Used Immersion Coolers for sale (1,427)

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials Lhedpfefz I N Tox Aanor In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system Lodofz Aw Hspfx Aanehr The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Condition: good (used), immersion heater -Power: max. 2000 W Lhjdpfxob A Iave Aansr -Step switch: 12 positions -Body: made of aluminum -Connection: 230 V -Weight: 5 kg

Condition: new, Year of construction: 2025, functionality: fully functional, FREEZERS AND COOLERS for supermarkets, mini-markets, coffee shops, etc. Plug-in and ready for use, freezers feature automatic HOT GAS defrosting, fitted with globally-renowned cooling equipment brands, available from 1 to 4 doors. Equipped with heavy-duty wheels for easy installation and removal. FULL GLASS doors with triple glazing for freezers and double glazing for coolers, featuring anti-mold resistant coating. Colored RAL 9005 (full BLACK), R290 refrigerant, with a fully adjustable electronic digital thermostat. Lodpfxsx I I Huj Aanjhr

Condition: used, tank capacity: 10,000 l, GENERAL INFORMATION Equipment: Spray head, crane lugs Design: Vertical Remarks: Sheet metal cut-outs in top plate (see photos); 2 electric immersion heaters each (functionality not guaranteed) Speed: 11 / 17 rpm Outer diameter: 2,680 mm Inner diameter: 2,550 mm Total height: 3,850 mm Heating/Cooling: available Insulation: available Power: 2 / 3 kW Agitator: anchor agitator Base type: height-adjustable feet Location: Bremen Nameplate: Volume: 10,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,000 mm Previous use: bitumen TANK Number of feet: 4 pcs HEATING/COOLING JACKET Internal temperature control: Immersion heater INSULATION Insulation jacket material: stainless steel EQUIPMENT Manhole/dome: on top plate (DN 500) Note: slight residues, dents on insulation jacket Outlet: 60 mm MATERIAL SPECIFICATION Foot material: stainless steel Lhsdoxqbnbjpfx Aansr AGITATOR 1 Voltage: 380 V Bottom bearing: Agitator arrangement: eccentric in top plate

Condition: new, TECHNICIAL SPECIFICATIONS: It can be manufactured from 304ss or 316ss Stainless material in accordance with the preferred surface treatment. The tank side walls are insulated with 50mm glass wool. The tanks that require heating can be produced with serpentine or electric heating. Temperature control is done digitally and follow-up is provided. If necessary, an air mixing device is added to the tanks. In the tanks, stainless ball type valves are used for discharge. WORKING PRINCIPLE: It is based on the principle of surface cleaning and processing by taking the material to be surface cleaned into the baskets as a general application and immersing it in tanks with chemical and / or water by means of a crane and waiting for a while. The aim is to clean the existing oil layer on the metal surface and create a thin film on the metal surface, thereby making the material more conducive to paint and more resistant to external factors. APPLICATION AREAS AND ADVANTAGES: Automotive sector, White goods sector, Lighting sector and General machinery manufacturing sector are facilities that do not require continuous production or provide high and equal quality with less labor in facilities where alternative solutions are not available due to the shape and size of the material or very high capacities are not reached. Chemical values ​​and temperature values ​​can be monitored and controlled by applying automation optionally. APPLICATION: Immersion type surface cleaning applications vary according to preference and required strengths for each sector. As two main applications show: - iron phosphate surface treatment - zinc phosphate surface treatment Lhedpfefw N Rtsx Aanor Apart from these, only applications for cleaning and oil removal can be made. There is an option additional to the immersion tank: * a drying oven * 2 stainless steel baskets DRYING OVEN: Generally, the working principle of drying ovens, which is the last step of immersion type surface cleaning units, is like BOX type ovens, however, in order to be suitable for immersion type surface cleaning facility, the parts of the lid are designed on the top side of the oven and the surface cleaning parts are dried in the same basket. In this type of drying system, the parts enter the drying oven and are ready for paint application after drying.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), overall weight: 4,500 kg, Equipment: compressor, freezer, Refrigeration machine with 2x dry coolers Cooling capacity: max 800 kW Number of cooling circuits: 2 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 2 Trane CHHP0N2TKG0N134A semi-hermetic screw compressors, shell and tube as evaporator, 2x oil separators, Guentner GBV 200 Evaporator TRANE EG 340 evaporator water concentration 560 liters Control cabinet 1x air-cooled condenser machine weight: 4500kg With dry coolers 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar Lhjdpfx Asrzq Aroanor The specified cooling capacity is at a water outlet of +7°C at a condensing temperature of +40°C.

Condition: like new (used), Temperature range (°C) -15 to 40 Cooling power (W) at 20°C 400 at 0°C 320 at -10°C 170 Overall consumption (VA) 500 Dimensions (d/w/h, mm) 460/305/225 Weight (kg) 21 Ljdpfolnbh Tjx Aanohr Flexible pipe (l, mm) 925 Coil (Ø/l, mm) 77/55 Electrical supply 230 V (50Hz) Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 2020, machine/vehicle number: 2200360489, cooling capacity: 178 kW (242.01 HP), type of input current: three-phase, type of cooling: water, overall weight: 2,907 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 30.4 m³/h, pump pressure: 3.16 bar, total width: 1,250 mm, total length: 4,660 mm, total height: 2,150 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process air cooler/ chiller/ water chiller, air-cooled, Type: TAEevo Tech 902 P3 MTA S.p.A. TAEevo Tech 902 P3 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crankcase heater, phase monitoring, 950 ltr. buffer tank and built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 178 Cold water temperature outlet/ inlet (°C): 7 / 12 Volume flow (m³/h) 30.4 Available pump pressure (bar) 3.16 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. Power consumption (kW) 90 Max. Current (A) 160 Starting current circuit (A) 365 Protection class: IP54 Dimensions: Length (mm) 4655, width (mm) 1250, height (mm) 2151, Weight (kg) 2907 Connection Rp 3" Serial no.: 2200360489 Year of manufacture 2020 Condition: Visually 2, technically ok (used) Price: on request Lhsdpfx Aaery Udponor (Subject to technical changes and prior sale!) Used machines may have optical defects due to their use. Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Overall dimensions: 1720 x 1100 x 1600 mm Tank size: 1200 x 600 x 1400 mm Weight: 248 Kg Material: Acid resistant It is equipped with a connection suitable for filling and draining (ball valve), and a pneumatic (electric) valve serves to aerate the tank. Lodpfei Arlhox Aanohr

Condition: good (used), Charot Immersion tank 1000L immersion tank, insulated jacket, pressure vessel Lsdeqqhhfepfx Aanshr

Condition: used, Standard coolers, car coolers, oil coolers, heat exchangers -Oil cooler -Cooler area: 300 x 300 mm -with: fan Ledpfodkx Sysx Aanohr -Dimensions: 300/160/H360 mm -Weight: 9 kg

Condition: good (used), Year of construction: 1984, - 6 rows of bottle cages Lhsdpfxjralr Ho Aanor - WITHOUT OZONE GENERATOR - Machine in working condition - Machine available immediately - Video available on request

Condition: used, Aqua’s optimised adiabatic cooling system achieves a perfect balance between load, water usage and fan speed. The innovative control management system engages the water spray only when absolutely necessary. This ensures maximum water evaporation with minimum water wastage. In addition, all spray pipework is constructed in stainless steel rather than plastic, eliminating any risk of corrosion. The coil is protected with a hydrophilic coating. Adiabatic coolers are low-maintenance, cost-effective, and environmentally friendly options for temperature control at your facility. They are a popular alternative to cooling towers and are used in situations requiring water temperatures of 25˚C and above. Lodpfx Aewv Raajanshr

Condition: used, functionality: fully functional, Linear blancher made of stainless steel with sheets to keep the whole product under the water. Lodpfx Aajwny Htenehr EQUIPPED WITH: Plantform. Steam inlet valve. ELEVATOR DIMENSIONS: Total length: 6m Total width: 2m Discharge height: 6 m Working width: 62cm Distance between paddles: 25 cm Paddle height: 7.5cm PRE-BLANCHER DIMENSIONS Total length: 6.85 m Total width: 1.70 m Total height: 2.60 m Working width: 85cm Paddle height: 28.5 cm. BLANCHER DIMENSIONS: Total length: 8.85 m. Total width: 1.70 m Working width: 85cm Paddle height: 28.5 cm. COOLER DIMENSIONS: Total length: 12.30 m Total width:1.70 m Total height: 3.57 m Discharge height: 2.60 m

Condition: ready for operation (used), Sump pump, submersible pump, transfer pump, Brinkmann-Pumpen D-5980, used machine Manufacturer: Brinkmann-Pumpen D-5980 Type: TC250/720 Overall dimensions: 1180 x 230 x 290 mm Electrical data: 400V; 11.5A; 5.5kW; 2900 RPM Weight: 35 kg Capacity: 250 liters/minute Lhodpfx Aovgwqhoanor

Condition: used, Standard coolers, car coolers, oil coolers, heat exchangers Lhodscx T E Ispfx Aaner -Oil cooler -Max. Operating pressure: bar -Temperature range: up to 120 °C -without fan -Dimensions: 420/120/H650 mm -Weight: 32 kg

Condition: new, Year of construction: 2025, control type: CNC control, controller manufacturer: ESA veya LYNCA, laser type: fiber laser, sheet thickness (max.): 40 mm, travel distance X-axis: 8,030 mm, travel distance Y-axis: 2,030 mm, travel distance Z-axis: 120 mm, power: 15 kW (20.39 HP), Working Area: 8000 × 2000 mm (8020 Model) STANDARD FEATURES CNC-controlled fiber laser sheet metal cutting machine High rigidity, heavy-duty steel frame and bridge structure, FEM-analyzed Rack and pinion drive system Laser cutting head with automatic motorized focusing Automatic height control system with capacitive sensor Automatic focus distance adjustment during cutting High-precision linear guides and servo motor system Advanced touchscreen CNC control unit (Windows-based) User-friendly CNC interface with multi-language support EtherCAT communication infrastructure Monitoring of temperature, pressure, protective glass status, and back reflection at the cutting head Internal and external machine monitoring system with camera support LED status and warning indicators Fiber laser beam transmission via fiber cable (no optical mirror/lens loss) Automatic sheet recognition and alignment systems Fly-cut (continuous serial cutting) capability No Piercing mode for burr-free cutting of thin sheets Controlled piercing mode for thick sheet cutting Fully enclosed cabin design in accordance with CE standards Special safety glass resistant to laser beams CNC-controlled filtered ventilation system Automatic nozzle cleaning and cutting head calibration Conveyor slag and part discharge system Moveable table system Emergency stop buttons and safety interlocks OPTIONAL FEATURES Dual pallet automatic table exchange system Fiber laser resonator in various power options Automatic sheet loading system Automatic parts unloading system Advanced CNC-controlled filtration unit Camera-based automatic sheet recognition and nesting software Remote monitoring and reporting package Lhedpfx Ajx Nqtmoansr Oil cooler / climate control system Additional LED lighting inside the cabin Special cutting head alternatives Additional gas control and pressure regulation systems TECHNICAL SPECIFICATIONS (8020 MODEL) Axes X Axis: 8030 mm Y Axis: 2030 mm Z Axis: 120 mm Motion Performance Acceleration: 2.0 G Max. axis speed: 140 m/min Synchronized speed: 200 m/min Positioning accuracy: ±0.05 mm Repeatability accuracy: ±0.03 mm Table and Loading Max. table loading capacity: 3,500 kg Table exchange time (optional): ~35 sec Laser Power Options 4 kW / 6 kW / 8 kW / 10 kW / 12 kW / 15 kW Cutting Capacities (max.) Mild steel: 25 – 40 mm (depending on power) Stainless steel: 10 – 30 mm Aluminum: 10 – 30 mm Gas Pressures Oxygen: 13 bar Nitrogen: 25 bar Air: 13 or 25 bar General Machine weight: ~32,000 kg Average power consumption: 30 – 110 kW/h (depending on laser power)

Condition: used, Used SGL Carbon Technic Sas (France) model CKL7 diam.16 - 10 blocks, graphite (DIABON NS1) heat exchanger/cooler-condenser with surface area 102,6 sq. meters. Has 10 graphite blocks, each diameter 765 mm x 347 mm height. Construction material of shell P265GH (W.Nr. 1.0425). Process side rated full vacuum/3bar at 1 to 110 deg.C. Design pressure -1/3Bar at 1 to 110 deg.c. Service side rated 5 bar design pressure at 1 to 40 deg.C. Process side capacity 542 litre and service side capacity 648 litre. Product inlet diameter: 450 mm and 100 mm outlet. Dimensions: 1000 mm diameter x 4520 mm height. Mounted on (3) lugs. New 2010. Transport dimensions: 4700 mm lenght x 1 450mm width - 1700 hight. Transport weight: 5 600 kg, (only exchanger 4950 kg). Lhjdpfxjx Nixze Aansr Weight: Actual: Kg5600.0

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 17,400 h, control type: CNC control, actuation type: hydraulic, controller manufacturer: TRUMPF, controller model: TASC 6000, bending force (max.): 230 t, working width: 3,230 mm, stroke length: 445 mm, throat depth: 420 mm, distance between stands: 2,690 mm, installation height: 615 mm, operating speed: 10 mm/s, number of axes: 6, type of crowning: CNC-controlled, oil tank capacity: 330 l, travel distance X-axis: 600 mm, back gauge adjustment: CNC-controlled, back gauge: 860 mm, overall weight: 16,000 kg, total length: 4,270 mm, total width: 2,120 mm, total height: 3,200 mm, number of support arms: 2, Equipment: CE marking, angle measuring system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, + 2 quick-adjustable support consoles on linear guides + 6-axis backgauge system (X1, X2, R1, R2, Z1, Z2) with control cabinet air conditioning + Hydraulic and hardened upper tool clamping + CNC-controlled crowning + Preparation for ACB + BendGuard safety device for 200 mm/s Standard equipment: Lhsdpfxsx Elxvs Aansr - Four-cylinder upper drive concept - Electrohydraulic ram drive with proportional valve technology - Ram travel measurement system - Modern block hydraulics - Electronic pressure scale - Spherical suspension and inclination of the pressure beam - CNC backgauge system - Safe forward finger adjustment - 2 stop fingers - Self-centering, manual, hardened upper tool holder for vertical tool change - Hardened, hydraulic lower tool holder - Flat front cover - Modern safety guard - CE mark - Oil cooler - Control cabinet cooling (air-air) - Operating manual

Condition: excellent (used), Year of construction: 2003, Veneer Composing Machine Electric motor, separate for chains and glue application Glue is applied to the edge of the newly inserted veneer strip, which increases the strength of the glue joint. Robust, durable stainless steel conveyor chain with flexure joints Separate controls for temperature, speed, and pressure Quick and easily accessible glue tank for fast and convenient refilling or cleaning Multiple heating zones for individual temperature adjustment Extended glue tank lifetime due to integrated cooling unit Continuously adjustable feed speed Lodpfx Ajxgg Hhjanshr INCLUDES GLUE COOLER Technical Data: Throat depth: 1200 mm Veneer strip width: 45–1200 mm Veneer strip length: 300–3200 mm Veneer strip thickness: 0.4 – 3.0 mm Veneer moisture content: max. 8–12 % Working height: 900 mm Feed speed: 5–50 m/min Heating zone length: 1000 mm Max. heating temperature: 250 °C Electrical connection: 9.0 kW, 400 V, 50 Hz Compressed air: 6 bar Dimensions (L x W x H): 2400 x 2300 x 1900 mm Weight: 1500 kg SPARE PARTS VALUED AT EUR 3,500 HAVE BEEN INSTALLED

Condition: new, Year of construction: 2025, control type: CNC control, controller manufacturer: ESA veya LYNCA, laser type: fiber laser, sheet thickness (max.): 35 mm, travel distance X-axis: 6,030 mm, travel distance Y-axis: 2,030 mm, travel distance Z-axis: 120 mm, power: 12 kW (16.32 HP), Working Area: 6000 × 2000 mm (Model 6020) STANDARD FEATURES CNC-controlled fiber laser sheet metal cutting machine Heavy-duty, high-rigidity, fully analyzed steel frame and gantry structure Rack and pinion drive system Laser cutting head with motorized automatic focusing Automatic height control system (capacitive sensor) Automatic focus adjustment during cutting High-precision linear guides and servo motor system Advanced Windows-based touch-screen CNC control unit User-friendly CNC interface with multi-language support EtherCAT communication infrastructure Cutting head monitoring: temperature, pressure, protective glass status, and back reflection Internal and external camera-assisted monitoring system LED status and warning indicators Fiber-optic delivery of laser beam (no optical mirror/lens losses) Automatic sheet detection and alignment systems Fly-cut feature for uninterrupted serial cutting No Piercing mode for burr-free cutting of thin sheets Controlled piercing mode for thick plate cutting Fully enclosed CE-compliant cabinet design Special protective glass blocking laser radiation CNC-controlled filtered ventilation system Automatic nozzle cleaning and cutting head calibration Slag and part removal system with conveyor Movable table system Emergency stop buttons and safety interlocks OPTIONAL FEATURES Automatic shuttle table system (dual pallet) Fiber laser resonator options with various power ratings Automatic sheet loading system Automatic part unloading system Advanced CNC-controlled filtration unit Camera-based automatic sheet detection and nesting software Remote monitoring and reporting package Oil cooler / air conditioning system Additional LED lighting inside enclosure Special alternative cutting heads Additional gas control and pressure regulation systems TECHNICAL SPECIFICATIONS (MODEL 6020) Axes X Axis: 6030 mm Y Axis: 2030 mm Z Axis: 120 mm Motion Performance Acceleration: 2.5 G Maximum axis speed: 150 m/min Synchronized speed: 210 m/min Positioning accuracy: ±0.05 mm Repeatability: ±0.03 mm Table and Loading Maximum table load capacity: 3000 kg Table exchange time (optional): ~30 s Laser Power Options 3 kW / 4 kW / 6 kW / 8 kW / 10 kW / 12 kW Maximum Cutting Capacities Lhjdjx Nqr Nepfx Aanjr Mild steel: 20 - 35 mm (depending on power) Stainless steel: 8 - 25 mm Aluminum: 8 - 25 mm Gas Pressures Oxygen: 13 bar Nitrogen: 25 bar Air: 13 or 25 bar General Machine weight: ~26,000 kg Average power consumption: 25 - 90 kW/h (depending on laser power)

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Sturdy base frame and manipulator made of cast aluminum construction - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via internet - Convenient operation: screen, mouse, keyboard Ledjxayl Depfx Aanohr Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking

Condition: new, Year of construction: 2025, control type: CNC control, controller manufacturer: ESA veya LYNCA, laser type: fiber laser, sheet thickness (max.): 30 mm, travel distance X-axis: 4,030 mm, travel distance Y-axis: 2,030 mm, travel distance Z-axis: 120 mm, power: 10 kW (13.60 HP), Working Area: 4000 × 2000 mm (Model 4020) STANDARD FEATURES - CNC-controlled fiber laser sheet metal cutting machine - Stress-relieved, rigid and heavy-duty steel body and bridge structure - Rack and pinion drive system - Laser cutting head with automatic motorized focusing system - Automatic height control sensor - Auto focus distance adjustment during cutting - High precision linear guideways and servo motor system - Advanced touch-screen CNC control unit (Windows-based) - Multi-language supported, user-friendly CNC interface - EtherCAT communication infrastructure - Monitoring of cutting head temperature, pressure, protective glass status, and back reflection - Internal and external machine monitoring camera system - LED status indicators - Fiber laser beam transmission via fiber optic cable (no consumable optics) - Sheet detection and automatic alignment technologies - Fly-cut feature (serial cutting without changing cutting direction) - No Piercing technology for thin sheets - Piercing mode for thick sheets - Fully enclosed cabin design compliant with CE standards - Laser-proof special safety glass - Filtered ventilation system (CNC controlled) - Automatic nozzle cleaning and head calibration - Conveyor-based slag and part removal system - Movable table system - Emergency stop buttons and safety interlocks OPTIONAL FEATURES - Dual-pallet automatic table exchange system - Fiber laser resonator with different power options - Automatic sheet loading system - Automatic part unloading system - CNC-controlled filter unit - Advanced camera-based sheet recognition and nesting system - Additional camera and remote monitoring package - Oil cooler or climate control system - Additional LED illumination in cabin - Special cutting head options - Additional gas control and pressure regulation systems TECHNICAL SPECIFICATIONS (MODEL 4020) AXES - X Axis: 4030 mm - Y Axis: 2030 mm - Z Axis: 120 mm Performance - Acceleration: 2.5 G - Max. axis speed: 150 m/min - Synchronized speed: 210 m/min - Positioning accuracy: ±0.05 mm - Repeatability: ±0.03 mm Table & Loading - Max. table load capacity: 2500 kg - Table exchange time (optional): ~30 sec Laser Power Options - 2 kW / 3 kW / 4 kW / 6 kW / 8 kW / 10 kW Maximum Cutting Capacities - Mild steel: 16 – 30 mm (depending on power) - Stainless steel: 6 – 22 mm - Aluminum: 6 – 20 mm Gas Pressures - Oxygen: 13 bar - Nitrogen: 25 bar Lodpfxex Nqrio Aanehr - Air: 13 or 25 bar General - Machine weight: ~22,200 kg - Average power consumption: 20 – 70 kW/h (depending on power)

Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, working width: 3,100 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 2 °, stroke rate (min.): 15 1/min, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, STANDARD FEATURES CNC-controlled, angle-adjustable hydraulic guillotine shear CNC-controlled blade gap, stroke, and cutting angle adjustment Touchscreen CNC control unit (ELGO P40T) Automatic cutting angle adjustment based on material type and thickness Automatic stroke shortening for short sheet cuts (higher speed) CNC software infrastructure to minimize user errors Stress-relieved, heavy-duty steel welded frame Hardened guides and roller-guided upper table movement system 1,000 mm CNC-controlled, motorized and programmable backgauge Backgauge features: - Programmable retract function - Lifting feature for long workpieces - ±0.1 mm positioning accuracy Ball screw sheet support front table Top blade: 2 cutting edges / Bottom blade: 4 cutting edges High-alloy steel blades Special linkage system reducing maintenance needs Front support arms with ruler, T-slot, and stopper (1,000 mm) Cutting line illumination and shadow wire Front finger guard sheet (openable type) Front and side safety covers Foot pedal Movable control lever Emergency stop buttons Safety equipment compliant with CE standards OPTIONAL FEATURES Rear pneumatic sheet support system – Type 1 Rear pneumatic sheet support system – Type 2 (with front feeding function) Angle-adjustable front gauge (0–180°) Custom-length front support arms Full-length openable front finger guard cover Front finger safety light curtain Rear safety light barrier (CE compliant) Special blade options Laser cutting line Oil heater or oil cooler Automatic or manual centralized lubrication system Electrical cabinet air conditioning system CNC-controlled front sheet support and feeding arms Special throat depth (500 mm) Lightweight safety covers TECHNICAL SPECIFICATIONS (MODEL C 06 / 3100) Lhsdpfx Aajx Nqp Ijnsr Cutting capacity (450 N/mm²): 6 mm Cutting capacity (700 N/mm²): 4 mm Cutting length: 3,100 mm Cutting angle: 0.5° – 2° (CNC-controlled) Cutting stroke: automatically adjusted Throat depth: 250 mm Backgauge movement range (X axis): 1,000 mm Cutting speed: 10 – 15 strokes/min Motor power: 10 kW Oil tank capacity: 200 L Machine weight: ~6.7 tons Machine dimensions (LxWxH): approximately 4,830 x 2,995 x 1,975 mm