Used machining centers (horizontal) X-axis travel 600-799mm for sale (133)

Condition: repair required (used), Year of construction: 1998, operating hours: 34,188 h, functionality: limited functionality, machine/vehicle number: 18455, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, torque: 165 Nm, controller manufacturer: Siemens, total height: 2,500 mm, total length: 10,000 mm, total width: 6,000 mm, table width: 400 mm, table length: 400 mm, table load: 400 kg, overall weight: 12,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 19,000 W, number of spindles: 1, number of slots in tool magazine: 240, Equipment: chip conveyor, documentation/manual, We are offering a Starrag Heckert CWK 400D horizontal machining center from 1998, which requires repair. Dodj Ah Sn Sjpfx Aidewd Manufacturer: Starrag Heckert Model: CWK 400D Machine type: Horizontal machining center Year of manufacture: 1998 Condition: Requires repair If you have any questions or need further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2011, operating hours: 5,051 h, functionality: fully functional, machine/vehicle number: 20, travel distance X-axis: 730 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 800 mm, controller model: PRO 5, spindle speed (max.): 14,000 rpm, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, Makino A61nx, 4-axis horizontal machining center, fully functional and can be inspected while powered on. 11,324 hours of power-on time 5,051 hours of operating/runtime 3,253 hours of machining time 4,188 hours of spindle runtime A Travels  X-axis travel (frame) ..... 730 mm  Y-axis travel (spindle) ..... 650 mm  Z-axis travel (table) ..... 800 mm  Distance from pallet surface to spindle center ..... 80 ~ 730 mm  Distance from pallet center to spindle nose ..... 100 ~ 900 mm  Linear guides, heavy-duty design, size (roller bearing) ..... #55  Size of ball screws (X, Y-axis / Z-axis) ..... #45 / #50 B NC rotary table (DD motor) C1 Spindle 14,000 rpm (240 Nm)  Tool holder ..... HSK-A63 D Feed drives  Rapid traverse speed ..... 60,000 mm/min  Feed speed ..... 1 ~ 50,000 mm/min  Feed speed (jog mode) ..... 1 ~ 8,000 mm/min Tool magazine  Storage capacity ..... 60 tools Djdpfx Ajzw Dzdjidewd  Maximum tool diameter with space allocation ..... 170 mm  Maximum tool diameter without restrictions ..... 70 mm  Maximum tool length ..... 510 mm  Maximum tool weight ..... 12 kg Tool change time increases for tool weights over 8 kg.  Maximum imbalance relative to the gripper groove ..... 11.7 Nm  Maximum total weight of all tools in the magazine ..... 180 kg  Tool-to-tool change time (without door movement) ..... 0.9 s  Chip-to-chip time (ISO method) ..... 2.8 s  Tool ready time in the magazine (min./max.) ..... 3.1 / 6.1 s Drives  Main drive ..... AC15 kW  Feed drives (XYZ axes) ..... AC4 kW  Table (indexing table) ..... AC0.9 kW

Condition: good (used), Year of construction: 2006, CNC Horizontal Machining Center, Manufacturer: HÜLLER HILLE, Type: BLUESTAR 5, Year: 2006 Control system: SIEMENS Sinumerik 840D. Travel distances: 700 mm (Y), 680 mm (Z), 700 mm (X) Rapid traverse rate: X, Y, Z: 50 m/min Pallet size: 500 mm x 500 mm Dwjdj Aicw Aepfx Aidjd Spindle connection: HSK 63, magazine with 40 positions Spindle speeds: Up to 10,000 rpm Chip conveyor, internal cooling system, machine documentation available. Machine in good condition. Further details can be found in the data sheets.

Condition: good (used), Year of construction: 2005, operating hours: 33,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Okuma, controller model: OSP E100, table width: 500 mm, table length: 500 mm, rotational speed (min.): 10 rpm, rotational speed (max.): 15,000 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, Horizontal machining center Okuma MB 500H with a 2-position pallet changer Year of manufacture: 2005 Control system: Okuma OSP E100M Technical data: Spindle speed: 10 - 15,000 rpm Drive power: 26 kW Tool holder: BT 40 Number of magazine positions: 60 Internal coolant pressure: 70 bar Travel distances: X-axis: 800 mm Y-axis: 800 mm Z-axis: 800 mm 4th axis: Index 1° Number of pallets: 2 Dsdpfjz Tc Uyex Aidswd Pallet size: 500x500 mm Accessories: - Coolant system, type ConSep 2000, by Mayfran - Chip conveyor, type ConSep, by Mayfran - Tool breakage monitoring in the magazine - Workpiece coolant shower

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 030 515 428, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Fanuc G-Tech 16i, table length: 500 mm, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 600 mm Main spindle speed: 50–12,000 rpm Spindle mount: BT 40, JIS B 6339 Big+ Djdpfx Ae Afhlasidjwd Tool magazine capacity: 120 tool positions Preparation for tool magazine capacity: 240 tool positions Pallet changer: 2 pallets Pallet storage: 6 pallets Table size: 500 mm x 500 mm MACHINE DETAILS Operating hours: approx. 73,000 h CNC control: Fanuc G-Tech 16i Tool magazine: 120 positions Internal cooling: 70 bar Coolant pressure: switchable in 3 stages Coolant pump output: 5.5 kW Coolant flow rate: 17 l/min at 70 bar Coolant pressure: 70 bar External coolant pump: 100 l/min at 1.4 bar Filter capacity: approx. 250 l/min Dimensions of the coolant system (L × W × H): approx. 2,200 × 1,500 × 2,250 mm EQUIPMENT 6-position pallet changer 4th axis Knoll high-pressure system Tool magazine with 120 tool positions, prepared for 240 tool positions Tool changer with 31 tool positions Loading and setup station 2 spiral chip conveyors KNOLL coolant system with scraper conveyor and lift pump Coolant pump KTS25-50 for coolant supply through the spindle External coolant pump Coolant shower Precision NC rotary table instead of the indexing table Direct measuring system and control extension for the B-axis CE marking Tool breakage monitoring Automatic tool length correction Rotating viewing window Note: The machine has already been dismantled.

Condition: like new (used), Year of construction: 2022, operating hours: 10,000 h, functionality: fully functional, number of slots in tool magazine: 80, MAZAK HCN-5000 Horizontal Machining Center Year 2024 Control Unit: Smooth G X-axis travel: 730 Y-axis travel: 730 Z-axis travel: 800 Table length: 500 Table width: 500 Maximum workpiece dimensions (length x width x height): D.800x1000 Table surface: Tapped holes Maximum workpiece weight: 700 kg Spindle speed: 18000 rpm (high torque) Spindle taper: ISO 40 Rapid traverse rate (X-axis): 60,000 Rapid traverse rate (Y-axis): 60,000 Rapid traverse rate (Z-axis): 60,000 Number of tools (ATC): 40-60-80 Dsdpfx Ajz Aaukoidswd Maximum tool diameter (ATC): D. 95 D.170 Maximum tool length (from reference line) (ATC): 170 Tool selection method (ATC): FIXED Maximum tool weight (ATC): 12 Tool change time (ATC): 2.8 Coolant pressure: 15 Bar Coolant tank capacity: 500L Height (machine dimensions): 2813 Width (machine dimensions): 2623 Depth (machine dimensions): 5769 Weight (machine dimensions): 11430 Pallet size: 500x500

Condition: ready for operation (used), Year of construction: 2004, operating hours: 91,012 h, functionality: fully functional, machine/vehicle number: 31-46644, overall weight: 9,000 kg, The HELLER MCi 16.2 is a high-precision, CNC-controlled horizontal machining center (HMC) from the German manufacturer HELLER. The machine is designed for productive and flexible series production (e.g., in mechanical engineering or the automotive sector). Equipment: -Horizontal spindle, pallet changer with rotary table, additional 4-position rotary table (manufacturer: RILE RSP-MC+16.2, year of manufacture: 2004, serial number: 0421635093) -2nd operator terminal, chain-type tool changer with 160 tool positions, HSK 63, chip conveyor (manufacturer: Knoll 600K, coolant/lubricant treatment system with strip filter, control cabinet, separate cooling unit (manufacturer: BKW) Dsdpfx Aisz N Ewiedswd Control system: -Siemens 840D Accessories: -Telescopic drawer cabinet (8 drawers) with attached work surface, workbench (1 door) with partition, lighting fixture Contents: various machine accessories Attractive offer – flexible & worry-free We offer you not only a high-quality product but also customized financing options that adapt to your needs. Whether it’s a down payment, installment payment, or individual financing models – together we will find the right solution. If desired, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and on-time process so that you don't have to worry about anything. 📞 Please contact us for more information or a non-binding offer. We will advise you personally and competently. Subject to prior sale, changes, and errors!

Condition: good (used), Year of construction: 2013, operating hours: 35,050 h, functionality: fully functional, machine/vehicle number: NS4330, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 600 mm, feed length Y-axis: 600 mm, feed length Z-axis: 600 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 52 kVA, controller manufacturer: FANUC, controller model: 31i, workpiece height (max.): 750 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 400 kg, total height: 3,020 mm, total length: 5,363 mm, total width: 2,500 mm, table width: 450 mm, table height: 1,200 mm, table length: 450 mm, table load: 400 kg, rotary table diameter: 450 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 15,000 rpm, overall weight: 11,500 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 50 bar, spindle motor power: 22,000 W, spindle nose: BT40, number of slots in tool magazine: 120, tool length: 350 mm, tool diameter: 140 mm, tool weight: 8,000 g, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer a Toyoda FH450S, 4-axis horizontal CNC machining center, manufactured in 2013 (April 2013), purchased new and installed at our facility in 2015. It is in good used condition. Manufacturer: Toyoda (JTEKT) Model: FH450S Serial Number: NS4330 Year of Manufacture: 2013 Condition: Used, good condition Main Specifications: - CNC Control: FANUC 31i (1,000 programs, 499 tool offsets, 48 coordinate systems, Ethernet card, program restart) - X/Y/Z Travels: 600 / 600 / 600 mm - 2 pallet changers, 450 x 450 mm, with automatic pallet changer (7 s) - Maximum load per pallet: 400 kg; maximum workpiece size Ø 630 x 750 mm - B-axis: continuous NC table, resolution 0.001° - Spindle: BT40, 50 - 15,000 rpm, power 22 / 18.5 kW (30 min / continuous) - Rapid Traverse Rates X / Y / Z: 50 m/min; roller guides - Positioning Accuracy: ±0.003 mm, Repeatability: ±0.0015 mm - Tool Magazine: 120 positions (expanded from 60); tool change time 1.2 s - Power Supply: 380 V - 3-phase - 50 Hz, 52 kVA - Machine Weight: 11,500 kg; footprint 2,500 x 5,363 mm, height 3,020 mm Additional Equipment: - Coolant through spindle with 30 µm fabric filter and approximately 800-liter tank - Pump: 45 l/min at 50 bar Dwjdj Ad Rn Uopfx Aided - Toyoda chip evacuation system with 70 bar pump and cyclone filter - Knoll chip conveyor for cast iron and aluminum, oil skimmer - Renishaw RMP60 probe with software and measuring programs - Toyoda OP Supporter 20i tool load monitoring system - BTS sensors for thermal expansion of axes and spindle - Preparation for FMS Fastem connection - Manuals: 3 sets of Toyoda and 2 sets of Fanuc; CE marking Machine Hours (as of 10/07/2026): 35,050 h - Parts Produced: 87,681 Clamping devices, tools, and tool holders: to be agreed upon. Complete technical data sheet with photos available upon request. Available for viewing by appointment. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 10160, travel distance X-axis: 800 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 805 mm, rapid traverse X-axis: 38 m/min, rapid traverse Y-axis: 38 m/min, rapid traverse Z-axis: 38 m/min, total height: 3,500 mm, total length: 7,000 mm, total width: 6,000 mm, overall weight: 17,000 kg, number of slots in tool magazine: 180, tool length: 600 mm, tool diameter: 250 mm, tool weight: 35,000 g, STARRAG HECKERT CWK 500 Horizontal Machining Center - Tool holder: HSK A 100 - Min. distance from the front edge of the working spindle to the center of the pallet: 150 mm - Min. distance from the center of the working spindle to the top edge of the pallet: 100 mm - Max. permissible height of workpiece and clamping devices for changing the work area: 900 mm - Workpiece side (pallet) with hole grid according to DIN 55201, clamping surface: 500 x 500 mm - Max. load per pallet (centered): 800 kg - Guide bore diameter: 20 H6 - Centering bore diameter: 50 H6 - Number of mounting threads: 23 x M12 - Distance of the guide bore to the center of the table: diameter 200 +- 0.013 mm - Interference circle diameter: 800 mm - Max. table rotation: 18 rpm - Automatic pallet changer - Pallet changer with rotating setup station - max. pallet change time: 10 sec - Pallet change time with clamping hydraulics: min. 12 sec - Feeds: X/Y/Z axis: continuously adjustable working feed range: 1 - 38,000 mm/min - Working spindle diameter in the front bearing: 100 mm - Max. tool diameter with free neighboring positions: 250 mm - Max. tool diameter for bridge tools: 500 mm - Max. tool diameter with occupied neighboring positions: 125 mm - Tool overhang length: 600 mm - Max. tool weight: 35 kg - Average tool weight with full occupancy: 10 kg - Max. imbalance in the tool magazine: 100 kg - Number of pallets: 2 Dwjdpfx As Afnc Esidsd With Balluff system, technical documentation, with RENISHAW 3D measuring probe, including 30 HSK 100 tool holders, mostly equipped with tools. Transport: The machine can most likely be transported on a truck with a width of up to 3000 mm. FCA D-01445 Radebeul - loaded onto a truck

Condition: good (used), Year of construction: 2008, operating hours: 54,682 h, functionality: limited functionality, machine/vehicle number: 211934, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, feed length X-axis: 730 mm, feed length Y-axis: 730 mm, feed length Z-axis: 740 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 57 kVA, controller manufacturer: Mazatrol, controller model: Mazatrol Matrix Nexus, workpiece length (max.): 800 mm, workpiece width (max.): 800 mm, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 700 kg, total height: 2,814 mm, total length: 4,690 mm, total width: 2,330 mm, table width: 500 mm, table height: 1,100 mm, table length: 500 mm, table load: 700 kg, rotary table diameter: 500 mm, rotational speed (min.): 35 rpm, rotational speed (max.): 18,000 rpm, overall weight: 11,000 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 25,876 h, coolant supply: 8 bar, distance table to spindle center: 830 mm, distance table center to spindle nose: 810 mm, spindle motor power: 25,000 W, spindle mount: MK 1, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 40, mount diameter: 100 mm, input voltage: 480 V, Equipment: chip conveyor, documentation/manual, We are selling a used Mazak HCN Nexus 5000 machining center, manufactured in 2008, with a dual-pallet changer. This is a well-maintained machine from its first owner, and it can be inspected while powered on. Photos and a technical description can be found in the attachment. Dwjdpfj Agnq Hjx Aidod

Condition: used, Year of construction: 2013, operating hours: 29,512 h, functionality: fully functional, machine/vehicle number: NS4331, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 600 mm, feed length Y-axis: 600 mm, feed length Z-axis: 600 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 52 kVA, controller manufacturer: FANUC, controller model: 31i, workpiece height (max.): 750 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 400 kg, total height: 3,020 mm, total length: 5,363 mm, total width: 2,500 mm, table width: 450 mm, table height: 1,200 mm, table length: 450 mm, table load: 400 kg, rotary table diameter: 450 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 15,000 rpm, overall weight: 11,500 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 45 bar, spindle motor power: 22,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 120, tool length: 350 mm, tool diameter: 140 mm, tool weight: 8,000 g, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer a Toyoda FH450S, 4-axis horizontal CNC machining center, manufactured in 2013 (March 2013), purchased new and installed at our facility in August 2016. It is in good used condition. Manufacturer: Toyoda (JTEKT) Model: FH450S Serial Number: NS4331 Year of Manufacture: 2013 Condition: Used, good condition Key Specifications: - CNC Control: FANUC 31i (1,000 programs, 499 tool offsets, 48 coordinate systems, Ethernet board, program restart) Dwjdpfxj Ad Rhns Aidsd - X / Y / Z Travel: 600 / 600 / 600 mm - 2 perforated pallets, 450 x 450 mm, with automatic pallet changer (7 s) - Maximum pallet load: 400 kg; maximum workpiece size Ø 630 x 750 mm - B-axis: NC rotary table, resolution 0.001° - Spindle: BT40, 50 - 15,000 rpm, power 22 / 18.5 kW (30 min / continuous) - Rapid Traverse Rates X / Y / Z: 50 m/min; roller guides - Positioning Accuracy: ±0.003 mm, repeatability ±0.0015 mm - Tool Magazine: 120 positions (expanded from 60); tool change time 1.2 s - Power Supply: 380 V - 3-phase - 50 Hz, 52 kVA - Machine Weight: 11,500 kg; footprint 2,500 x 5,363 mm, height 3,020 mm Additional Equipment: - Through-spindle coolant with 30 µm fabric filter and approximately 800-liter tank - Pump: 45 l/min at 50 bar - Toyoda chip evacuation system with 70 bar pump and cyclone filter - Knoll chip conveyor for cast iron and aluminum, oil skimmer - Probe

Condition: good (used), Year of construction: 2000, functionality: fully functional, operating hours: 10,000 h, travel distance X-axis: 680 mm, travel distance Y-axis: 680 mm, travel distance Z-axis: 680 mm, number of slots in tool magazine: 60, table width: 500 mm, torque: 237 Nm, nominal power (apparent): 25 kVA, rapid traverse X-axis: 45 m/min, spindle speed (min.): 12,000 rpm, Equipment: chip conveyor, Horizontal machining center Hitachi Seiki HS 500 offered by user due to production change. The machine was exclusively used for specialized tasks (medical technology) and primarily machined aluminum and stainless steel. The condition is excellent for its age, with approximately 10,000 cycle hours and 27,000 power-on hours. Control: Sigma (Fanuc), 2 pallets, 500 x 500 mm. Dwodpfx Aevnl Droided Technical data see PDF. Inspection under power is possible. Clamping devices are not included with the machine! Loading with the overhead crane is possible!

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 1380.02, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,700 mm, feed rate X-axis: 24 m/min, feed rate Y-axis: 24 m/min, feed rate Z-axis: 24 m/min, controller manufacturer: Siemens, controller model: Sinumerik 840D, table load: 3,000 kg, spindle speed (max.): 14,000 rpm, spindle motor power: 35,000 W, number of slots in tool magazine: 364, tool length: 700 mm, tool weight: 40,000 g, Equipment: documentation/manual, For sale: horizontal CNC machining center mCm Action 2600. Technical specifications: Working range: Table dimensions: 125 x 1250 [mm], axis travels X/Y/Z: 2600/1600/1700 [mm] Table load capacity: 3000 kg Control system type: Siemens – Sinumerik 840 D Spindle: HSK 100; spindle power: 35 kW; spindle speed: 14,000 rpm Axis positioning accuracy: 0.01 [mm] – axis measurement system: optical scales Axis feed rate (rapid traverse): 24,000 mm/min Cooling system type: tool cooling – no; spindle cooling – yes Cutting fluid – yes – external/internal through the spindle (25 bar) Number of axes: 4-axis machine Drive type: servo drives Machining range: diameter: 2750 mm; height: 1750 mm Additional equipment: Dwsdj Ahpn Sjpfx Aidsd Tool magazine: number of positions: 364 Maximum tool length: L = 700 mm; Maximum tool weight: 40 kg Material feeding system: loading station at the pallet magazine Pallet system – 4 pallets and 1 pallet loading station and 1 machine table – a total of 6 pallets Chip removal system – yes Cooling system – control cabinet air conditioning: yes; spindle cooling: yes Workpiece measuring probe – no; tool breakage detection system – yes Central vacuum cleaner for cleaning parts from chips and cutting fluid residue – yes Operating manual – paper version in German, digital version in German. The buyer is responsible for arranging the container, packaging, and transportation company.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Modern 5-axis machining center for the complete and highly efficient production of “BLISK” (integral rotor blade assemblies) - Year of construction: 2019 - Maximum diameter of the rotor disc: Ø750 mm - Travel range X-axis: 700 mm - Travel range Y-axis: 400 mm - Travel range Z-axis: 400 mm - Swivel range A-axis: 360° (continuous rotation) - Swivel range B-axis: ±87° - Rapid traverse rate X-axis: 62 m/min - Rapid traverse rate Y-axis: 62 m/min - Rapid traverse rate Z-axis: 62 m/min - Rapid traverse rate A-axis: 200 rpm - Rapid traverse rate B-axis: 60 rpm - Maximum spindle speed: 18,000 rpm - Spindle motor power: 28 kW - Torque at 100% load: 181 Nm - Tool interface: HSK-A63 - Tool magazine capacity: 62 positions (ATC) - Maximum tool diameter: Ø150 mm - Maximum tool length: 250 mm - Maximum tool weight: 6.5 kg - Tool change time: 8 s - Tool change system: Dual gripper - Overall length: 5000 mm - Overall width: 3260 mm - Overall height: 3200 mm - Machine weight: 12,000 kg Equipment - Coolant filtration system: KNOLL – paper filter system - Chip conveyor: KNOLL 450-K1 - Laser tool measuring system: BLUM - Measuring probe: RENISHAW - Cooling unit: STARRAG Dwjdpfx Ao Ah E Tvjidjd - Flushing gun - Chip container - Electronic handwheel - Operating manuals

Condition: like new (used), Year of construction: 2017, operating hours: 10,000 h, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, Base Machine - SH-5000P - Demonstration Machine Like New • Basic machine, 4-axis • Control: Siemens 840D sl • Table size: 500x500mm • Max. table load: 500kg • X/Y/Z travels: 730/730/830mm • X/Y/Z rapid traverse: 60/60/60 m/min • Milling spindle: • HSK63 • 30/50kW • 18,000 rpm • Tool magazine with 40 stations • Automatic pallet changer • Automatic loading door • Hydraulic unit • Oil separator • Oil mist extraction • Air conditioning unit for electrical cabinet • External measuring systems, linear axes • Media feed under pallets • Central lubrication • Door interlock • Coolant unit • Internal cooling with 70 bar high pressure • Coolant and compressed air gun • Chip conveyor Dwodpfx Aj Af Ui Rsidod • Documentation in German, digital

Condition: good (used), Year of construction: 2014, functionality: fully functional, Operating hours and spindle hours: 23.323 / 15.894 CNC control: Siemens 840D sl TECHNICAL DATA: X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 880 mm Max. spindle speed: 12.000 rpm Max. torque: 102 Nm Tool taper: SK40 Max. workpiece weight per pallet: 500 kg Max. workpiece diameter: 630 mm Max. workpiece height: 900 mm B-axis (table) 360° x 0,001° Number of tool positions: 40 FEED RATES Max. feed rate: 60.000 mm/min Rapid traverse: 60 m/min Jog feed rate: 0 – 5.000 mm/min Total power requirement: 57 kVA Machine weight: approx. 11.5 tonnes Space requirement: 5.5 x 3.0 x 2.8 m EQUIPMENT AND ACCESSORIES 2-station pallet changer; pallet size: 500 x 500 mm Chip conveyor, high-pressure coolant system (40 bar) Dwsdj Aa S T Repfx Aidsd Through-spindle coolant supply, tool changer, documentation B-axis (table) 360° x 0,001° Heidenhain touch probe

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, controller manufacturer: Mazatrol, controller model: Matrix, workpiece height (max.): 100 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 700 kg, total height: 2,813 mm, total length: 5,985 mm, total width: 3,056 mm, table width: 500 mm, table length: 500 mm, table load: 700 kg, overall weight: 11,000 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 15 bar, spindle motor power: 35 W, number of spindles: 1, number of slots in tool magazine: 80, Equipment: chip conveyor, documentation/manual, We are pleased to offer this Mazak HCN 5000-II horizontal machining centre. This machine was manufactured in 2007 and is fitted with the tried-and-tested Mazatrol Matrix control system. A robust and precise machine, suitable for efficient machining and batch production. Thanks to the horizontal spindle and pallet configuration, the machine is suitable for versatile machining operations and high productivity. Technical specifications: Table dimensions: 500 x 500 mm Number of pallets: 2 Table load capacity: 700 kg Djdez Rmn Eopfx Aidswd X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 740 mm Table indexing: 0.001° Spindle mount: CAT 40 Spindle speed: 35 – 18,000 rpm Spindle motor: 35/26 kW Magazine capacity: 80 positions We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: good (used), Year of construction: 2001, functionality: fully functional, CNC Horizontal Machining Center Dwsdpfx Aio Ah H Txodod Deckel Maho DMC60H Year: 2001 Approx. 55,000 operating hours The machine has been regularly maintained, is fully functional, and is currently ready for demonstration while powered on. TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Control system: Siemens Sinumerik 840D Spindle speed: 15,000 rpm Tool interface: HSK-A63 Rapid traverse rate X/Y/Z: 60.00 m/min Tool magazine: 90 tools EQUIPMENT Number of axes: 4 Pallet changer (RS4) with 6 positions Coolant system with internal coolant supply at 40 bar Chain magazine: 90 tool positions Chip conveyor Tool laser measurement system BLUM Electronic handwheel MACHINE DETAILS Total power requirement: 65.00 kW Drive power 40% duty cycle: 20.00 kW Drive power 100% duty cycle: 13.00 kW Machine weight: approx. 16.00 t Space requirement: approx. 9.00 x 4.50 x 3.50 m

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: Matsuura G-tech (Fanuc), controller model: 16i, workpiece height (max.): 750 mm, workpiece diameter (max.): 650 mm, workpiece weight (max.): 400 kg, total height: 2,635 mm, total length: 5,870 mm, total width: 3,440 mm, table width: 500 mm, table length: 500 mm, table load: 400 kg, overall weight: 13,700 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 25 bar, number of slots in tool magazine: 240, Equipment: chip conveyor, documentation/manual, We are pleased to offer this well-maintained Matsuura H-Plus 405 with pallet pool. This is a highly compact machine with extensive machining capabilities and 240 tool positions in the magazine. The machine was manufactured in 2004 and is equipped with the Matsuura G-Tech 16i (Fanuc 16i) control system. Technical specifications: Table dimensions: 500 x 500 mm Number of pallets: 6 Table load capacity: 400 kg X-axis travel: 600 mm Dwsdpfx Aioz Rmk Tjded Y-axis travel: 600 mm Z-axis travel: 600 mm Table indexing: 0.001° Spindle mount: Mas BT40 Big Plus Spindle speed: 50 – 15,0001 rpm Spindle motor: 22/18.5 kW Magazine capacity: 240 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: like new (used), Year of construction: 2019, functionality: fully functional, HORIZONTAL MACHINING CENTER MAZAK HCN 5000 cnc Smooth G MACHINE COMPLETE WITH A 6-STATION PALLETECH SYSTEM AND A LOADING/UNLOADING UNIT RENISHAW OMP60 Control unit: SMOOTH G X-axis: 730 mm Y-axis: 730 mm Djdpfx Aioz Iw Ezodowd Z-axis: 800 mm Table length: 500 Table width: 500 Maximum workpiece dimensions (length x width x height): D.800x1000 Table surface with threaded holes Maximum workpiece weight: 700 kg Spindle speed: 18000 rpm Spindle connection: ISO 40 Torque (continuous / 10 min): 168 NM Number of tools: 120 Pressure: 15 bar, preparation: 70 bar PALLET size: 500x500

Condition: used, functionality: fully functional, 1. Machine specifications * Pallet changer with 6 pallets - Clamping area: 4 x 800 x 800 mm 2 x 800 x 1000 mm - Max. clamping weight: 2000 kg - Interference circle: D = 1200 mm Djdpfxoz H Tqds Aidewd - Changeover time: 35 sec. * Travel ranges - Workpiece (x): 1140 mm - Support vertical adjustment (y): 910 mm - Column transverse adjustment (z): 875 mm * Max. feed force: 20,000 N * Rapid traverse: 24 m/min * Working spindle - tool holder - SK 50 DIN - Drive power 100/40 % duty cycle: 22/32 kW - Torque 100/40 % duty cycle: 720/1040 Nm - Speed range, stepless: 20 ... 6000 rpm * Coolant supply through the spindle center: 10 bar * Tool magazine (cassette): 186 positions - Average chip-to-chip time: 11 sec. * Control system: Siemens 840C * Work area protection 2. Year of manufacture: 1995 The machine was only used in production until February 2011!!! 3. Warranty: none 4. Prices: * Machine: €30,000.00 5. Delivery conditions: * Payment terms: 100% before collection * Delivery date: ex-stock

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, Year of manufacture: 2012 Control system: Siemens 840D SL Spindle: SC63, 16,000 rpm, 40 kW, 96 Nm Tool clamping system: HSK 63 Tool magazine / positions (options): Chain / 54 Rotary table: 360,000° x 0.001° Coolant system: KNOLL, VRF 250, IKZ 50 bar, (work area flushing) Dwjdpfxozpyg Ts Aidjd Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Workpiece clamping: Hydraulic, 60 bar Additional options, special features: Infrared receiver for measuring probe (RENISHAW); SBBK; Pneumatic support control at the workpiece setup station; Status indicator light; Chip conveyor for wet machining;

Condition: good (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazatrol, controller model: Fusion 640M, workpiece height (max.): 710 mm, workpiece diameter (max.): 730 mm, workpiece weight (max.): 500 kg, total height: 3,050 mm, total length: 10,145 mm, total width: 9,850 mm, table width: 500 mm, table length: 500 mm, table load: 500 kg, overall weight: 11,600 kg, spindle speed (min.): 30 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 15 bar, spindle motor power: 30 W, number of spindles: 1, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, We are pleased to offer this Mazak FH 5800 with the Mazak Palletech system. This machine was manufactured in 2001 and is fitted with the Mazatrol Fusion 640M control system. It is a robust and precise machine, suitable for efficient machining and batch production. Thanks to the horizontal spindle and pallet configuration, the machine is suitable for versatile machining operations and high productivity. The Mazak Palletech automation system enables more efficient and unmanned production. Technical specifications: Table dimensions: 500 x 500 mm Number of pallets: 10 Table load capacity: 500 kg X-axis travel: 710 mm Djdpsz Rmq Tjfx Aidjwd Y-axis travel: 610 mm Z-axis travel: 660 mm Table indexing: 360° in 1° increments Spindle mount: DIN 69871A/40 Spindle speed: 35 – 15,000 rpm Spindle motor: 30/22 kW Magazine capacity: 120 positions We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: used, Year of construction: 2006, operating hours: 45,559 h, functionality: fully functional, machine/vehicle number: 183519, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, workpiece length (max.): 1,000 mm, workpiece width (max.): 800 mm, overall weight: 11,350 kg, - Year of manufacture: 2006 - Worktable: pallet size 500 x 500 mm - Workpiece dimensions: max. 800 x 1000 mm - Travels: X 730 mm / Y 730 mm / Z 740 mm - Spindle diameter: 215 mm - Control: Mazatrol PC Fusion CNC 640M - Feed rate: 1 – 60,000 mm/min Dwedpfx Asylh R Tsidsd - Rapid traverse (X, Y, Z): max. 60 m/min - Speed range (2 steps): 35 – 12,000 rpm - Internal coolant supply – 70 bar - Renishaw measuring probe - Chip conveyor - Tool magazine: equipped with 160 slots + approx. 60 additional tools - Palletech high-bay system: 16 pallets + 2 loading stations - Machine hours: 45,559 h - Machine weight: approx. 11,350 kg - Serial no. 183519 Net price excluding dismantling and unloaded ex-works Luckenwalde (Germany), without transport

Condition: excellent (used), Year of construction: 2011, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 565 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, total height: 2,700 mm, total length: 4,000 mm, total width: 2,400 mm, table width: 400 mm, table length: 400 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 6,383 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Offered here is a horizontal machining center from the manufacturer Doosan. Operating hours: 11,320 h Spindle hours: 6,383 h The machine is in very good condition and can be inspected under power in our facility. Both clamping towers are included in the scope of delivery. Manufacturer: Doosan Model: HC 400 Year of manufacture: 2011 Control: Fanuc Series 32i-MODEL A Technical data: Travel X-Y-Z: 600x560x565 mm B-axis: 1° increment (indexing table) Rapid traverse X-Y-Z: 40 m/min Feed rates: 20,000 mm/min Pallet size: 400x400 mm Dwedsyl Iu Eepfx Aidod Spindle speed: 8,000 rpm Tool holder: SK40 Machine weight: 11,000 kg