Used Hydraulic Lift Table for sale (45,792)

Condition: used, Hydraulic scissor lift table GRUSE type ELS 0.5-8-1-G-SO Make No.: 124984 Year of construction 2017 lifting capacity 300 kg platform size 1250 x 800 mm useful stroke max. 785 mm Duodpfjixq Hnjx Afwsp Overall height - table bottom 345 mm Overall height - table top 1130 mm Motor power 0,8 kW Mains connection 400 Volt, 50 Hz - foot switch for up and down, with emergency stop and key switch for control on - single shear with one lifting cylinder - revolving safety contact strip with limit switches under the upper frame - adjustable limit switch for the upper lifting restriction - Table top with sturdy wooden worktop and airliner rails with lashing eyes - hydraulic power unit with tank mounted under the table - feet under the table corners, mobile with lift truck own weight 250 kg very good condition, almost as new

Condition: used, Hydr. scissor lift table WEIDMANN type E5/13-1 Serial no. 30403339 Year of construction 1982 / 2007 Load capacity 500 kg Platform size 2000 x 1200 mm Lift max. 1280 mm Overall height - table bottom 290 mm Overall height - table top max. 1570 mm Table height with safety support 1430 mm Lifting speed 1280 mm in 25 sec. Lowering speed 1280 mm in approx. 0 to 15 sec. Hydraulic operating pressure approx. 130 bar Motor power 1.5 kW Mains connection 400 Volt, 50 Hz. - Rotary switch on the hydraulic unit for up and down - Infinitely adjustable lowering speed via throttle valve - 1 lifting cylinder - Hydraulic unit built in 2007 with tank opposite - Safety protection frame with limit switches dead weight 660 kg good condition Dusdohlnznspfx Afwjp

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit) Year of manufacture 1991 Nominal lifting capacity 1500 kg Djdjl Nbqcopfx Afwoup Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, lifting height: 1,450 mm, load capacity: 1,000 kg, total length: 1,700 mm, total width: 760 mm, input voltage: 400 V, type of input current: three-phase, height adjustment type: hydraulic, operating pressure: 180 bar, We are selling a mobile lifting platform from Trepel, Wiesbaden, which was used for loading and unloading trucks. The platform is in very good condition and operates flawlessly. Viewing is possible by appointment. Djdsydc Dfjpfx Afwoup

Condition: repair required (used), Table size: 2900 x 1200 mm Folded size (without legs: )420 mm Opened size: (without legs): 1700 mm without hydraulic unit! Djdpfxjik Hbzj Afweup Quantity: 1 pc Price/pc

Condition: good (used), Year of construction: 2003, machine/vehicle number: 42058, Offer 20223 Dusdoxdivyspfx Afwop Technical data: - Operation via hand-held remote control with cable - Load capacity: 1000 kg - Platform size: 1250 x 800 mm - Min. lift table height: 280 mm - Max. lift table height: 950 mm - Lift stroke: 670 mm - Hydraulic drive: 400 V / 1.1 kW - Required space: approx. W 1300 x D 900 x H min. 280 mm - Weight: approx. 150 kg - Mobile undercarriage

Condition: good (used), Year of construction: 2014, machine/vehicle number: 5890, Offer 25118 Duodpfxswmnhps Afwop Technical specifications: - Tapping capacity approx. M 3 - M 8 - Working range (swivel radius) approx. 1800 mm - Multi-position head - Speeds 8 - 700 rpm - Quick-change tool holder size 1, diameter 19 mm - Pneumatic connection 6 - 8 bar - Table base H 900 mm - Space required approx. W 1000 x H 2000 x D 1000 mm - Weight approx. 100 kg

Condition: good (used), Year of construction: 2019, machine/vehicle number: 6284, Offer 24033 Technical data: Duedport Unwjfx Afwjp - Tapping capacity M 3 - M 24 - Working range (swivel radius) 1800 mm - Infinitely variable speed adjustment up to 475 rpm - Digital depth adjustment - Torque 140 Nm - Quick-change tool holder size 2 diam.31 - various inserts for quick-change tool holder - Table surface 1200 x 990 mm - Table height 830 mm - Space requirement approx. W 1250 x H 2000 x D 1000 mm - Weight approx. 300 kg

Condition: good (used), Saxon Bag Sealer Dujdpjv Dm Epefx Afwjp With Reverse Facility With Top Bag Cutter With Hydraulic Lift Mast Stainless Steel 230 Volt Power Supply

Condition: ready for operation (used), Bridge Lifting Power Unit,Structural lifting system,Hydraulic lifting unit, 1000-ton hydraulic cylinder, Used Machine Manufacturer: Barabás Engineering Office Ltd. Type: PHHET Overall dimensions: Width: 1420 mm Depth: 860 mm Dujdpoyr Ihrefx Afwjp Height: 1770 mm Operating pressure: 350 bar Year of manufacture: 2017 Weight: 850 kg Electrical data: 400 V; 11 kW; 20 A Hydraulic Cylinders: 1. Overall dimensions: 900 x 900 x 485 mm Weight: 1400 kg Manufacturer: Schiess Defries Operating pressure: 450 bar Load capacity: 1000 tons Diameter: 710 mm 2. Overall dimensions: 900 x 900 x 485 mm Weight: 1400 kg Manufacturer: Schiess Defries Operating pressure: 450 bar Load capacity: 1000 tons Diameter: 710 mm

Condition: excellent (used), Electrohydraulic lifting device, linear drive, linear gear, lifting gear, spindle drive, electrohydraulic actuator for valves, valve drive, actuator, servo motor, actuating cylinder for rotor brake, disc brake, electrohydraulic disc brake, crane brake, electrohydraulic lifting device, lifting drive -Manufacturer: EMG Eldro Electro-hydraulic lifting device unused -Type: Eldro Ed 80/6 -Item no.: 1045 2806 lifting drive Eldro Ed 80/6 -Stroke: 60 mm -Shaft: Ø 20 mm -Number: 4x lifting drive available -Price: per piece -Dimensions: 490/190/H255 mm Duedpfx Afsv Hxw Ajwep -Total weight: 22 kg/piece

Condition: used, total length: 2,000 mm, total width: 2,000 mm, - Documentation available: No - CE certificate present: No - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Djdjyrb Uxjpfx Afwsup Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2003, Double scissor lift table, lift table with double scissor mechanism, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table Dujdeyn Rffspfx Afwop -Manufacturer: KAISER KRAFT, Scissor lift table type M2000 -Load capacity: 2000 kg -Platform: 1000 x 2000 mm -Dimension when retracted: Height 805 mm (without feet) -Extended dimension: Height 3400 mm -Transport dimensions: 1000/2000/H1050 mm -Empty weight: 1245 kg

Condition: new, weight max. in kg 2000 kg table length 1300 mm stroke height 190-1010 mm Dsdpexak Ipsfx Afweup table width 800 mm stroke of worktool slide 22 mm/sek. weight 280 kg Furnishing: - For ergonomic work at the optimal working height - With closed platform - Separate control unit with 3 meter cable, control buttons and emergency stop switch - Stepless lifting and lowering - Stable powder-coated steel construction - Guaranteed stability - Circumferential safety strips - Meets the safety criteria of EN 1570 - High pressure cylinder with double safety function

Condition: used, Rotary indexing table, rotary indexing table with 16 stations Rotary indexing machine + TOX hydraulic press Special rotary indexing machine with multiple assembly stations Production and assembly line with rotary indexing system From special machinery manufacturer "AKE-technologies GmbH" Dujdpfx Aegd D U Ejfwsp Serial number: Order number: 11111 Year of manufacture: 2012 - large rotary indexing table WEISS type TC500, with 16 stations - pressing station with TOX power pack - vibratory feeder - conveyor belts - testing stations - some stations still visible in the photos but already dismantled Required space L x W x H approx. 3500 x 2750 x 2300 mm Net weight approx. 3000 kg All in as-new condition – the system was never used in series production.

Condition: used, Hydr. scissor lift table TREPEL - L. A. VAN EIJLE & Co. Djdpod I Nrpjfx Afweup Year of construction approx. 1980 Load capacity approx. 5 ton. Platform size 1700 x 1100 mm Lift max. 515 mm Lower table height with rail rollers 535 mm Table height without rail rollers 480 mm Table height raised with rail rollers max. 1050 mm Table height raised without rail rollers max. 995 mm Travel speed rail trolley approx. 8.5 meters/min. Motor power 4 kW Mains connection 400 Volt, 50 Hz - Manual button for up and down on the cable - Safety limit switch - Hydraulics with tank mounted in the undercarriage - Lifting scissors with two lifting cylinders - The table could be moved on rails, 4 rollers on the base frame, Ø 200 mm - Rail rollers driven by SEW geared motor with chain Space requirement L x W x H 2070 x 1350 x 1050 mm Own weight approx. 1.3 tons. good condition

Condition: used, Electro Hydraulic Scissor Fork Lift Pallet Truck Scissors lift truck, pallet lift truck TOYOTA / BT type HTH 10 E serial no. 481795 year of manufacture 2005 lifting capacity 1000 kg lifting height max. 800 mm overall height lowered 85 mm Duedpfxsg D H Ivj Afwsp Fork length 1190 mm - electric lift via 12 volt battery - manual lift via hand lever as for lift truck - TOYOTA Industrial Equipment Europe SARL (Made in France) - long stroke hydraulic cylinder - with single roller - integrated charger (mains voltage 230 Volt, with cold appliance plug) own weight 140 kg good condition

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 Dusdper I E Itsfx Afwop - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: good (used), Year of construction: 2008, load capacity: 1,000 kg, lifting height: 800 mm, fuel type: electric, empty load weight: 135 kg, MULTIPLE UNITS IN STOCK This semi-electric scissor lift from 2008 by BT is in good condition; The stacker is manually operated and lifts fully electrically; The stacker has a capacity of 1,000 kg; Lifts up to a height of 800 mm; Ideal to use as a workbench! The 2 x 12 volt batteries come with an INTERNAL charger; Dodpfox Hpndsx Afweup Order the scissor lift through our webshop or schedule a test drive; Video coming soon.

Condition: used, Year of construction: 1990, functionality: fully functional, Lifting table with roller conveyor and hydraulic unit Manual control Dedpoymz Sgefx Afwsup Lifting capacity: 5000 kg platform length: 6700 mm platform width: 1500 mm Overall height: 630 mm Maximum height: 2200 mm

Condition: like new (used), Year of construction: 2021, operating hours: 1 h, functionality: fully functional, machine/vehicle number: PW2000-003, total height: 1,300 mm, empty load weight: 1,310 kg, load capacity: 2,000 kg, total length: 2,600 mm, total width: 1,800 mm, table width: 900 mm, input voltage: 400 V, working height: 1,100 mm, table length: 1,400 mm, Dimensions LxWxH: approx. 2600 x 1800 x 1300 mm Load capacity: 2,000 kg The turning device consists of two opposing tables, each with a support surface of 1400 x 900 mm. On the side of the table that is at the bottom during swiveling, the load-bearing steel profiles are angled upward by 90° to securely hold the plate being turned even in a vertical position during a 90° rotation. Both tables are positioned opposite each other and are swiveled by 100° using hydraulic cylinders. The tables are mounted on a load-bearing base frame, with one table fixed in place and the other movable. The movement is performed by hydraulic cylinders which can displace the table mounted on rollers by approx. 300 mm. The base frame also houses the hydraulic and electrical components. A hydraulic power unit is used as the drive source, supplying oil to the cylinders in response to control commands. The respective valves are actuated electrically and/or hydraulically, initiating and maintaining the required table movements in interaction with each other until the turning process is complete. Particular attention in the design of the hydraulic system is given to operational safety and sensitive switching between pushing and pulling motions. The geometry of the table pivot axes results in changing load effects on the tilt cylinders. The hydraulics are designed to ensure the required performance and prevent overloading the components during normal operation. Suitable filters, in combination with a generously sized tank, ensure high availability of the hydraulic system. The necessary electrical control system is fully integrated into a sheet steel enclosure housing all required components. The core of the control system is a PLC, which processes operating parameters based on the programmed specifications. The emergency stop function and all relays and evaluation units required to operate the functions are also installed. Operation of the turning device is via a control panel featuring a touch panel for entering function parameters, such as Table 1 swivel up, Table 1 swivel down, Table 1 forward, Table 1 back, Table 2 swivel up, Table 2 swivel down, as well as automatic start/stop. Duedpfsyr I Dtjx Afwjp To prevent table collision in manual mode, the PLC programming ensures this by using table position and tilt data. After resolving an emergency stop, the PLC control independently completes the turning process. The turning device is equipped with heavy-duty castors, making it mobile. We have several of these devices in daily operation. This unit is unused.

Condition: excellent (used), functionality: fully functional, - Paul 15 AO under-table crosscut saw Well-maintained machine with low operating hours Duodeyf Uppopfx Afwep - Hydraulic saw stroke - 150 mm cutting height - Approx. 590 mm max. cutting width - Left roller conveyor 2 m with 3 pneumatic stops - Right roller conveyor 4 m

Year of construction: 2002, condition: used, functionality: fully functional, Hydraulic scissor lift table with separate hydraulic power unit lifting capacity 3000 kg Platform size 1100 x 3500 Min. height 450 mm Max. height 2500 mm Duodpoymfmuefx Afwsp Handheld controller

Condition: new, Year of construction: 2026, functionality: fully functional, Max. lifting capacity 400 kg Height adjustment 500 - 1150 mm Dodpsyrdcxsfx Afweup Perforated plate, coated, 2000 x 1015 x 30 mm Price without accessories (support rails, rack and pinion, counter-bearings, etc.)

Condition: new, Year of construction: 2026, Max. lifting capacity 400 kg Worktop: birch multiplex Dodpfxjyrc Duj Afweup Worktop size: 1245 x 740 x 24 mm with recessed grips Height adjustment: 480 - 1070 mm