 2 Pallet change time: 16 s Max. workpiece weight: 2200 kg Max. workpiece diameter: 1450 mm Max. workpiece height: 1450 mm Spindle speed: 8000 rpm Spindle power: 37 kW Tool holder: HSK-A100 Tool magazine: 60 positions Tool change time: 1.9 s Distance between pallet surface and spindle center: 100–1300 mm Distance between pallet center and spindle nose: 100–1450 mm Total power consumption: 86 kVA Machine dimensions: approx. 7200 x 4300 x 3850 mm Transport dimensions machine: approx. 7000 x 3400 x 3300 mm Machine weight: approx. 30 t Csdpfx Aeyrdn Ueptehb Total weight incl. magazine and accessories: approx. 37 t Scope of delivery includes: 1x Mori Seiki NH8000 DCG machine 1x Matrix tool magazine 1x chip conveyor 1x coolant system 1x transformer Various tool holders

Condition: excellent (used), Year of construction: 2011, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 565 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, total height: 2,700 mm, total length: 4,000 mm, total width: 2,400 mm, table width: 400 mm, table length: 400 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 6,383 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Offered here is a horizontal machining center from the manufacturer Doosan. Operating hours: 11,320 h Chodpjyl Iu Esfx Apteb Spindle hours: 6,383 h The machine is in very good condition and can be inspected under power in our facility. Both clamping towers are included in the scope of delivery. Manufacturer: Doosan Model: HC 400 Year of manufacture: 2011 Control: Fanuc Series 32i-MODEL A Technical data: Travel X-Y-Z: 600x560x565 mm B-axis: 1° increment (indexing table) Rapid traverse X-Y-Z: 40 m/min Feed rates: 20,000 mm/min Pallet size: 400x400 mm Spindle speed: 8,000 rpm Tool holder: SK40 Machine weight: 11,000 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Model: BAW06-22 Year of manufacture: 2018 Machine No.: 2080519 Control: Siemens SINUMERIK Machine type: CNC horizontal twin-spindle machining center Country of origin: Germany Technical Data Working travels: X-axis: 600 mm Y-axis: 600 mm Z-axis: approx. 400–500 mm* Number of machining spindles: 2 Spindle arrangement: horizontal, twin spindle Spindle distance: 600 mm Maximum spindle speed: 17,500 rpm Tool holder: HSK-A63 Spindle power: up to 2 x 35 kW* Spindle torque: up to 2 x 80 Nm* Rapid traverse X/Y/Z: up to 100 m/min* Automatic tool changer: Yes Tool magazine: up to 84 positions / 2 x 42 tools* NC rotary/swivel workholding system Automatic workpiece changing/loading system Automation / Equipment Industrial robot for automatic loading and unloading Complete safety enclosure Automatic workpiece handling system NC-controlled rotary/swivel workholding Twin-spindle simultaneous machining Automatic tool changer KNOLL coolant filtration system High-pressure coolant system Chip evacuation system Central coolant supply Siemens operator panel CE marking Electrical Data Operating voltage: 3/PE / 400 V / 50 Hz Full-load current: 190 A Chedpfx Aozypmqjptob Pre-fuse: 200 A Pneumatic pressure: 7.0 bar Air consumption: 1.0 Nm³/min Electrical diagram No.: 205-000-20678-97 Weight Machine weight: approx. 16,000 kg Nameplate specification: 160 kN Description SW BAW06-22 CNC horizontal twin-spindle machining center, manufactured in 2018. The machine is designed for highly productive simultaneous machining with two horizontal machining spindles. Equipped with Siemens SINUMERIK CNC control, HSK-A63 spindle interface, high-speed spindles up to 17,500 rpm, automatic tool changing system and NC-controlled rotary/swivel workholding. The machine is integrated into an automated production cell with industrial robot for automatic workpiece loading and unloading. The machine is additionally equipped with a KNOLL coolant filtration system, high-pressure coolant supply, chip management system and complete safety guarding. Made in Germany.

Condition: used, Year of construction: 2011, operating hours: 5,051 h, functionality: fully functional, machine/vehicle number: 20, travel distance X-axis: 730 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 800 mm, controller model: PRO 5, spindle speed (max.): 12,000 rpm, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, Makino A61nx, 4-axis horizontal machining center, fully functional and can be inspected while powered on. 11,324 hours of power-on time 5,051 hours of operating/runtime 3,253 hours of machining time 4,188 hours of spindle runtime A Travels  X-axis travel (frame) ..... 730 mm  Y-axis travel (spindle) ..... 650 mm  Z-axis travel (table) ..... 800 mm  Distance from pallet surface to spindle center ..... 80 ~ 730 mm  Distance from pallet center to spindle nose ..... 100 ~ 900 mm  Linear guides, heavy-duty design, size (roller bearing) ..... #55  Size of ball screws (X, Y-axis / Z-axis) ..... #45 / #50 B NC rotary table (DD motor) C1 Spindle 14,000 rpm (240 Nm)  Tool holder ..... HSK-A63 D Feed drives  Rapid traverse speed ..... 60,000 mm/min  Feed speed ..... 1 ~ 50,000 mm/min  Feed speed (jog mode) ..... 1 ~ 8,000 mm/min Tool magazine  Storage capacity ..... 60 tools  Maximum tool diameter with space allocation ..... 170 mm  Maximum tool diameter without restrictions ..... 70 mm  Maximum tool length ..... 510 mm  Maximum tool weight ..... 12 kg Tool change time increases for tool weights over 8 kg.  Maximum imbalance relative to the gripper groove ..... 11.7 Nm  Maximum total weight of all tools in the magazine ..... 180 kg  Tool-to-tool change time (without door movement) ..... 0.9 s  Chip-to-chip time (ISO method) ..... 2.8 s Chedpfszw Dzdex Aptsb  Tool ready time in the magazine (min./max.) ..... 3.1 / 6.1 s Drives  Main drive ..... AC15 kW  Feed drives (XYZ axes) ..... AC4 kW  Table (indexing table) ..... AC0.9 kW

Condition: used, Year of construction: 2010, operating hours: 2,000 h, functionality: fully functional, travel distance X-axis: 8,500 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 320 mm, nominal power (apparent): 8 kVA, workpiece length (max.): 8,500 mm, total height: 3,100 mm, total length: 11,500 mm, total width: 3,000 mm, rotational speed (max.): 15,000 rpm, overall weight: 6,000 kg, spindle speed (min.): 15,000 rpm, spindle motor power: 5,500 W, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Elumatec SBZ 130 CNC 3-axis steel processing center, TOP condition Processes steel, stainless steel, aluminum, PVC, etc. The machine can mill, drill, tap, cut, and notch. All machining operations are performed while the profile is stationary. 8-position tool changer on a turret. Max. milling cutter diameter: 80 mm Max. disc cutter diameter: 200 mm Tools and accessories, including special wrenches, as shown in the picture. Tool holder: BT 30 Max. machining length: 850 cm, with stringer-side machining: 838 cm, y-axis: 48 cm, z-axis: 320 cm Year of manufacture: 2010, spindle speed: 15,000 rpm, spindle power: 5.5 kW Weight: approx. 6 tons. Includes laser and partition, protective mat, machining accuracy: x-axis, y-axis, z-axis +/- 0.1 mm Air consumption: approx. 75 liters, with spray nozzles. Inspection is possible by appointment. The machine is located in 91629 Weihenzell. Chodpsziy Idofx Aptob

Condition: used, Year of construction: 1999, Technical details: x-travel: 630 mm y-travel: 630 mm z-travel: 630 mm control: Unipro 90 Pallet changer 2x: 400 x 500 workpiece - installed height: 800 mm max. clampable workpiece diameter: 720 - 850 mm spindle taper:: SK 40 spindle turning speed - stepless: 10 - 8000 1/min Spindle power: 20 / 30 kW Spindle Torque: 95/143 Nm tool magazin:: 80 SK 40 total power requirement: 55 kW weight of the machine ca.: 11 t Machine with Unipro 90 control for 5 axis - twin palette changer - tool magazine 80 HSK-A 63 - coolant device with coolant through spindle 7 pressure levels - full A & B-axis - chip conveyor Chedpfx Aoy Rmk Roptjb *

Condition: used, Year of construction: 1998, Technical details: Chodpfx Apoy Er Tgotob x-travel: 630 mm y-travel: 600 mm z-travel: 650 mm control: MSC 502 (Fanuc 16) Spindle RPM: 12000 1/min spindle drive: 22 / 18,5 kW rapid travel x/y/z: 32 m/min Pallet dimension: 500x500 mm numbers of pallets: 2 table load: 0,5 t working diameter: max. 610 mm Number of tool station: 60 BT40 max. tool length: 360 mm max. tool weight: 12 kg tool changing time: 1,3 sec B-axis positioning (non continuous): 1 total power requirement: 50 kVA weight of the machine ca.: 14 t dimensions of the machine ca.: 3,3 x 5,8 x 3,2 m Accerories Chip conveyor spindle load monitor Typ C Coolant gun Chamfering and corner rounding Tool life management Interface for coolant through the spindle This horizontal machining center comes with a pallet changer with 2 pallets, and has the following options: ATC 60 tool stations, High pressure coolant trough spindle interface, *

Condition: used, Year of construction: 2008, Technical details: x-travel: 1400 mm y-travel: 1200 mm z-travel: 1350 mm control: MSX- 701 Mapps III table surface area: 800 x 800 mm rapid traverse: 50 m/min table rotating: 360.000 x 0,001 B-Achse ° table load: 2,0 t Chsdpfjwi Ibuex Aptjb numbers of pallets: 2 turning speed range: 8000 1/min power capacity - milling spindle: 37 kW no. of tools in the magazine: 60 Stück tool taper: HSK-A 100 weight: 31 t dimensions: 5,9 x 3,48 x 3,68 m Equipment: - Thru-the-spindel coolant system Mayfran Consep 2000 70 bar with chipconveyor - Helical cutting + Synchronized tapping - Parts program memory 1 MB - Knoll 70 bar high pressure and filter system - Electrostatic oil dust collector LTA - elect. hand wheel - renishaw probe - abso- scale i X/Y/Z- axis - 5 free m- funktions - 48 extra off sets - dual ballscrews on X/Y/Z- axis *

Condition: used, Year of construction: 2017, Technical details: x-travel: 560 mm y-travel: 560 mm z-travel: 660 mm control: Celos Siemens 840D SL Operate ERGOline Multitouch turning speeds: 20 - 20.000 1/min spindle drive: 25/ 35 kW max. torque on the spindle: 86 / 130 tool taper: HSK-A63 Number of tool station: 60 diameter of tools max.: 70 mm Tool diameter with no neighbouring tools: 170 mm tool length - max.: 450 mm weight of tools max.: 12 kg Codpfx Apeyqybbstshb numbers of pallets: 2 Pallet dimension: 400 x 400 mm max. workpiece diameter: 630 mm workpiece height max.: 900 mm table load: 400 kg rapid travel x/y/z: 60 m/min Feed x/y/z: 60 m/min internal coolant system feed: 70 bar weight of the machine ca.: 8,5 t dimensions: 3200 x 4800 x 2900 mm Accerories Rotoclear window Signal lamp 4 colours Electronic handwheel Probe for tool breakage and length measuring Coolant shower Renishaw probe (spindle) Vorbereitung / preparation only HSK cone cleaning station with brushes Horizontal machining center with Siemens - Celos control, full b-axis, tool magazine with 123 pos. HSK-A 63, coolant through spindle 40 bar. The machine has just received a new milling spindle. *

Condition: used, Year of construction: 2009, machine/vehicle number: FA71, Technical Specifications & Performance DataThe SMI SK450 T is a shrink wrapping machine for PET bottles, designed for secondary packaging applications within a used bottling line. Manufactured in 2009, this second hand unit includes a heating oven for controlled shrink-film processing and bundle formation. It is configured for industrial packaging operations requiring stable, transport-ready bottle packs.Manufacturer: SMIModel: SK450 TYear of production: 2009Capacity: 45 packs/minuteContainer type: PET bottlesIncluded equipment: Heating ovenPackage configurations: 0.5L in 3x3, 0.75L in 2x3, and 1.5L in 2x3Advanced Automation & Control SystemsThis shrink wrapping machine is intended for coordinated operation in an industrial packaging environment, where bottle infeed, film handling, heat shrinking, and discharge must remain synchronized. Its operating setup supports repeatable bundle production for the stated PET bottle formats. Installation and commissioning should include verification of the existing control interface, electrical connection, conveyor synchronization, and heating-oven operating parameters.Production Line Integration CapabilitiesThe SK450 T can be positioned downstream of filling, capping, labeling, or accumulation equipment to create multipacks for distribution. In a beverage production line, shrink wrapping provides a practical secondary-packaging stage between bottle handling and palletizing. The machine is suited to PET bottle bundles in 3x3 and 2x3 arrangements, allowing the line to handle the documented 0.5L, 0.75L, and 1.5L formats.For integration into a used bottling line, upstream and downstream conveyors should be matched to the machine's infeed and discharge flow. The heating oven forms part of the packaging process and should be assessed together with film transport components, bottle guides, and pack transfer arrangements during installation planning.Machine Condition & Maintenance HistoryThe machine is in production and remains operational until 30 September 2026. It is described as being in very good condition, with regular maintenance and extensive annual overhauls carried out by the manufacturer. This maintenance history is relevant for buyers seeking second hand bottling equipment with documented attention to operational continuity and packaging performance.Operational Performance & VersatilityWith a stated output of 45 packs per minute, the SMI SK450 T supports efficient shrink-film bundling of PET bottles for industrial packaging. The documented pack patterns provide flexibility for common beverage production formats, including compact 0.5L bundles and larger 0.75L and 1.5L bottle configurations. Shrink wrapping helps produce stable multipacks suitable for handling, storage, and onward palletizing.Installation Requirements & Site PreparationSite preparation should provide sufficient space for the shrink wrapper, heating oven, safe material flow, and access for operation and maintenance. The installation layout should account for bottle conveyors, film supply, bundle discharge, and connection to downstream packaging machinery. Electrical services and any required line utilities should be checked... Chodeztwl Iepfx Aptjb

Condition: refurbished (used), Machine is located at our premises in Burscough. We welcome any inspections prior to sale. Spindle Diameter 4" / 101.6mm Cedpfx Apjzwmrlstjhb Spindle Taper 50 INT Main spindle travel 30" / 762mm Spindle speeds 10 - 1300rpm Vertical Y Travel - 48" / 1219mm Main Motor 25 HP Equipment - Facing head, outer (tailstock) steady Vast amount of tooling, rotary table, angle plates. DRO Pendant control This machine has undertaken a full machine rebuild and all slides re ground. Exceptional condition

Condition: used, Technical specifications: Chedpfxozvm Nns Apteb Max. transverse travel of the working unit: 300 mm Max. longitudinal travel of the working unit: 200 mm Vertical stroke of the working unit: 250 mm Length of the work table: 570x300 mm Power supply: 380 V Motor power: 2 kW Overall dimensions: Length: 1200 mm Width: 1010 mm Height: 1100 mm

Condition: used, SIPA horizontal drilling machine Chedozvm Iqopfx Aptob

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 65352, functionality: fully functional, travel distance X-axis: 3,765 mm, travel distance Y-axis: 1,585 mm, travel distance Z-axis: 170 mm, number of axes: 3, number of slots in tool magazine: 12, TECHNICAL DETAILS Milling spindle Number of controlled axes: 3 Tool holder: ISO 30 Motor power: 1.7 kW Drilling unit Csdpfjzuwt Isx Aptohb Drilling tool available: Yes Vertical drilling spindles: 10 pcs. Table and working area Type of milling table: Flat table Table length: 3,750 mm Table width: 1,560 mm Working area X-axis: 3,765 mm Working area Y-axis: 1,585 mm Working area Z-axis: 170 mm Z-axis travel max.: 324 mm Material clamping system: Pneumatic Tool changer and control Number of tool changer positions: 12 pcs. MACHINE DETAILS System/Software: BiesseWorks Vacuum pump Brand: Busch Type: MM1322AVM Capacity: 360 m³/h Connection diameter: 60 mm Oil-free: Yes Dimensions & Weight Dimensions (L x W x H): 5,600 x 2,250 x 2,550 mm Installed length: 6,465 mm Installed width: 4,794 mm Installed height: 2,550 mm Shipping weight: 2,500 kg Shipping packages: 2 pcs. EQUIPMENT Tools included Vacuum pump Busch MM1322AVM Safety mat CE marking

Condition: used, Year of construction: 1976, functionality: fully functional, machine/vehicle number: 4218/ 12035, Axis height over bed: 1500 mm Speed: 0 - 315 rpm Range of diameters and length of drilling on one side:. D 35 – 45 mm L = 4000 mm D 46 – 65 mm L = 6000 mm D 66 – 85 mm L = 8000 mm D 86 – 105 mm L = 12,000 mm Chodowqk Umopfx Aptjb D 106 – 125 mm L = 16,000 mm D 126 – 200 mm L = 24,500 mm D 201 – 250 mm L = 24,500 mm D 251 – 555 mm L = 18,000 mm

Condition: used, Year of construction: 2003, x-travel 800 mm y-travel 600 mm z-travel 805 mm Control Sinumerik 840D weight of the machine ca. 13 t 1 horizontal machining centre Make: HECKERT type: CWK 500D year 2003 serial no. 16087 Chodpjuddgfofx Aptob control, make: Siemens, type: Sinumerik 840D travel X/Y/Z 800 x 600 x 805 mm 2-fold pallet changer pallet size 500 x 500 mm NC-rotary table 360 x 0,001° 60-fold tool changer, tool holder HSK 63 Speed max. 15,000 rpm IKZ 50 bar Operating hours 32,450 Spindle hours 6.080 Accessories: Coolant temperature control, belt filter, chip conveyor, spindle cooling, Infrared probe preparation

Condition: used, Year of construction: 1995, grinding length 600 mm grinding width max. 320 mm workpiece height max. 500 mm magnetic clamping plate 300 x 605 mm horiz. table movement: longitudinal man. max. 750 mm horizontal table movement: cross max 340 mm sanding disc diameter 355 mm table load max. 420 kg grinding wheel width 50 mm bore 127 mm spindle turning speed range 1500 U/min rapid traverse vertical 400 mm/min weight of the machine ca. 2500 kg Cedpfszkv Ayox Aptehb dimensions of the machine ca. ca. 2800x2000x1800 mm

Condition: used, Year of construction: 2007, total height: 2,500 mm, total length: 11,000 mm, total width: 2,400 mm, Colour: Grey Empty weight: 7.200 kg Price: On request - Machine available from: 2026-06-24 - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 97649 - Number of milling spindles [pcs.]: 2 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Min. spindle speed [rpm]: 1000 - - Max. spindle speed [rpm]: 20000 - - Main motor power [kW]: 9 - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 3 - - Main motor power [kW]: 18.5 - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: No - Tool changer positions [pcs.]: 22 - System/software: BiesseWorks - Safety feature: Safety mat - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: VTLF 250 - └ Year of manufacture: 2007 Cedpfxjy Ipnto Aptohb - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 250 - Tools included: No - CNC options: EPS system, Offcut conveyor, Manual control - CNC documentation available: User keys/licenses, USB stick - Table length [mm]: 6200 - Table width [mm]: 1320 - Working range X [mm]: 6200 - Working range Y [mm]: 1535 - Z-axis working range [mm]: 275 - X-axis maximum stroke [mm]: 6820 - Y-axis maximum stroke [mm]: 1963 - Transport dimensions: 11000mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 7200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2014, operating hours: 11,517 h, total height: 2,880 mm, total length: 10,000 mm, total width: 2,700 mm, Colour: White Empty weight: 6.000 kg Cedsx E Uk Uepfx Aptshb - Year: 2014 - Documentation available: No - CE certificate present: No - Serial number: 070614/B/1-407 - Operating hours: 11517 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Main motor power [kW]: 10 - - C-axis present: Yes - Type milling table: Flat table - Drilling unit present: Yes - └ Motor power [kW]: 3.6 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 18 - Tool changer positions [pcs.]: 12 - System/software: TWINCAT - Safety feature: Safety mat, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Becker - └ Year of manufacture: 2023 - └ Main motor power [kW]: 18.5 - └ Capacity [m³/h]: 600 - └ Vacuum pressure [bar]: 250 - └ Oil free: Yes - CNC documentation available: USB stick - Table length [mm]: 5150 - Table width [mm]: 1600 - Working range X [mm]: 7220 - Working range Y [mm]: 1580 - Z-axis working range [mm]: 180 - Voltage [V]: 400 - Transport dimensions: 10000mm x 2700mm x 2880mm (l x w x h) - Transport weight [kg]: 6000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2014, total height: 2,800 mm, total length: 10,300 mm, total width: 2,450 mm, Colour: Grey Empty weight: 6.600 kg Price: On request - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA2/002546 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - Type milling table: Beam table - Tool holder: HSK-F63 - Drilling unit present: Yes - └ Motor power [kW]: 3 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 24 - Vacuum pump present: Yes Chodpfx Apjytcl Ijtsb - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Vtlf 250 - └ Year of manufacture: 2008 - └ Main motor power [kW]: 5.5 - └ Connection diameter [mm]: 70 - └ Oil free: Yes - Tools included: Yes - Table length [mm]: 5200 - Table width [mm]: 1300 - Voltage [V]: 400 - Current consumption [A]: 64 - Transport dimensions: 10300mm x 2450mm x 2800mm (l x w x h) - Transport weight [kg]: 6600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1982, grinding length 0600 mm grinding width 200 mm workpiece height 250 mm magnetic plate size 600 x 200 mm total power requirement 4,5 kW weight of the machine ca. 2,5 t Csdpou Rt Dijfx Aptjhb dimensions of the machine ca. 2000 x 1200 x 1650 mm With magnetic plate 600 x 200 mm and automatic dressing arrangement.

Condition: used, Year of construction: 1988, grinding length 0600 mm Chsdju Rt E Tepfx Aptjb grinding width 200 mm workpiece height 250 mm magnetic plate size 600 x 200 mm total power requirement 4,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2000 x 1200 x 1650 mm With magnetic plate 600 x 200 mm and automatic dressing arrangement.