Used Indigo 3050 for sale (483)

Condition: good (used), Year of construction: 2005, operating hours: 63,102 h, machine/vehicle number: A0230A1162, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser hours: 28,387 h, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 115 mm, TRUMPF Trumatic L3050 Laser Cutting Machine Year of manufacture: 2005 Control system: Sinumerik 840D Laser type: TLF 6000 Laser power: 6000 W Working area X: 3000 mm Kfsdpfx Aex Ap A Rjanja Working area Y: 1500 mm Working area Z: 115 mm Max. speed X: 60 m/min Max. speed Y: 60 m/min Laser on hours: 63,102 h, Beam on hours: 28,387 h Max. sheet thickness (mild steel): 25 mm Max. sheet thickness (stainless steel): 20 mm Max. sheet thickness (aluminum): 15 mm Equipment: HI-LAS high-pressure cutting Cutting head with 5" lens Cutting head with 7.5" lens Quick-change cutting heads Sheet position detection system Laser positioning diode Programmable selection of cutting gases with stepless pressure adjustment Micro welds PMS plasma monitoring system Sprint-Las Head distance regulation (DIAS III) ContourLas AutoLas Plus Oil spray system Hydraulic pallet changer Work area lighting Longitudinal conveyor Sectional extraction system Filtration system Automatic shut-off Light barriers Tele-service RJ 45 3.5'' floppy disk drive User manual Used machine in good condition, inspected by qualified personnel. Machine available in March 2026.

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake port : 300 mm nominal motor power : 7,5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow : 6000 m³ / h Nominal volume flow : 5.089 m³ / h Negative pressure 2.587 Pa Filter area 30 m² Dimensions (L x W x H) in mm 3.000 x 1.361 x 2.817 Kfsdpfxsh D If Hs Aanja Briquetting capacity 30 - 50 kg / h Briquette diameter: 50 mm Weight: 1570 kg Machine is brand new in our STOCK - IMMEDIATELY AVAILABLE - subject to prior sale Location: 54634 Bitburg

Condition: excellent (used), Year of construction: 2021, total width: 1,900 mm, load capacity: 4,000 kg, fork carriage width: 1,050 mm, fork length: 1,600 mm, fork width: 130 mm, fork thickness: 60 mm, Fork Positioner Brand: Cascade Model: UPF3-0508 ISO Class: ISO Class 3 (51 cm) Year of manufacture: 2021 Lifting capacity: 4000 kg Forks: 1600 mm (130x60x1600IIIB) Technical condition: very good, only 800 operating hours on the forklift Opening range: 540-1900 mm Technical documentation available. Kjdpfxew Afdmj Aanofa Stock number: 1023

Condition: used, Year of construction: 2013, gearing type: other, first registration: 01/2013, color: orange, mileage: 1,001 km, empty load weight: 3,350 kg, driver cabin: other, Vehicle location: in transit, Body: interchangeable system, combined spreader 5 m³ and dry material container approx. 6,600 l, approx. 5 m³ Wet salt tank 1,720 l, 3 x brine tanks of 1,650 l each, total approx. 6,670 l Kfodpfxoxv D Uhs Aanja All information subject to change as the vehicle is in transit! ACCESSORY INFORMATION WITHOUT GUARANTEE – subject to change, prior sale, and errors!

Condition: excellent (used), Year of construction: 2003, Manufacturer: ROVETTA Year: 2003 Condition: Used Stock number: 0385 Pressing force: 630 tons Number of connecting rods: 4 Slide stroke: 300 mm Slide adjustment: 250 mm Die clearance at BDC: 950 mm Strokes per minute: 15/65 Maximum front opening: 5,200 mm Table dimensions: 5,000 x 2,630 mm Slide dimensions: 5,000 x 2,630 mm Kfedpfoxlh Rfsx Aanoa Main motor power: 132 kW

Condition: ready for operation (used), Year of construction: 1964, working width: 3,050 mm, sheet thickness (max.): 10 mm, total length: 4,250 mm, total width: 2,800 mm, total height: 1,800 mm, Working width: 3050 mm Kfedpoxrculsfx Aanea Sheet thickness: 10 mm Equipped with infeed table 2500x2000 mm

Year of construction: 2008, condition: excellent (used), Technical data Manufacturer: METRIS/Coord3 Type: KRONOS 30-50-13 Year of manufacture: 2008 Measuring plate width: 2225 mm Holes: 65mm Height- upper edge plate: 75cm Height plate: 50cm Kedoiy Rz Sepfx Aanefa Height bottom - plate: 25cm The machine can be modernized with new accessories according to customer's requirements. Price: on request! Assembly and commissioning possible! We will be happy to provide you with a detailed offer. Note: Our offer is directed exclusively to professional customers. (Changes and errors in the technical data, specifications and prices and prices as well as subject to prior sale).

Condition: excellent (used), Year of construction: 2006, laser power: 6,000 W, Used Low Cutting Hours Trumpf Trumatic L3050 6kw cnc laser cutting machine for sale Technical information: Year 2006 Workpiece dimensions 3000 x 1500 mm / 3metre x 1.5metre Type of Laser TLF 6000 Power 6000 Watt / 6kw Control Siemens Sinumerik 840D Longitudinal travel X-axis 3000 mm Cross travel Y-axis 1500 mm Height travel Z-axis 115 mm Travel speed 200 m/min Max cutting thickness in steel 25 mm Kfjdpfx Aaorvhzmjnoa Weight 12 ton Delivery and installation complete with tuition can be arranged.

Condition: used, power: 159 kW (216.18 HP), fuel type: diesel, lifting height: 29,700 mm, Year of construction: 2008, operating hours: 8,474 h, Technical information Make of engine: Perkins Top speed: 40 km/h Empty weight: 23.000 kg Functional Lifting capacity: 5.000 kg Identification Serial number: 756947 Other information Kfodpfjwx D Nasx Aansa Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Michellin Transport dimensions (LxWxH): 7.8x2.5x3.2 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2013, gearing type: other, first registration: 01/2013, color: orange, mileage: 1,001 km, empty load weight: 3,090 kg, driver cabin: other, Vehicle location: in transit, Body: exchange system, combined spreader unit 5 m³ and 7,500 l dry material container, approx. 5 m³ Brine approx. 7,500 l With brine spraying system, wind deflector, and support legs! Kjdpfexvdxajx Aanefa All information is provided without guarantee as the vehicle is in transit! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Year of construction: 2019, condition: new, Electrically heated continuous furnace, make VEI-Engineering type: DLNTO-EB 830-500 heat treatment: tempering Kfodjd Sg Hhjpfx Aanja temperature max. 500°C working temperature: 220-450°C clear dimensions (w x h): 800 x 210 mm heated length: 4.950 mm heating power: 2 x 30 kW fans: 2 x 5,5 kW Cooling water for 2 heat exchangers: inlet max. 2 bar PLC: Siemens S7

Condition: excellent (used), functionality: fully functional, overall weight: 9,000 kg, Year of construction: 2022, operating hours: 1,323 h, The DENN NTR-130/50 CNC spinning machine was manufactured in 2022 in Spain by INDUSTRIAS PUIGJANER S.A. The machine is designed for metal forming of components made from a wide range of materials, including brass, silver, iron, and stainless steel. The forming process relies exclusively on the plastic deformation properties of metals, eliminating the need for cutting tools. The automatic DENN spinning machine allows both spinning and flow forming. Both processes use precision rollers that form the desired shapes by applying pressure to a rapidly rotating workpiece. Flow forming differs in that the part is shaped using multiple passes of a roller along the mandrel, resulting in components with uniform wall thickness and a smoother finish. Within the rigid frame of the machine are all essential elements built to the highest technical standards. This includes a sturdy and reliable machine bed, a hydraulic tailstock, and a headstock equipped with an internal ejector for finished parts. The control system enables full interaction between the operator and the machine. The NTR 130/50 spinning machine is offered with a comprehensive set of accessories, including CAD/CAM software, an additional support roller, and trimming devices. The machine has logged only 1,323 operating hours since new. The total weight of the machine is approximately 9,000 kg. Technical data of the DENN NTR-130/50 heads and bottoms spinning machine: - Maximum workpiece thickness (aluminum): 7 mm Kjdpfow N Ikzsx Aanofa - Maximum workpiece thickness (steel): 5 mm - Maximum workpiece thickness (stainless steel): 3 mm - Working head spindle speed: 1,500 rpm - X/Z-axis travel: 800/400 mm - X/Z-axis force: 40 kN - Center height: 650 mm - Distance between centers: 1,500 mm - Operating hours: 1,323 h - Machine on-time: 2,495 h - Main drive power: 51 kW - Ambient temperature: +5°C/+35°C - Air humidity at 25°C: 5–80% - Dimensions (L x W x H): 6,140 x 3,660 x 2,025 mm - Weight (DENN NTR-130/50): approx. 9,000 kg DENN spinning machine equipment: - CAD/CAM software: Denn Cad-Cam - 6-station tool magazine - Disk centering unit for the start of the working cycle - Left-hand trimming device with tool holder - Right-hand trimming device with tool holder - Internal ejector for finished parts - 1,500 mm support roller - Steel roller PR-03 (4 pcs) - PR-03 roller holder at 45° angle (roller 30°) (4 pcs) - Tool holder support for the carriage at 45° (angle 0°) (2 pcs) - Spray lubrication unit for rollers

Condition: new, ELMAG reversible vibratory plate RPB30-50 with Honda GX200 engine, 30 kN centrifugal force, with steel protective frame Vibratory plates, reversible With stepless hydraulic switching between forward and reverse as standard. This allows large areas to be compacted with powerful machines. Vibratory plates with very high compaction performance in a wide range of versions to suit customer requirements. On all models, the machine is protected against damage by a high-quality steel protective frame. Incl. transport hook. Special accessories Kfsdpfxet Eggro Aanja - Rubber mat incl. holder - Wheel set ADVANTAGES Infinitely hydraulically adjustable forward and reverse travel Self-tensioning clutch system for reduced V-belt wear Crack and break-resistant base plate made of hardened steel Guide bar can be locked in vertical position during transport or storage New protective cage offers reliable protection for the motor and the device Extra strong rubber bearings installed Easy to mount transport wheels TECHNICAL DATA Centrifugal force 30 kN Max. Speed 20 m/min Area compaction 600 m²/h Engine type Honda GX 200 Power 4 kW Plate size 500x710 mm Working width 500 mm Vibration frequency 81 Hz Weight 181 kg

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 250 mm -Piston diameter: 40 mm -Piston rod: 16 mm Ksdpfxsfbbtij Aanjfa -Price: per piece -Number: 5 pieces -Dimensions: 412/54/H54 mm -Weight: 1.60 kg/piece

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), overall weight: 5,800 kg, color: blue, Year of construction: 2023, Guillotine shears HS-6X3050. MAIN SPECIFICATIONS: - cutting length: 3000 mm - cutting capacity (42kgf/mm2): 6 mm - cutting capacity (70kgf/mm2): 4 mm - stroke per minute: 17 - no. of clamps: 14 - max. pressure: 23 bar - travel of back stop 600 mm - no. of front support arms: 2 sets - distance between columns: 3250 mm - teble height: 900 mm - hydraulic tank capacity: 150 l - main motor: 11 kW - back roll motor: 0,75 kW - dimensions (WxLxH): 2350x3700x1800 mm - machine weight: 5800 kg STANDARD EQUIPMENT: - controller ELGO P40T (touch screen) - steel welded construction - adjustable motorized back gauge - manual central lubrication system - manual adjustable blade - hardened and grinded blades - front table with rolls - protection covers Kodpfxjrzrufs Aansfa - rear photocell protection - front cutting shadow wire - collapsable finger protection cage - emergency stops - electric components Schneider, ABB, Siemens - CE equipment

Year of construction: 2021, condition: as good as new (ex-display), Max. drilling diameter 50 mm Max. travel of spindle 315 mm Max. distance from spindle axis and column 1600 mm Min. distance from spindle axis and column 350 mm Max. distance from spindle nose to surface of base worktable 1220 mm Min. distance from spindle nose to surface of base worktable 320 mm Spindle taper MT 5# Spindle speed steps 16 step Kedpfx Ajh H Edieanefa Spindle speed range 25~2000 r.p.m. Spindle feed steps 16 step Spindle feed range 0.04~3.2 mm/r Dimension of worktable 500x630 mm Arm length 2140 mm Power of main motor 4 Kw Machine dimension 2500x1060x2655 mm Net. Weight 3.50 Ton

Condition: used, FAS belt conveyor 1090-630-500 RA2426 Manufacturer: FAS Motor: without motor, driven by overdrive Conveyor length (FL): 1090 mm Nominal/outer width (NB): 630 mm Belt width (GB): 500 mm Profile height: 170 mm Drive roller: Head drive Optional: supports Side guide Price: plus VAT from central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Kedpfjw Nq Tfex Aanjfa Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, year of last overhaul: 2025, Thieme model 3050L screen printing machine, fully refurbished. Kedpjxk T D Iefx Aanefa Format: 140x180 Year: 2007 Condition: Final stage of refurbishment Sartech is a company specializing in screen printing, automation, and robotics solutions, as well as the manufacturing of UV (electronic) or hot air tunnels.

Condition: new, Year of construction: 2025, functionality: fully functional, ADRIA Radial Drill Model Z3050X16 Year 2024 Condition New Drilling capacity on steel 50 mm Threading capacity 25 mm Vertical arm stroke 580 mm Cube dimensions 500x500x630 mm Spindle attachment CM No 5 Kfjdpfx Aaewq Emkjnea Spindle stroke 315 mm Number of speeds No 16 Number of feeds (16) 0.04/3.2 Distance spindle axis and column 1600/350 mm Distance spindle base 1220/320 mm Spindle speed 25/2000 Rpm Main motor 4 kw Hydraulic locks Complete with Cube Dimensions 2500x1060x2655 mm Weight 3500 kg Complete with Instruction book and CE Cert. READY FOR DELIVERY

Condition: used, Year of construction: 1974, machine/vehicle number: 00-0438-01, sheet width:100 - 500 mm coil weight:ca, 6 t coil internal dia.:400 - 500 mm coil external diameter:1500 mm sheet thickness - max.:0,8 - 3,5 mm Kedpeh Ra Spsfx Aanofa feed length:max. 10 m Feed speed:max. 75 m/min. diameter of the mandrel:360 - 420, 460 - 520 mm stroke height:550 mm :7500 kp weight of the machine ca.:ukb, t dimensions of the machine ca.:ca, 3,4 x 1,7 x 2,5 m HHS Automatic Decoiler, Model - BA 1.3-050/20 Decoiler for extra wide metal sheet (500 mm width, sheet thickness from 0.8 to 3.5 mm), with hydraulic loading / supporting table, Hydraulic operated expandable Coil Mandrel with pnematic cooling ventilation. Seperate Power cabinet with Electrial Wire Diagrams and Instruction manuals avilable.

Condition: excellent (used), Year of construction: 2012, Trumpf Trushear 5063 (2012) Guillotine Shear 3050x6mm Manufacturer: Trumpf Model: TruShear 5063 Year of manufacture: 2012 Condition: used, very good Control: ELGO P50 Cutting length: 3050 mm Sheet thickness: 6 mm / 4 mm for stainless steel Cutting angle: 0.5 – 2.8° Blade gap adjustment: 0.05 – 0.72 mm Automatic cutting angle adjustment Automatic blade gap adjustment Automatic blade gap compensation Hold-down devices: 20 pieces Strokes per minute: 18 – 38 Backgauge: 10-1000 mm, adjustable Total power requirement: 11 kW Oil capacity: 140 L Dimensions (approx.): L 4.00 x W 1.67 x H 1.90 m Total weight: approx. 7.2 t Customs tariff number: 84615090 Sheet support device Sheet return device Kjdoxrv Apjpfx Aanjfa Small parts chute 3x support arms Light barrier Foot pedal Documentation

Condition: used, functionality: fully functional, IMAL hydraulic guillotine shear 3050X6, with sheet support, motorized backgauge, throat depth 500 mm, backgauge 800 mm. Overall dimensions: 3700x1950x2100(H) mm, weight 8500 kg. Kodpfx Aowym Rceanofa

Condition: excellent (used), Model: DENER PUMA PX 30320 Year of manufacture: 2021 Serial number: 12352 Bending length: 3050 mm Pressing force: 320 tons Maximum hydraulic pressure: 280 bar Main motor power: 30 kW Kodpfx Ajxw U Rioansfa Oil tank capacity: 400 l Weight: 14,300 kg

Condition: reconditioned (used), Veneer saw / fine-cutting saw Consoles for rear support table Pneumatic pressure beam control Extraction channel Cutting length 3050 mm Cutting height approx. 50 mm Motor power 2.2 kW 400 V, 50 Hz Saw blade diameter approx. 180 mm Dimensions approx. L x W x H = 3800 x 1000 x 1200 mm Ksdpev D I Uxjfx Aanjfa Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: used, Year of construction: 2022, controller manufacturer: Sonstige, controller model: AMNC-3i, _____ Description: Control : Sonstige AMNC-3i Movement X/Y/Z : 3000/1500 mm Technical data Punching machine:EMK-3612MII (58) Punching force:300 kN Positioning accuracy:± 0.1 mm Number of tool stations:58 Machine frame:Bridge frame Machine table type:Brush table Punching drive:Servo-electric dual drive Kodpfx Ajx I T Dxeanjfa Travel range (X x Y):1525 x 3050 mm Control:AMNC-3i (21.5" screen size) Features :Punch & forming function :Good parts flap :scrap conveyor system Dimensions Length:5436 mm Width:6212 mm Height:2342 mm Weight:21500 kg