Used Injection Machine for sale (64,704)

Condition: new, Year of construction: 2005, screw size 60 mm injection shot weight in Polysterol 607 g/PS closing pressure 3200 kN Control SELOGICA mould space 300 mm clamping plate 1040 x 1040 mm opening stroke 700 mm Rcodpfxjvkqfae Abpef total power requirement 96 kW weight of the machine ca. 17 t dimensions of the machine ca. 7 x 2.2 x 2.3 m This plastic injection moulding machine is in very good condition, can be inspected by can be inspected at the seller's premises by prior arrangement and is supplied incl. Multilift H. Operating hours: 42878h

Condition: excellent (used), Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Arburg Multilift H Side Robot Year of Manufacture: 2013 Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1,650 bar Rcodpfx Abjzc N Smjpjf Dosage volume: 474 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping mechanism: toggle lever Control system: SELOGICA – touchscreen Additional Equipment: Hybrid machine: high-speed, energy-efficient and very quiet Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Hot runner control x 12 Injection unit hardened – bimetallic Main machine motor – servo motor driven by frequency inverter – for energy savings Injection unit driven by a servo motor controlled by an inverter Machine equipped with cylinder/battery with compressed nitrogen (additional charge for fast operation) Centralized lubrication Automatic mold height adjustment Kistler sensor – mold pressure control The injection molding machine was operated in a so-called “cleaning room”, equipped with additional protective devices against contamination as well as two vapor absorbers Side robot Arburg Multilift H Year of manufacture: 2013 5-axis robot: Z-axis servo-driven (electric); X-, Y- and B-axis (rotation) pneumatically operated Robot safety package Robot with adapter, conveyor belt with electric height adjustment, safety enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 6,680 kg Length/width/height: 5.03x1.56x2.21 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Year of construction: 2017, condition: ready for operation (used), Clamping force: 1800kN, max. opening stroke: 750mm, min. mold installation height: 300mm, screw diameter: 40mm, L/D: 20, G4 S10, clear tie-bar spacing: tie-barless, max. stroke volume: 220cm³, injection rate: 223cm³/s, max. injection pressure: 1930bar, material barrel: M9 (bimetallic barrel), length: 6455mm, height: 2100mm, weight without mold: 13.7t, operating hours: 59,947h, with documentation. Available from December 2026, an on-site inspection is possible. Rodpfeztzqzex Abpjcf

Condition: excellent (used), Year of construction: 2013, KRAUSS-MAFFEI KM 550-4300 GX injection molding machine Year of manufacture: 2013 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 4300 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system with a color TFT monitor, integrated control panel, and USB data storage. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 90 mm Backflow valve: yes Nozzle: open Rodpfx Aezvm Dljbpscf Clamping unit Clamping force: 5500 kN / 550 t Mold opening force – pressure pads: 385 kN Platen dimensions (H × V): 1430 × 1350 mm Distance between columns (H × V): 1040 × 910 mm Maximum mold opening stroke: 1350 mm Minimum/maximum mold height: 400–950 mm Maximum distance between platens: 1750 mm Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20:1 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Injection rate: 636 cm³/s Screw speed: 195 rpm Nozzle clamping force: 129 kN Electrical and hydraulic equipment Rated motor power: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 728 mm Dry cycle time / stroke according to KraussMaffei standards: 2.5 s / 520 mm Oil tank capacity: 1180 l Dimensions and weight Machine dimensions (L × W × H): 8.08 × 2.80 × 2.39 m Net weight with control cabinet: 25.0 t

Condition: excellent (used), Year of construction: 2013, KRAUSS-MAFFEI KM 850-8100 MX injection molding machine – with servo drive Year of manufacture: 2013 Control system: MC5 Clamping system: hydraulic-mechanical, two-platen Drive: hydraulic with servo drive Design and control Hydraulic-mechanical, two-platen clamping system with 4 pressure cushions and 4 adjusting units mounted on the moving platen. PV – injection unit adjustment. MC5 PC (Pentium) control system with a color TFT monitor, integrated control panel, and USB data storage. Plasticizing unit Complete plasticizing unit for thermoplastics with wear-resistant coating. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Clamping unit Clamping force: 8500 kN / 850 t Opening force: 560 kN Mold mounting plate dimensions (H × V): 1600 × 1600 mm Distance between tie bars (H × V): 1140 × 1140 mm Mold opening stroke: 1600 mm Minimum/maximum mold height: 500–1100 mm Maximum distance between platens: 2100 mm Ejector stroke: 300 mm Ejector force, front/rear: 200 / 100 kN Injection unit 8100 Screw diameter: 105 mm Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight for PS: 4137 g Injection rate: 805 cm³/s Screw speed, standard / optional: 121 / 153 rpm Electro-hydraulic equipment Rsdpfjzvm A Iox Abpjcf Servo drive for the hydraulic system: YES Rated power of the pump motor: 110 kW Number of dry cycles according to EUROMAP 6: 965 cycles/h Oil tank capacity: 1500 l Dimensions and weight Machine dimensions (L × W × H): 10.81 × 2.92 × 2.57 m Net weight with control cabinet: 43.5 t

Condition: excellent (used), Year of construction: 2008, JSW J350AD Injection Molding Machine Electric injection molding machine Year of manufacture: 2009 Type: Electric injection molding machine Total installed power: 30 kW Clamping unit • Clamping force: 3440 kN • Distance between columns (H × V): 730 × 730 mm • Minimum mold height: 300 mm Rjdpjzvwwvofx Abpecf • Maximum mold height: 670 mm • Maximum mold opening stroke: 700 mm • Maximum ejector stroke: 152 mm • Maximum ejector pin height: 365 mm • Diameter of centering ring: Ø 160 mm • Dimensions of mold mounting plates (H × V): 1085 × 1085 mm Injection unit • Screw diameter: Ø 66 mm • Maximum injection shot weight for PS: 890 g • Maximum injection shot weight for PP: 767 g • Maximum injection speed: 160 mm/s • Maximum injection pressure: 1770 bar • Nozzle orifice diameter: 6 mm

Condition: good (used), Year of construction: 2008, functionality: fully functional, Ferromatik Milacron K-Tec 250 S, Year of manufacture: 2008, Control system: Moasic Control, Tool opening stroke: 850 mm, Screw diameter: 60 mm, Injection pressure: 2144 bar, Rcodpfozub Hrox Abpof Clamping force: 2500 kN, Maximum shot weight: 694 grams, Installed heating capacity: 22.7 kW, Hour meter: 5100 hours, Machine weight: 18,000 kg.

Year of construction: 2016, condition: ready for operation (used), A total of 9 partly dismantled Krauss Maffei injection molding machines are available. 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical parts. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical parts. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical parts. All injection molding machines include robots from Kuka, Krauss Maffei, Sar, or Sepro. On-site inspection is possible. Rsdpfxeugmx Aj Abpscf

Condition: excellent (used), Year of construction: 2013, Engel Victory 330H/80V/160 combi Ecodrive / Production line with the Sepro SR S5-25 S3 Trans robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2013 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2385 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total number of operating hours: 24,312 h Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Screw diameter in the vertical injection unit: ⌀22 mm - approx. 28 g/hp It is possible to purchase a turntable Robot Sepro SR S5-25 S3 Trans Year of construction: 2013 3-axis robot: 3 axes are driven by servomotors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-2000, Y-1000, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 8700 kg Length/width/height: 5.35x1.76x3.42 m Rjdpfjzc Nywsx Abpocf All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: used, Condition: used, with visible signs of use, was operational until placed in storage, control voltage: 24V, operating voltage: 230V, frequency: 50Hz, CO₂ pressure: 10bar, connected load: 500W, with CE marking. An on-site inspection is possible. Rsdpfx Abozwgikjpjcf

Condition: excellent (used), Year of construction: 2015, Krauss Maffei KM 1300-12000 MX injection molding machine LRX 350 robot Year of manufacture: 2015 Technical data Clamping unit • Clamping force: 13,000 kN (1300 tons) • Opening force: 910 kN • Platen dimensions: 2210 × 1910 mm • Tie bar spacing: 1570 × 1270 mm • Mold opening stroke: 2350 mm • Maximum opening: 3050 mm • Mold height: 700–1400 mm • Ejector stroke: 350 mm • Ejector force: 250 / 125 kN Injection unit Rcjdpfxszinans Abpef • Screw diameter: 105 mm • L/D ratio: 23 : 1 • Maximum injection pressure: 2296 bar • Injection volume: 5195 cm³ • Injection weight (PS): 3689 g • Injection speed: 99 mm/s • Injection rate: 856 cm³/s • Maximum screw speed: 144 rpm • Plasticizing rate (PS): 130 g/s Electrical equipment • Pump motor power: 132 kW • Heater power: 75 kW • Number of heating zones: 7 • Oil tank capacity: 2440 l Dimensions • Machine weight: 70 tons • Dimensions: 13.65 × 3.65 × 2.82 m Krauss Maffei LRX 350 robot • Maximum payload: 35 kg • X-axis: 1200 mm (servo drive) • Y-axis: 1000 / 1000 mm, telescopic (servo drive) • Z-axis: 3500 mm (servo drive) • C-axis: 0–90°, pneumatic drive • C-axis torque: 60 Nm • Absolute position measurement system

Condition: excellent (used), Year of construction: 2015, TEDERIC D250/1100 injection molding machine with SW6310S robot Manufacturer: TEDERIC Model: D250/1100 Year of manufacture: 2015 Serial number: D1025/0747 Robot: SW6310S Robot year of manufacture: 2019 Technical specifications Clamping force: 2,500 kN Screw diameter: 55 mm Centering diameter: injection side: 160 mm Rjdpfxjziiyvj Abpecf moving side: 100 mm Column spacing: 580 × 580 mm Minimum mold height: 250 mm Maximum mold height: 600 mm Maximum platen spacing: 1,150 mm Maximum opening stroke: 550 mm Injection volume: 601 cm³ Hydraulic ejector: YES Number of hydraulic cores: 2 Cores: on the nozzle side – YES on the closing side – YES programmable – YES Motor power: 31 kW Heater power: 19.7 kW Screw diameter: 55 mm Ejector stroke: 160 mm Screw: bimetallic Machine condition Total operating hours: 79,526 h Automatic operating hours: 40,612 h TEDERIC SW6310S robot (2019) included.

Condition: used, Year of construction: 2018, TEDERIC D450/3200 injection molding machine with SW7315DS robot Manufacturer: TEDERIC Model: D450/3200 Year of manufacture: 2020 Serial number: T3045-0141 Robot: SW7315DS Robot year of manufacture: 2018 Technical data Clamping force: 4,500 kN Screw diameter: 75 mm Centering diameter: injection side: 200 mm moving side: 100 mm Rcedpfx Abjzii Efspsf Column spacing: 780 × 780 mm Minimum mold height: 300 mm Maximum mold height: 780 mm Maximum platen spacing: 1,580 mm Maximum opening stroke: 800 mm Injection volume: 1,741 cm³ Hydraulic ejector: YES Number of hydraulic cores: 2 Cores: on the nozzle side – YES on the closing side – YES programmable – YES Motor power: 56 kW Heater power: 39.1 kW Screw diameter: 75 mm Ejector stroke: 200 mm Screw: bimetallic Machine condition Total operating hours: 42,864 h Automatic operating hours: 16,386 h SW7315DS robot (2018) included.

Year of construction: 1995, condition: ready for operation (used), A Ferromatik Milacron injection molding machine without additional and peripheral equipment is available. Clamping force: 1000kN, injection pressure: 2000bar, stroke volume: 254cm³, heating capacity: 14.8kW, tie bar distance: 508mm, machine weight: approx. 6750kg, operating hours: approx. 33649h. On-site inspection is possible. Rodpfowut Htsx Abpscf

Condition: used, Year of construction: 2005, operating hours: 67,553 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 30 mm, clearance between the columns: 355 mm, displacement volume: 106 cm³, injection weight: 96 g, mold height (min.): 210 mm, opening stroke: 400 mm, plate width: 480 mm, plate height: 480 mm, installation height: 400 mm, heating capacity: 8.3 kW (11.28 HP), power: 11 kW (14.96 HP), Machine DEMAG Ergotech Extra 50-200 with SEPRO Axess S3 handling robot. Ready for production and available for inspection at any time. 2 pneumatic cascades, 1 AS core pull, 6 integrated hot runner zones. Rcjdpfx Aox Ex R Eobpef

Condition: excellent (used), Battenfeld TM Xpress 350/2250 injection molding machine Control system: B6P Year of manufacture: 2014 Operating hours: 47,000 hours We offer a Battenfeld TM Xpress 350/2250 injection molding machine in very good technical condition. The machine is regularly serviced, fully functional, and ready for immediate operation. Technical specifications Clamping unit Clamping force: 3500 kN (350 t) Rjdpfx Aboziulwjpjcf Platen dimensions: 1030 × 1140 mm Distance between columns: 710 × 710 mm Minimum mold height: 300 mm Maximum mold height: 710 mm Maximum opening: 1380 mm Centering ring diameter: 160 mm Ejector stroke: 200 mm Injection unit Screw diameter: 65 mm Injection volume: 1171 cm³ Injection shot weight (PS): 1078 g Maximum injection pressure: 2070 bar Maximum injection speed: 600 mm/s Equipment 4 × pneumatic valve 1 × hydraulic core Dimensions and weight Length: approx. 6.9 m Width: approx. 1.9 m Height: approx. 2.4 m Weight: approx. 13,000 kg

Year of construction: 1992, condition: ready for operation (used), An injection molding machine Dr. Boy is available. Clamping force: 500kN, tie-bar spacing: 305mm/305mm, platen dimensions X/Y: 500mm/500mm, max. opening stroke: 350mm, max. platen spacing: 600mm, min. mold height: 250mm, max. screw stroke: 120mm. Machine dimensions X/Y/Z: approx. 3450mm/1050mm/2000mm, weight: approx. 2050kg. The system has minor defects requiring repair. Documentation available. An on-site inspection is possible. Rsdpfx Aboyw Svfspecf

Condition: excellent (used), Year of construction: 2012, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: ENGEL Typ: VICTORY 330/80 TECH Baujahr: 2012 Schließkraft: 80 Tonnen Holmabstand: HOLMLOS Schnecken DN: 35 mm Max. Hubvolumen: 110 ccm³ Spritzteilgewicht 100 g/PS Steuerung: CC200 Rcjdpfxeztp Ihj Abpjf Ausstattung: -Roboter, Hersteller: SEPRO, Typ: AXESS -2 x Kernzüge -Ausblasventil -Förderband -Sicherheitszaun

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 9171h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Redsyab I Ujpfx Abpscf

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Rsdeyab Nfepfx Abpocf

Condition: excellent (used), Year of construction: 2010, ARBURG 370 U 600-290 injection molding machine Year of manufacture: 2010 Clamping unit Clamping force: 600 kN (60 tons) Distance between tie bars (H × V): 370 × 370 mm Dimensions of mounting platens (H × V): 510 × 510 mm Minimum mold height: 200 mm Maximum daylight opening: 600 mm Opening stroke: 400 mm Ejector stroke: 125 mm Ejector force: 30 kN Injection unit Rcsdjzw Azvjpfx Abpof Screw diameter: 35 mm Injection volume: 144 cm³ Injection shot weight (PS): 132 g Maximum injection pressure: 2000 bar Screw L/D ratio: 20 Screw torque: 450 Nm Maximum injection speed (PS): 140 g/s Number of heating zones: 4 Nozzle stroke: 240 mm Dimensions and weight Machine dimensions (L × W × H): 3.80 × 1.45 × 2.12 m Total weight: approx. 3,500 kg

Year of construction: 2015, condition: ready for operation (used), Two complete injection molding facilities with two Husky injection molding machines, five complete tools with metal separator, gravimetric Motan mixing system and crane system are available. 1) 2x Husky H-PET230 AE RS95, year of construction: 2015, max. shot weight: 2424g, max. PET throughput: approx. 390kg/h. 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, bottom thickness: 2.30mm, cavities: 48, cycle time: 12.1s-12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, bottom thickness: 2.3mm, cavities: 48, cycle time: 14.4s-15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, bottom thickness: 2.2mm, cavities: 32, cycle time: 11s-11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, bottom thickness: 2.42mm, cavities: 32, cycle time: 13.4s-14s. 6) 48-cavity H-PET-AE mold. Total system dimensions X/Y/Z: approx. 24m/13m/5.5m. Including drying unit, mold dehumidification, color mixing devices and T-conveyor. Documentation available. An on-site inspection is possible. Redpfow Az Riex Abpscf

Year of construction: 2021, condition: ready for operation (used), An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible. Rsdpow Rqwtefx Abpecf

Condition: used, Year of construction: 2005, operating hours: 81,700 h, clamping force: 45 kN, displacement volume: 69 cm³, injection pressure: 2,400 bar, overall weight: 3,300 kg, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: % prior to delivery Manufacturer: Engel Type: VICTORY 200/45 Tech + er/usp Condition: aus laufender Produktion Operating hours: ca. 81.700 CLAMPING UNIT: - Clamping force: 45 t Öffnungsweg: 355 mm Mould installation height min.: 175 mm Mould installation height max.: - Tie bar distance (h x v): holmlos Plate dimension (h x v): 550 x 430 mm Centering (fix- movingplate): / mm INJECTION UNIT: IU200 Screw diameter: 25 mm Injection weight in polystyrol: 63 g Stroke volume: 69 cm³ Einspritzdruck: 2.400 bar CONTROL: CC Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: - Hot runner control devices: - Robot interface: Angußpicker er/usp Other equipment: Nadelverschl. Hydr., Schnittstelle Dosier- und Temperiergerät GENERAL DATA: - Installed heating capacity: 6,8 kW Pump drive power: 11 kW Redpjrbqtnofx Abpjcf Total installed power: Motor + Heizung Total weight: 3.300 kg Total size L x B x H: 3,3 x 1,2 x 2,2 m

Condition: used, Year of construction: 2020, operating hours: 5,400 h, clamping force: 400 kN, displacement volume: 475 cm³, injection pressure: 1,650 bar, overall weight: 24,500 kg, screw conveyor diameter: 55 mm, Freight basis: ex-site Rsdpfx Abov S H Rhspecf Delivery time: by arrangement Payment terms: 100% before taking delivery of the machine, net