Used Hyundai Crawler Excavator for sale (151)

Condition: excellent (used), Year of construction: 2015, Year of production: 2015 Range: 2239 mm Control: Panasonic WG III Lifting capacity: 80 kg Ncodpfotu Tp Ssx Aqvst

Condition: excellent (used), functionality: fully functional, power: 203 kW (276.00 HP), overall weight: 20,100 kg, axle configuration: 4x4, number of seats: 1, Year of construction: 2019, operating hours: 14,695 h, Equipment: air conditioning, all wheel drive, cabin, centralized greasing system, differential lock, hydraulics, quick-change device, trailer coupling, Hyundai HL965/HySW/40 km/h/Air Conditioning/CSA • Manufacturer: Hyundai • Model: HL965 • Year of manufacture: 2019 • Operating hours: 14,695 h • Engine model: Cummins QSL9 • Power: 203 kW / 276 hp • All-wheel drive • Differential lock • ROPS/FOPS certified • Rear-view camera • 360° camera • Air-suspended driver's seat • Multifunction display • ESC (Electronic Stability Control) • Air conditioning • Window ventilation • Central lubrication system • High- and low-speed range • Max. travel speed: 40 km/h • Radio • Total weight: 20,100 kg • German machine • Immediately operational • This offer is non-binding and subject to change. - Subject to prior sale. - Errors and/or typographical mistakes excepted. - Sale is according to our General Terms and Conditions. Njdpfxsyq Rt Is Aqvjct

Condition: good (used), Year of construction: 2017, HYUNDAI WIA L280 CNC Lathe Year of manufacture 2017 Control system SIEMENS 828D Turning diameter over bed 590 mm Maximum turning diameter 410 mm Turning length 720 mm Spindle nose A2-8, speed 3,000 rpm Spindle power 22/18.5 (30 min) kW Torque 729.5/613.5 (30 min) Nm Nedoy Uhxqepfx Aqvjct X-axis travel - 220 mm Z-axis travel - 750 mm Equipment: SIEMENS 3D simulation SIEMENS ShopTurn dialog programming C-axis Chip conveyor with lateral discharge 10 tool positions (BMT55) 3-jaw chuck Ø 310 mm Foot switch for chuck Manual tool probe Manual steady rest with hydraulic quill Coolant tank 180 L Standard coolant nozzle USB and Ethernet interface Single-color signal light Included in the scope of supply: Complete set of VDI tool holders Assortment of turning tools Center punch Tool cabinet with contents Operating manual/documentation Machine parameters on USB stick Technical data & manufacturer’s brochure – see PDF. All technical data, illustrations, and content are non-binding and without guarantee. Subject to change and errors. All other accessories shown in the photos and video are not included in the scope of supply and are therefore not part of this sale. The scope of supply includes only the accessories that are explicitly listed here, in the order confirmation, and in the invoice. FCA (Free on Carrier, Truck) D-32457 Porta Westfalica Packaging only Delivery time: immediate Subject to prior sale / Payment due immediately upon completion of purchase

Condition: excellent (used), Year of construction: 2019, turning length: 700 mm, spindle bore: 76 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 720 mm, Twin spindle construction Twin turret configuration with Y Axis (Y-Axis Cutting complex shaped work piece) Build in Spindle motor High Rigidity BMT Turret Full C-Axis 360.000 Slant bed construction 45 Gr Please note Pictures is example not orginal picture ! Max. turning Ø: 290mm X-Axis: 165/195mm Y-Axis: 100mm Z-Axis: 700/720mm B Axis: 668° Spindle bore: 76mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds: 5000Rpm Subspindle bore: 76mm Subspindle power: 22kW ATC / revolver: 12 Speed live tools: 5000Rpm Positions lower revolver:12 Speed live tools: 5000Rpm Power live tools: 6kW Chip conveyor: Yes Tool eye: Yes Length: 3800mm Nodpfjx I Nikox Aqvsct Width: 2000mm Height: 2100mm Weight: 8500kg

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, table width: 500 mm, table length: 1,200 mm, Spindle speed 10.000 Rpm Coolant tank with IKZ 20 bar Chip conveyor X - Travel: 1060mm Y - Travel: 510mm Z - Travel: 635mm Table Length: 1200mm Table Width: 500mm Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 10000Rpm ATC / revolver: 24 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Ncedexdxhropfx Aqvot Coolantsystem: Yes Length: 2915mm Width: 2361mm Height: 2800mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2018, functionality: fully functional, Siemens 828 chop-mill Palett 650x400 mm Njdpsy S Ubtefx Aqvoct X/Y/Z 560/360/480 mm 24.000 v/min, BT 30 Big plus ATC 20 pos.

Condition: used, Year of construction: 2020, operating hours: 14,140 h, Equipment: ABS, all wheel drive, * Hyundai HL 965 wheel loader * Year: 2020 * Operating hours: 14,140 h * Bucket: 3.3 m³ * Hydraulic quick coupler * Air conditioning * Central lubrication system * Power: 201 kW Nsdpfx Aqjyt Aptjvsct * Weight: 22,100 kg * More pictures and videos available via Whatsapp * Information provided without guarantee and subject to prior sale

Condition: used, power: 109 kW (148.20 HP), fuel type: diesel, first registration: 06/2012, Year of construction: 2012, Equipment: onboard computer, = Additional Options and Accessories = Nsdpfxey Tw Npe Aqvoct - Central lubrication system = Further Information = Number of cylinders: 6 Engine displacement: 6,700 cc Unladen weight: 12,000 kg Dimensions (L x W x H): 723 x 255 x 326 cm Chassis type: Articulated Loading shovel capacity: 2 m³ Registration number: TJD-40-J Please contact Vitali Lenda for further information.

Condition: good (used), Year of construction: 2023, CNC Multi-Axis Turning Center Make: Hyundai WIA Model: LM1800TTSY Control: Siemens 840D ShopTurn with 3D Simulation Year of Manufacture: 2023 Technical Specifications: Slant-bed design with box ways in X/Y axes, Z axes with linear guides Sub-spindle and twin turret system Travels: X/X1: 165 / 195 mm Z1/Z2: 700 / 720 mm ZB: 668 mm Y: 100 mm Rapid traverses: X/Y/Z: 20 / 7.5 / 40 m/min Max turning diameter: 230 mm Max turning length: 673 mm Spindle nose: A2-6 Spindle bore / bar capacity: 76 / 65 mm Spindle speed: 5,000 rpm (both spindles) Drive power: 2x 22 / 11 kW Turret & Milling Unit: 2 turrets each with 12 stations (optionally 24) System: BMT55P Milling drive: Speed: 5,000 rpm Power: 5.5 / 1.1 kW Equipment: Automatic measuring arm Coolant tank 270 liters Direct path measuring system (X1/X2, Z1/Z2, Y) Coolant temperature compensation (with air conditioning) High-pressure coolant system 20 bar Chip conveyor (belt type) Siemens network expansion Bar feeder interface Extensions & accessories Software & Electrical: ShopTurn with 3D simulation Nedpey Hfrlefx Aqvoct Machine transformer Measuring & Automation Technology: Automatic Renishaw Q-setter Linear positioning sensor (for main and sub-spindle) Workpiece Handling: Part catcher for main spindle Part catcher for sub-spindle with belt discharge Workpiece ejector Clamping Technology: Hainbuch Spanntop mini Main spindle (AX Pull size 65) Sub-spindle (AX Fix size 65) Peripherals: Sprint 565 S2 bar feeder by LNS For bar lengths up to 3,000 mm Diameter: 5 – 65 mm Reduction bushing set (various diameters) Extracting unit ARNO-2VF Purchase price in 2023: €330,000 The machine has seen little use and is in very good condition.

Condition: excellent (used), Year of construction: 2021, Offer, subject to prior sale: CNC Multi-Axis Turning Center Manufacturer: Hyundai WIA Model: LM1800TTSY Control: Siemens 840D Year of manufacture: 2021 Technical Specifications: Slant-bed construction with box ways for X/Y axes, linear guideways for Z axes Sub-spindle and twin turret system Travel: X/X1: 165 / 195 mm Z1/Z2: 700 / 720 mm ZB: 668 mm Y: 100 mm Rapid traverse rates (X/Y/Z): 20 / 7.5 / 40 m/min Max. turning diameter: 230 mm Max. turning length: 673 mm Spindle nose: A2-6 Spindle bore / bar capacity: 76 / 65 mm Spindle speed: 5,000 rpm (both spindles) Drive power: 2 x 22 / 11 kW Turret & Milling Unit: 2 turrets with 12 stations each (optionally 24) System: BMT55P Milling drive: Speed: 5,000 rpm Output: 5.5 / 1.1 kW Equipment: Automatic tool setter arm Coolant tank 270 liters Direct path measuring system (X1/X2, Z1/Z2, Y) Coolant temperature compensation (with cooling unit) High-pressure coolant 20 bar Chip conveyor (belt-type) Siemens network extension Bar feeder interface Extensions & Accessories Software & Electrical: ShopTurn with 3D simulation (2 licenses) Machine transformer (3 units) Measuring & Automation Technology: Nedpfoywk Iasx Aqvsct Automatic Renishaw Q-setter Linear positioning sensor (for main and sub-spindle) Workpiece Handling: Part catcher main spindle Part catcher sub-spindle with belt discharge Workpiece ejector Peripherals: Bar loading magazine Sprint 565 S2 by LNS For bar lengths up to 3,000 mm Diameter: 5 – 65 mm Set of reduction tubes (various diameters) Extraction unit ARNO-2VF

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 1 h, load capacity: 8,000 kg, lifting height: 5,070 mm, free lift: 1,615 mm, fuel type: diesel, mast type: triplex, construction height: 2,950 mm, power: 81 kW (110.13 HP), fork carriage width: 2,200 mm, fork length: 1,200 mm, empty load weight: 12,169 kg, total length: 3,970 mm, drive type: Diesel, construction width: 2,200 mm, Diesel Forklift Load center: 600 mm Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Transmission: Torque converter Condition: New machine Ncjdpfx Aey Hm Dceqvot Technical condition: New Front tire type: Superelastic Rear tire type: Superelastic Description: - 2.9-liter HMC D4CC diesel engine, 81 kW, EU Stage V - Common Rail incl. DOC, SCR, and DPF - Kessler front axle - ZF transmission - Engine power selector - Reduced noise level in the cabin - Multifunctional digital display - Air conditioning with multiple air vents - Improved visibility thanks to one-piece curved windshield - Automatic parking brake: OPSS system - Speed limiter - Slope indicator - Easy maintenance access - Tiltable cabin with heating and A/C - Engine self-diagnosis and consumables management - Automatic particulate filter and SCR regeneration - Grammer seat with belt, contact switch, and armrest 3rd valve, 4th valve, rear work lights, front work lights, heater, load guard, particulate filter, full cabin, air conditioning, full free lift, CE certificate, twin tires, interior mirror, exterior mirrors, windshield wiper, single pedal, LED, seat,

Condition: ready for operation (used), Year of construction: 2018, Robot arm manufactured in 2018. This Hyundai Hi 5a-S features 16 simultaneous controlled axes, offering advanced programming and playback capabilities. It includes a full digital servo system and a user-friendly teach pendant with a 7" color TFT-LCD touch panel. The machine comes with a special gripper and a robust support podium. If you are looking to get high-quality automation capabilities, consider the Hyundai Hi 5a-S robot arm we have for sale. Contact us for further details. • Control model: Hi5a-S Nsdpfxey Hiame Aqvjct • Number of controlled axes: 16 simultaneous • Operations: Programming and Playback • Interpolations: PTP, Linear, Circular • Position control: Serial Absolute Encoder • Memory/backup: USB or Ethernet • Servo system: Full digital servo • Interface: Native DeviceNet, 2x Ethernet, 2x RS232/RS422, 1x USB, 1x CAN (optional), 1x DeviceNet Master, 1x SD card • Dimensions: 700 × 900 × 630 mm • Teach pendant: TP520 (7" color TFT-LCD touch panel, Windows CE) • Compliance: CE Declaration of Conformity and manuals included Additional equipment • Robot support podium (machined base ready for floor fixing) • Special gripper with spring-suspended suction cups and autonomous vacuum generator • Removable “claws” for tray handling • Industry 4.0 cyber-physical system (remote monitoring / tele-assistance) • Pro-face 7" color touch panel for production monitoring

Condition: new, Year of construction: 2022, functionality: fully functional, HYUNDAI-WIA HD3100M FANUC 0IT PLUS CNC HIGH POWER TURNING CENTRE WITH HARDENED & GROUND BOX GUIDEWAYS, HIGH SPEED SERVO TURRET, C-AXIS & DRIVEN TOOLS & 12" STD CHUCK Swing Over the Bed Ø 750 MM Swing Over the Carriage Ø 500 MM Maximum Turning Diameter Ø 420 MM Maximum Turning Length 740 MM Bar Capacity - Main Ø 102 MM MAIN SPINDLE Chuck Size Ø 12” – 305 MM Spindle Bore Ø 115 MM Spindle Speed (Rpm) 2,800 RPM Motor (Max. / Cont.) 26.0 / 18.5 KW Torque (Max. / Cont.) 1,123 / 657 NM Spindle Type BELT [GEARLESS] Spindle Nose A2-11 C-Axis Indexing 360° (0.001°) Travel X 265 MM Travel Z 830 MM Rapid Speed X 24 M / MIN Rapid Speed Z 30 M / MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools 12 Tool Size - OD 25 MM² Tool Size - ID Ø 40 MM Indexing Time 0.15 SEC / STEP LIVE TOOLS Motor (Max / Cont.) 5.5 / 3.7 KW Milling Tool Speed 5,000 RPM Torque (Max. / Cont.) 70.0 / 35.4 NM Collet Size ER32 - Ø 25 Type BMT65P QUILL TYPE TAILSTOCK [PROGRAMMABLE BUILT IN TAILSTOCK] Taper MT5 [MT4] Quill Diameter Ø 100 MM Quill Travel 120 MM Tailstock Travel 830 MM TANK CAPACITY Coolant Tank200 L Lubricating Tank 1.8 L POWER SUPPLY Electrical Power Supply 27 [30 GEARLESS] KVA Voltage 415V / 50HZ / 3PH MACHINE Floor Space (L x W) 3,885 x 1,800 MM Height 1,850 MM Weight 6,050 KGS STANDARD FEATURES SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 12 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" TOUCH SCREEN MONITOR FOR FANUC (SMART GUIDE i) HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) PART PROGRAM STORAGE - 2MB (1,000 REGISTERABLE PROGRAMS) SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) COOLANT TANK (SIDE TYPE) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (30 LITRES) CALL LIGHT (1 COLOUR) TOOLBOX MAIN SPINDLE - 2,800 RPM, 26.0 / 18.5 KW, 1123 NM BELT DRIVEN TOOLING PACKAGE QUILL TYPE TAILSTOCK WITH STD LIVE CENTER 12 STATION BMT65P SERVO TURRET, LIVE TOOLS 5,000 RPM, 5.5 KW, 47.0 NM FACTORY FITTED MACHINE OPTIONS CHIP BUCKET STANDARD CHIP CONVEYOR SIDE HINGED HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD (RATED AT 60HZ SUPPLY) BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE 30 KVA TRANSFORMER AND CABLE QUICK TOOL SETTER - MANUAL PROGRAMMABLE TAILSTOCK IN LIEU OF STDMACHINE CONSTRUCTION & FEATURES 12” STANDARD CHUCK SIZE. 30° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. HARDENED & GROUND BOX GUIDEWAYS FOR HEAVY DUTY CUTTING. 12 STATION HIGH SPEED RIGID SERVO DRIVEN TOOL TURRET – BMT65P. Nodpfx Aqsx Thzvjvsct 2,800 RPM 26.0 / 18.5 [35.0 / 25.0 GEARLESS] KW HIGH POWER MAIN SPINDLE. 24 X 30 M/MIN RAPID TRAVERSE RATES – X & Z AXES. C-AXIS MAIN SPINDLE. ERGONOMIC DESIGN FOR EASY ACCESS TO CHUCK & TURRET.

Condition: new, Year of construction: 2022, functionality: fully functional, HYUNDAI-WIA HD2200Y FANUC 0IT PLUS CNC LATHE WITH Y AXIS. MACHINE CONSTRUCTION & FEATURES ▪ ONE PIECE HEAVY DUTY CAST IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ 4,000 RPM MAIN SPINDLE. ▪ 6,000 RPM LIVE TOOLING SPEED. ▪ HEAVY DUTY CUTTING WITH EXCELLENT PERFORMANCE. ▪ WEDGE TYPE Y-AXIS. ▪ 12 STATION HIGH SPEED RIGID SERVO TURRET - BMT55P ▪ HARDENED & GROUND BOX GUIDEWAYS Swing Over the Bed Ø 820 MM Swing Over the Carriage Ø 650 MM Maximum Turning Diameter Ø 300 MM Maximum Turning Length 610 MM Bar Capacity – Main Spindle Ø 65 MM MAIN SPINDLE Chuck Size Ø 8” - 203 MM Spindle Bore Ø 76 MM Spindle Speed (Rpm) 4,000 RPM Motor (Max / Cont.) 18.5 / 15.0 [22.5 / 15.0] KW Torque (Max / Cont.) 206.2 / 125.4 [215.0 / 143.3] NM Spindle Type BELT Spindle Nose A2-6 Travel X 215 MM Travel Y 110 (± 55) MM Travel Z 680 MM Rapid Speed X 24 M / MIN Rapid Speed Y 10 M / MIN Rapid Speed Z 30 M / MIN HARDENED & GROUND BOX GUIDEWAYS Number of Tools 12 [24] Tool Size - OD 25 MM² Tool Size - ID Ø 20 MM Indexing Time 0.2 SEC / STEP Y-Axis Type WEDGE TYPE LIVE TOOL Motor (Max / Cont.) 5.5 / 3.7] KW Milling Tool Speed 6,000 RPM Torque (Max / Cont.) 52.5 / 26.5 NM Collet Size Ø 16 – ER25 Type BMT-55P TAILSTOCK Taper MT 4 Quill Diameter Ø 80 MM Ncsdpfx Aex Th Nyeqvst Quill Travel 120 MM Travel 680 MM TANK CAPACITY Coolant Tank 200 L Lubricating Tank 2.0 L Electric Power Supply 27 KVA Thickness of Power Cable OVER 25 MM² Voltage 415 V / 50 HZ / 3PH Floor Space (L x W) 3,380 x 1,800 MM Height 1,950 MM Weight 4,700 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CHIP - BUCKET STANDARD CHIP - CONVEYOR SIDE HINGED HIGH PRESSURE COOLANT SYSTEM 6.0 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE 30 KVA TRANSFORMER AND CABLE QUICK TOOL SETTER - AUTO PROGRAMMABLE TAILSTOCK IN LIEU OF STD TURRET UPGRADE - 12 STATION 24 POSITION BMT55P, LIVE TOOLS 6K RPM, 5.5 KW STANDARD FACTORY FITTED MACHINE OPTIONS SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) COOLANT TANK (SIDE TYPE) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD HYDRAULIC UNIT 35 BAR (30 LITRES) CALL LIGHT (1 COLOUR) FRONT DOOR INTERLOCK TOOLBOX STANDARD TOOLING PACKAGE QUILL TYPE TAILSTOCK WITH STD LIVE CENTER

Condition: new, Year of construction: 2023, functionality: fully functional, HYUNDAI-WIA HD3100YA FANUC 0IT PLUS CNC LATHE WITH Y AXIS MACHINE CONSTRUCTION & FEATURES ▪ ONE PIECE HEAVY DUTY CAST IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ 3,500 RPM MAIN SPINDLE. ▪ 5,000 RPM LIVE TOOLING SPEED. ▪ HEAVY DUTY CUTTING WITH EXCELLENT PERFORMANCE. ▪ WEDGE TYPE Y-AXIS. ▪ 12 STATION HIGH SPEED RIGID SERVO TURRET – BMT55P ▪ HARDENED & GROUND BOX GUIDE WAYS MACHINE CAPACITIES Swing Over the Bed Ø 800 MM Swing Over the Carriage Ø 670 MM Maximum Turning Diameter Ø 420 MM Maximum Turning Length 760 MM Bar Capacity – Main Spindle Ø 81 MM MAIN SPINDLE Chuck Size Ø 10” - 254 MM Spindle Bore Ø 91 MM Spindle Speed (Rpm) 3,500 RPM Motor (Max / Cont.) 26.0 / 18.5 KW Torque (Max / Cont.) 734 / 522 NM Spindle Type BELT Spindle NoseA2-8 FEED Travel X265 MM Travel Y120 (± 60) MM Travel Z830 MM Rapid Speed X24 M / MIN Rapid Speed Y10 M / MIN Rapid Speed Z30 M / MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools12 Tool Size - OD25 MM² Tool Size - IDØ 20 MM Indexing Time0.2 SEC / STEP Y-Axis Type WEDGE TYPE LIVE TOOL Motor (Max / Cont.) 5.5 / 3.7 KW Milling Tool Speed 5,000 RPM Torque (Max / Cont.) 70/0 / 35.4 NM Collet Size Ø 16 – ER25 Type BMT-65P TAIL STOCK Taper MT 5 Quill Diameter Ø 100 MM Quill Travelb120 MM Travel b830 MM Voltage 415 V / 50 HZ / 3PH Floor Space (L x W) 3,630 X 1,910 MM Height 1,960 MM Weight 6,200 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CONVEYOR & CHIP BOX HELICAL INTERPOLATION FUNCTION HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO MAIN SPINDLE - 3,500 RPM, 26.0 / 18.5 KW, 734 NM BELT DRIVEN PROGRAMMABLE TAILSTOCK IN LIEU OF STD QUILL FORWARD / REVERSE CONFIRMATION DEVICE QUILL TYPE TAILSTOCK - MANUAL TYPE MT#5 100 MM DIA QUILL, 120 MM QUILL TRAV STANDARD FEATURES SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 10 INCH 3 JAW HYDRAULIC CHUCK CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE HYDRAULIC CHUCK PRESSURE INTERLOCK - MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) PART PROGRAM STORAGE - 2MB Ncodpfx Aox Thu Noqvst SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 180 LITRES FULL SPLASH GUARDING SYSTEM CALL LIGHT TOOLBOX TOOLING PACKAGE QUILL TYPE TAILSTOCK 12 STATION BMT65P SERVO TURRET, LIVE TOOLS 5,000 RPM, 5.5 KW, 47.0 NM

Condition: new, Year of construction: 2023, functionality: fully functional, HYUNDAI-WIA HD2200 FANUC 0IT PLUS CNC LATHE MACHINE CONSTRUCTION & FEATURES ▪ 8” STANDARD CHUCK SIZE. ▪ 45° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ HARDENED & GROUND BOX GUIDEWAYS FOR HEAVY DUTY CUTTING. ▪ 12 STATION HIGH SPEED RIGID SERVO TURRET. ▪ 4,500 RPM HIGH POWER MAIN SPINDLE. ▪ 24 X 30 M/MIN RAPID TRAVERSE RATES – X & Z AXES. ▪ ERGONOMIC DESIGN FOR EASY ACCESS TO CHUCK & TURRET. Swing Over the Bed Ø 550 MM Swing Over the Carriage Ø 390 MM Maximum Turning Diameter Ø 380 MM Maximum Turning Length 565 MM Bar Capacity Ø 65 MM MAIN SPINDLE Chuck Size Ø 8” – 203 MM 10” - [254] MM Spindle Bore Ø 76 MM Spindle Speed (rpm) 4,500 RPM Motor (Max/Cont.) 18.5 / 15.0 KW Torque (Max/Cont.) 206 / 125.3 NM Spindle Type BELT Spindle Nose A2-6 FEED Travel X 215 MM Travel Z 580 MM Rapid Speed X 24 M/MIN Rapid Speed Z 30 M/MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools 12 Tool Size - OD 25 MM² Tool Size - ID Ø 40 MM Indexing Time 0.12 SEC / STEP TAILSTOCK Taper MT 4 Quill Diameter Ø 65 MM Quill Travel 80 MM Travel 513.7 MM TANK CAPACITY Coolant Tank 150 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 23 KVA Thickness of Power Cable Over 16 MM² Voltage 415V / 50Hz / 3Ph MACHINE Floor Space (L x W) 2,925 x 1,650 MM Height 1,820 MM Weight 4,100 KGS Ncjdpfxox Tqppe Aqvot INCLUDED MACHINE OPTIONS CONVEYOR SIDE HINGED WITH CHIP BOX COOLANT GUN HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD OIL SKIMMER BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO PROGRAMMABLE TAILSTOCK IN LIEU OF STD STANDARD FACTORY FITTED MACHINE OPTIONS CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" TOUCH SCREEN MONITOR FOR FANUC (SMART GUIDE i) HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 150 LITRES FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (15 LITRES) CALL LIGHT (1 COLOUR) MACHINE MANUALS & OPERATOR HANDBOOKS TOOLBOX STANDARD TOOLING PACKAGE QUILL TYPE TAILSTOCK - 4MT WITH STD LIVE CENTER

Condition: new, Year of construction: 2023, functionality: fully functional, HYUNDAI-WIA SE2200LY WITH FANUC 0i-T PLUS CONTROL CNC LATHE WITH Y AXIS. TURRET UPGRADE - 12 STATION 24 POSITION BMT45, LIVE TOOLS 6K RPM, 2.75 KW MACHINE CONSTRUCTION & FEATURES ▪ 8” STANDARD CHUCK SIZE. ▪ 30° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ HIGH PERFORMANCE ROLLER LM GUIDEWAYS. ▪ 12 STATION HIGH SPEED RIGID SERVO DRIVEN TOOL TURRET - BMT45. [24 POSITION OPTION] ▪ 4,500 RPM HIGH POWER MAIN SPINDLE. ▪ 30 X 36 M/MIN RAPID TRAVERSE RATES – X & Z AXES. ▪ C-AXIS SPINDLE & WEDGE TYPE Y-AXIS. Swing Over the Bed Ø 600 MM Swing Over the Carriage Ø 600 MM Maximum Turning Diameter Ø 300 MM Maximum Turning Length 508 MM Bar Capacity – Main Spindle Ø 65 MM MAIN SPINDLE Chuck Size Ø 8” - 203 MM Spindle Bore Ø 75 MM Spindle Speed 4,500 RPM Motor (Max / Cont.) 15.0 / 11.0 KW Torque (Max / Cont.) 167 [150.3] NM Spindle Type BELT Spindle Nose A2-6 FEEDS Travel X 210 MM Travel Y 110 (± 55) MM Travel Z 560 MM Rapid Speed X 30 M / MIN Rapid Speed Y 10 M / MIN Rapid Speed Z 36 M / MIN Slide Type ROLLER LM GUIDEWAYS TURRET Number of Tools 12 [24 POSITION INDEX] Tool Size - OD 20 MM² Tool Size - ID Ø 32 MM Nsdjx Tqkmopfx Aqvoct Indexing Time 0.15 SEC / STEP Y-Axis Type WEDGE TYPE Milling Tool Speed 6,000 RPM Motor (Max / Cont.) 2.75 / 1.85 [2.8 / 3.8] KW Torque (Max / Cont.) 26.2 [27.0] NM Collet Size ER 20 - Ø 13 Type BMT45 HYDRAULIC NC TAIL STOCK (STD. LIVE CENTER) Taper MT#4 Quill Diameter Ø 56 MM Travel 580 MM Coolant Tank 200 L POWER SUPPLY Electric Power Supply 18 KVA Thickness of Power Cable OVER 16 MM² Voltage 415V / 50HZ / 3PH Floor Space (L x W) 2,960 X 1,730 MM Height 1,920 MM Weight 4,200 KGS STANDARD FACTORY FITTED MACHINE OPTIONS SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3-JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC FOR STANDARD CNC SPECIFICATION - SEE MANUFACTURER'S BROCHURE HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) MANUAL VIEWER OPERATION MEMO PART PROGRAM STORAGE - 2MB (1,000 REGISTERABLE PROGRAMS) PREMIUM TOOL OPERATION SCHEDULING SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 200 LITRES FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (15 LITRES) CALL LIGHT (1 COLOUR) BACK SPIN TORQUE LIMITER FRONT DOOR INTERLOCK TOOLBOX MAIN SPINDLE - 4,500 RPM, 15.0 / 11.0 KW, 167 NM BELT DRIVEN STANDARD TOOLING PACKAGE - SEE MANUFACTURER'S BROCHURE HYDRAULIC TYPE NC TAILSTOCK - MT#4 56 MM QUILL, STD LIVE CENTER 12 STATION BMT45 TURRET, LIVE TOOLS 6K RPM, 2.75 KW, 26 NM INCLUDED FACTORY FITTED MACHINE OPTIONS CHIP - BUCKET STANDARD CONVEYOR SIDE HINGED HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO QUILL FORWARD / REVERSE CONFIRMATION DEVICE

Condition: new, Year of construction: 2022, functionality: fully functional, HYUNDAI-WIA HD3100L FANUC 0IT PLUS CNC LATHE MACHINE CONSTRUCTION & FEATURES 12” STANDARD CHUCK SIZE. 30° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. HARDENED & GROUND BOX GUIDEWAYS FOR HEAVY DUTY CUTTING. 10 STATION HIGH SPEED RIGID SERVO TURRET. 2,800 RPM 26.0 /18.5 KW HIGH POWER MAIN SPINDLE. 24 X 30 M/MIN RAPID TRAVERSE RATES – X & Z AXES. ERGONOMIC DESIGN FOR EASY ACCESS TO CHUCK & TURRET. MACHINE CAPACITIES Swing Over the Bed Ø 750 MM Swing Over the Carriage Ø 500 MM Maximum Turning Diameter Ø 500 MM Maximum Turning Length 1,300 MM Bar Capacity Ø 102 MM MAIN SPINDLE Chuck Size Ø 12” – 305 MM Spindle Bore Ø 115 MM Spindle Speed (rpm) 2,800 RPM Motor (Max/Cont.) 26.0 / 18.5 KW Torque (Max/Cont.) 1,123 / 657 NM Spindle Nose A2-11 FEED Travel X 265 MM Travel Z 1,350 MM Rapid Speed X 24 M/MIN Rapid Speed Z 30 M/MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools 10 Tool Size - OD 25 MM² Tool Size - ID Ø 50 MM Indexing Time 0.15 SEC / STEP TAILSTOCK Type QUILL TYPE TAILSTOCK [PROGRAMMABLE TAILSTOCK] Taper MT5 [MT4] Quill Diameter Ø 100 MM Quill Travel 120 MM TANK CAPACITY Coolant Tank 220 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 27 KVA Thickness of Power Cable Over 16 MM² Voltage 415V / 50Hz / 3Ph MACHINE Floor Space (L x W)4,405 x 1,978 MM Height 1,850 MM Weight 7,200 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CONVEYOR SIDE HINGED WITH CHIP BOX SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) COOLANT GUN HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO STEADY REST PREPARATION - PROGRAMMABLE CLAMPING & TRAVEL PROGRAMMABLE TAILSTOCK IN LIEU OF STD QUILL TYPE TAILSTOCK - MANUAL TYPE MT#5 100 MM DIA QUILL, 120 MM QUILL TRAV STANDARD FACTORY FITTED OPTIONS CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 12 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC FOR STANDARD CNC SPECIFICATION - SEE MANUFACTURER'S BROCHURE HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) COOLANT TANK (SIDE TYPE) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (30 LITRES) CALL LIGHT (1 COLOUR) Nsdpfxjx Tigge Aqvsct TOOLBOX STANDARD TOOLING PACKAGE - SEE MANUFACTURER'S BROCHURE STANDARD LIVE CENTER

Condition: used, Year of construction: 2019, operating hours: 5,450 h, Equipment: air conditioning, Year of manufacture: 2019 Drive: Wheel Njdpfx Ajy Nwz Djqvjct Empty weight: 14.000 kg Dimensions (LxBxH): 769 x 250 x 314 cm Digging depth: 5.25 m

Condition: new, functionality: fully functional, power: 49.28 kW (67.00 HP), fuel type: diesel, color: yellow, overall weight: 9,250 kg, empty load weight: 9,250 kg, operation weight: 9,250 kg, Year of construction: 2023, operating hours: 1 h, Equipment: UVV, additional headlights, air conditioning, cabin, gripper hydraulics, hammer hydraulics, rubber tracks, Hyundai HX85A Year of manufacture: 2023 Operating hours: NEW; 2-year / 3,000 h warranty - Dipper arm 1,750 mm - Dipper arm safety valves - With working light on boom - Offset boom 3,920 mm - Front dozer blade - Boom safety valves - With bucket linkage - Rear counterweight 1,150 kg - Standard key - Front working lights - Reversing camera - Hi-mate (mobile version) - Fuel pump - Piping for quick coupler - Proportional piping for rotation function - Mechanically suspended, heated driver's seat - Hydraulic oil - VG46 - Hyundai standard paint Ncjdpfxoy Rft Ds Aqvet - Rubber crawler tracks (toothed) - Central lubrication system - Price excludes attachments

Condition: excellent (used), Year of construction: 2018, Hyundai vertical turning center, Type WIA LV500RM Year: 2018 Ncjdpfxsy S Sihe Aqvet CNC: Fanuc Turret: BMT 75 Chip conveyor Tilting and fork-liftable chip bin (Goubard)

Condition: used, Year of construction: 2008, operating hours: 50,669 h, functionality: fully functional, turning length: 2,110 mm, turning diameter over cross slide: 725 mm, turning diameter: 570 mm, spindle motor power: 30,000 W, spindle speed (max.): 2,000 rpm, spindle bore: 132 mm, travel distance X-axis: 320 mm, travel distance Z-axis: 2,200 mm, type of input current: three-phase, bar diameter (max.): 117 mm, quill diameter: 100 mm, swing diameter over bed slide: 780 mm, overall weight: 11,000 kg, Turning-milling center – HYUNDAI KIA SKT400LMC. The machine is working and under power. The machine is equipped with a high-class hydraulic steady rest with a range of Ø30–Ø245 mm, many jaws – around 90 sets, 10 of which are brand new. Tool holders for driven tools BMT75 – 2 radial and 2 axial, many holders for static tools. Two-speed gearbox, brand “BARUFFALDI”. Automatic door! The machine is very precise and stable. Specifications: Control FANUC 21i-T Swing 725mm Bar Capacity 117mm/132mm Chuck Size 320mm - Forkardt Maximum Cutting diameter 570mm Maximum Cutting Length 2110mm Milling Motor Power 7.5/5.5kW Milling RPM 4000rpm Tailstock Body Travel 2100mm Tailstock Quill Diameter 150mm Tailstock Quill Stroke 150mm Tailstock Taper MT #5 - BUILD IN Turret Positions 12 Station Rapid Feedrates 20m/minute Spindle Motor Power 37/30kW Spindle Nose A2-11 Spindle Speed 2000rpm Tool Size 32 x 32mm Tooling Configuration BMT 75 C axis 0.001 degree X axis Travel 320mm Z axis Travel 2200mm Machine Dimensions 6340 x 2165 x 2228mm Machine Weight 11000kg Nodoy Equ Tspfx Aqvsct

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 1,393 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,464 mm, fuel type: gas, mast type: triplex, construction height: 2,190 mm, fork length: 1,200 mm, total length: 2,676 mm, drive type: Treibgas, construction width: 1,230 mm, LPG forklift ISO class: ISO class 3 = 2,500 – 4,999 kg Ncsdpfjymtypsx Aqvjt Mast type: Triplex Technical condition: very good Front tyres type: superelastic Front tyres condition: 80 – 100% Rear tyres type: superelastic Rear tyres condition: 80 – 100% Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heater, full cab, air conditioning, full free lift, CE certificate, safety light,

Condition: new, Year of construction: 2025, machine/vehicle number: 20250501001, fuel type: diesel, motor manufacturer: Hyundai P086TI-1, General information Field of application: Construction Weights Empty weight: 2.035 kg Functional Generator capacity: 165 kVA Dimensions of cargo space: 331 x 113 x 180 cm CE mark: yes Other information Fuel consumption: 26.7 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A44J Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 185 l Additional information Please contact Team DPX for more information Ncedpfx Asw Sc Dusqvjt = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2026, machine/vehicle number: 19857, fuel type: diesel, motor manufacturer: Hyundai DP180LB, General information Field of application: Construction Weights Empty weight: 5.650 kg Functional Generator capacity: 710 kVA Dimensions of cargo space: 440 x 180 x 250 cm CE mark: yes Other information Fuel consumption: 136 Liter per Hour Prime ( 90% ) Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Additional information Nodpfx Aqsyhlf Tsvect Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank