Used Hydraulic Machine Vice for sale (99,427)

Year of construction: 2000, condition: good (used), Hydraulic machine vice Make BUSCH Type:V2 HY 94. Iiodpfx Acshcipks Ajk

Condition: good (used), I am selling a HILMA-ROEMHELD machine vice, good condition. Ijdev Upvrjpfx Ac Ajik

Condition: used, Hydro-pneumatic machine vice HILMA - ROEMHELD Type SMPH 125 Jaw width: 125 mm Jaw height: 45 mm Clamping force: 3 tons at 7 bar Clamping force: 2 tons at 5 bar Clamping range: 0 to 210 mm Maximum opening: 214 mm Guideway height: 67 mm - Hydro-pneumatic force amplifier Iiodpfoxw Rdfsx Ac Aok - 3 clamping ranges adjustable via positioning pin from 0 to 214 mm Dimensions (L x W x H): 550 x 260 x 135 mm Net weight: 33 kg in good condition

Condition: good (used), Internal article no.: 24080 Iodouxbwgopfx Ac Asik Hydraulic machine vice Manufacturer: Hilma Jaw width: 200mm Max. clamping width: approx. 340mm Dimensions (LxWxH): 70x30x17cm Weight: approx. 120Kg

Condition: good (used), hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -hydraulic machine vice -Jaw width: 125 x 45 mm Isdpjd S Ia Tefx Ac Aeik -Clamping depth: 150 mm -Dimensions: 430/210/H110 mm -Weight: 30.5 kg

Condition: used, jaw width 200 mm jaw height 67 mm Iiedpfsc Tcgcox Ac Aek span 325 mm span adjustable in three steps construction height 165 mm space requirement length - 800 x width - 300 x height - 165 mm weight approx. 116 kg

Condition: used, Hydraulic machine vice, high-pressure clamp ARNOLD / FRESMAK Iodpfx Acexp R E Ts Ajik Jaw width: 160 mm Jaw height: 50 mm Clamping force: 5 tons Clamping range: 0 to 305 mm Maximum opening: 308 mm Guideway height: 112 mm - 2 clamping ranges adjustable via locking pin, 0 to 158 and 148 to 308 mm - with rotary plate Dimensions (L x W x H): 580 x 325 x 165 mm Own weight: 65 kg Good condition

Condition: repair required (used), pneumatic hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -hydraulics defective Iijdpfedpvwiex Ac Aek -Jaw width: 160 mm -Jaw height: 53 mm -Span width: max. 340 mm -Dimensions: 550/250/H135 mm -Weight: 55 kg

Condition: used, jaw width 200 mm with specal jaws jaw height 67 mm span 325 mm span adjustable in three steps construction height 165 mm Iisdpfx Aec Tcgbec Aek space requirements length - 800 x width - 300 x height - 165 mm weight approx. 118 kg

Condition: used, Hydraulic machine vise ARNO Jaw width: 200 mm Jaw height: 60 mm Clamping force: 8 ton. Clamping range: 0 to 370 mm Opening: max 373 mm Guide rail height: 140 mm -2 socket pins adjustable clamping ranges Iedpod Amwiefx Ac Aoik -Swivel base Dimensions L x W x H: 900 x 400 x 210 mm Weight: 125 kg good condition

Condition: used, pneumatic hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -pneumatic hydraulic: machine vice -Jaw width: 160 mm -Back height: 51 mm -Span width: max. 330 mm -Dimensions: 550/200/H125 mm Iiodpfedpvwhjx Ac Aek -Weight: 47 kg

Condition: good (used), Press machine, hydraulic press, used machine Manufacturer: SEJFO Model: 7051-3 Overall dimensions: 800 x 1400 x 2480 mm Iodpfst A U Irjx Ac Asik Weight: 996 kg Stroke length: 300 mm Maximum hydraulic pressure: 140 Bar Year of manufacture: 1997 Hydraulic power supply: 380 V; 50 Hz

Condition: good (used), Grafcut G73H Hydraulic Paper Cutting Guillotine Machine in very good condition. The machine was operated in a digital printing house, with low mileage. Description: • LCD touchscreen programmer (100 programs, each with 100 steps) • Hydraulic knife and pressure drive • PLC-controlled feed • Illuminated cutting line • Stainless steel-covered tables • Additional manual knob for moving the feed beam • Mechanical foot pedal for pressure adjustment • Pressure force adjustment • Side tables • Photocells protecting the work area • Safety features: knife stop control at top dead center, two-handed operation, rear table guard • Air table Iisdox Hqnlspfx Ac Ajk • Quiet operation The machine is equipped with all safety devices and guards, and meets CE standards.

Condition: good (used), Hydraulic guillotine EBA 5560 A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, intuitive and simple operation and at the same time the parameters of a large industrial machine. The device worked in an office, it is the latest product of the German manufacturer Ideal. Year of production 2018. Control: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with 1/10 mm accuracy electronic handwheel with stepless speed regulation of the rear limiter switching mm/inch Hydraulic knife and pressure beam drive Photocells cutting line Technical data: Cutting length 550 mm Infeed height 95 / 92 – with a strip under the beam Infeed depth 570 mm Iiedpfxewunlde Ac Aok Front table depth 460 mm Minimum final cut 32 / 60 mm – with a strip Power supply 230 V / 50Hz Power 1.5 kW Weight 369 kg Dimensions 1520 x 1400 x 1370 mm

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 4203773681008, table length: 1,400 mm, table width: 600 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the machine within the specified period from 28/07/2025 to 31/07/2025. Ijdewvi N Topfx Ac Asik TECHNICAL DETAILS Table dimensions: 1,400 x 600 mm Motor: 11.4 kW MACHINE SPECIFICATIONS Overall width: 2,500 mm Overall length: 2,200 mm Overall height: 2,000 mm Total weight: 1,500 kg Operating voltage: 380 V Frequency: 50 Hz Rated current: 25 A Control voltage: 220 V with transformer Auxiliary voltage: 24 V Breaker rated short-circuit current: 0.165 kA Documents and Numbers Control number: 42037.301.01.00 Wiring diagram: 42037.301.01.01 Serial number: 42037.736.81.008

Condition: good (used), Ideal 7260 Hydraulic Paper Guillotine Machine in very good condition, ready for production. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine has a 721 mm knife length and is equipped with infrared safety curtains, a hydraulic hold-down device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable program with 99 steps each, electronic saddle position reading with 1/10 mm accuracy, and a self-diagnostic system with error messages displayed on the screen. The machine’s main work table is made of stainless steel and has a blower. A paper ejection function is included for ease of use. Technical data: Cutting length 721 mm Infeed height 80 mm Infeed depth 720 mm Front table depth 530 mm Minimum final offcut 20 mm Minimum final offcut with beam guard in place 90 mm Power supply 400 V / 50 Hz 1.5 kW Weight 588 kg Dimensions 1335 x 1305 x 1540 mm Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator (Laser), Air table (on front and rear tables), Pedal for pre-marking the cutting line, Front table made of chrome-nickel steel, Blade made of high-quality HSS steel, Safety features ensured by: safety curtains – photocells transparent safety cover on the rear table Ijdex Hqmzopfx Ac Aeik safe drive – IDEAL patent two-handed, electronically controlled cutting start automatic knife return from any position main switch equipped with a key switch knife replacement possible with the blade permanently covered

Year of construction: 2004, operating hours: 64,285 h, condition: ready for operation (used), Injection Unit Screw diameter 100 mm Clamping Unit Opening stroke 950 mm Distance between bars 1020 x 1020 mm Additional Equipment Core Valve: 1 Air Valves: 2 Iiedpfxox D Srqs Ac Aek EU 12 for Robot Connection: Yes This Netstal S 6000-5500E was manufactured in 2004. A hydraulic injection moulding machine featuring a tie bar distance of 1020 x 1020 mm and an opening stroke of 950 mm. Equipped with 1 core valve, 2 air valves, and a screw diameter of 100 mm. It also includes an EU 12 for robot connection. For more information about this hydraulic injection moulding machine, please reach out to us. Application Types Injection Moulding

Condition: used, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Iijdpfxjd Hxx Ao Ac Aek Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized control Motor power: approx. 30 kW Power supply: 400 Volt, 50 Hz - Backgauge with ELGO position control - Backgauge adjustment via ball screw spindles - SICK safety light curtain at the front for access protection - 3 material support arms with ball rollers - Electric foot switch - Spare blade - Oil cooler with air heat exchanger - Extremely heavy-duty machine in very robust construction Base machine dimensions L x W x H: 4650 x 2610 x 3200 mm Base machine weight: 27,000 kg Transport space required (base machine) L x W x H: 4650 x 2610 x 3200 mm Transport space required (additional) L x W x H: 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau. Test cuts possible.

Condition: good (used), Machine vice, vise -Jaw width: 310 mm -Jaw height: 180 mm -Clamping depth: max. 495 mm Isdsb A Iu Hepfx Ac Aoik -Weight: 150 kg

Year of construction: 2002, condition: ready for operation (used), Injection Unit Screw diameter 120 mm Injection pressure 1172 bar This Husky GL 300PET P100/110 E12O was manufactured in 2002. It features a distance between tie bars of 720 × 720 mm, a maximum mold stroke of 700 mm, and a screw diameter of 120 mm. The machine offers a screw L/D ratio of 25.0:1 and an injection pressure of 1172 bar. If you are looking to get high quality molding capabilities consider the Husky GL 300PET P100/110 E12O machine we have for sale. Contact us for more information. Iedpfx Aex D Rcnoc Asik Application Types Injection Moulding

Year of construction: 2008, condition: ready for operation (used), General Data Measurements width 3850 mm Measurements depth 5350 mm Measurements height 2250 mm Machine weight 16300 kg Ijdpfx Aox D Np Tsc Aeik This KNUTH KHT 4113 was manufactured in 2008. A robust hydraulic shearing machine, it features a cutting length of 4100 mm and thickness capacity of 13 mm. Equipped with a 30 kW motor and a substantial clamp force of 62 tons, it ensures precise and efficient operations. Machine weight is 16,300 kg. CE Certified by TÜV Rheinland. If you are looking to get high quality shearing capabilities consider the KNUTH KHT 4113 machine we have for sale. Contact us for more information. Application Types Shearing

Year of construction: 2022, condition: ready for operation (used), General Data Measurements width 770 Measurements depth 2045 Measurements height 2030 Machine weight 3150 Main Drive Punching force 115 tons Main motor power 11 kw Ijdpfox D Skgex Ac Ajik Additional Equipment Dual-cylinder hydraulic system Easily interchangeable punching tool One set of punching tools included Angle cutting shear Flat bar shear Notching tool Rod cutting tool 1000 mm electronic back gauge Foot pedal with emergency stop on both sides Delivered with one set of Ø26 mm punch and die This HILALSAN HKM-115 was manufactured in 2022. A robust hydraulic shearing machine, it's ideal for those looking to get high-quality shearing capabilities. Contact us for more information. Application Types Shearing

Year of construction: 2022, condition: ready for operation (used), General Data Measurements width 3700 mm Measurements depth 4100 mm Measurements height 2300 mm Machine weight 12500 kg Main Drive Spindle motor power 30 kW Additional Equipment CNC-controlled CybTouch 8 touchscreen for precise and easy settings Iiedpex D Sybofx Ac Ajk Back gauge with ball screw and linear guide, CNC-controlled adjustable in the range of 5–1000 mm Motorized cutting gap and angle adjustment directly via the control panel 15 clamping units with rubber pads to prevent sheet slipping Built-in LED lighting to illuminate the cutting zone Safety elements include rear light curtain and fold-up plexiglass finger guard High-quality, resharpenable knives (upper knife 2-piece, lower knife 4-piece) Mobile foot pedal with emergency stop switch Built-in ball table for easy sheet movement Electrical components: Siemens and Mitsubishi // Hydraulic components: Hydac, Hoerbiger This Metallkraft HTBS PRO 3113 was manufactured in 2022. It's a hydraulic shearing machine designed for precise cutting of steel and stainless steel plates up to 13 mm thick. Features include a CNC-controlled back gauge, motorized cutting gap and angle adjustment, and built-in LED lighting for enhanced visibility. Ideal for industrial settings requiring high precision. Contact us for more information about this machine. Application Types Shearing

Condition: ready for operation (used), Year of construction: 2022, General Data Measurements width 3740 mm Measurements depth 1475 mm Measurements height 11920 mm Machine weight 3300 kg Control Unit Brand ARBURG Model SELOGICA ND Injection Unit Screw diameter 35 mm Shot weight 132 g (PS) Stroke volume 144 cm3 Injection pressure 2000 bar Isdpfsx D Sr Dex Ac Aeik Screw speed 54 m/min Heating capacity 6.4 Clamping Unit Clamping force 600 kN Opening stroke 400 mm Max open daylight 600 mm Distance between bars 370 x 370 mm Mould height min 200 mm Mould height max - Size of mold platens 510 x 510 mm Ejector stroke 125 mm Ejector force for / back 30 kN Media Main electronic connection 23 kW Pump drive power 15 kW Oil tank 135 l This Arburg 370 S 600-290 U Injection moulding machine was manufactured in the year 2022 in Germany. It is new, never used and still in original packaging. With a clamping force of 600 kN, 290 injection unit and screw diameter of 35mm (armored, highly wear-resistant screw) it is a compact, fully hydraulic clamping system - ideal for reliable and precise reproducibility in injection moulding operations. The closing unit can be tilted from horizontal to vertical. To be considered that machine comes without position control. Application Types Injection Moulding

Year of construction: 2022, condition: ready for operation (used), This Durma MS 2004 NC was manufactured in 2022. It features a hydraulic drive and NC-controlled back gauge, ensuring precise shearing of sheet metals up to 6 mm thick. With a cutting length of 2000 mm and motor power up to 7.5 kW, it's ideal for handling steel, aluminum, and other metals. Consider the opportunity to buy this Durma MS 2004 NC hydraulic shearing machine. Contact us for more information about this machine. Application Types Shearing Iodpfjx D Iy Rox Ac Ajik