Used Laser cutting machines 3000-3999mm (x-travel) for sale (283)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 94,936 h, controller manufacturer: Siemens SINUMERIK 80 D, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 100 m/min, TECHNICAL DETAILS Working Area X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 600 mm B-axis: ±135° C-axis: n × 360° Speeds X / Y / Z axis: 100 m/min B / C axis: 540 °/s Acceleration Simultaneous: 17.3 m/s² X / Y / Z axis: 10 m/s² B / C axis: 200 | 100 rad/s² Maximum Positioning Accuracy Linear axes X / Y / Z: 0.03 mm Rotary axes B / C: 0.005° Maximum Positioning Deviation Linear axes X / Y / Z: 0.08 mm Rotary axes B / C: 0.015° MACHINE DETAILS Laser type: Solid-state laser TruDisk 3001 Laser output: 3,000 W Cutting gas: Nitrogen Control: Siemens SINUMERIK 80 D Operating Hours "Laser On" hours: 94,936 h Operating hours: 99,293 h EQUIPMENT Magnetic coupling Dynamic cutting optics with f = 150 mm Dkedexlctzjpfx Adksu FocusLine FastLine Cell ObserveLine Rotary changer D = 4,000 mm including safety backing Scrap conveyor 4× configurable control interface Valve terminal for 8 pneumatic clamps per side 2× load status indicator for rotary changer Extended compressed air supply on equipment panel including vacuum ejectors Cutting gas: compressed air Renishaw touch probe Measuring head (without probe) Measurement data processing 3× horizontal fixture interface Extraction ducting Protective enclosure for rotary changer including safety device, 1 window and column for control panel Status signal light (top & bottom) Video monitoring with camera Monitor mount Special installation Cooling unit KLH

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, laser power: 4,000 W, table length: 1,500 mm, table width: 3,000 mm, Equipment: cooling unit, No minimum price – guaranteed sale to the highest bidder! The machine was serviced in 2022 by an Amada specialist. The service protocol can be found attached to this listing! TECHNICAL DETAILS Laser power: 4 kW Table width: 3,000 mm Dksdpfoxgg Irjx Adkou Table length: 1,500 mm EQUIPMENT Ridel chiller Donaldson extraction unit 2 exchange tables

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, operating hours: 1,990 h, laser power: 12,000 W, sheet thickness steel (max.): 30 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,580 mm, travel distance Z-axis: 100 mm, Bystronic ByStar Fiber 3015 Dynamic Edition F12000 from year of manufacture 2023 with only 1,990 cutting hours! Original machine price was approximately GBP 767,000! TECHNICAL DETAILS Travel X-axis travel: 3,100 mm Y-axis travel: 1,580 mm Z-axis travel: 100 mm Maximum Sheet Thickness (Cutting) Steel: 30 mm Stainless steel: 30 mm Aluminium: 30 mm Brass: 15 mm Copper: 12 mm Positioning Speed Maximum positioning speed (X/Y parallel): 120 m/min Maximum simultaneous positioning speed: 170 m/min Positioning Accuracy Bilateral axis repeatability (R): 0.025 mm Mean bilateral axis positioning deviation (M): 0.05 mm Edge detection accuracy: ±0.5 mm Workpiece Weight Maximum workpiece weight: 1,100 kg Maximum workpiece weight on both shuttle tables: 1,850 kg Table Change Time Shuttle table changeover time: 25 s MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,150 x 6,000 x 3,200 mm Machine weight: 11,000 kg Laser Source Laser source: Fiber 12000 Power: 12,000 W Adjustable range: 1,200–12,000 W Dsdpfxoxlcz Ej Adkeku Wavelength: Fiber Consumption Total power consumption (incl. exhaust, cooler): 27 kW Operating Hours Cutting hours: 1,990 h Power-on hours: 13,428 h EQUIPMENT Detection Eye BeamShaper NCT & KerfScan 2nd high-pressure cutting gas channel Prepared for N2 generator Internal dust extraction system Electrical cabinet position: top (mezzanine structure not included) Note: The machine has already been dismantled, is in storage, and is no longer connected to power.

Condition: new, Year of construction: 2025, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 4000*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING Dksdpfx Aohv U Swsdkeu

Condition: ready for operation (used), Year of construction: 2014, General Data Measurements width 6550 mm Measurements depth 10500 mm Measurements height 2250 mm Main Drive Dsdsxlva Iopfx Adkjku Laser power 4000 W Movement X-Axis Movement 3000 mm Y-Axis Movement 1500 mm Z-Axis Movement 120 mm Max Material Thickness Steel 0–20 mm Stainless steel 0–12 mm Aluminium 0–10 mm This Baykal BLS-N 3015 was manufactured in 2014. It features a 4.0 kW fiber laser source and can handle sheet sizes up to 3000 × 1500 mm. With X-axis travel of 3000 mm, Y-axis travel of 1500 mm, and Z-axis travel of 120 mm, it offers a max positioning speed of 105 m/min. Consider the opportunity to buy this Baykal BLS-N 3015 fiber laser cutting machine. Contact us for more information. Application Types Cutting

Condition: good (used), Year of construction: 2027, Large format, machine no.: A0060A0763. Control system: Trumpf/Siemens 840 D. Max. punching force: 220 kN. Max. sheet thickness: 8 mm. Max. punching force: 220 kN. Simultaneous X/Y axis speed: 116 m/min. Punching stroke rate: 1,000 strokes/min. Marking stroke rate: 2,800 rpm. 21 tools on 4 tool holders. Max. working width: 3,000 mm. Support table, custom-made. Support table with vacuum lifter. Working width extended to 6,000 mm in manual mode. Sensor-based stripper monitoring. Light sensor on the punching head. Compressed air connection: 7-14 bar. Equipped with Gripmaster, manufacturer: Trumpf, serial no.: 0415045, retractable. Chip conveyor, manufacturer: Schlepp. Cooling water unit. Tool spray lubrication. Control cabinet. Automation: Trumpf SheetMaster, year 2007, length approx. 10,500 mm. Vacuum lifter. Stacking system, manufacturer: Stopa, type HZIE-501305, year 2007, load capacity 3,000 kg. Stacking system, manufacturer: Stopa, type HZIE-501300, year 2007, load capacity 3,000 kg. Dkedpfx Asxl Dypjdkju

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, operating hours: 49,200 h, machine/vehicle number: Aufbau und Inbetriebnahme möglich, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, workpiece weight (max.): 900 kg, warranty duration: 6 months, working range: 3,000 mm, +incl.preparation LiftMaster 1530; Liftmaster against surcharge Standard equipment: - Closed machine frame with integrated laser unit - Automatic pallet changer - Longitudinal conveyor belt for small parts and waste - Drives: Gantry drive in combination with linear direct drives - Cutting head quick-change device - Laser cutting head 250mm lens - Progr. cutting gas selection/pressure adjustment - APC capacitive height and process control (ControlLine) - AutoLas Plus (FocusLine) - Laser power control - Position laser diode - Hi-Las high-pressure cutting (NitroLine) - Sprintlas (FastLine) - ContourLas (ContourLine) - PMS plasma sensors (PlasmaLine) - Lens monitoring (LensLine) - Autom. sheet metal outer edge detection - Microweld - Automatic nozzle cleaning - Oil spraying device - Work area lighting - Automatic switch-off - Safety devices (multi-beam light barriers, encapsulated beam guidance) Dkodouviyqepfx Adkeu - Multi-chamber extraction system - Compact dust extractor - ToPs 100 lite -RJ 45 network connection - USB interface - TFT color screen - Detailed operating instructions

Condition: new, Year of construction: 2025, table length 3050 mm table width 1530 mm burner heads 1 stroke 290 mm speed 120 m/min Dkodpfx Aowp Ta Nsdkju

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, operating hours: 12,024 h, machine/vehicle number: A0240A0643, sheet thickness (max.): 20 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 1,700 kg, TECHNICAL DETAILS Working area X-axis: 4,000 mm Y-axis: 2,000 mm Dedpfsxgqv Hex Adkoku Z-axis: 115 mm Maximum cutting thickness: 20 mm Maximum workpiece weight: 1,700 kg Speed Simultaneous: 140 m/min Control: Siemens Sinumerik 840D SL Accuracy Position deviation Pa: 0.05 mm Mean positional scatter Psmax: 0.03 mm Laser: TruFlow 4,000 MACHINE DETAILS Connected load: 4,000 W Dimensions & Weight Dimensions (L x W x H): 12,000 x 5,300 x 2,200 mm Weight: 13,000 kg EQUIPMENT Separate control unit and cooling Trumpf LoadMaster Exhaust system Trumpf/Handte MF-L40/8/1 (Max. extraction capacity: 2,000 m³/h)

Condition: ready for operation (used), Year of construction: 2013, sheet thickness steel (max.): 25 mm, power: 6 kW (8.16 HP), Working area 3000x1500. Loadmaster system included.Due to not using machine for longer time,the service is required. Dedpfxswh R R Ns Adksku

Condition: used, functionality: fully functional, Year of construction: 2007, Table 3000 x 1500 mm Control Siemens Machien weight cca 12 000 kg Machioine dimensions 9300x4600x2200 mm Hours: Dedexfh Hajpfx Adkeku Beam 31 194 h Machine on 62 564 h Max plate thickness (steel): 20 mm - ControlLine - SprintLine - PierceLine

Condition: good (used), Year of construction: 2008, Machine no.: B0623A0001, cutting length 6,050 mm, cutting thickness 4 mm, back gauge 1,000 mm, net weight 20,900 kg, 15 kW, control system, manufacturer Elgo Electric, model P8721, 7 supports Dsdpfx Adsxl Du Tokoku

Condition: good (used), Year of construction: 2005, Used laser from PrimaPower Model Platino 1530HS YOM 2005 With changing table Dkodpexlfpxjfx Adkeu Table size 1500 x 3000 mm Including suction unit Video on request available

Condition: used, Year of construction: 2010, The machine is currently operational and available for inspection at any time. CNC Laser Cutting System TruLaser 3030 3200 Watt X-axis working range max.: 3000 mm Y-axis working range max.: 1500 mm Z-axis working range max.: 115 mm Control: Siemens Sinumerik 840D Laser power: 3200 watt Operating hours: 75,000 hours Sheet thickness St. max.: 20 mm Sheet thickness Ss. max.: 12 mm Djdpfoxc It Usx Adksku Sheet thickness Al. max.: 8 mm Standard equipment: - Enclosed machine frame with integrated laser unit - Laser unit: CO2 laser TruFlow 2000, high-frequency excited, maintenance-free turbo radial blower, reflective telescope, cooling unit, tracking log function - Automatic pallet changer - Longitudinal conveyor belt for small parts/scrap - Drives: Maintenance-free three-phase servo motors - Quick-change device for cutting head - Laser cutting head with 5" lens and additional 7.5" lens - Programmable cutting gas pressure control - Control Line - Focus Line - Laser power control - Laser diode positioning - Nitrogen Line - Sprint Line - Contour Line - Plasma Line - Automatic sheet edge detection - Programmable power cycles - Microwelding - Automatic shutdown - Work area lighting - Workshop programming - Safety: Multibeam light barriers, fully encapsulated and ventilated beam guide, monitoring system, multi-chamber extraction and compact dust extractor, protective enclosure - Network connectivity via teleservice installation (RJ45) - 3.5" disk drive

Condition: good (used), functionality: fully functional, Year of construction: 2017, Type: TruLaser 5030 fiber (L68); Year: 09-2017; Working area: 3000 x 1500 x 115 mm; Laser rated output: 8,000 Watt; Control: Siemens Sinumerik 840D SL; Operating hours*: approx. 42,770/30,000 h; Max. sheet thickness/steel: 25 mm; Max. sheet thickness/stainless steel: 20/40 mm (with BrightLine fiber); Max. sheet thickness/aluminum: 20/25 mm (with BrightLine fiber); Max. speed: 265 m/min; Positioning accuracy: +/- 0.1 mm; Length: 9,229 mm; Width: 6,145 mm; Height: 2,200 mm; Weight: 9,700 kg Dksdpsxlr R Njfx Adksu

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness brass (max.): 8 mm, total length: 3,000 mm, working range: 1,500 mm, Equipment: safety light barrier, Bystronic BySprint Fiber 3015, 4000W Maximum cutting area: X-axis: 3048 mm, Y-axis: 1524 mm, Z-axis: 70 mmNominal sheet size: 1500 x 3000Materials and maximum thicknesses of materials to be cut: Steel 20 mm, Stainless steel 15 mm, Aluminium 15 mm, Brass and copper 8 mm.Cutting accuracy: 0.1 mmPacking accuracy: 0.05 mmMaximum workpiece weight: 890 kg Dkjdpfjup Tfcex Adkou

Condition: new, table length 3000 mm table width 1500 mm burner heads Precitec ProCutter laser capacity in Watt 6000 x-axis 3050 mm z-axis 150 mm y-axis 1550 mm total power requirement 21 kW dimensions 9190 x 3710 x 2200 mm weight of the machine ca. 11200 kg Furnishing: - Resonator Ytterbium YLS 4000 compact - Beckhoff controller - Precitec ProCutter Automatic cutting head - autom. Lubrication system - CAD / CAM software LANTEK EXPERT CUT - 17 "touchscreen, keyboard, control panel Dkjdpfxjgvq D Uj Adksu - Collective conveyor under the cutting table - additional loading unit Cutting capacities: - normal steel 25 mm - stainless steel 15 mm - aluminum 12 mm - brass 8 mm - copper 8 mm Axes: - Machine axes: 4 axes (X, Y, Z, U) - s speed: 100 m / min (simulated) - Axis speed X / Y: 100 m / min (single) - Positioning accuracy: + - 0.03 mm / min - Burning height: 125 - 200 mm Loading table: - Number of pieces 2 (35 seconds for changing) - automatic change of tables - d 2,500 kg. assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminum - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system - Sick light barrier safety device - Spare part basic supply package Why Fibermak? - Up to 3 times faster cutting compared to other laser technologies - Machines for cutting thin sheets - axes equipped with linear motors / Servo motors reach up to 141 m / min. - Accelerations up to 2G - Fiber laser is the green laser technology (Saving of at least 50% energy costs) - There is no need for laser gas mixing - There is no need for optical Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - Extended options: cutting from reflective materials like aluminum, copper, brass etc., - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, equipped with world-famous, durable, high-quality components - ERMAK passes the price advantage on to its customers thanks to its fast and high quality production - Creative design, constant, highest technology and quality - High reliability - High efficiency - High quality - CE declaration

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 6,000 W, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 20 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, workpiece weight (max.): 1,000 kg, overall weight: 5,000 kg, positioning accuracy: 0.03 mm, Including 7.5 kW extraction system Compact, space-saving, and affordable fiber laser Manually extendable work table - electrically assisted Work table safety door opens and closes electrically Sturdy welded construction for high rigidity, precision, and durability Machine bed shielded by manganese steel plates to protect against heat, sparks, and slag Effective cutting fume extraction; controlled flaps focus the extraction power on the current work area Raycus laser source with autofocus laser head from HSG (optional laser source from IPG) Laser head with faster focusing speed than comparable units, resulting in higher penetration speeds with thicker materials Main lens protected by an easily replaceable double protective lens Efficient water cooling of the laser head Power stabilizer to compensate for voltage fluctuations, thus ensuring consistent cutting quality Very easy handling of the machine and the user-friendly software Control software with numerous templates for programming simple components Material storage management User-friendly nesting software with many features Camera-monitored laser work area with transmission to screen Dodpfjwf H Avox Adkoku

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Beam on: 24,314 h Laser on: 55,176 h Dedpfxoxfin Sj Adkoku

Condition: good (used), Year of construction: 2014, with changing table (without automtic storage) ByVision Touchscreen and manual control unit In contrast to the CO2 ByStar, the ByAutonom can change the cutting heads and cutting nozzles automatically. At the very end, only a BySprint could do that and then the new Fiber again. This means I can cut thick and thin material one after the other and the machine gets the right cutting head. Technische Daten / technical details: Laserleistung / laser capacity 6 kW Materialdicke Stahl / thickness of the material steel 25 mm Materialdicke Edelstahl / thickness of the stainless steel 20 Mm Materialdicke Alu / thickness of the material Aluminium 12 mm Dkjdpfxsqmmkco Adkou Blechgröße x,y / sheet size x,y 3000, 1500 mm Schneidbereich x,y,z, / cutting area x,y,z 3048, 1524, 80 mm Antriebsleistung / drive capacity 51 kW Gewicht ca. / weight ca. 15000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 10,000 h, laser hours: 10,000 h, laser power: 6,000 W, table length: 4,000 mm, table height: 2,000 mm, power: 6 kW (8.16 HP), Double table, in excellent condition Dodpjxlbggofx Adkjku

Condition: as good as new (ex-display), Year of construction: 2024, Machine dimensions: - (L x W x H) 9,350 mm x 2800 mm x 2300 mm, length with filter 5300 mm. Technical details: - Max. Sheet size: 3,048 x 1,524 Max. - Max. Sheet weight: 200 kg/m² -Laser power (IPG): 6 kW -Travel distance Z - axis: 125 mm -Max. Synchronization speed (X-Y): 141 m/min. -Max. Acceleration (X-Y): 10 m/s² - Positioning accuracy: ±0.05 mm - Repeat accuracy: ±0.05 mm Basic equipment: -Control: Siemens Sinumerik 840 D - Laser head: Precitec light Cutter F 125 Focus - Sheet position detection and measuring system -Positioning laser diode -Automatic plate changer -Automatic nozzle cleaner -Central lubrication unit - Chip tray - Software: Lantek, or Metalix Cad/Cam software with autonesting Dsdpfxod N Rfde Adkoku - Remote control: Remote maintenance Laser cutting options: - Pierceline (piercing settings) -Focusline - Plasmaline -Fastline - Flyline Options include: - Tower with 10 pallet positions - Automatic chip conveyor - Integrated camera (post-production of parts, micro-joints) - Air dryer - Auto. Nozzle Changer (automatic nozzle changer) - Inside camera

Condition: new, table length 3000 mm table width 1500 mm burner heads Precitec ProCutter laser capacity in Watt 4000 x-axis 3050 mm z-axis 150 mm y-axis 1550 mm total power requirement 22 kW dimensions 9190 x 3710 x 2200 mm weight of the machine ca. 11200 kg Furnishing: - MOMENTUM GEN - 2 fiber laser cutting machines 3,000 x 1,500 mm - Ytterbium YLS 4000 compact resonator (4 kW) - PRECITEC PROCUTTER laser cutting head - CAD / CAM software BECKHOFF - Controller CP 6242 - 17 "touchscreen, keyboard, control panel, alphanumeric keyboard - Collective conveyor under the cutting table - additional loading unit Cutting capacities: - normal steel ... 20 mm - stainless steel ... 12 mm - aluminum ... 10 mm - brass ... 6.0 mm - Copper ... 5.0 mm Workspace: - max .: 3,000 x 1,500 mm Axes: - Machine axes: 4 axes (X, Y, Z, U) - s speed: 100 m / min (simulated) - Axis speed X / Y: 100 m / min (single) - Positioning accuracy: + - 0.03 mm / min - Burning height: 125 - 200 mm Loading table: - Number of pieces 2 (35 seconds for changing) - automatic change of tables assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminum - compressed air or nitrogen (0.5 - 25 bar) included : - Compatible suction system - Light barrier safety device - Spare part basic supply package Djdpfogvq A Ejx Adkjku Why Fibermak / Fiberlaser? - Up to 3 times faster cutting compared to other laser technologies - Machines for cutting thin sheets - Axis speed: reach up to 141 m / min. - Accelerations up to 2G - Fiber laser is the green laser technology - Saving of at least 50% energy costs) - There is no need for laser gas mixing - There is no need for optical components - therefore, among other things, very low-maintenance - Save up to 50% per part through more efficient production - Extended options: cutting reflective materials * like aluminum, copper, brass etc., - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Creative design, constant, highest technology and quality - High reliability - High efficiency - High quality - CE declaration

Condition: excellent (used), Year of construction: 2008, Beam on: 21,660 h Dkodpfxoxfim Ie Adksu Laser on: 42,130 h

Condition: excellent (used), Year of construction: 2011, Beam on: 26,620 h Laser on: 49,485 h Dodpfjxfh Evjx Adkjku