Used Hot Melt Systems for sale (39,483)

Condition: excellent (used), This machine was filling capsules and tablets into small tubs. The whole line is also available. Itjdpfx Aexm S Hmedweb Bottles are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1

Condition: used, Year of construction: 2016, Overview  This inspection system was manufactured in 2016 by FT System (Italy). The machine is still in operation in Spain and can be visited in person. It is available due to changes in the production process and is no longer needed by the current owner. Technical data  Capacity: 8,000 bph Formats: 0.75 L bottles Functions: Neck inspection, wall inspection, bottom inspection, washing liquid residue detection Dimensions: 318 × 152 × 235 cm Weight: 1,022 kg Scope of Delivery  Main bottle bottom inspection module Mouth integrity control Wall inspection Washing liquid residue detection Push expulsion Progressive expulsion CIP Astigarraga   Itodpfx Aoxfcciedwob

Year of construction: 1988, condition: good (used), Bucket sealer Make: Soft Electronic Systems Type: Semi-automatic bucket sealer Isdpfxeigyp He Adwjtb Model: PMS 2 GH Capacity: Up to 300 buckets per hour Frame: Stainless steel Range: Buckets up to D = 300mm Dimensions: L x B x H = 1.000 x 900 x 1.000 mm Weight: 150 Kg Power supply: 380 Volt – 50 Hz – 1,5 kW Comp. Air: > 5.5 Bar Features: manually positioning of bucket automatic seal process (adjustable time) automatic sliding towards cutting device automatic pushing and rotating knife manually reeling up the film manually removing of bucket

Condition: excellent (used), operating hours: 2,658 h, functionality: fully functional, pressing force: 71 t, filling opening width: 1,000 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, input current: 200 A, oil tank capacity: 1,250 l, empty load weight: 29,000 kg, Technical data baler: Manufacturer BOA Recycling Systems B.V. Itsdpfxsu Thcvj Adwjb Type M75-45-A-5-1.6 Ecoline Year of construction 2021 Hours of operation 2,658 hours (as of May 2024) Number of pressed bales 42,212 pieces (as of May 2024) Press power main press 71,2 kN (71 t) Specific press capacity 9 kg/cm² Operating pressure 280 bar Cylinder stroke 2,200 mm Feed channel 1,620 x 1,000 mm Capacity per cycle time 2,4 m³ Theoretic cycle time 21 seconds Theoretic throughput rate 450 m³/hour Bale size 1,100 x 720 mm, length variably adjustable up to 1,400 mm Driving motor 45 kW Connected load 100 kW Current consumption 200 A Tying system 5-fold vertical, fully automatic, the press stamp is prepared for an additional 3-fold horizontal binding Throughput rate at a bulk weight of 30 kg/cbm approx. 13,6 tons/hour bulk weight of 50 kg/cbm approx. 24,2 tons/hour bulk weight of 100 kg/cbm approx. 36,4 tons/hour bulk weight of 150 kg/cbm approx. 54,7 tons/hour Bale weight up to 600 kg, depends on material Volume hydraulic oil tank 1,250 l SPS controller Siemens S7 1500 Operating panel Siemens SIMATIC HMI TOUCH Transport dimensions of press 10,000 x 2,800 x 3,385 mm (l x w x h) Press height set up with feed chute 4,743 mm Press height with conveyor belt 7,123 mm Machine weight baler approx. 29 tons Noise level <85 dB (A) Condition of the baler: With 2,658 operating hours, the press is almost as good as new and in very good condition, has hardly any signs of wear and is ready for immediate use. Due to larger material input quantities, the pressing force and throughput of the machine no longer meet the customer's current requirements and is therefore being replaced by a new 120 tonne baler. Only the baler is for sale, without conveyor belt and wire drawing stations. Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2016, Used Filling Monoblock MITSUBISHI up to 39000 BPH It is extremely important to note that this machine is complementary to it’s rinsing machine: (click here). The Filling Monoblock Mitsubishi offers an advanced solution in the bottling sector. Specifically designed to handle a wide range of liquids, it boasts a capacity of up to 39,000 BPH. Technical Specifications of Model FHRJ80M Mitsubishi Heavy Industries Mechatronics Systems Ltd manufactured the FHRJ80M model in 2016 to meet the growing demands for speed and precision in bottling. Equipped with 80 valves, this weight-based filling system accurately doses products, significantly minimizing waste. Moreover, the system fills aluminum bottles in various sizes ranging from 0.29L to 0.41L. Thus, it showcases its versatility for handling different types of liquids such as coffee (last product that has been filled by this monoblock), liquid soap, oil, and spirits. Ijdpfevgvlkox Adwetb Bottling and Capping Features Furthermore, the Mitsubishi FHRJ80M monoblock integrates a capping function with 24 heads, accommodating aluminum screw caps of 28 mm and 38 mm. Its clockwise rotation direction eases integration into existing production lines. Additionally, the precision in cap placement and swift execution ensure the process’s efficiency, which is crucial for preserving product integrity and container safety during transport and storage. Storage and Maintenance Currently stored in a warehouse, the Filling Monoblock Mitsubishi remains in excellent condition to ensure its functionality and readiness. Also, the availability of instruction manuals aids in maintenance and repair operations, which are essential for extending the machine’s lifespan and maintaining optimal performance. Integrated safety features protect operators and the machinery, thereby reducing accident risks during operation. Conclusions of the Filling Monoblock Mitsubishi Finally, the used Mitsubishi FHRJ80M filling monoblock serves as an optimal solution for those seeking efficiency and reliability in the bottling industry. Its adaptability to various formats and product types, along with the precision of its filling and capping system, make it ideal for a broad range of industrial applications. With proper maintenance and careful management, this monoblock can deliver high performance, significantly enhancing production process optimization. This model not only meets but also exceeds industry expectations in terms of functionality and performance.

Condition: used, Year of construction: 2016, Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph Iodpfx Adovgvhxowjtb It is extremely important to note that this machine is complementary to it’s filling monoblock: (click here). Introduction to the Used Rinsing Machine MITSUBISHI This rinsing machine serves as an advanced solution for the bottling industry. Specifically, Mitsubishi Heavy Industries Mechatronics Systems Ltd. manufactures this 2016 model RNR100H machine to ensure effective cleaning of aluminum bottles. Consequently, it addresses the critical need for efficient and reliable rinsing processes in high-demand production environments. Operational Capacity and Speed The RNR100H operates at an impressive capacity of 39,000 bottles per hour, making it ideal for high-speed production lines. Additionally, the machine handles aluminum bottles in various formats, including 0.29L, 0.3L, 0.31L, 0.4L, and 0.41L, thereby adapting to specific production needs. Moreover, the grippers rotate clockwise, which optimizes workflow and significantly enhances the rinsing process’s efficiency. As a result, manufacturers can achieve higher throughput without compromising on quality. Gripper System and Double Treatment Furthermore, the  Rinsing Machine MITSUBISHI  features 100 grippers, allowing it to treat numerous bottles simultaneously. This double treatment system involves two distinct phases: firstly, the machine uses water containing hypochlorous acid for effective disinfection. Subsequently, the second phase employs pure water to ensure the complete removal of chemical residues. Therefore, this dual-step approach guarantees thorough cleaning and minimizes the risk of contamination. Compatibility with Filling Machines A crucial technical aspect of the RNR100H lies in its compatibility with various filling machines. Specifically, the filling machines must have a corresponding height between 120 and 200 mm and a diameter between 50 and 80 mm. These parameters ensure optimal integration with existing production lines, thereby reducing adaptation times and enhancing operational continuity. Consequently, manufacturers can seamlessly incorporate the rinsing machine into their workflow without significant downtime. Mechanical Structure and Maintenance Moreover, the mechanical structure of the Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph guarantees durability and reliability. The machine’s components, made from high-quality materials, resist corrosion and wear, ensuring a long operational life even in intensive production environments. Additionally, the modular design facilitates preventive maintenance, allowing for the rapid replacement of worn parts. As a result, downtime is minimized, and maintenance costs are effectively controlled. Energy Efficiency Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph From an energy perspective, the RNR100H optimizes energy usage to reduce consumption without compromising performance.

Condition: good (used), functionality: fully functional, roll width: 410 mm, power: 0.12 kW (0.16 HP), roll spacing: 60 mm, axle spacing: 110 mm, drive type: Motorisiert, Roller conveyor curve/ curve 90 degrees Manufacturer: Soco System Condition: Used Model: Rollers Type: 90°degree Total width outside: approx. 1430 mm Total width inside: approx. 820 mm Total width incl. motor: approx. 580 mm Conveyor width: approx. 410 mm Roller spacing: approx. 60 mm Center distance: approx. 110 mm Roller type: Plastic Ijdsttcp Sopfx Adwstb Material: Steel/plastic Color: Galvanized, light grey, orange Including 2 motors Soco 0.12 KW In stock: 4 pieces Price per piece The conveyor technology has run until dismantling. Condition: fully functional, with signs of use Ideal for fast material transport Pick-up address: Industriestraße 5 (47918 Tönisvorst) Expertly dismantled and packaged Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under heavy loads. Customized solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods! We will be happy to provide you with an individual quotation or advise you on the design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of sectors, such as logistics, the pharmaceutical industry, trade or Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable manner. We can even offer you fully automated sorting technology or supplementary components such as order picking racks or containers.

Condition: used, Year of construction: 2020, Monoblock for rinsing, filling and capping glass bottles. 1. Rinser: Rinsing tower with 6 grippers for single-stage rinsing of empty bottles. 2. Filler: Filling tower with 6 electro-pneumatic backpressure valves. 3. Capping machine: Stainless steel cap container with cap conveyor and capping head 4. Bottle exterior washer Additional title: Counterpressure filler with 6 filling valves, sealer with one sealing head Capacity: 1100 bo/h referring to 0,33 l bottles Filling temperature: 2 °C Length: 2,20 m Width: 1,90 m Height: 2,10 m Formats: Euro 0.5 l and 0.33 l; 26 mm crown caps Running direction: clockwise Operation / Control: Schneider Electric Base construction: Monobloc; Stainless steel housing on feet with plexiglass doors Features: Rinser with 6 grippers, filler with 6 filling valves, capper with one capping head, bottle exterior washer, beer pump, free bottle transport Ijdpfow Tbgdex Adwjtb

Condition: used, Year of construction: 2020, Cold glue labelling machine for wrap-around labelling of glass bottles. The glue is applied to the bottle in horizontal strips. A roller affixes the labels to the bottle. Additional title: cold glue labeling Capacity up to: 6000 bo/h for cylindrical glass bottles Max. label length: 285 mm Formats: Euro 0.5 l and 0.33 l; wrap-around labels Operation / Control: control panel on machine side Base construction: Stainless steel housing on feet with plexiglass doors Itsdpfx Adjw Ta Rhswob Features: Label magazine, 2.5 m motorised bottle conveyor belt, pneumatic glue pump, control panel on the side of the machine

Condition: new, Year of construction: 2025, functionality: fully functional, Drying Centrifuge Model ERFOR® CR8 Component device for recycling washing lines ♻️ ♻️ ♻️ The machine is designed for drying plastics—both soft and hard—including: films such as LLDPE, LDPE, HDPE, PP, PVC, PS, PA, post-agricultural films, agro-fibre, shredded big bags, PP sacks, fishing nets, peat packaging, and many more. Itodsuql Rtjpfx Adwob Drying centrifuges Model - CR8 55/75 Motor power [kW] - 55/75 kW Film drying capacity [kg/h] - 1500/2000 Dimensions (L*W*H) (mm): 1970*2800*2060 / 2100*3150*1900 Ground material drying capacity [kg/h] - 5000 Our offer also includes: Complete plastic recycling systems DWFS® washing lines Granulation and extrusion lines For more information, please visit our website.

Year of construction: 2025, condition: new, The Zig-Zag Air Separator by Koltex Plastic Recycling Systems enables efficient separation of bulk materials into fractions with different densities. The material to be separated is fed into the device via a rotary valve, ensuring even distribution across the entire cross-section of the separation channel. Itedpfxjvmxvfs Adwsb Sorting is carried out using an upward airflow generated by a high-performance blower. The air flows through the separator channel, lifting lighter particles while heavier fractions fall downward due to gravity. The specially designed Zig-Zag channel forces the material to pass through the airflow multiple times at each turn. Lighter fractions are effectively lifted and discharged through the top airflow, while heavier particles remain and fall, ensuring precise and efficient separation. The separator is equipped with advanced dust extraction cyclones with filters that eliminate dust emissions throughout the process. This ensures not only high separation efficiency but also environmental safety and workplace cleanliness. Koltex Plastic Recycling Systems also offers high-quality shredders, which can be integrated at the start of the process to create a complete grinding line with the separator. This solution enables comprehensive material processing, from shredding to precise separation, providing full control over the recycling process.

Condition: new, Year of construction: 2024, functionality: fully functional, The SR 8 screw compactor from Koltex is an advanced solution designed for drying film flakes and preparing them for the extrusion process. This innovative machine effectively reduces the moisture content of the material to around 5%, significantly impacting the quality of the final recycled product. Modular construction The machine can be customized to meet the individual needs and requirements of the customer, allowing it to be used to its optimum potential in a wide variety of applications. Reliability The use of renowned drive components with a high degree of efficiency reduces operating costs while extending service intervals. Intelligent machine operation Itodpfxjuqwzws Adwsb Touch panel with intuitive interface for easy control and monitoring of the working process. Space-saving The press is designed to be compact, saving valuable space in the workplace. Capacity (LDPE film): 1500 KG/H Auger diameter: 500 mm Engine power: 45 kW Scraping power: 7.5 kW Feed size: 760x650 Overall dimensions: 6097x1833x2729 Weight: 6800 kg

Year of construction: 2024, condition: new, functionality: fully functional, We are a manufacturer of complete technological lines for washing and granulating plastics. We also offer individual devices such as centrifuges, washers, screw presses, and flotation tanks. A high-performance plastic washing and granulation line, engineered for processing a wide range of materials including PE, PP, HDPE, LDPE, LLDPE, PS, and ABS. This comprehensive recycling solution efficiently manages cleaning, drying, and granulation processes, ensuring the production of high-quality recycled material. Each line is custom-designed to meet the specific requirements of our clients, with throughput capacities ranging from 300 kg/h up to 2,500 kg/h, providing the ideal solution for operations of any size. The system is built for long-term durability and user-friendly operation, making it suitable for both small and large-scale recycling plants. Advanced technologies maximize productivity, reduce energy consumption, and ensure consistent results, delivering a reliable and cost-effective solution to enhance plastic recycling efficiency. Please contact us for inquiries and quotations. Erfor.pl Isdpjuqu Uhjfx Adwotb

Condition: new, Year of construction: 2024, functionality: fully functional, COMPLETE PLASTIC GRANULATION LINES We offer technologically advanced complete plastic granulation lines designed to meet customer needs. Koltex PRS is a Polish manufacturer of high quality machinery and equipment for the various stages of waste recycling: PP,PE,LDPE,LLDPE,PS,ABS,HDPE. We provide comprehensive solutions and support for machine configuration. The innovative technologies of our recycling systems guarantee the highest degree of user-friendliness and equipment efficiency. We offer all the machines needed to configure a complete plastic recycling line. The XR 8 granulation line is the latest model from Koltex Plastic Recycling Systems in the field of LDPE film processing. In addition to the well-known technological solutions used in standard extruders, a number of changes have been made to achieve high production rates while improving the quality of the regranulate achieved. The new system is characterized by low energy consumption and significantly simplified operation thanks to the new SMART software. Numerous modifications have reduced the machine footprint by 30% compared to the previous model, but also increased productivity by 45% while reducing energy requirements by around 15%. An intelligent temperature control system for the plastic in the Agglomerator and an automatic material dosing system ensure process stability. Thanks to the automation of the process, operator involvement has been reduced to a minimum. Our offer also includes: Complete systems for plastics recycling Mills Plastification systems, vibrating screens, centrifuges Screen changers Peripheral equipment Washing lines (DWFS®) Dynamic washing machines Drying separators Granulation and extrusion lines Itjdpfouqmavex Adwsb Service and spare parts You can find out more about our range of products in this area at our website

Condition: excellent (used), machine/vehicle number: 02 P 0587, cutting circuit: 15 - 40 A Iedpfxedyy Dij Adwstb electrical connection: 230 V, 16 A kW space needed: 470 x 250 x 250 mm weight: 10 kg

Condition: excellent (used), Year of construction: 2012, operating hours: 2 h, functionality: fully functional, overall weight: 25 kg, type of input current: DC, input voltage: 220 V, power: 220 kW (299.12 HP), volume flow: 4.6 m³/h, control voltage: 24 V, year of last overhaul: 2025, Volumetric feeder type DM30-38 with horizontal feed line Equipped with D.50 mm screw at 50 mm pitch Supplied without hopper 1/38 brushless geared motor - 220 W - 3000 rpm Itsdjrl Rv Topfx Adwob Power supply 220 V mono 50 Hz Weight : 25 kg

Year of construction: 2010, condition: new, functionality: fully functional, Technical specifications: • Manufacturer: JMC Recycling Systems Ltd. (England) • Model: Dolphin 5005-Lite • Year of manufacture: 2010 • Connection: 380–415 V, 3-phase • Recommended hydraulic oil: ISO 46 Itedpfx Adsxm Uf Seweb • Robust construction, mobile on wheels • Includes control unit and hydraulic drive Condition: • NEW, unused • Only storage marks present (see pictures) • No operating hours

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 21_0346, NEW - NEVER USED heavy-duty positioner for manual or robotic welding - lifting and turning device. Special Device for Special Tasks designed and produced by FÖRSTER welding systems GmbH. Max diameter of the workpiece: 2500 mm Max weight of the workpiece: 20 tons Dimensions of the welding positioner: 7000x3000x3750 mm Weight [without counterweigh]: 20 000 kg Overall dimensions of the whole system: 8900x4800x3750 mm Total weight of the whole system: 40 000 kg Counterweight included with the machine. Ijdourlcropfx Adwetb Full documentation available. Manufacturer's technical support on request. Machine located in central Poland.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Washer for plastic cans and bags Brand: Boldt Systems Model: W 400.4.3.1 Serial number: BW0 04 122 Year of manufacture: 2005 Steam heated Stainless steel mesh belt Belt width: (3x) 380 mm Iedpfswxy Hzjx Adwotb Overall dimensions: 6000 mm x 2100 mm x 2400 mm

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SO-22949/1/19, REF: MM6218 1 X Sparc Systems 8-lane linear weighing combination system. Technical specification⚙️ Iodpfxjxd Thme Adwotb ✅ Model - LCWS. ✅ Serial - SO-22949/1/19. ✅ Overall dimensions - 1620mm long x 920mm wide x 1620mm high. Note 🗒️ Seller has a quote for service and getting production-ready at cost of £12-15k per unit.

Condition: used, functionality: fully functional, Year of construction: 2014, The printer was rarely used and was located at a university. It is no longer in use. Itedpfx Adow Inpnowsb

Year of construction: 2005, operating hours: 5,870 h, condition: good (used), functionality: fully functional, POWER SYSTEM AIRTEC screw compressor Junior 5.5/385 +DF 13 Production POWER System Italy Year 2005 S/N 250911 Operating hours 5875 ( last maintenance 11/2023) Screw compressor with direct drive compact, reliable, quiet with air dryer Itodpfx Adot Iq H Uoweb max 13 bar Output 780 l/min Tank volume 300 l with DF 13 air dryer Motor 5.5 kW (400V, 50 Hz) Weight 382 kg CE-marked Technical specifications subject to change

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 3009F459805, Year of construction: 2021, operating hours: 1,514 h, total length: 1,120 mm, total height: 740 mm, total width: 1,070 mm, overall weight: 211 kg, table width: 1,120 mm, table length: 1,070 mm, MJP 2500 Plus, lightly used. Complete with post-processing oven supplied by the manufacturer and an uninterruptible power supply (UPS). Last inspection: January 2024. The machine has been tested and is fully functional (see images and videos). Suitable for use with biocompatible and sterilizable materials certified by 3DSystems. A list of compatible materials and the technical data sheet are attached. Itsdpfxsxdx Ekj Adweb

Year of construction: 2023, condition: new, In the field of 3D Thermoforming, we also offer presses, brushing machines, film storage paternoster, and membrane on machineseeker! Function: The feeding tray of the press is in position, the work piece carpet is pressed under the holding device. With the vacuum it is hold in position and rotated by 180 °. Then the vacuum turns off and the work piece carpet is turned and the applied charge will be processed directly on the turn over device. Advantages: • The 3D-thermoforming productivity increases- because of quick clearing the table • Savings of time and staff - the preliminary cutting-out of the pressed parts is removed completely • Simple handling of the boards • The foil edges of the 3D furniture doors are not damaged, because the foil is not pulled over the edge of the door Isdpfxed S Dqno Adwetb • Automatic transfer of the whole carpet to a carpet trimming machine is optionally available. • The pins will be protected with this turn over system because the cutout of the over standing foil is made not on the pin table. Details: • Rigid welded frame construction to accommodate the machine parts • Standard size 2800 x 2220 mm x 1200 mm • Hydraulic power unit • Turn table consisting of 9 arms with a special surface of rubber • Vacuum system with hose connections for the turn table • Turning cycle approx. 18-25 seconds • Control System: Siemens LOGO • Protective fences and security devices For the presentation of the turning process, a video is available.

Year of construction: 2023, condition: new, In the field of 3D Thermoforming, we also offer presses, Turn over systems, film storage paternoster, and membrane on machineseeker! RBM 1500 F e a t u r e s • Four-head rotating brush • Infeed inclined roller conveyor with separation • Spiral brush for removal of loose glue residues O p t i o n s • Fifth head rotary brush • discharge roller conveyor with buffer function • Deionization of the furniture fronts after cleaning • Modem for remote maintenance Isdpfxjd S Eago Adwstb A d v a n t a g e s • Chaotic occupancy by automatic Adaptation to front thickness and size • Up to 2000 parts / 8 h The RBM 1500 is a brush machine for film-coated 3DMöbelfronten. The proven four-head rotary brush system removes the Glue overspray on the backs of the furniture fronts and achieves an optimal edge quality. This result is achieved by the disc brushes pneumatically pressure-controlled touch down and the backs the fronts are singing. The RBM 1500 is for a performance of up to designed for 2000 parts per shift. This is the machine the optimal brush system for smaller and medium sized Productions. The RBM 1500 is with an automatic size and Thickness detection of furniture fronts equipped. This allows adaptation to chaotic loading without loss of time in the run. The flexible control offers the Possibility of brushing rectangle and contour parts. The low-maintenance brushes and long service life ensure low production costs. P r o d u c t i o n Machine: RBM 1500 Front shape: Rectangle / Contour Frontsize minimal (L x W x H): 180 x 90 x 15 mm Maximum frontsize (L x W x H): 3000 x 650 x 38 mm Brush operation: 2000 parts per 8 h Standard parts of 650 x 400 mm