Used Hot Melt Systems for sale (35,578)

Year of construction: 2017, condition: excellent (used), HIGHLY AUTOMATED, MODULAR SYSTEM FOR DIGITAL BOOK PRODUCTION ("BOOK ON DEMAND") AND SHORT RUNS – TECNAU LIBRA 800 Intended Use: Suitable for the conversion and processing of short runs and single copies ("books of one") with variable sizes, page counts, and covers. Performance: from print run 1; up to 800 copies per hour Book Format: min. 100 x 125 mm / max. A4 Thickness: min. 2 mm / max. 60 mm Equipment / Further Details: Line Configuration: 1.Roll-to-Stack Feed: Unwinder, merger, Dupla cutter, and book assembly station for the production of book blocks with 2-up printing. 2.Sheet Feeder: A variable number of loose sheets can be added as inserts to the book block. The sheets must have the same size and print run as the book block being processed. Kdsdpjylyhdjfx Aayek 3.Infeed to Binder: Manual feeding station for pre-fabricated book blocks, conveyor with scanning station, book turnover module, and robotic loader at the binder. 4.Variable Binder: For the production of softcover books. The binder is equipped with PUR for the spine and hot-melt glue for the side gluing. 5.Softcover Cover Feeder: Configured with a sheet cover feeder; pre-printed covers are fed, trimmed at the front, side-trimmed, and creased to the exact thickness of the corresponding book block. 6. Cooling tower/cooling screw (product-specific) not included - can be ordered according to customer requirements (product type). The cooling belt can be configured according to the available space and requirements at the machine's installation site. The price of the belt depends on the configuration. We would be happy to advise you on selecting the right belt. 7.Variable Three-Knife Trimmer: Suitable for trimming books with variable dimensions in three axes and different cover types. 8.System Control Software Finishing Line The entire process is controlled via 2D Data Matrix codes. Through the code, the system receives authorization for the following automatic settings and workflow control: • Information on book dimensions and inserts (quantity and sequence) • Binder setup (spine position, thickness, and length) • Cover preparation: Softcover → creasing, cutting, edge trimming • Correct book-to-cover matching • Three-knife trimmer (blade positioning is automatically adjusted to the book dimensions) Very good condition // Dismantling, packaging of the machine and securing (insurance of the machine during transport) will be done by the manufacturer / Tecnau.

Condition: good (used), Baier Geba Hot Stamping Press This machine is in very good condition and ready to use. This machine is from the popular hot stamping manufacturer Gebrüder Baier KG, manufactured in Germany. Description The Baier Geba hot stamping press is a press for hot stamping, embossing, and die-cutting paper and plastics. It’s a useful device in any advertising agency or digital printing house. The manually operated pressure is powered by only 230V. A powerful pressure with adjustable pressure ensures repeatability and very high pressure of the die against the material. The machine features a worktop with a slide-out function, adjustable embossing depth, and a heating plate with a thermostat. Specifications: Heating temperature control Kjdpfey Ah I Uox Aayjdk Heating plate pressure mechanism: mechanical Press force: 5000 kg Power consumption: 9000 W Power supply: 230 V Machine weight: 300 kg Plate size: 32 x 21 cm.

Condition: good (used), Heidelberg Cylinder KSB 40×57 Hot Stamping Machine A very rare model on the market. The machine is ready for operation and in very good condition. After inspection. Factory-installed new hot stamping unit. Suitable for die-cutting. Central lubrication. Format 40x57cm Kdsdpfxoy Ah Ibs Aayjk Weight 3500kg 380V power supply Includes additional components, fillers, and letterpress locks.

Year of construction: 2026, condition: new, Modular compact press feeding solutions including decoiler, straightener feeder and integrated decoiler-straightener systems. Bosporas Machinery is a manufacturer of coil processing, press feeding and roll forming systems, delivering high-performance and customized industrial solutions worldwide. Our compact press feeding systems are designed for efficient coil feeding, material straightening and press automation in a wide range of industrial applications. These systems can be supplied as complete compact lines or as standalone units for modernization and retrofit projects. Whether for new production investments or upgrading existing equipment, we provide flexible solutions including decoilers, servo feeders, straightener feeders and integrated decoiler-straightener machines. ⚙️ AVAILABLE SOLUTIONS Compact Press Feeding Lines Complete systems including: Decoiler Straightening Servo Feeder Press Integration Automation System Standalone Machines: Decoilers Servo Feeders Straightening Servo Feeders Decoiler-Straightener Machines Press Feeding Units 🔧 SERIES OPTIONS The compact systems are available in three performance classes: L Series – Low Capacity Solutions M Series – Medium Capacity Solutions H Series – Heavy Duty Solutions Capacity, coil width and configuration are customized according to customer requirements. ⚙️ ENGINEERING FEATURES Compact space-saving design Servo motor controlled feeding systems Accurate feeding and synchronization with press operations Straightening system for improved material flatness Integrated automation system (PLC & HMI) Modular design for future upgrades Retrofit compatibility for existing production lines ⚡ OPERATIONAL ADVANTAGES Complete turnkey press feeding solutions Ideal for new investments and line modernization Reduced downtime and improved productivity Flexible machine combinations Easy installation and operator-friendly use Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Press shops Metal stamping production Roll forming pre-feeding systems Kodpfxoy Ak Iqo Aayodk Automotive suppliers White goods industry General sheet metal processing 🧩 OPTIONAL CONFIGURATIONS Press included turnkey solutions Custom decoiler capacities Different feeder widths and thickness ranges Automation upgrades Tailor-made engineering solutions 📸 REFERENCE PROJECTS Images included in this listing show different compact press feeding configurations successfully manufactured and commissioned for various countries and industrial applications. Additional references and technical details can be provided upon request.

Condition: used, Year of construction: 2006, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, intake vacuum (max.): 2,400 mbar, suction capacity: 6,000 m³/h, intake manifold diameter: 300 mm, filter area: 30 m², total height: 2,350 mm, total length: 3,000 mm, total width: 1,100 mm, overall weight: 900 kg, Dust extractor, chip extractor, self-cleaning pneumatic vacuum filter Alko Mobil Power JET 300 The filter is pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. The fan is mounted on the clean air side, minimizing the risk of explosion. Ideally suited for wide belt sanders and all types of dry dust generated in various technological processes. Fan power: 7.5 kW Capacity: 6000 m3/h Vacuum: 2400 Pa Connection diameter: 300 mm Air return Kjdpfsy A Iwcox Aayedk Stock number: 1130

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, BAYKAL Laser Cutting Machine Systems: BLE PRO, Compact and flexible set-up... BLE PRO is BAYKAL's Fiber Laser Cutting machine with 1500 millimeters by 3000 millimeters dimensions and 1 kilowatt to 6 kilowatts power supply options. For BLE PRO Laser source, IPG (YLR and YLS series), nLight, Max Photonics brands are among the options. Ksdpert Ht Usfx Aaysdk

Condition: ready for operation (used), Bridge Lifting Power Unit,Structural lifting system,Hydraulic lifting unit, 1000-ton hydraulic cylinder, Used Machine Manufacturer: Bucher Hydraulics Type: QX24-008R ; PHHET Overall dimensions: Width: 1420 mm Depth: 860 mm Height: 1770 mm Operating pressure: 350 bar Year of manufacture: 2017 Weight: 850 kg Electrical data: 400 V; 11 kW; 20 A Hydraulic Cylinders: 1. Overall dimensions: 900 x 900 x 485 mm Weight: 1400 kg Kedpoyr Ihrjfx Aayodk Manufacturer: Schiess Defries Operating pressure: 450 bar Load capacity: 1000 tons Diameter: 710 mm 2. Overall dimensions: 900 x 900 x 485 mm Weight: 1400 kg Manufacturer: Schiess Defries Operating pressure: 450 bar Load capacity: 1000 tons Diameter: 710 mm

Condition: used, machine/vehicle number: 006621, Max. panel width: 1500 mm Max. panel length: 2200 mm Length of conveyor: 13500 mm Ksdpfx Aastvrfgeyodk Panel return for edgebander: Left

Condition: used, machine/vehicle number: 008106, Max. panel width: 900 mm Max. panel length: 2500 mm Panel return for edgebander: Right Kedpfx Aey Dq Hcsayodk

Condition: excellent (used), I am offering a professional BÜHNEN 6040 adhesive application unit, designed for industrial adhesive application (e.g. hot-melt). The device is used, in good technical condition, with normal signs of wear and tear. Reliable German-made equipment – ideal for manufacturing plants, packaging, carpentry, upholstery, etc. ⚙️ Technical data (from the nameplate / visible in the photos) Power supply: 230V / 50 Hz Power: 235 W Max. pressure: up to 160 bar Max. temperature: up to 200°C Model: 6040 Manufacturer: BÜHNEN GmbH (Germany) 📦 Included in the set: ✔️ BÜHNEN 6040 glue application unit ✔️ 4 heated hoses (complete set) ✔️ Cables / connectors as shown in the photos ✔️ Control and connection elements 🔍 Technical condition: used device Kdjdsy Aagijpfx Aayok visually normal signs of use no visible mechanical damage interior of the tank visible in the photos sold exactly as pictured

Year of construction: 2000, condition: excellent (used), machine/vehicle number: 12086, COVER LABELING SYSTEM SCHLEUTER GU 2 DU WITH CIRCULAR STATION FOR PLACING SPOONS RNA SRC-N-630-1R Performance: 60 lids per minute Consists of: - Stacker - Circular station for placing spoons - Labeling unit Kjdpfxen Awh Us Aaysdk - Stapler

Condition: excellent (used), HUNKELER POST-PROCESSING SYSTEM (unwinding, punching, turning, rewinding) The line consists of: Position 1: UNWINDER HUNKELER UW4 G 7119 (M. No.: 659595 // Age: 2001) Position 2: CROSS and LENGTH CUTTER HUNKELER AM 520-W 7150 (M.No.: 1509697 // Age: 2004) Kdsdjxphnljpfx Aaysk Position 3: TRANSFER STATION HUNKELER PU 520-W 7150 (M.No.: 2010062 // Age: 2008) Position 4: PUNCHING & PERFORATING UNIT HUNKELER DM 520-W 7152 (M.No.: 1509697 // Age: 2004) Position 5: TURNER HUNKELER WM 520-W (M.No.: 1509697 // Age: 2004) Position 6: CUTTER (TRANSVERSE and LENGTHWISE)HUNKELER CU 520-W 7154 (M.No.: 1509697 // Age: 2004) Position 7: CRISS CROSS DELIVERY ERTEC STSC-2 (S.No.: 34 // Age: 2008) Position 7.1: Brand new (never used) FOLDING UNIT FS4 7127 (M.No.: 1509697 // Age: 2004), can be used instead of the display Position 8: CRANE

Condition: excellent (used), machine/vehicle number: 46131, Stamping surface with heating head: HKAC max. 100 x 125 mm // HKBC max. 140 x 230 mm Stamping pressure at 6,5 bar with: 1 Zylinder ca 400 daN (kp) // 2 Zylinder ca 800 daN (kp) Readjustable stroke, dep. on pressure producer: 0-40 mm / 0-100 mm Max. passage height without/with sliding table: 300 mm / 275 mm Readjustable foil advance: 0-230 mm Max. foil width: 140 mm Heating voltage: 220 V / 50 Hz Heating capacity with heating head: HKAC 540 W // HKBC 900 W Temperature measurement by means of: Fe-Ko Kdjdpfox I Nfrjx Aayok Max. output, hourly cycles: ca 4000

Condition: excellent (used), THERMAL TRANSFER PRINTING SYSTEM WITH PUNCH Ksdpfx Aovf Ig Doayodk (printing, laminating, punching) Equipment / Additional information: Car inspection stickers were last produced

Year of construction: 2000, condition: excellent (used), machine/vehicle number: 12087, COVER LABELING SYSTEM SCHLEUTER GU 2 DO WITH 2xSTATIONS FOR PLACING SPOONS Performance: 90 lids per minute (spoon inserted diagonally) Consists of: - Stacker Kdedpfx Aen Awndeayok - 2xStations for placing spoons - Labeling unit - Delivery station

Condition: excellent (used), COVER LABELING SYSTEM (Zweckform with Schleuter label dispenser) Age : ca. 1990 Performance: 100 cups/lids per minute Equipment / Additional information: Kdodpfx Aen D E Hpsayok Consists of: - Stacker - Labeling unit - Stapler

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 02048020376, Incl. ROLL UNWINDER HUNKELER RW4-HS 7121 (M. No.: 1509697 // Age: 2004) With transfer station LCM 7084 (M. No.: 659595/2 // Age: 2001) Kdjdpsxmiqiofx Aayek

Year of construction: 2007, condition: excellent (used), machine/vehicle number: 20051619, Basic Functions: Slit, Cross cut, Crease In-feed paper size: 210(W)x210(L) to 370(W)x520(L)mm Minimum finished size: 55(W)x45(L)mm Paper weight: 120 to 400gsm *Depending on paper quality Operation: 4" Touch Screen Job memories: 263 preset jobs & 150 customized job memories. (100 MANU SET + 50 FLEX MODE) Feeding mechanism Upper belt tri-suction suction feed (Patented) Side blower Skew adjustment Side aligner Double feed detection Cut mark registration Feed tray stacking capacity: 100mm Speed 8.8 sheets / min. : SRA3 21up business card Kedpshii Swsfx Aayjdk 11 sheets / min. : SRA3 8up post card 12.2 sheets / min. : SRA3 4up greeting card 15.4 sheets / min. : A4 2 cuts & 1 crease

Condition: new, Year of construction: 2026, Special Offer: TruMark Station 3000 Maximum productivity, minimal footprint: Compact industrial solution for precise laser marking. Take advantage of our special offer now: TruMark Station 3000 package for only €24,950!* Get started with the ideal marking solution! The TruMark Station 3000 is a compact marking solution designed for precise laser marking of small to medium batch sizes. Small footprint, large working area: - TruMark Station 3000 equipped with electric door and motorized Z-axis - Suitable for workpieces up to 440 × 200 × 350 mm (W × H × D) Ksdpfxeykvr Aj Aayodk - The One-Box Laser TruMark 5010 is supplied with an extraction unit Versatile applications: Whether annealing, engraving, or ablation – mark a wide variety of metals and plastics. The package includes a fixed configuration of the TruMark Station 3000 with the One-Box Laser TruMark 5010. * TruMark Station 3000 package valid until April 28, 2026. TruMark Station 3000 Workstation dimensions (W × H × D): 625 × 730 × 672 mm Electrical connection (voltage, frequency, current): 230 V, 50 Hz, 16 A Extraction unit: Type KKF 300 L Laser safety class: 1 TruMark 5010 Average power: 20 W Wavelength: 1062 nm Min. focus diameter: 40 μm Max. internal focus adjustment: 10 mm Marking field: 110 × 110 mm Focus finder, navigator: Yes

Condition: not inspected (used), functionality: unexamined, overall weight: 1,000 kg, total length: 5,000 mm, total width: 1,200 mm, total height: 1,800 mm, conveyor belt width: 300 mm, No reserve price – guaranteed sale to the highest bidder! Bidding commits you to timely collection between 23/06/2026 and 26/06/2026! Auction of a conveyor system with three units: Lifting system with container Vibratory feeder bowl Conveyor belt TECHNICAL DETAILS Lifting system container dimensions: 600 mm x 500 mm Vibratory feeder bowl diameter: 1,200 mm Conveyor belt width: 300 mm MACHINE DETAILS Kdjdey D Tmljpfx Aaysk Dimensions & Weight Dimensions (L x W x H): 5,000 x 1,200 x 1,800 mm Weight: 1,000 kg External reference: 65

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 23352279, type of input current: three-phase, input voltage: 400 V, total width: 600 mm, total length: 1,600 mm, total height: 2,150 mm, overall weight: 460 kg, power: 5.5 kW (7.48 HP), compressed air connection: 6 bar, Equipment: documentation/manual, type plate available, SICK MCS 100FT/F CEMS System (2023) - Unused / Zero Hours - QAL1 Certified Available for immediate sale: A complete, unused (zero hours) Continuous Emission Monitoring System (CEMS) SICK MCS 100FT/F, manufactured in October 2023. This is a turn-key solution featuring advanced multi-component analysis technology. Key Technical Specifications: - FTIR Technology: Simultaneous measurement of SO2, NO, NO2, CO, CO2, HCl, HF, and H2O - FID (TOC) Analyzer: Integrated total organic carbon measurement - Zirconia Sensor: Integrated O2 measurement - Certification: Fully QAL1 certified (EN 15267 compliant) - Acid Mist Protection: Includes special cabinet with Acid Mist Absorber Box (ideal for H2SO4 protection during petcoke combustion) Kdedpey A Nu Asfx Aayok Complete Package Includes: - SICK MCS 100FT/F Analyzer Cabinet - Sampling Probe - 20m Heated Sampling Line - MEAC/DAU Data Acquisition System Condition: Brand New / Unused Availability: Immediate (Ex-stock) Ideal for cement and lime plants, refineries, and power generation facilities looking for a high-end upgrade without the manufacturer's lead time. FAT reports and technical manuals are available upon request.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Y5061080272, total width: 500 mm, total length: 600 mm, total height: 600 mm, overall weight: 20 kg, No reserve price – guaranteed sale to the highest bidder! Kdodpfsy D R D Ujx Aayok Placing a bid commits you to timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Lens diameter: 120 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 600 x 500 x 600 mm Machine weight: 20 kg External reference: 58

Condition: excellent (used), functionality: fully functional, Max. air flow rate: 800 m³/h Max. negative pressure: 1,800 Pa Suction connection: 150 mm Kodpfx Ajy Dtn Njayedk Suction connection height: 300 mm Drive power: 1.10 kW Connection voltage: 220 / 380 volts (4.33 / 2.5 amps) Dimensions (L/W/H): 610 x 740 x 1,150 mm Total depth: 670 V Sound pressure level: 72 dB(A) Weight: 70 kg • Includes flexible suction arm • Suitable for almost all types of dust • Cleanable, durable bag filter

Condition: used, Year of construction: 2016, Automatic Cutting Table System for Textile and Leather Manufacturer: Atom Kodpfxoyf Egxo Aayjdk Model: FlashCut 2H 1660B UP Year of manufacture: 2016 CNC control Working area: 1,540 x 1,200 mm Cutting window: 1,540 x 600 mm Maximum cutting height: 20 mm Maximum traverse speed: 80 m/min Maximum acceleration: 1G Vacuum power: 1 – 8 kW Connected load: 5.5 kW 380 Volt, 3 phase, 50 Hz Compressed air requirement: 6 bar, 200 l/min (when using pneumatic tool inserts) 9 bar, 400 l/min Equipped with 2 independent multi-tool heads, each comprising: Tool module for all tooling inserts Pen module for marking 2 punching tubes with different diameters Minimum diameter: 1 mm Maximum diameter: 8 mm One needle Continuous conveyor belt (transports material into the working zones) Vacuum table: divided into 300 x 300 mm squares High-performance vacuum turbine with frequency control, up to 1 – 8 kW High-brightness projector Servo drive for X, Y and Z axes Safety system with light curtain monitoring and emergency stop switch Machine dimensions: 2,210 x 2,506 x 1,841 mm Weight: 1,630 kg

Condition: good (used), Year of construction: 2018, Burning-Drilling Machine Plate Processing Center Manufacturer: Vernet-Behringer Model: MAG EVO 420 Year of manufacture: 2018 CNC Control Power Source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm automatic turret Tool holder: 14 Motor power: 16 kW Drilling diameter: 5 - 40 mm V-Scoring marking: 5 to 40 mm Sheet dimensions min.: 1,500 x 300 mm (750 x 400 mm with restriction) Minimum finished part dimensions: 80 x 80 mm Max. sheet weight: 2,600 kg and 650 kg/m Infeed side: Roller conveyor for flat steel and plates: 4,000 x 2,000 mm Zero-position cross conveyor Number of trolleys: 2 clamps NC feed carriage, side positioned 4 clamping tongs (2+2) 3 short-stroke cross conveyors Working height: 1,000 mm Outfeed side: Outfeed roller conveyor with lowering discharge table and chute into material collection bin for unloading small parts. Filter unit including piping Kjdevzrczspfx Aayodk High-performance for use with carbide tools. For drilling, tapping, marking, milling, plasma cutting of flat steel and sheet metal. Software options for milling and V-scoring/marking LANTEK license Ref. no.: ä16426 Availability: immediately!