Used Hydraulic Splitter for sale (14,051)

Condition: used, Year of construction: 1995, Technical details: Gbsdjvc Amtjpfx Ah Hjg sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Drain with rollers for clippings 2x protective grid *

Condition: good (used), Atom SE 25 Hydraulic Arm Press This machine is in perfect condition and ready to operate. It is ideal for die-cutting difficult materials, particularly in the leather goods and printing industries. It can be used with both leather goods and bookbinding dies. It cuts paper, cardboard, leather, plastic, etc. Pressure: 25 tons Power: 380V Table dimensions: 1000mm x 500mm Hammer dimensions: 500mm Gbsdpox Nc Agsfx Ah Hog Maximum stroke: 90mm Motor power: 0.9kW Weight: 1030kg Two-handed control.

Condition: used, Hydraulic power unit, hydro power unit with double pump, tandem pump, hydraulic unit Manufacturer likely Italian Type: PF1/1-2.8/2.8 Gjdpfx Aoxrgt Ssh Hjbg Year of manufacture: approx. 2000 Operating pressure: 50 bar, max. 100 bar Flow rate: 2 x 4 liters/min. (2 pumps) Tank capacity: approx. 25 liters Motor power: 1.5 kW Power supply: 220 volts, 50 Hz - Double pump, tandem hydraulic pump, type PF1/1-2.8/2.8 131DBV601 - 1 return filter - 2 pressure gauges - Tank dimensions (L/W/H): 320 x 300 x 290 mm - Pressure port connections at the hydraulic pump outlet: 10L Installation space required (L x W x H): 600 x 400 x 600 mm Net weight: approx. 70 kg Very good condition

Condition: used, Year of construction: 2008, sheet width 3200 mm plate thickness 6 mm distance between columns 3200 mm back stop - adjustable 20 - 600 mm dimensions ca. 4010 x 1610 x 1620 mm engine output 7,5 kW Control eView weight of the machine ca. 7,2 t Gbjdpfxeqva Rzs Ah Heg CNC swing cut panel shears electrical components from Siemens, ABB and Mitsubishi, Pilz safety control hydraulic components made in Italy 3 support arms and 1 angle stop Ball rollers in the table Operating instructions available

Condition: used, Year of construction: 2013, operating hours: 385 h, machine/vehicle number: GS3232A-115248, Empty weight: 2.350 kg Lifting capacity: 227 kg Gbodsxwiv Hspfx Ah Hjg Working height: 1.175 cm Front tyres / undercarriage remaining: 40 Rear tyres remaining : 40 Tyre brand: - Transport dimensions (LxWxH): 2.44x0.81x2.43 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2008, operating hours: 15,498 h, 2008 | Sennebogen 850R with hydraulic rotating grapple | Used Material Handling Excavator | 15498 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 165000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 57 inspection points 47 approved ✅ 9 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Machine is operational with normal wear for 15,000 hours, some minor oil leaks. Turret brake needs inspection. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "32948 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Gbsdpfx Ahox Ti T He Hsg 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 1983, Technical details: Pressure: 160 t throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm Godpfx Ahju Nfvus Hsbg clamping plate on table: 1250x630x100 mm passage opening in table: 4x Ø 62mm mm ram speed - forward: 200 mm/s ram speed - reverse: 125 mm/S ram surface area: 450 x 850 mm mortise hole in ram: Ø 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: good (used), functionality: fully functional, Year of construction: 2008, working width: 3,080 mm, sheet thickness (max.): 13 mm, Equipment: emergency stop, finger protection, foot remote control, For sale: Durma VS 3013 hydraulic guillotine shear, lightly used, single owner, manufactured/purchased in 2008 (supplied by Vendo Kft.). The machine is in very good technical condition and has been regularly maintained. Key Specifications: Cutting length: 3080 mm Maximum sheet thickness: 13 mm (steel), approx. 10 mm (stainless steel) Drive system: Hydraulic Back gauge: Motorized Hold-down system: Hydraulic clamps Frame: Heavy-duty welded steel construction Machine weight: 12,900 kg Condition: Very good Location: Tatabánya, Hungary Price: EUR 21,500 net Gsdpfx Ajx Taraoh Hobg The machine can be inspected and tested at our facility in Tatabánya, Hungary.

Condition: excellent (used), functionality: fully functional, Manufacturer: MURARO Model: ID500/250 Year: 2001 Condition: Used Stock number: Code 0114 Maximum upper slide pressure: 500 tons Slide stroke: 900 mm Maximum daylight: 1,500 mm Table size: 2,700 x 1,600 mm Gedpfxjx R U R Ej Ah Hsbg Slide dimensions: 2,700 x 1,600 mm Blank holder table size: 2,450 x 1,250 mm Approach speed of slide: 650 mm/sec Blank holder cushion – total force: 250 tons Lower blank holder stroke: 400 mm Overall press height from floor: 5,600 mm

Condition: good (used), functionality: fully functional, Year of construction: 1997, machine/vehicle number: C971109, controller manufacturer: AMADA, controller model: PROMECAM, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, overall weight: 10,000 kg, total length: 4,500 mm, total width: 3,500 mm, total height: 2,800 mm, AMADA GPX 630 Guillotine Shear - Power supply: 5.5 kW - Max. backgauge travel: 160 mm - Including left stop - Backgauge length: 3200 mm - Cutting length: approx. 3050 mm Note: The item must be definitively collected between 19 and 23 January 2026 on a date to be mutually agreed. Gbodpsxw T Iaofx Ah Heg FCA D-76571 Gaggenau – loaded onto truck

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Lukas / Frieseke and Hoepfner, hydraulic pump hand pump -Type: ZPH 10/25 -Pressure range: max. 450 bar Gbedpfxehmgzdo Ah Hjg -Number: 12x hand pumps available -Price: per piece -Dimensions: 660/180/H200 mm -Weight: 6.9 kg/piece

Condition: used, Technical details: Pressure: 2,3 t stroke: 280 mm throat: 155 mm max. ram stroke: Vorlauf: 0,08 m/sec Gbedpfxju Nfwlj Ah Hsg daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: max. 355 mm clamping plate on table: 280 x 280 mm passage opening in table: Ø 100 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 725 mm total power requirement: 1,1 kW weight of the machine ca.: 0,5 kg dimension machine xH: 0,6 x 0,7 x 1,6 m Press with mechanical 2-hand operation. Pressure test up to 2,3to performed. Good condition. *

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Manufacturer: GIGANT Model: G2-1200/2 Year: 1993 Condition: Used Stock number: 0375 Pressing force: 1200 t Number of pressing points: 2 Die table size: 3,700 x 2,700 mm Ram size: 3,700 x 2,700 mm Ram stroke: 1,000 mm Gbodox R U Idopfx Ah Heg Max. vertical clearance: 1,590 mm Die opening at BDC: 610 mm Lower blankholder stroke: 400 mm Movable bolster: Present at the front

Condition: good (used), Hydraulic motor, oil motor, hydraulic pump, hydraulic gear motor -Manufacturer: Danfoss, hydraulic motor with gearbox -Hydraulic motor: Danfoss Type: OMP 50 151-0028 6 -Gearbox: Nord SK 01 FF i= 5.83 -Hole spacing: 106 x Ø13 mm -Shaft: Ø20 x 40 mm -Bolt circle: Ø 100 x 7 mm -Dimensions: 310/140/H180 mm Gbsdpfxewldupe Ah Hjg -Weight: 13.5 kg

Condition: used, Year of construction: 1991, Technical details: Pressure: 160 t stroke: 500 mm throat: 360 mm Gbjdpfx Aew D Awmsh Heg max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250 x 630 x 100 mm passage opening in table: 4x D=62 mm ram speed - forward: 200 m/s ram speed - reverse: 125 m/s ram surface area: 450 x 850 mm mortise hole in ram: 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump -Hand hydraulic pump: with cylinder, unfortunately no type designation -Stroke: 45 mm -Piston rod: Ø 32 mm -Dimensions: see drawing in the photos Gjdpfx Ahjgua Hhj Hobg -Dimensions: 645/230/H480 mm -Weight: 50 kg

Condition: used, Technical details: Gbodpfxou Nfpue Ah Heg pressure: 160 t table surface area: 1.260 x 600 (vertical) mm table plate diameter: 1260 x 600 x 70 (vertical) mm ram surface area: 700 x 360 mm throat: 300 mm weight of the machine approx.: 9000 kg dimensions L x W x H: 3,7 x 1,5 x 2,2 m distance base - ram: 1.000mm mounted ram construction: L:660 x W:300 x H:370mm rollers 1x on the right and 1x on the left with vertical adjustment 250mm. (Ø 80x300mm) *

Condition: used, Year of construction: 2003, Technical details: Pressure: 60 t stroke: 400 mm table surface area: 700 x 700 mm passage opening in table: Ø 100 mm distance between columns: 700 mm distance between columns: 700 x 1300 mm table height over floor: 850 mm dayligth: max. 1150 mm daylight dimension : table/slide up: 400 - 800 mm cylinder diameter: Ø 110 mm total power requirement: 4,8 kW machine weight approx.: 930 kg dimension machine xH: 1,2 x 0,7 x 3,0 m Godsvrygijpfx Ah Hobg HYDRAULIC DOUBLE COLUMN PRESS Special construction welded from 25 mm sheet steel Operating mode: single stroke Punch holder: pin M 70 x 2.5mm and punch Ø 128 x 440mm Table protection housing Round punch Ø 130 x 120 mm Hydraulic unit *

Condition: used, Year of construction: 2004, Technical details: throat: 510 mm working pressure: 250 bar Punching capacity: 1000 kN t round bar steel: bis Ø 65 x 12 und bis Ø 90 x 8,5 mm electr. connected load: 400V / 50Hz total power requirement: 7,5 kW weight of the machine ca.: ges. 2,6 t dimension machine xH: 1,9 x 1,0 x 2,1 m dimensions L x W x H: Wkz.-Schrank: 0,7 x 0,35 x 0,9 m hydraulic section steel shear Heavy-duty, robust electro-hydraulic hole punch with large throat depth -Punching device: punch holder with punch quick-change device up to Ø 31 mm, stripper size L: 360 x W: 300 mm -Punching table: LxW: 360 x 300 mm, punching support 360 x 300 mm with adjustment device and die holder Ø 50 x 25 mm (equipped with die Ø 16 mm) Number of strokes: -with 10 mm stroke = up to 45 strokes/min. -with 30 mm stroke = up to 22 strokes/min. -with 50 mm stroke = up to 14 strokes/min. Punching stroke: min. 10 mm and max. 50 mm Stroke length and stroke position adjustable Equipped with punch Ø 16 mm Foot switch The punching capacities refer to a material strength of 400 N/mm². Accessories: Various punching tools Punches and dies i.D. Gbjdpfeu Ick Tsx Ah Hsg *

Condition: used, Technical details: pressure: 25 t distance between columns: 360 mm stroke: 500 mm daylight dimension : table/slide up: 800 mm Gbsdsu U D I Rjpfx Ah Hsg throat: 360 mm ram stroke: 500 mm ram speed - forward: 0,200 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 71 mm passage inside table: Ø 182 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 x 72 mm ram diameter: Ø 125 mm height over floor: 710 mm total power requirement: 12,5 kW weight of the machine ca.: 2,4 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel (and one-hand operation in set-up mode) Continuous and single stroke TÜV until *

Condition: used, Technical details: pressure: 25 t stroke: 500 mm daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm Gbodpfx Ahjvc Awxe Hsg passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 mm height over floor: 710 mm total power requirement: 8,75 kW weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm Gbedpfovc Ax Nox Ah Hsg height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW Gjdpfx Aou Rni Hoh Hebg weight of the machine ca.: 4,56 t dimensions of machine: L: 2,3 x B: 3,7 x H: 1,8 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet *

Condition: used, Year of construction: 1960, Technical details: Godpfx Aou Nfudsh Hobg pressure: 10 t throat: 255 mm max. ram stroke: 400 mm ram speed - reverse: 0,180 m/sec. m/sec. ram speed - forward: 0,080 m/sec. m/sec daylight dimension : table/slide up: 630 mm daylight dimension : table/slide low: 230 mm table clamping surface:: 420 x 400 mm passage opening in table: 220 mm surface area of ram: 200 x 200 x 65 mm total power requirement: 1,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 1,1 x 0,5 x 2,1 m

Condition: used, Year of construction: 1992, Technical details: sheet width: 4050 mm plate thickness: 16 mm distance between columns: 4900 mm control for program: Robosoft SC5 Controller back gauge: 1000 motorisch cutting angle: 0,5° - 3° ° cutting gap adjustment: ja / jes mm down holder: 23 Stück height over floor: 1030 mm Table dimensions: L x B 4000 x 520 mm weight of the machine ca.: 19,2 t dimensions of machine: 5,2 x 2,2 x 2,78 m characteristics: - knife length 4100mm, 4 turns possible - Number of strokes: 5 - 11 strokes/min. - Table: side stop with linear scale, with stop bar 1000mm removable, feed aid via / with ball bearings Godpfxou Icpcs Ah Hsbg - front support: LxWxH: 1600 x 1100 x 1000 mm; movable over roller rail, easy handling - backgauge adjustable, motor driven and foldable Operation via control panel with jib lenmgth arm and foot control Equipment: - light grid at backgauge - cut line ilumination Accessories: - 1 set (2 pieces) shearing blades *