Used Hydraulic Truck Shovel for sale (40,799)

Condition: used, Year of construction: 1997, pressure 40 t throat 300 mm stroke 630 mm dayligth 900 mm table surface area 620 x 520 mm hole in the table 150 mm table height over floor 600 mm ram surface 150 mm total power requirement 15,0 kW weight of the machine ca. 4,5 t required space 1,0 x 1,9 x 3,0 m Lhodpfxovuucko Afajc permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1993, pressure 2 x 6,3 t stroke 307 mm throat 180 mm dayligth 900 mm table surface area 470 x 360 mm table height over floor 810 mm ram surface 45 mm feed down 137 mm/s feed up 33 mm/s working feed 540 mm/s oil volume 140 l power requirement 3,0 kW Weight 1,5 t dimensions of the machine ca. 1,2 x 1,2 x 2,8 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation Press has 2 Press shafts - press force 2 x 6,3 t Ljdpfjvut Rmsx Afaohc

Condition: used, Year of construction: 2004, pressure 63 t Lhjdpsvut H Isfx Afaoc stroke 160 mm throat 280 mm dayligth 360 mm table surface area 560 x 490 mm table height over floor 860 mm ram surface 280 x 280 mm power requirement 22,0 kW Weight 3,6 t dimensions of the machine ca. 0,8 x 1,7 x 2,8 mxmxm hole in the table 125 mm yom 1980 - Modernization of control (Siemens S 7) in 2004 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: used, Electric Lift Table – Walkie Stacker, Pedestrian Pallet Stacker For ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 225 (lift2move) Ledpfeflt Egex Afajhc Serial No. 19153-HD Year of manufacture: 2010 Model No.: Rated load capacity: 225 kg Lift travel: 1770 mm Lift height: 2350 mm Lifting speed (unladen / laden): approx. 100 / 75 mm/s Load cantilever: 400 mm Chassis length: 1130 mm Underride height: 90 mm Underride length: 600 mm Chassis version (front / rear): Ø 80 / 150 mm (2 fixed castors / 2 swivel castors) Overall length: 1130 mm Overall width: 600 mm Overall height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lift drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Wired remote control with spiral cable and button for 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 x 12 Volt, 17 Ah lead-acid batteries installed in the battery pack, battery NEW - External charger 24 VDC, 3 Amp (mains voltage 230 V, 50 Hz) - Manually movable, steering castors with three-stage parking brake - Continuously height-adjustable handlebar - Load mounting flange as per EXPRESSO standard 380 x 50 mm / 4 mounting holes M10, spacing 100-120-100 mm Fitted lifting aid: Four-prong fork attachment, Expresso type, Rated load of lifting aid: 40 kg - Lifting aid manually swivelled by 90° (lockable only in 0° position) - Lifting aid laterally adjustable on linear guide by ±100 mm (locking only in center) - Width between support arms: 320 mm - Height between support arms (lockable at): 365 / 400 / 450 mm (max. opening without locking holes: 510 mm) - Depth between support arms: 150 mm up to stop bolt / 300 mm max. Total weight: 100 kg Good condition

Condition: used, Electric Loading Lift – Pedestrian Stacker, Tiller Stacker for ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 175 (lift2move) Serial No.: 19152 Year of manufacture: 2010 Type No.: Rated capacity: 175 kg Lift travel: 1090 mm Lift height: 1780 mm Lifting speed (unloaded / loaded): approx. 100 / 75 mm/s Reach of lifting aid: 800 mm Chassis length: 1100 mm Underride height: 175 mm Underride length: 670 mm Chassis version (front / rear): Ø 120 / 150 mm (2 swivel castors / 2 swivel castors) Total length: 1220 mm Total width: 700 mm Overall height: 1950 mm Maximum height: 2870 mm (with lifting aid fully extended) Motor power: 400 W Battery capacity: 24 V / 17 Ah - Electric lift drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with coiled cable and buttons for 2 lifting speeds Lodpfxeflt Efe Afaohc - Battery pack with quick-change system - Charge status indicator - 2 x Lead-acid batteries, 12 Volt, 17 Ah in battery pack - External charger 24 VDC, 3 Ampere (mains voltage 230 V, 50 Hz) - Manually maneuverable, swivel castors with three-stage parking brake - Continuously height-adjustable handle - Load carriage double flange according to EXPRESSO standard, 2 pieces mounted on top of each other, each 280 x 50 mm / 4 mounting holes M10 Mounted lifting aid: Rotatable Roller Mount Expresso Type 04175470 Lifting aid load capacity: 70 kg Rotation via electric drive with stepless speed control Rotation range: 360° continuous Roller arms individually adjustable steplessly on linear guides Roller arm span min./max.: 1350 - 2050 mm (infinitely adjustable) Roller arm depth: 560 mm In the center of the roller arms is a workpiece holder (adjustment range 0 - 80 mm) Total weight: 150 kg good condition

Condition: used, Electric Load Lift – Pedestrian Stacker, Pallet Truck For ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 175 (lift2move) Serial No.: 19153 Year of manufacture: 2011 Type No.: Rated capacity: 175 kg Lift travel: 1880 mm Lifting height: 2760 mm Lifting speed (unladen / laden): approx. 100 / 75 mm/s Lifting aid outreach: 730 mm Chassis length: 970 mm Underride height: 90 mm Underride length: 485 mm Chassis configuration (front / rear): Ø 60 / 100 mm (2 swivel castors / 2 swivel castors) Overall length: 1220 mm Overall width: 600 mm Construction height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Wired remote control with spiral cable and buttons for 2 lifting speeds - Battery pack with quick-change system - Charge level indicator - 2 pcs lead-acid battery 12 Volt, 17 Ah integrated in battery pack - External charger 24 VDC, 3 Amp (mains voltage 230 V, 50 Hz) - Manually maneuverable, swivel castors with three-stage parking brake - Infinitely adjustable handgrip height - Load mounting flange according to EXPRESSO standard 280 x 50 mm / 3 mounting holes M10 spaced 110-110 mm Fitted lifting aid: Pivoting jib arm Lifting aid load capacity: 60 kg Lhodpfofr Izgox Afaoc Pivoting range: ±30° (lockable only at 0°) Jib arm length: 600 mm - Steplessly adjustable load eye, hole diameter 30 mm Total weight approx. 100 kg good condition

Condition: used, Electric loading lift – pedestrian stacker, pallet stacker truck For ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 225P (lift2move) Serial No.: 19500S Year of manufacture: 2008 Type No.: Rated load capacity: 225 kg Lift travel: 1680 mm Lift height: 2200 mm Lifting speed (unloaded / loaded): approx. 100 / 75 mm/s Lifting aid outreach: 861 mm Chassis length: 1020 mm Underclearance height: 90 mm Underclearance length: 600 mm Chassis design (front / rear): Ø 80 / 140 mm (2 fixed castors / 2 swivel castors) Overall length: 1400 mm Overall width: 600 mm Overall height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Handheld remote control with spiral cable and 2 lifting speeds Lsdpfx Afoflt Edsashc - Battery pack with quick-change system - Charge level indicator - 2 lead-acid batteries 12 Volt, 17 Ah installed in battery pack - External charger 24 VDC, 3 Amperes (mains voltage 230 V, 50 Hz) - Manually maneuverable, swivel castors with three-stage parking brake - Continuously height-adjustable handle - Load pick-up flange as per EXPRESSO standard Special version: Lifting aid by GIESLER for radial fan SC-1000 CP XT (Tiger) - Lifting aid load capacity: 25 kg - Lifting aid can be swivelled 90° via manual hydraulic pump - Jaw opening between support jaws: 300 / 330 mm - Jaw opening between clamping rollers: 200 – 300 mm - Clamping via handwheel - Lifting aid net weight: 60 kg Total weight: 140 kg Very good condition

Condition: used, Machine not operational – control system not running Special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Serial No. 300487 Year of manufacture: 2006 Pressing force: 500 tons Column gap front and rear: 2520 mm Table surface: 2500 x 2500 mm Ram surface: 2500 x 2500 mm Ram stroke: 600 mm Installation height max.: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable approach speed: 100-800 mm/s Pressurization to 5000 kN: approx. 0.7 sec. Lodpfx Aodzqptofashc Return speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-position flat guide for the ram - Hydraulic ram locking at TDC - Freestanding control cabinet (200 x 50 cm) - Siemens PLC control S7-314 - Operation via Siemens OP 170-B (5.7”) - Two-hand control desk, freestanding - Floor-level installation - Table plate 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication - Operating manual with circuit diagrams Required space (L x W x H): 372 x 260 x 460 cm Required space for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: used, Double-column hydraulic press SCHÖN Type SH 25 Machine no.: 4453 Year of manufacture: 1999 Pressing force: 25 tons Column width: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Connection voltage: 380 V, 50 Hz Equipment: - Safety light curtain SICK, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop Lhsdjw A Amropfx Afaec - Pressing force regulation - Adjustable pressing time 1–10 s (pressure holding time) - Adjustable return stroke speed - Blow-off device electrically pre-wired, without air valve - Manual hydraulic tool safety, adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition

Condition: used, Hydraulic unit for mobile clinching tongs or mobile shaper ECKOLD type HA 500 / 2 Serial No. 737 / 783 Year of construction 1991 Hydraulic unit type HA 500 / 2 Operating pressure 50 - 500 bar adjustable Delivery rate 2.6 l/min Tank capacity 16 liters Engine power (hydraulics) 3 kW Rated power 3.1 kW Mains connection 380 Volt, 50 Hz. Control voltage 24 Volt, DC - Pressure line with screw coupling - With HAWE GS 2-2 solenoid valve - Mobile on 4 swivel castors Weight without hydraulic oil 125 kg Lhodpfx Afjquzfcoajc good condition

Condition: used, Hydr. hacksaw (Made in Croatia) Type BS 320 Year of manufacture approx. 1980 Sawing area round Ø 320 mm sawing area square 280 x 280 mm Saw blade 550 x 45 x 2,25 mm Material infeed height 680 mm Sawing speed 42 - 55 - 85 - 110 strokes/min. motor power 1,8 and 2,4 kW pole changeable Mains connection 400 Volt, Hz - Miter adjustment up to 45 - Saw motor with 2 speeds and 2 V-belt steps - Hydraulic saw bow lowering - hydraulic cutting pressure adjustment via throttle valve - Coolant device in machine base Space requirement hacksaw L x W x H 1900 x 1350 x 1500 mm width without fence 800 mm weight approx. 750 kg Ledpfxelqadhj Afaohc good condition

Condition: used, Hydr. hacksaw, metal saw, lifting saw KASTO type PSB WBS 210 / 230 Machine. No. 115 106 1212 / 72783 Year of construction 1986 sawing area - round Ø 250 mm sawing area - square 225 x 225 mm sawing range - rectangle 260 x 100 mm Cutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. saw blade length 400 mm motor power 1,4 and 1,8 kW pole changeable mains connection 380 Volt, 50 Hz - only for 90° cuts, no miter adjustment - Saw motor with 2 speeds and 3 V-belt stages - Hydraulic saw bow feed - hydraulic cutting pressure adjustment via throttle valve - rapid motion for saw bow lowering - manual height adjustable material support table with mm scale via hand wheel - manual material clamping - coolant device in machine base - operating instructions space requirement L x W x H 1500 x 700 x 1550 mm weight 590 kg Lsdpfeifu Aysx Afaehc very good condition

Condition: used, Hydraulic scissor lift table GRUSE type ELS 0.5-8-1-G-SO Make No.: 124984 Year of construction 2017 Lodjixq Hnjpfx Afashc lifting capacity 300 kg platform size 1250 x 800 mm useful stroke max. 785 mm Overall height - table bottom 345 mm Overall height - table top 1130 mm Motor power 0,8 kW Mains connection 400 Volt, 50 Hz - foot switch for up and down, with emergency stop and key switch for control on - single shear with one lifting cylinder - revolving safety contact strip with limit switches under the upper frame - adjustable limit switch for the upper lifting restriction - Table top with sturdy wooden worktop and airliner rails with lashing eyes - hydraulic power unit with tank mounted under the table - feet under the table corners, mobile with lift truck own weight 250 kg very good condition, almost as new

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 Lodpeh Uhqyefx Afaehc pressure force 2,5 ton. throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm clamping spigot bore Ø 20 mm ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8,3 mm/sec. Table height above floor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read off operating hours - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg very good condition

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator Lodpfehrakvox Afashc - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Condition: used, Hydr. scissor lift table WEIDMANN type E5/13-1 Serial no. 30403339 Year of construction 1982 / 2007 Load capacity 500 kg Platform size 2000 x 1200 mm Lift max. 1280 mm Lhjdpfx Afjhlnznjaec Overall height - table bottom 290 mm Overall height - table top max. 1570 mm Table height with safety support 1430 mm Lifting speed 1280 mm in 25 sec. Lowering speed 1280 mm in approx. 0 to 15 sec. Hydraulic operating pressure approx. 130 bar Motor power 1.5 kW Mains connection 400 Volt, 50 Hz. - Rotary switch on the hydraulic unit for up and down - Infinitely adjustable lowering speed via throttle valve - 1 lifting cylinder - Hydraulic unit built in 2007 with tank opposite - Safety protection frame with limit switches dead weight 660 kg good condition

Condition: used, Hydraulically shiftable gearbox for changing rotation direction Hydraulic reversing gearbox from lathe Year of manufacture approx. 1985 Change gearbox for quick reversal of rotational direction to right or left - electric hydraulic pump for hydraulic pressure generation (380 Volt, 0.25 kW) - 2 solenoid valves for switching from right-hand to left-hand rotation - fitted with pulleys Ø 230 and 200 mm - was operated with a 15 kW drive motor, enables rapid change of direction with high torque transmission - drive motor always runs to the right, gearbox is hydraulically shifted to right, left or set to neutral without activation Overall dimensions L x W x H: 480 x 520 x 430 mm Weight: 170 kg Good condition Lededz Sp Dopfx Afajhc

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Lhedpfer I E Itex Afaoc Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: used, Single-column hydraulic press MAE type S63SZ SO Lodedzp Trepfx Afaohc . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop - Two-hand operation - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Weight approx. 5 tons The machine is operational, the control cabinet is mechanically damaged. During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. Ljdpfx Afodzp Tcjaehc good condition

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 6413283, Year of construction: 2016, lifting height: 1,14,500 mm, fuel type: electric, mast type: triplex, power: 11 kW (14.96 HP), battery voltage: 48 V, battery weight: 1,920 kg, color: orange, Equipment: hydraulically sliding cabin, Up to 4 Toyota narrow aisle forklifts for sale. Having been sourced from a large industrial facility, these units are technically in a solid, well-maintained condition. All 4 forklifts have just received a fresh service. Technical details: Model: VCE150A Year of manufacture: 2016 Aisle width: 1,400-1,800 mm Rated capacity: 1,500 kg Own weight (without battery): 7,475 kg Battery voltage: 48 V Battery weight: min. 1,785 kg / max. 1,920 kg Maximum lift height: 11.45 meters Actual load capacity at max. height: 1,375 kg Load center: 620 mm System: Man-Up (operator is lifted with the load) Guidance: Equipped with inductive guidance system Special feature: Articulated chassis (bend steering) for minimal space requirement during aisle changes. Transport and loading can be organised Europe-wide for an additional fee, upon request. All prices are subject to VAT. Viewing possible by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you planning to sell yours? Lhodpfx Aoylixxjfasc For further information or contact options, visit our website.

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 51600 € 975.24 € 3080 mm 6 mm 4 mm 350 mm 20 1/min 0.5 - 2 ° 16 20 to 1000 mm 200 mm/s 11 kW 125 l 3 Stk. 820 mm 494 mm 3280 mm 4100 mm 2050 mm 3650 mm 1950 mm 7980 kg linear guided CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity USB port cutting line illumination foldable ball screws for back gauge Lhjdowirwtjpfx Afaec balls in table foldable finger protection, 1.000 mm side lay with T-slot, tilting cam and scale 3 support arms wit T-slots oilfilling light barrier on the back of the machine user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 145000 € 2740.5 € 6080 mm 6 mm 4 mm 350 mm 10 1/min 0.5 - 2 ° 29 20 to 1000 mm 200 mm/s 22 kW 200 l 5 Stk. 900 mm 630 mm 6370 mm 7300 mm 2150 mm 3400 mm 2750 mm 25500 kg linear guided CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity USB port Ledpfjwiqygex Afajhc CNC controlled cutting gap adjustment by the table (patented) oil cooler manual central lubrication cutting line illumination foldable ball screws for back gauge balls in table foldable finger protection, 1.000 mm side lay with T-slot, tilting cam and scale 5 support arms wit T-slots oilfilling light barrier on the back of the machine user manual in GERMAN and ENGLISH PRICE FCA TURKEY (sample photo)

Condition: excellent (used), functionality: fully functional, installation height: 500 mm, pressing force: 120 t, table width: 600 mm, table length: 1,000 mm, operating speed: 59 mm/s, overall weight: 6,000 kg, reverse speed: 180 mm/s, distance table to ram: 800 mm, clearance between the columns: 850 mm, stroke length: 300 mm, operating pressure: 290 bar, pressing speed: 11 mm/s, Used hydraulic press (120t) in good and fully functional condition with modern electrical system. The press is mounted on rollers, allowing for flexible use as a mobile unit. Lhedpsylk Easfx Afaec

Condition: used, Year of construction: 2019, operating hours: 7,219 h, lifting height: 5,150 mm, free lift: 1,730 mm, fuel type: electric, mast type: triplex, fork length: 990 mm, fork width: 650 mm, total height: 2,330 mm, total length: 1,650 mm, total width: 1,300 mm, color: other, Empty weight: 3.335 kg Lifting capacity: 1.200 kg - Year: 2019 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No Lhodpfx Ajycip Eefaoc - Serial number: 511901V00244 - Operating hours: 7219 - Lifting capacity: 1200kg - Lifting height: 5150mm - Overhead clearance: 2250mm - Free lift: 1730mm - Fork length: 990mm - Maximum fork width: 650mm - Minimum fork width: 210mm - Attachment: 4th valve to fork carriage, Side-shift - Options: Camera, Joystick, Free-lift, Non-marking tires - Mast: Triplex - Inspection valid until: 03-2026 - Drive: Electric - Brand/Type: 4 HPZS 620 - Battery year of construction: 2017 - Capacity: 620Ah - Battery voltage: 48V - Battery test result: 64% - Driving direction: 2 Road - Transport dimensions: 1650mm x 1300mm x 2330mm (l x w x h) - Transport weight [kg]: 3335kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom