Used Hyundai 360 Lc for sale (168)

Condition: good (used), fuel type: diesel, overall weight: 13,800 kg, shovel volume: 0.51 m³, Equipment: cabin, HYUNDAI ROBEX 130 LC Excavator Weight 13.8 t Transport length 7.76 m Transport width 2.6 m Itjdpfowhcgpex Aanjr Transport height 2.74 m Bucket capacity 0.51 m³ Undercarriage LC Chain width 600 mm Boom MB Model series 3 Engine manufacturer Cummins Engine type B3.9C Engine power 75 kW

Condition: used, Year of construction: 1997, operating hours: 8,900 h, Serial number: EM02CK10xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21601 Specifications: Model year unknown Approx. 8,900 hours Power: 97 kW Undercarriage (see pictures) Tracks replaced approx. 100 hours ago (around 2 years ago) Itjdpfx Ajxp Av Rsansr Track width: 60 cm Machine width: approx. 297 cm Bucket AC/climate control See video Delivery by agreement Description:Hyundai Robex 210LC-3H excavator with 5 buckets.Tracks were replaced about 2 years ago and have been used for a maximum of 100 hours since. Something wrong with the gas Delivery by agreement. Hours: 8900 Own weight: 20360 Width: 297 Kw: 97 Model: 210LC- 3H gravemaskin m/ 5 skuffer. Byttet belter for 100 timer siden

Condition: used, Year of construction: 2018, operating hours: 2,578 h, Equipment: all wheel drive, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must always be agreed upon in advance. Hyundai HX 145 LCR - Crawler excavator - Crawler drive - Rubber tracks - Incl. tilting bucket Isdexhbkwspfx Aanetr - Radio - Operating hours: 2,578 - Engine: 129 kW - Camera - Central lubrication system Errors and interim sale excepted. Internal vehicle number: W67 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must always be agreed upon in advance.

Condition: new, Year of construction: 2025, machine/vehicle number: 20250605009, fuel type: diesel, motor manufacturer: Hyundai DP222LC, General information Field of application: Construction Weights Empty weight: 6.185 kg Functional Generator capacity: 825 kVA CE mark: yes Other information Fuel consumption: 119 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A49 Frequency: 50 Itedpfx Aasxivr Eener Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1090 l Transport dimensions (LxWxH): 4,808x1,95x2,5 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Doosan is acquired by Hyundai infracore since 2021 what results in Hyundai brand name on all plates. Engines have remained the same. Hyundai DP222LC / Doosan DP222LC

Condition: used, first registration: 06/2016, Year of construction: 2016, operating hours: 9,837 h, HYUNDAI HL 730-9 A wheel loader with mulching bucket and clamshell bucket, automatic climate control • All-wheel drive • Year of manufacture: 2016 • Operating hours: 9,835 • Approx. 27,000 km Attachments: • Mulching grapple bucket / clamshell bucket • Bucket capacity: 2 m³ • Power (kW / HP): 100 / 136 • Operating weight: 10,500 kg • GVW: 15,500 kg • Last safety inspection: 14/11/2022 Additional equipment: • Automatic climate control Iodpfx Aswmpfpsanjtr • Reversing camera • CD radio • Comfort seat • Automatic / torque converter transmission - German machine, always maintained / all servicing performed by authorized workshop!! - One owner! - Ready for operation! Errors and prior sale excepted!

Condition: used, Year of construction: 2012, operating hours: 5,925 h, Serial number: hhih0604cc000xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20243 Specifications: - 2012 model - 5925 Hours - 24060 kg - 107 kW - Machine width: 310 cm - Track width: 70 cm - Track controls - Rear hatch does not lock - Chassis should be replaced - Loose track plates - Gps - Excavator bucket - Hydraulic cleaning bucket can be included for an additional charge - Lights - Radio - Air conditioning/ac - Ready to deliver Description: We have a 2012 Hyundai Robex 235LCR-9 w/ Excavator bucket and gps for sale. The chassis should be replaced and the side hatch does not lock. Itsdpfx Aajxdux Tsnjr Other than that, the machine works as it should according to the owner. But some additional costs must be considered. A hydraulic cleaning bucket can also be included for an additional charge. Ready to deliver Hours: 5925 Own weight: 24060 Total Weight: 24060 Width: 310 Kw: 107 Model: Robex 235LCR-9 m/ Graveskuffe og gps

Condition: new, Year of construction: 2023, Equipment: all wheel drive, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be agreed upon in advance. Hyundai HX 235A LCR Itedpfx Aaexhbitonsr - New vehicle - Crawler excavator - Crawler drive - Without attachments - Radio - Operating hours: 18 - Engine: 129 kW - Camera - Central lubrication system Errors and prior sale excepted. Internal vehicle number: W61 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be agreed upon in advance.

Condition: new, Year of construction: 2025, machine/vehicle number: 20250405005, fuel type: diesel, motor manufacturer: Hyundai DP158LC, General information Field of application: Construction Itjdpfx Aaew Alurensr Weights Empty weight: 4.600 kg Functional Generator capacity: 510 kVA CE mark: yes Other information Fuel consumption: 72.9 Liter / Hour at 75% Load Generator: Leroy Somer TALA473B Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 775 l Transport dimensions (LxWxH): 4,008x1,8x2,35 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Doosan is acquired by Hyundai infracore since 2021 what results in Hyundai brand name on all plates. Engines have remained the same. Hyundai DP158LC / Doosan DP158LC

Condition: used, Year of construction: 2000, operating hours: 5,100 h, Serial number: N4061xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21562 Specifications: Approx. 2000 model (according to owner) Hours: Approx. 5100 (may increase) Weight: 14,210 kg Undercarriage (see photos) Track width: 60 cm Total width: Approx. 265 cm SMP quick coupler Engcon Rototilt SMP digging bucket Ditch cleaning bucket Narrow bucket Grading bucket Ripper tooth Kaldnes hydraulic breaker Video included Ready for delivery Description:Hyundai tracked excavator with extensive equipment.The machine has approx. 5100 hours.Sold with Rototilt, 4 buckets, ripper tooth, and hydraulic breaker.Ready for delivery. Hours: 5100 Own weight: 14210 Iedpfx Aaoxpdlaonjtr Width: 265 Model: 140LC-7 Beltegraver

Condition: ready for operation (used), Year of construction: 2001, General Data Measurements width 2349 mm Itedpfx Asx D Nfbsanjr Measurements depth 1640 mm Measurements height 2600 mm Machine weight 2300 kg Movement X-Axis Movement 500 Y-Axis Movement 300 Z-Axis Movement 300 This 3-axis Hyundai SPT-V30TD was manufactured in 2001. It features a spindle speed of 8,000 rpm, table dimensions of 600 x 380 mm, and a maximum table load of 200 kg. Ideal for milling applications, it offers X, Y, and Z travels of 500 mm, 300 mm, and 300 mm respectively. Consider the opportunity to buy this Hyundai SPT-V30TD vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2022, operating hours: 1,934 h, 2022 | Hyundai HL975A CVT | Used Wheel Loader | 1934 hours 📍Location: Germany, Böblingen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 189500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Iodpfx Aaox Htkpsnetr 👷‍♂️ Inspected by an independent expert 56 inspection points 49 approved ✅ 7 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Well-functioning machine and good-looking machine, a bit of play on the quick coupler and articulation pin, tires need to be replaced as they are on the bad side, here and there some spots of damage. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39199 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2019, turning length: 700 mm, spindle bore: 76 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 720 mm, Twin spindle construction Twin turret configuration with Y Axis (Y-Axis Cutting complex shaped work piece) Isdox I Nikepfx Aanotr Build in Spindle motor High Rigidity BMT Turret Full C-Axis 360.000 Slant bed construction 45 Gr Please note Pictures is example not orginal picture ! Max. turning Ø: 290mm X-Axis: 165/195mm Y-Axis: 100mm Z-Axis: 700/720mm B Axis: 668° Spindle bore: 76mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds: 5000Rpm Subspindle bore: 76mm Subspindle power: 22kW ATC / revolver: 12 Speed live tools: 5000Rpm Positions lower revolver:12 Speed live tools: 5000Rpm Power live tools: 6kW Chip conveyor: Yes Tool eye: Yes Length: 3800mm Width: 2000mm Height: 2100mm Weight: 8500kg

Condition: good (used), functionality: fully functional, machine/vehicle number: 14736259, spindle speed (max.): 6,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 200 mm, total height: 2,100 mm, total length: 1,800 mm, total width: 1,500 mm, overall weight: 2,000 kg, HYUNDAI HIT-8 S CNC lathe - Operating voltage: 380 V - Frequency: 50/60 Hz - Rated current: 24 A - Connection: 25.5 kVA Note: The item must be collected between 04 and 12 March 2026 on a specific date to be agreed upon in advance. FCA D-75181 Pforzheim – loaded onto truck Itsdpfx Aajx Hwhfsnjr

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: G3169-0110, turning length: 530 mm, turning diameter: 420 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 220 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, overall weight: 4,700 kg, turning diameter over bed slide: 800 mm, HYUNDAI WIA L200SY CNC TURNING CENTER Year: 2012 | Fanuc 18i-TB CNC Control SN: G3169-0110 • 5-Axis CNC Turning Center – Hyundai WIA L200SY Iedox I A Hcspfx Aanotr • Main Chuck: 8″ | Sub Spindle: 5″ • Live Tooling & Y-Axis + C-Axis indexing • Max Turning Diameter: approx. 419–420 mm / 16.5″ • Max Turning Length: approx. 520–530 mm / ~20.5–20.9″ • Swing Over Bed: approx. 800 mm / 31.5″ • X Travel: approx. 220 mm / 8.7″ • Z Travel: approx. 550 mm / 21.7″ • Y Travel: approx. 80 mm / 3.1″ • Max Spindle Speed: up to 4,000 rpm • Main Spindle Power: ~20 HP (~15 kW) • Sub Spindle Speed up to 6,000 rpm • C-Axis indexing: 0.001° possible • Tool Stations: approx. 12 • Coolant system and chip conveyor included • Approx. Dimensions: 120″ × 68″ × 80″ • Approx. Weight: ~10,500 lbs (~4,760 kg) NOTE: MACHINE WAS REMOVED FROM GOOD WORKING CONDITION 2 YEARS AGO. PLANNED TO PUT BACK IN SERVICE BUT SELLER WILL NO LONGER BE DOING MACHINING.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 510 mm, table size 630 x 500mm Ijdpfeu Tw R Aex Aanstr max load capacity: 500kg

Condition: ready for operation (used), Year of construction: 2018, Main Drive Spindle speed range 15000 Iedpfx Aasx D I Injnjtr Number of axis 3 This 3-axis Hyundai WIA KF 5600 vertical machining center was manufactured in 2018. It features a 30-position automatic tool changer, a high-speed spindle at 15,000 rpm with BBT40 taper, and advanced Siemens software options including 3D simulation and real-time machining recording. Ideal for precision machining with its equipped glass rods for accurate measurements. Consider the opportunity to buy this Hyundai WIA KF 5600 vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2017, operating hours: 8,562 h, 2017 | Hyundai HX300 NL with a bucket | Used Tracked Excavator | 8562 hours Itsdsx I Nrljpfx Aansr 📍Location: France, SAINT-VULBAS 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 49800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 68 inspection points 48 approved ✅ 16 imperfect ℹ️ 4 issues ⚠️ 📌 Inspector's Comment: Well-used excavator, undercarriage needs to be tightened. Hydraulic oil pump makes a grinding noise, hydraulic oil level low, swing brake no longer functioning properly, much play on boom pin, small coolant leakage at vent valve, overpressure system does not build up sufficient pressure, otherwise an operational machine. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39020 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 2015, operating hours: 7,971 h, load capacity: 5,000 kg, lifting height: 4,400 mm, fuel type: diesel, mast type: triplex, power: 69 kW (93.81 HP), Vehicle Description Diesel Forklift HYUNDAI 50DA-9A Year: 2015 According to meter: 7,971 operating hours 5-ton lifting capacity 4.4 meter lift height 2.32 meter overall height 69 kW Kubota engine - Triplex full free lift mast - Side shifter - Fork positioner - Wide fork carriage - Twin tires Iodpfx Aaox Aixlonetr - Semi-cab - Lighting system - Original paint - Very good tires - Immediately ready for operation Sales price: 16,900,-- net Affordable delivery available!

Condition: ready for operation (used), Year of construction: 2009, operating hours: 21,927 h, Control Unit Brand FANUC Model Series 21i-MB General Data Measurements width 2770 mm Measurements depth 4950 mm Measurements height 2804 mm Machine weight 15000 Main Drive Spindle speed range 8000-12000 Spindle motor power 22 kW Number of axis 4 Isdpfx Aaex D Sl Denstr Movement X-Axis Movement 850 mm Y-Axis Movement 700 mm Z-Axis Movement 750 mm Workpiece Workpiece weight 500 kg Table Outer length 500 mm Outer width 500 mm Tools Max weight 8 kg Max tool diameter 40 mm Max tool length 400 mm This HYUNDAI KIA HS500i Horizontal Machining center was manufactured in 2008. The 4 axis machine has a total of 21927 working hours. It operates through a FANUC Series 21i-MB control unit. The machine reaches a 12000 rpm spindle speed. It is in good technical condition, has full documentation and is ready for testing. Application Types Milling

Condition: ready for operation (used), Year of construction: 2011, operating hours: 2,619 h, General Data Machine weight 10000 kg Control Unit Brand FANUC Model 21i MB Main Drive Spindle speed range 80 - 12000 Isdpfjx D R Htox Aanetr Spindle motor power 11/7.5 kW Tool taper NT 40 Number of axis 3 Movement X-Axis Movement 800 mm X-Axis Rapid Traverse 42 m/min Y-Axis Movement 600 mm Y-Axis Rapid Traverse 42 m/min Z-Axis Movement 600 mm Z-Axis Rapid Traverse 42 m/min Table Outer length 2 x 900 mm Outer width 2 x 650 mm Min distance between vertical spindle and table 200 mm Max distance between vertical spindle and table 800 mm Table load 2 x 400 kg Tools Max weight 8 kg Max tool diameter 90 mm Max tool length 300 mm This 3-axis Hyundai Kia Hi-V600D vertical machining center was manufactured in 2011. Ideal for precision machining tasks, it offers robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the Hyundai Kia Hi-V600D machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2014, Main Drive Spindle speed range 24000 Spindle motor power 33/25 kW Tool taper HSK-A63 Number of axis 5 Iedpfsx D Ezxsx Aanotr Movement X-Axis Movement 1000 mm Z-Axis Rapid Traverse 50 m/min X-Axis Rapid Traverse 50 m/min Y-Axis Movement 560 mm Y-Axis Rapid Traverse 50 m/min Z-Axis Movement 450 mm Table Table load 800 kg Tools Number of index 24 This 5-axis Hyundai Wia Hi-MOLD 560/5A vertical machining centre was manufactured in 2014. It features a table size of 1,250×600 mm, a maximum load capacity of 800 kg, and a high-speed spindle with 24,000 RPM and 33 kW power. The machine offers rapid feed rates of 50 m/min in all axes and a quick tool change time of 5.5 seconds. If you are looking to get high-quality milling capabilities, consider the Hyundai Wia Hi-MOLD 560/5A machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2014, General Data Machine weight 23500 Itodpfxex D N R Re Aaner Main Drive Spindle speed range 8000 Spindle motor power 22 kw Number of axis 3 Movement X-Axis Movement 2450 mm Y-Axis Movement 950 mm Z-Axis Movement 850 mm Table Outer length 2700 mm Outer width 950 mm Table load 4500 Tools Slots in storage 30 This 3-axis Hyundai Wia F 960M vertical machining center was manufactured in 2014. It features a large table size of 2700 x 950mm, capable of handling loads up to 4500kg. Equipped with a 22 kW spindle power and a maximum speed of 8000 RPM, it includes a 30-position tool magazine. If you are looking to get high-quality milling capabilities, consider the Hyundai Wia F 960M machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2014, General Data Machine weight 18000 kg Main Drive Spindle speed range 20000 Number of axis 5 Movement X-Axis Movement 650 mm X-Axis Rapid Traverse 50 m/min Y-Axis Movement 765 mm Y-Axis Rapid Traverse 50 m/min Z-Axis Movement 510 mm Z-Axis Rapid Traverse 50 m/min Table Table load 500 kg Tools Slots in storage 30 This 5-axis Hyundai Wia HI-MOLD 750-5A vertical machining centre was manufactured in 2014. It features a spindle speed of 20,000 RPM, a tool magazine with 30 slots, and a rapid traverse rate of 50 m/min in all axes. The table can handle up to 500 kg, tilting from +30˚ to -120˚. Consider the opportunity to buy this Hyundai Wia HI-MOLD 750-5A vertical machining centre. Contact us for more information about this machine. Itedjx D Ez Ejpfx Aansr Application Types Milling

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,917 h, Control Unit Itsdpfxox D Nb Nj Aansr Brand SIEMENS Model SINUMERIK 828D Main Drive Spindle speed range 8000 Number of axis 3 Movement X-Axis Movement 1060 mm Y-Axis Movement 510 mm Z-Axis Movement 635 mm Table Table load 800 kg Tools Type of tool holder BT40 This 3-axis Hyundai WIA F500 + was manufactured in 2019. It features a Siemens SINUMERIK 828D control unit, a spindle speed of up to 8,000 rpm, and a spindle motor power of 15/11 kW. The machine includes a CNC vertical machining center, chip conveyor, automatic tool changer, and internal cooling system. If you are looking to get high-quality milling capabilities, consider the Hyundai WIA F500 + machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2023, condition: ready for operation (used), Additional Equipment Automatic measuring arm Chip conveyor (hinge belt type) Coolant high pressure, approx. 20 bar KLM pistol (for coolant or air cleaning) HW - Fanuc Polygon Turning (Polygonal machining) Flushing ejector on the sub-spindle Pneumatic ejector on the sub-spindle 3-color signal lamp KLM filter for internal coolant pump Iemca Master 865 (bar feeder) This 4-axis Hyundai HD2200SY horizontal turning machine was manufactured in 2023. It features a turret with 24 positions, a high-pressure coolant system at approximately 20 bar, and an Iemca Master 865 bar feeder. Additional highlights include a chip conveyor, part catcher on the sub-spindle, and a pneumatic ejector. Ideal for complex machining tasks, the Hyundai HD2200SY machine we have for sale is a robust addition to any production line. Contact us for more information. Isdpfxox D Sdmo Aanstr Application Types Turning