Used Hydraulic Excavator for sale (15,278)

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, AXA ELECTRO-HYDRAULIC PRESS WITH TRAVERSING CYLINDER Capacity: 150 tons. Automatic dual-speed operation with fast mode. Special electrical panel with quick/slow changeover switch for one-handed operation. Traversing cylinder stroke: 816 mm. Internal clearance (side to side): 1,500 mm. Ram stroke: 300 mm. No. 01 AXA PM150/15 ELECTRO-HYDRAULIC PRESS WITH MOVABLE PISTON – NEW ITEM, CE MARKED. Bledpfx Akslruhdj Hsg — AUTOMATIC DUAL-SPEED OPERATION WITH FAST MODE. — COMPLETE WITH SPECIAL ELECTRICAL PANEL WITH QUICK/SLOW SWITCH FOR ONE-HANDED OPERATION. — TECHNICAL DATA SHEET ATTACHED. - Rated force: 150 tons - Cylinder stroke: 300 mm - Internal clearance: 1,504 mm - Approach speed (fast): 1,450 mm/min - Working speed (slow): 105 mm/min - Ram stroke: 300 mm - Ram diameter: 110 mm - Stem diameter: M30 - Tank capacity: 50 liters - Max pressure: 350 bar - Voltage: 400 V, Frequency: 50–60 Hz - Motor power: 3 kW - Max current draw: 7.3 A - Weight: 1,500 kg Equipped with GALTECH distributors: • 2MP block. • No. 2 VIVOIL external gear unidirectional pumps: one for rapid approach and return (set at 20 bar), and one with adjustable pressure via handwheel to set desired force. • Maximum pressure valve with mechanical lock to prevent overpressure. • Standard gauge to display delivered force. • INTECH electrical panel, certified according to current standards and supplied with independent CE marking.

Condition: like new (used), Year of construction: 2013, cutting length 1060 mm cutting angle 2 ° no. of strokes 50 Hub/min engine output 4,0 kW weight of the machine ca. 0,67 t Motorised guillotine shears type 165.03 Technical data: Working width (cutting length): 1060 mm Max. sheet thickness to be cut: 2.5 mm at 400 N/mm² Machine stroke rate approx.: 50/min Cutting angle: 2° Opening width hold-down device: 5 mm Factory setting cutting gap 0.1 mm Bedpfxoua Iule Ak Helg - Digital display for backgauge - Front table support - Operating instructions available

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Bledevvkmbspfx Ak Hjg Storage location: Nattheim

Condition: excellent (used), Catalogue No.: 7502 TECHNICAL DATA Feed Carriage DTBC-P — Wheelbase: 750 mm — Feedstock diameter: 100–800 mm — Total lateral travel: 160 mm — Log rotation (left/right): 360° — Travel speed (forward & reverse): stepless — Hydraulic pump motor power: 5.5 kW Auxiliary Carriage DTCB — Wheelbase: 750 mm — Lateral travel range: 160 mm — Log rotation (left/right): 360° — Lateral movement motor power: 1.1 kW — Feed carriage dimensions (L/W/H): 2850/1400/1500 mm — Auxiliary carriage dimensions (L/W/H): 950/650/750 mm — Total weight: 1450 kg ADVANTAGES Bljdpfeylbmbsx Ak Hjg – Manufactured in Poland – Robust construction – Includes hoses and chains – Used machine, in very good condition, fully refurbished (invoice available for inspection) PRODUCT FEATURES The auxiliary carriage is designed to support logs or cants on the infeed side of the sawmill within a diameter range of 100 mm to 750 mm. The feed carriage is intended for feeding logs and cants into the sawmill within a diameter range of 100 mm to 750 mm. The machine facilitates log handling, including clamping the log, lateral movement, and rotating, all powered by hydraulic drives. Net price: 59,900 PLN Net price: 14,260 EUR (based on 4.2 EUR/PLN exchange rate) (Prices may vary depending on currency fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and brand names are used for informational purposes only, to enable identification of the goods. We only resell items that have already been placed on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: excellent (used), CATALOG NUMBER 7926 TECHNICAL DATA - Working length: 6200 mm - Working width: 150 mm - Working height: 1350 mm - 12 vertical hydraulic cylinders - Dimensions (L/W/H): 6580/1270/2350 mm - Weight: approx. 4000 kg Blsdpfoyu Tp Tjx Ak Heg ADVANTAGES – very good condition – used press – original paint (not repainted) – intended for professional use Net price: 69,900 PLN Net price: 16,650 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of significant exchange rate fluctuations, the price may change)

Condition: good (used), Year of construction: 2001, sheet width 3050 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 - 8.0 mm down holder 13 Stück distance between columns 3070 mm cutting angle 1.0 - 4.0 ° no. of strokes ~ 22 Hub/min Control ELGO P8511 oil volume 240 l voltage 400 V total power requirement 15.0 kW weight 8000 kg range L-W-H 3550 x 2350 x 1900 mm Bjdpsy Ig R Eefx Ak Hjlg good condition (!!) from a maintenance workshop Equipment: - NC electro-hydraulic guillotine shears - heavy / stable welded construction (machine body) - NC ELGO digital control unit "P8511" - NC electro-motorized backgauge on ball screws - electro-hydraulic cutting angle adjustment * Front analog cutting angle display - 1x stable side fence, with T-slot and mm scale - 3x stable support arms, with T-slot and mm scale - Ball castors in the work table incl. recessed grips - Front finger guard - can be folded up at the front - 1x freely movable foot switch - 2x front emergency stop button - Rear safety guard (protective grille) - original operating instructions

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic pistons, pressure pistons, hydraulic buffers -OLEO hydraulic buffer -Type: 21 - M FS - 100 Bodpod Subuefx Ak Hslg -Stroke: 150 mm -Piston rod: Ø 76mm -Dimensions: 151/151/H584 mm -Quantity: 3 hydraulic buffers available Price: per piece -Weight: 18 kg

Condition: good (used), Ideal 7260 Hydraulic Paper Guillotine Machine in very good condition, ready for production. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine has a 721 mm knife length and is equipped with infrared safety curtains, a hydraulic hold-down device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable program with 99 steps each, electronic saddle position reading with 1/10 mm accuracy, and a self-diagnostic system with error messages displayed on the screen. The machine’s main work table is made of stainless steel and has a blower. A paper ejection function is included for ease of use. Technical data: Cutting length 721 mm Infeed height 80 mm Infeed depth 720 mm Front table depth 530 mm Minimum final offcut 20 mm Minimum final offcut with beam guard in place 90 mm Power supply 400 V / 50 Hz 1.5 kW Weight 588 kg Dimensions 1335 x 1305 x 1540 mm Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator (Laser), Air table (on front and rear tables), Pedal for pre-marking the cutting line, Bljdpoy Ah Iuofx Ak Hjg Front table made of chrome-nickel steel, Blade made of high-quality HSS steel, Safety features ensured by: safety curtains – photocells transparent safety cover on the rear table safe drive – IDEAL patent two-handed, electronically controlled cutting start automatic knife return from any position main switch equipped with a key switch knife replacement possible with the blade permanently covered

Condition: used, functionality: fully functional, power: 51 kW (69.34 HP), fuel type: diesel, empty load weight: 8,400 kg, Year of construction: 2019, operating hours: 1,643 h, drive type: Diesel, Mini excavator Bljdpey Dytxsfx Ak Hog Condition: Ready for operation and fully functional Technical condition: Very good Description: Crawler excavator TAKEUCHI TB 290-2 – - KNICKER – - Year 2019 – - 1,643 operating hours – - hydraulic quick coupler – - MARTIN POWERTILT – - 3 digging buckets 30cm + 60cm + 90cm – - 1 ditch-cleaning bucket 150cm – - 4-cylinder Yanmar TURBO diesel engine 51.6 kW (70 HP) – - AIR CONDITIONING – - rearview camera – - refueling pump – - long reach arm – - excavator in very good condition – - rubber tracks approx. 80% – - Inspection and test digging possible on site – - Affordable delivery options! Quick coupler, buckets, 3rd valve, 4th valve, rear work lights, front work lights, heater, full cab, air conditioning, CE certificate,

Condition: used, functionality: fully functional, power: 43 kW (58.46 HP), fuel type: diesel, empty load weight: 8,778 kg, Year of construction: 2017, operating hours: 4,600 h, drive type: Diesel, Mini excavator Condition: Operational and fully functional Technical Condition: Good Description: Excavator – Crawler Excavator – Track Excavator – Mini Excavator VOLVO ECR88D – Year 2017 – 4,600 operating hours – Hydraulic quick coupler + GEEL - POWERTILT – 2 used ditch-cleaning buckets 35 + 100 cm – 1 used grading bucket 1.40 m – Cabin, heating – Front and rear work lights – 3rd and 4th hydraulic circuit – Diesel refueling pump – 1 near new rubber track, 1 rubber track approx. 40% remaining – Good original condition Quick coupler, buckets, 3rd valve, 4th valve, rear work light, front work light, heater, full cab. Bjdpey Dytlofx Ak Helg

Condition: used, functionality: fully functional, power: 50 kW (67.98 HP), fuel type: diesel, empty load weight: 7,292 kg, Year of construction: 2019, operating hours: 6,410 h, drive type: Diesel, Wheeled Excavator Condition: Ready for operation and fully functional Bsdpjy Dytfofx Ak Helg Technical condition: Very good Front tires condition: 40% Rear tires condition: 40% Description: Wacker Neuson EW 65 wheeled excavator - Type E14 - Martin POWERTILT - hydraulic quick coupler - 3 trench buckets (30 cm) - 1 grading bucket (1 cm) - 6,410 operating hours (according to the hour meter) - Year of manufacture: 2019 - Full cab, heating, lighting system + AIR CONDITIONING - air-suspended seat - 7,292 kg operating weight - auxiliary hydraulics - 4-cylinder PERKINS turbo diesel engine - Service performed approx. 100 hours ago - excellent original condition - with documents for registration in Austria Quick coupler, buckets, 3rd valve, 4th valve, rear work lights, front work lights, heater, full cab, air conditioning, CE certificate,

Condition: used, functionality: fully functional, power: 12 kW (16.32 HP), fuel type: diesel, empty load weight: 1,885 kg, Year of construction: 2016, operating hours: 3,242 h, drive type: Diesel, Mini excavator Condition: Ready for operation and fully functional Technical condition: Good Description: Mini excavator KUBOTA KX, year of manufacture 2016 - 3,242 operating hours - 1,885 kg operating weight - POWERTILT Lehnhoff MS 01 - mechanical quick coupler - 2 trenching buckets (30 + 50 cm) - 1 ditching bucket (100 cm) - HYDRAULICALLY ADJUSTABLE UNDERCARRIAGE (100 - 130 cm) - Work lights front and rear - 3-cylinder Kubota diesel engine 11.8 kW (16 hp) - Powertilt on joystick - AS NEW rubber tracks - Excavator in excellent condition - All dry - Buckets can also be reversed Quick coupler, buckets, 3rd valve, 4th valve, rear work light, front work light, heater, full cab, Bodpfx Aoy Dyrzjk Helg

Condition: used, functionality: fully functional, power: 231 kW (314.07 HP), Year of construction: 2004, machine/vehicle number: KMTODO61E02076058, fully functional Blodpjylyp Usfx Ak Hog

Condition: excellent (used), functionality: fully functional, power: 221 kW (300.48 HP), color: yellow, Year of construction: 1997, machine/vehicle number: 60687, The machine is in excellent condition. Blsdpfxjylyn Dj Ak Hsg

Condition: used, Year of construction: 2012, operating hours: 14,278 h, Vehicle No.: 375-25 Terex-Fuchs MHL 340 Magnet system ENGINE NEWLY OVERHAULED * Year of manufacture: 2012 * Operating hours: 14,278 hours * Weight: 27,400 kg * Power: 128 kW * Solid rubber tires (POOR CONDITION) Inspection is possible at any time during our business hours; test drives can be arranged by appointment! For export sales, a deposit will be withheld; this will be refunded after receipt of the proof of arrival certificate. Company or advertising logos on the vehicles may have been digitally edited in the photos. No guarantee is given for the function of accessories or additional equipment. All information is subject to change without liability – errors, modifications, typing mistakes, and prior sale reserved. Vehicle descriptions do not constitute guaranteed properties. Please refer to our general terms and conditions and acknowledge them. Bljdox S Airepfx Ak Hjg

Condition: used, operating hours: 16,911 h, Vehicle No.: 407-25 HITACHI ZX 250 LCN-3 Year of manufacture: 2008 * 132 kW * Hammer circuit * Quick coupler * Cabin protective grille * Undercarriage approx. 70% Bljdpfxsxw Apme Ak Hog Inspection possible at any time during our business hours, test drive by appointment! For export sales, a deposit will be retained and refunded upon receipt of the confirmation of arrival. Company logos or advertising markings on the vehicles may have been digitally edited in the photos. No guarantee is given for the functionality of the extras. All information is provided without guarantee - subject to errors, changes, typographical mistakes and prior sale. Vehicle descriptions explicitly do not constitute guaranteed characteristics. We refer to our General Terms and Conditions, which must be acknowledged.

Condition: used, Year of construction: 2000, sheet length: 4.100sheet thickness: 12total power requirements: 30weight approx.: 16300messurements (LxWxH): 5350 x 2250 x 2250back gauge: 1000New Price: approx. 100,000 EURO Condition: Used, very good condition Equipment: - Swing cut execution - NC preset control ELGO for rear gauge - Motorized rear gauge up to 1,000 mm on ball screw spindles, foldable - Clearly arranged control panel mounted on a swivel arm - Hydraulic hold-downs positioned close to the cutting edge - Footswitch - Central manual cutting gap adjustment Accessories: - 1 side fence 1,500 mm with scale, T-slot, and tilting bolt - 2 sheet metal support arms 1,000 mm with T-slot - Easy replacement and resharpening of the blades - Adjustable cutting length for efficient processing - Lower blade 4-fold reversible Bjdpfxjwiatvs Ak Helg - Upper blade 2-fold reversible Additional Details: - Operating manual in GERMAN - Machine and equipment comply with CE regulations

Condition: excellent (used), Year of construction: 2024, machine that shapes metal or material under very high pressure Bjdpfjy A Hv Dex Ak Hslg

Condition: used, 5068 - Cutting machine, plate shear, scissors €1,500 In stock Cutting width: 3900 mm Bljdpfx Aksy Apu Nj Hog Overall dimensions: 4750 x 1450 x 2750 mm

Condition: ready for operation (used), Hydraulic lifter 1000t, hydraulic cylinder, hydraulic power unit Manufacturer: Bucher Hydraulics Type: QX24-008R ; PHHET Weight : 850 kg Year : 2017 Overall dimensions : 1240 x 770 x 1560 mm Performance : 350 bar, 11 kW, 2800 l/min Lifter Manufacturer : Schiess Defries Type : 172 | 18442168 Pressure : 450 bar Bljdpfjx Da A Dsx Ak Hsg Stroke : 150 mm Load capacity : 1000 t

Condition: ready for operation (used), Hydraulic power unit, 350 Bar, used machine Manufacturer: Bucher Hydraulics Type: QX24-008R ; PHHET Overall Dimensions: Width: 1260 mm Depth: 800 mm Height: 1560 mm Weight: 620 kg Year of Manufacture: 2017 Electrical Data: 3×400V / 230V, 50Hz, 11 kW Operating Pressure: 350 bar Bljdpfexxixqjx Ak Hsg

Condition: ready for operation (used), Bridge Lifting Power Unit,Structural lifting system,Hydraulic lifting unit, 1000-ton hydraulic cylinder, Used Machine Manufacturer: Bucher Hydraulics Type: QX24-008R ; PHHET Overall dimensions: Width: 1420 mm Depth: 860 mm Height: 1770 mm Operating pressure: 350 bar Year of manufacture: 2017 Weight: 850 kg Electrical data: 400 V; 11 kW; 20 A Bjdpfx Akjyr Ihrj Helg Hydraulic Cylinders: 1. Overall dimensions: 900 x 900 x 485 mm Weight: 1400 kg Manufacturer: Schiess Defries Operating pressure: 450 bar Load capacity: 1000 tons Diameter: 710 mm 2. Overall dimensions: 900 x 900 x 485 mm Weight: 1400 kg Manufacturer: Schiess Defries Operating pressure: 450 bar Load capacity: 1000 tons Diameter: 710 mm

Condition: good (used), functionality: fully functional, power: 12 kW (16.32 HP), fuel type: diesel, empty load weight: 1,865 kg, Year of construction: 2014, operating hours: 3,383 h, Equipment: adjustable chassis, cabin, hammer hydraulics, onboard computer, rubber tracks, Takeuchi TB 216 Bedey Dpd Hspfx Ak Hslg Year: 2014 According to counter: 3,383 hours 1,865 kg 11.5 kW - MS 01 quick coupler - 2 digging buckets - Additional hydraulic circuit on the arm - Hydraulic adjustable undercarriage - Cabin with heating - Work lights - Immediately operational - Very good original condition - Very good tracks Sales price: €16,500 net including the 2 digging buckets as shown in the pictures! New hydraulic grading bucket available at extra cost! Affordable delivery available!

Condition: good (used), functionality: fully functional, Year of construction: 2006, Used M Shear from Safan Model: M Shear 430 6 TS 200 Capacity: 4300 x 6 mm Automatic setting of cutting gap, cutting angle, and back gauge Equipped with pneumatic sheet support at the rear Return to sender feature Scrap container Entry safety barrier Bsdpfoy H D I Esx Ak Helg

Condition: new, bending length: 3100sheet thickness: 8upper roll diameter: 230 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 8.250.00 Side supports EURO 7.070.00 We have many references! Blodpfed Ab Tgex Ak Hsg