Used Hydraulic Vice for sale (17,455)

Condition: used, axle configuration: > 3 axles, first registration: 01/2019, loading space length: 9,200 mm, loading space width: 2,540 mm, loading space height: 900 mm, total length: 13,800 mm, total width: 2,540 mm, suspension: air, tire size: 245/70R17.5, wheelbase: 10,160 mm, color: red, Equipment: ABS, 1 x lift axle 3 x steering axle. Radio-remote steering. Tjdpszp Drysfx Airod Hydraulic ramp. Camera. = Further information = Axle configuration Tire size: 245/70R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Dual tires; Tire tread depth left inside: 50%; Tire tread depth left outside: 50%; Tire tread depth right inside: 50%; Tire tread depth right outside: 50% Rear axle 2: Dual tires; Steered; Tire tread depth left inside: 30%; Tire tread depth left outside: 30%; Tire tread depth right inside: 30%; Tire tread depth right outside: 30% Rear axle 3: Dual tires; Steered; Tire tread depth left inside: 40%; Tire tread depth left outside: 40%; Tire tread depth right inside: 40%; Tire tread depth right outside: 40% Rear axle 4: Dual tires; Steered; Tire tread depth left inside: 60%; Tire tread depth left outside: 60%; Tire tread depth right inside: 60%; Tire tread depth right outside: 60% Weights Unladen weight: 11,344 kg Payload: 54,656 kg GVWR: 66,000 kg Maintenance APK (technical inspection): valid until 02/2027 Identification Model number: max trailer N/A F-S44 / STEERING = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po ryccki We make every effort to provide accurate information. However, no rights can be derived from the texts provided.

Condition: excellent (used), mileage: 6,03,504 km, power: 471 kW (640.38 HP), first registration: 04/2019, fuel type: diesel, tire size: 385-65 R22,5, axle configuration: 6x2, wheelbase: 3,300 mm, fuel: diesel, fuel tank capacity: 460 l, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6c, suspension: air, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, airbag, central locking, differential lock, electric window regulation, fog lights, fridge, hill-start assist, navigation system, onboard computer, parking heater, power assisted steering, seat heater, soot filter, spoiler, traction control, - Alarm - Aluminum fuel tank - Heated mirrors - Brake booster - DAB radio - Roof spoiler - Differential lock - Low noise - Speed limiter - Isofix - Tilting hydraulics - Air conditioning - LED lighting - Leather interior Tsdpfsz Avxfjx Airod - Leather upholstery - Air suspension - Air-suspended seats - Air horn - Metallic paint - Driver fatigue detection - Panoramic sunroof - Particle filter - Radio/MP3/CD system - Radio/CD player - Radio/cassette player - Rain sensor - Spare tire - Rear view camera - Saddlebag - Sleeper cabin - Side door - Side skirts - Lane keeping assist - Stability control - Auxiliary heater - Blind spot monitoring - Immobilizer - Windshield - Power take-off (PTO) General information Year of construction: 2018 Technical information Number of cylinders: 6 Engine displacement: 15,256 cc Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385-65 R22.5; Alloy rims; Steered; Tire tread left: 80%; Tire tread right: 80% Rear axle 1: Tire size: 315-80 R22.5; Dual tires; Alloy rims; Tire tread left inner: 80%; Tire tread left outer: 80%; Tire tread right inner: 80%; Tire tread right outer: 80% Rear axle 2: Tire size: 315-70 R22.5; Dual tires; Alloy rims; Lift axle; Tire tread left inner: 30%; Tire tread left outer: 30%; Tire tread right inner: 30%; Tire tread right outer: 30% Weights Unladen weight: 9,600 kg Payload: 16,400 kg GVWR: 26,000 kg Interior Upholstery: Leather Condition Technical condition: very good Optical condition: very good Damage: none Further information Please contact Jeroen Kuipers or Job van Eldik for more information. Curious about what we can do for you? Contact our sales team today! Our team of experienced specialists is available to you every day to assist you in finding the right vehicle. Would you like to see for yourself? Simply arrange a test drive and experience the vehicle yourself. At KW-Automotive, you will find a large selection. We always have at least 50 high-quality light commercial vehicles and trucks in stock. This way you are guaranteed to find a vehicle that meets your requirements and your budget. Every year, we support hundreds of satisfied customers – both in the Netherlands and abroad. Why KW-Automotive? Personal service Reliable vehicles Attractive prices Fast delivery, so you can get started right away Fast communication by phone and WhatsApp Sales and delivery also abroad For many years we have been a reliable partner for our customers – and we are proud of that. Please note: All selling prices are plus preparation and delivery costs. Would you like to know more about a specific vehicle? Visit our website with detailed information, videos and technical details. Do you need a quick answer? Just write to us via WhatsApp! We will send you further information, photos or a...

Condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (please call ). Hydraulic ditch cleaning bucket / swiveling / Liebherr SW33 / 2,000 mm cutting width / in stock & immediately available Price: €2,990.00 net / €3,558.10 gross - Cutting width (mm): 2,000 - Weight (kg): 1,022 Features: - incl. Liebherr SW33 mounting In our warehouse, we have a very large selection of various buckets that are immediately available! Mr. Herden (Tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Magni telescopic handler sales and service partner. Tjdpfxozd Nm Es Airjd We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No.: 040404 = Further information = New: No Intended use: Construction Unladen weight: 1,022 kg Please contact Marius Herden for more information.

Condition: excellent (used), mileage: 10,12,288 km, power: 537 kW (730.12 HP), first registration: 03/2016, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Equipment: AdBlue, air conditioning, central locking, fridge, retarder, seat heater, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Ventilated seats - Roof spoiler - Leather interior - Leather upholstery - Air suspension - Air-suspended seats - Rear view camera - Sleeper cabin - Side skirts - Power take-off (PTO) = Additional Information = Year of construction: 2016 Brakes: Disc brakes Suspension: Air suspension Front axle: Steered; Tire tread depth left: 70%; Tire tread depth right: 70% Rear axle 1: Double tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Rear axle 2: Double tires; Lift axle; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Upholstery: Leather Technical condition: very good Optical condition: very good = Company Information = Curious about what we can do for you? Contact our sales team today! Our team of experienced specialists is available to you every day to assist you in finding the right vehicle. Would you like to see for yourself? Simply arrange a test drive and experience the vehicle yourself. At KW-Automotive, you can expect a wide selection. We always have at least 50 high-quality light commercial vehicles and trucks in stock. This way, you are guaranteed to find a vehicle that meets your requirements and your budget. Every year, we support hundreds of satisfied customers – both in the Netherlands and abroad. Why KW-Automotive? Personal service Tedjzcyauepfx Airsd Reliable vehicles Attractive prices Fast delivery so you can get started right away Quick communication via telephone and WhatsApp Sales and delivery also to foreign countries For many years, we have been a reliable partner for our customers – and we are proud of that. Please note: All sales prices are exclusive of preparation and delivery costs. Would you like to know more about a specific vehicle? Visit our website with detailed information, videos and technical details. Do you need a quick answer? Simply write to us via WhatsApp! We will send you further information, photos or a video immediately. Job van Eldik

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 11,600 kg, permissible axle load (axle 2): 11,600 kg, permissible axle load (axle 3): 11,600 kg, first registration: 03/2015, loading space length: 19,800 mm, loading space width: 2,750 mm, loading space height: 3,800 mm, total length: 19,800 mm, total width: 2,750 mm, total height: 3,800 mm, suspension: air, tire size: 245/70-R17.5, Equipment: ABS, = Additional Options and Accessories = Tedjzz Scdopfx Airod - EBS - Lifting axle - Air suspension - Drum brakes = Notes = BROSHUIS E-2190/27, year of manufacture 2015, 3-axle low-bed trailer in very good condition, extendable by 6.40 m, 275 cm wide (expandable to 320 cm), hydraulic ramps (300 x 80 cm) + 2 small loading ramps for the gooseneck, ABS/EBS, SAF axles with drum brakes, 1st axle = lift axle, 3rd axle = steering axle (trailing axle), loading platform height: 90 cm, widening extensions + lashing points + stake pockets + swivel locking eyes, 4 width markings + all-round lights, hardwood floor, twin tires at the rear with 245/70-R17.5 tires (tread depth left: 11/11, 10/11 mm; tread depth right: 9/9, 8/7, 11/9 mm), unladen weight: 12,130 kg, permissible total weight: 52,800 kg, Belgian registration with valid technical inspection. Inspection valid until 04.10.2027. = Additional Information = General Information Year of construction: 2015 Axle Configuration Tire size: 245/70-R17.5 Axle brand: SAF DRUM Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Lift axle; Max. axle load: 11,600 kg; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 55%; Tire tread depth right outer: 55% Rear axle 2: Twin tires; Max. axle load: 11,600 kg; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 50%; Tire tread depth right outer: 55% Rear axle 3: Twin tires; Max. axle load: 11,600 kg; Steered; Tire tread depth left inner: 70%; Tire tread depth left outer: 60%; Tire tread depth right inner: 55%; Tire tread depth right outer: 70% Weights Unladen weight: 12,130 kg Payload: 40,670 kg GVW: 52,800 kg Functional Body brand: Brosuis E-2190/27 Loading platform height: 90 cm Extendable body: Yes Maintenance, History and Condition Technical inspection (APK): valid until 10.2027 Technical condition: very good Optical condition: very good Further Information Please contact Arne Honingh for further information.

Year of construction: 1994, condition: good (used), machine/vehicle number: 24.105, A used, well-maintained hydraulic press brake HATASTAR, equipped with: - CYBELEC DNC 70 control system - Controlled axes Y1, Y2, X, R - Hydraulic upper tool clamping - Hydraulic crowning - FIESSLER AKAS safety system - Tools - Press brake manual - Documentation Bending length 4600 mm Frame width 4100 mm Pressing force 1350 kN Stroke 220 mm Rapid traverse 140 mm/sec Tedpfx Aiofthzksrjd Working speed 10 mm/sec Return speed 100 mm/sec Further technical data can be found in the PDF document. Technical data and dimensions: Subject to change.

Condition: excellent (used), mileage: 6,38,291 km, first registration: 08/2014, fuel type: diesel, axle configuration: 6x4, wheelbase: 3,200 mm, fuel: diesel, fuel tank capacity: 600 l, brakes: engine braking, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, navigation system, power mirror, soot filter, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Brake booster - Roof spoiler - Low noise - Speed limiter - Air suspension - Air horn - Particulate filter - Sleeper cab - Sun visor - Stability control - Power take-off (PTO) = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 10,300 kg Tsdpfouxvpwjx Airod Transmission Transmission: I-SHIFT, automatic Axle configuration Front axle: Steered Rear axle 1: Twin tires Rear axle 2: Twin tires Condition Technical condition: very good Visual condition: very good Financial Information Price: On request VOLVO FH 500 6X4 Tractor Unit EURO 6 L PACKAGE 500 HP DRIVE: 6X4 PLANETARY AXLE AIR SUSPENSION WHEELBASE 320 CM FH GLOBETROTTER CABIN OPTIONS: - AIR CONDITIONING (CLIMA) - NAVIGATION SYSTEM - REFRIGERATOR - MICROWAVE I-SHIFT AUTOMATIC TRANSMISSION ALUMINUM FLOOR LED HYDRAULIC CONNECTIONS LARGE DIESEL TANK 600 LITERS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 1,200 kg, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, reverse speed: 14 mm/s, total length: 1,150 mm, total width: 850 mm, total height: 1,800 mm, Special Offer – 5% Discount Available! Hydraulic C-Frame Press – 250 kN (25.5 Tons) The Hydraulic C-Frame Press is a professional industrial machine designed for precise pressing, straightening, bending, assembling and forming operations. Its open C-frame construction provides excellent access to the working area, allowing convenient machining of larger workpieces and easy material handling from multiple sides. The rigid welded steel frame ensures maximum stability, durability and long service life. The precision hydraulic system provides smooth control of both pressing force and ram speed, delivering reliable performance and high machining accuracy. This versatile press is suitable for industrial production, maintenance departments, tool rooms, metalworking workshops and automotive applications. Main Features • Pressing force of 250 kN (approx. 25.5 tons) • Open C-frame design • Heavy-duty welded steel construction • Precise hydraulic control Tsdpfoyr Ek Rex Aired • Smooth ram movement • Excellent access to the working area • Suitable for industrial and workshop applications • CE certified Technical Specifications • Pressing force: 250 kN (approx. 25.5 tons) • Maximum hydraulic pressure: 25 MPa • Maximum opening: 500 mm • Ram stroke: 200 mm • Table dimensions: 500 × 400 mm • Throat depth: 200 mm • Downward speed: 10 mm/s • Return speed: 14 mm/s • Motor power: 3 kW • Packed dimensions (L × W × H): 1100 × 850 × 1800 mm • Weight: 1200 kg Applications • Pressing • Bending • Straightening • Assembly operations • Metal forming • Metalworking workshops • Automotive industry • Tool rooms • Industrial manufacturing Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, warranty service and professional after-sales support. We provide professional transport throughout Europe using specialized machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.

Condition: new, axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, loading space length: 29,000 mm, loading space width: 2,540 mm, loading space height: 2,850 mm, total length: 29,000 mm, total width: 2,540 mm, total height: 2,850 mm, suspension: air, tire size: 385/65-R22.5, Equipment: ABS, - BPW axles - EBS - Air suspension - Disc brakes - Central lubrication system NEW MAX210-Z-3AA-13.60-22.5-2.54, available directly from stock Technical data MAX210-Z-3AA-13.60-22.5-2.54 Total weight: 48,000 kg / Coupling pressure: 18,000 kg / Axle load: 30,000 kg / Tare weight: 11,456 kg / Payload approx.: 36,544 kg / Coupling height (laden): 1150–1250 mm / Turning radius: 2300 mm Loading area length: 13,600 mm / 2-way extendable (2 x 770 mm) to 2900 mm / Wheelbase: 1810 mm Technical description: Extendable loading area with pneumatic locking / A fixed intermediate table of ± 250 mm is located in the central box structure. / 8 pairs of lashing eyes that fold outwards (LC 5,000 daN) / 3 pairs of lashing eyes that fold outwards (LC 10,000 daN) / Recesses in the outer frame for attaching lashing straps (LC 2,000 daN) Tires: Tires 385/65 R22.5 (Brand: Goodyear) Tire pressure monitoring system (TPMS): TPMS according to ECE R 141 Todpfs Aba Irsx Airod Axles: BPW axles with disc brakes, air-suspended with raising and lowering valve. All axles are hydromechanically steered. Technical axle load: 10,000 kg (ET 0) Braking system: WABCO braking system according to EU regulations with EBS-E system (2S2M), without connecting cable to the tractor. Steel structure: Steel structure made of high-quality fine-grain steel. Steel grades: S355J2+N/S355MC (Yield strength 355 MPa) / S690QL/S700MC (Yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, lighting 24 V ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the galvanized connection strip at the front with 24N, 24S and 15-pin sockets. Connections according to ISO / 24N ISO-1185 / 24S ISO-3731 / 15-pin ISO-12098 Warning signs: Below the gooseneck and at the rear, left and right, holder for warning signs with socket. Options: • Maneuverability at the front and rear via cable remote control with PDC light control for axle alignment. (without mounting on the tractor) • Electro-hydraulic unit (approx. 45 kg) • 2 wheel chocks with holder on the partition wall • Kingpin 2" • Galvanized steel partition, approx. 1600 mm high. EN12642-XL • White reflector tape according to EU regulations over the entire length and width. Red at the rear. • EU marking plates (red-yellow) at the rear of the vehicle. • Holder for a rotating beacon at the rear of the vehicle. • Loading floor made of 30 mm thick hardwood, reinforced with omega profiles (approx. 298 kg). • 10 pairs of stake holder, approx. 100 x 50 mm, in the outer frame of the loading floor. • 1 spare wheel holder under the loading floor on the right. • BEKAMAX (Pico) central lubrication system with 2 pumps. • 6 pairs of recesses in the loading floor for WADER container locks, for 1 x 20', 2 x 20', 1 x 40' or 1 x 45' container. • 5 pairs of stake profiles, mounted across in the loading floor, for stakes 100 x 50 mm • Galvanized storage compartment under the loading floor (2390 x 720 x 400 mm) • Rope hooks (8 mm), every approx. 500 mm below the edge profile of the gooseneck and the loading floor • Ladder, mounted on the left in the direction of travel • Stainless steel toolbox • LED lighting • 10 pairs of twist locks (100 x 50 mm, length 1000 mm) • 8 container General information Year of manufacture: 2026...

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ESTUN Automation, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 1.5 °, cutting angle (max.): 1.5 °, stroke rate (min.): 10 1/min, stroke rate (max.): 10 1/min, sheet thickness (max.): 10 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, table height: 800 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge travel distance R-axis: 600 mm, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 200 l, overall weight: 10,000 kg, total length: 4,050 mm, total width: 2,050 mm, total height: 1,950 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, HYDRAULIC GUILLOTINE SHEAR 10 × 3200 ESTUN E21S Controller and Illuminated Cutting Line This hydraulic guillotine shear is designed for accurate straight-line cutting of sheet metal and strips made from steel, non-ferrous metals and other compatible materials. With a maximum cutting capacity of 10 mm and a working length of 3200 mm, it is a powerful solution for fabrication workshops and industrial production facilities. The machine combines a robust hydraulic system with a motorized back gauge and ESTUN E21S controller, providing quick and repeatable positioning. The illuminated cutting line helps the operator align each workpiece accurately before cutting. Hydraulic hold-downs secure the sheet along the entire cutting length. Ball transfer units integrated into the table simplify the positioning of large and heavy sheets while helping protect their surfaces. Front support arms and a front gauge with measuring scale provide additional support and improve accuracy during repeat work. Tedpeyt Itqsfx Airjd The segmented blade design allows an individual damaged section to be replaced instead of the complete blade, helping reduce maintenance costs. Adjustable blade clearance enables the machine to be configured for different sheet thicknesses and materials. TECHNICAL DATA • Maximum sheet thickness: 10 mm • Maximum cutting length: 3200 mm • Blade rake angle: 1°30′ • Cutting frequency: 10 strokes/min • Back-gauge travel: 600 mm • Distance between side frames: 3450 mm • Blade length: 3300 mm • Table height: 800 mm • Motor power: 15 kW • Weight: 10,000 kg • Dimensions (L × W × H): 4050 × 2050 × 1950 mm • Controller: ESTUN E21S • Cutting-line indicator: Illuminated STANDARD EQUIPMENT • Motorized back gauge • Ball-guided back-gauge system • Hydraulic sheet hold-downs along the full cutting length • Segmented, individually replaceable blades • Blade-gap adjustment • Ball transfer units on the worktable • Front material-support arms • Front gauge with measuring scale • Front and rear safety guards • Foot-control pedal • ESTUN E21S controller • Illuminated cutting line CONDITION, WARRANTY AND DOCUMENTATION • Brand-new machine • 12-month warranty • Warranty and post-warranty service • CE Declaration of Conformity • Operating and maintenance manual in English This guillotine shear combines high cutting capacity, straightforward control, accurate sheet positioning and practical safety equipment. It is suitable for general fabrication work and repeat industrial production. Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to the destination. Please provide the delivery address or postal code to receive a quotation. Please visit our website to view our other available metalworking machines.

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, Equipment: CE marking, foot remote control, Used, well-maintained hydraulic swivel bending machine by Dr. Hochstrate Type: 2500x6mm Bending length: 2550mm Tjdpfx Aijz Tdixjrsd Bending thickness in steel up to 400N/mm²: 6mm Opening width of the upper beam: 300mm PLC control Power: 7.5kW Technical data and dimensions: Subject to change.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, operating hours: 540 h, pressing force: 1,000 t, stroke length: 800 mm, reverse speed: 150 mm/s, table width: 2,300 mm, table length: 3,000 mm, total length: 4,500 mm, total width: 3,500 mm, total height: 6,000 mm, overall weight: 1,01,000 kg, working height: 1,300 mm, working range: 1,300 mm, Hydraulic press 1000t - in very good condition, used for stamping first series parts from progressive tools Tsdpfjyilh Iex Aired -we bought this maschine as new for 340 000 EUR in year 2019

Condition: used, functionality: unexamined, Year of construction: 2007, control type: PLC-controlled, working width: 3,000 mm, cutting angle (max.): 3 °, sheet thickness brass (max.): 12 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 8 mm, overall weight: 8,500 kg, SP8 control system capacity 3000 x 12 mm power 22.5 kW electric stops Tedpfx Aijznvgmorsd weight 8500 kg

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ESTUN Automation, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 1.5 °, cutting angle (max.): 1.5 °, stroke rate (min.): 20 1/min, stroke rate (max.): 20 1/min, sheet thickness (max.): 4 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 2 mm, table height: 740 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge travel distance R-axis: 600 mm, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 200 l, overall weight: 5,600 kg, total length: 3,840 mm, total width: 2,175 mm, total height: 1,600 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, BRAND-NEW HYDRAULIC GUILLOTINE SHEAR 4 × 3200 E21S Controller and Laser Cutting-Line Guide The hydraulic guillotine shear is designed for accurate straight-line cutting of sheet metal and strips. It is suitable for steel, non-ferrous metals and other compatible materials. With a maximum cutting capacity of 4 mm and a working length of 3200 mm, it is an efficient solution for fabrication workshops and industrial production facilities. The machine combines a robust hydraulic system with a motorized back gauge and E21S controller, allowing quick and repeatable positioning. An illuminated laser guide clearly indicates the cutting line and helps the operator align the workpiece accurately before each cut. Hydraulic hold-downs secure the sheet along the entire cutting length. Ball transfer units integrated into the table make large sheets easier to position and help protect their surfaces during handling. Front support arms and a front gauge with measuring scale provide additional support and simplify repeat work. The segmented blade design allows an individual damaged section to be replaced instead of the complete blade, helping reduce maintenance costs. Adjustable blade clearance enables the machine to be set for different sheet thicknesses and materials. TECHNICAL DATA • Maximum sheet thickness: 4 mm • Maximum cutting length: 3200 mm • Blade rake angle: 1°30′ • Cutting frequency: 20 strokes/min • Back-gauge travel: 600 mm • Distance between side frames: 3350 mm • Blade length: 3250 mm • Table height: 740 mm • Motor power: 5.5 kW • Weight: 5600 kg • Dimensions (L × W × H): 3840 × 2175 × 1600 mm • Controller: E21S • Cutting-line guide: Laser STANDARD EQUIPMENT • Motorized back gauge • Ball-guided back-gauge system • Hydraulic sheet hold-downs along the full cutting length • Segmented, individually replaceable blades • Blade-gap adjustment • Ball transfer units on the worktable • Front material-support arms • Front gauge with measuring scale • Rear safety guard • Front safety guard • Foot-control pedal • E21S controller • Illuminated laser cutting-line guide CONDITION, WARRANTY AND DOCUMENTATION • Brand-new machine • 12-month warranty • Warranty and post-warranty service • CE Declaration of Conformity • Operating and maintenance manual in English Todeyt E Aiepfx Airjd This guillotine shear offers a practical combination of cutting capacity, operator-friendly controls, reliable sheet positioning and safety equipment. Its compact design makes it suitable for both general fabrication and repeat production work. Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to the destination. Please provide the delivery address or postal code to receive a transport quotation. Please visit our website to view our other available metalworking machines.

Condition: used, Bosch Rexroth 5.5 kW industrial hydraulic power unit with Lammers motor, Used Machine POWER UNIT / HYDRAULIC TANK (BOSCH REXROTH): Manufacturer / Brand: Bosch Rexroth Kft. Work Order No.: 3285684/30 Type: RRG Conversion Year of Manufacture / Week: 2011 / Week 20 Tank Capacity: 100 litres (dm³) Recommended Oil Grade: HV 46 Design: Robust blue-painted steel hydraulic tank with oil level indicator and inspection/cleaning opening. Operating Pressure: 80 bar Maximum Pressure: 160 bar DRIVE MOTOR: Tsdpfx Aiezzc S Norod Manufacturer / Brand: LAMMERS Elektromaschinenfabrik (Rheine, Germany) Type: 12AA 132S-4 Power: 5.5 kW (50 Hz) / 6.05 kW (60 Hz) Speed: 1440 rpm (50 Hz) / 1725 rpm (60 Hz) Voltage: 400/690 V (Δ/Y) Current: 11.3 / 6.55 A Protection Rating: IP55 (Class F insulation) OVERALL DIMENSIONS: Width: 770 mm Depth: 580 mm Height: 1400 mm

Condition: new, neu ca. 4 Monate ab Auftragse Italien 75000 € 1417.5 € 150 to 500 mm 2.500 x 2.050 mm 800 mm 20 mm/s 3 mm/s 2900 mm 2500 mm 2500 mm 5200 kg horizontal verschiebbar 2050 mm 1400 mm 1600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Tedpeynmp Tefx Airod Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve

Condition: good (used), hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, tandem pump -Manufacturer: Salami, Double hydraulic pump -Type: 2PB6.2/1PB2S-B03B2 -Flange/shaft: see photo, square 8 x 18 mm -Number: 5x pumps available Todpfevvr T Nox Airjd -Price: per piece -Dimensions: 175/80/H100 mm -Weight: 2.7 kg/piece

Condition: good (used), Year of construction: 1981, pressure 300 t Tsdpex Uru Nefx Airod passage width 1100 mm stroke 950 mm table width 1050 mm table depth 1200 mm dayligth 1180 mm weight of the machine ca. 20 t dimensions of the machine ca. 2,8 x 3 x 4,5 m

Condition: used, Year of construction: 2003, pressing force: 120 t, operating speed: 8 mm/s, overall weight: 12,000 kg, Hydraulic Press Brake Brand: Hidrogarne / Ermaksan Model: AP 4100-120 Year: 2003 Power: 11KW Weight: 12,000kg Bending length: 4100mm Force: 120t Approach speed: 80mm/s Tjdpfx Aox Tp Ausired Working speed: 8mm/s Y-axis and X-axis back gauge control with ELGO control system. PROMECAM punch holder. Supplied with: - 4m one-piece die, 90x90mm with several V openings - 4m gooseneck punch, 90mm height, in 835mm sections and some additional smaller pieces - Also comes with sets of straight and 30-degree punches (see pallet photos of punches)

Condition: excellent (used), functionality: fully functional, pressing force: 120 t, stroke length: 300 mm, operating speed: 59 mm/s, reverse speed: 180 mm/s, table width: 600 mm, table length: 1,000 mm, distance table to ram: 800 mm, clearance between the columns: 850 mm, overall weight: 6,000 kg, operating pressure: 290 bar, installation height: 500 mm, pressing speed: 11 mm/s, Used hydraulic press (120t) in good and fully functional condition with modern electrical system. The press is mounted on rollers, allowing for flexible use as a mobile unit. Tjdjylk Easpfx Airod

Condition: excellent (used), Year of construction: 1990, sheet width 3100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 12 - 50 Hub/min Todpsz N Hxnofx Airsd back stop - adjustable 1000 mm Control ELGO TYP 85 oil volume 120 ltr. engine output 13.0 kW weight 6300 kg. range L-W-H 3950 x 1950 x 1680 mm very well-maintained condition (!!) Equipment: - Electro-hydraulic guillotine shear with guided blade movement - ELGO NC "Type 85" control unit * Front control panel, swiveling (front left) - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - NC motorized backgauge * With recirculating ball screws - 1x side gauge 2,000 mm ... with T-slot + mm scale - 2x front support arms 1,000 mm ... with mm scale - Recessed grips in the support table - Front finger guard - 1x movable foot pedal - Operating manual

Condition: used, Year of construction: 2015, gebraucht 2015 090243 prompt, Zwischenverkauf v Türkei 21800 € 1 3100 mm 6 mm 4 mm 15 1/min 1.5 ° 1000 mm 15 kW 200 l 4110 mm 2200 mm 3790 mm 2100 mm 7300 kg WITH PNEUMATIC SHEET SUPPORT Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Tjdpfsz Drbcsx Airod Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMANwith EC declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Hydraulic machine vise, high-pressure clamping device RÖHM Type 740 RA 4 Jaw width: 160 mm Jaw height: 75 mm Clamping force: 4 tons Clamping range: 0 to 300 mm Opening width: max. 305 mm Clamping range: max. 100 mm (per step) Guide rail height: 85 mm Tsdsz It Rtjpfx Airsd - 3 clamping ranges adjustable via locking pins Dimensions L x W x H: 570 x 240 x 165 mm Weight: 60 kg Good condition

Condition: used, Year of construction: 1994, Max. Cutting length: 3040 mm Max. sheet thickness: 6 mm steel Controlled back stop up to 1000 mm Side stops and table extensions Tedoz Et Slspfx Airsd Hydraulic shear angle adjustment cutting length limitation Cutting edge lighting knife sharpened Weight approx. 6500 kg

Condition: used, Year of construction: 1999, Hydraulic press Dunkes HEZ 100-40, year of manufacture 1999 Tsdpfxozu Arvj Airod Hydraulic press Dunkes HS2 63, year of manufacture 1999 Eccentric press Ebu 75, year of manufacture 1985