Used Injection Molding Machine Vertical for sale (66,890)

Condition: good (used), Year of construction: 2001, screw diameter: 30 mm, clearance between the columns: 420 mm, injection pressure: 1,995 bar, injection weight: 96 g, mold height (min.): 200 mm, General information: Lredpfx Aezt Ivdoi Hsr Year of manufacture: 2001 Control system: NC4 Weight: 3950 kg Dimensions (length × width × height): 4.2 × 1.4 × 2.0 m Injection unit: Type: … / 200 Screw diameter: 30 mm Screw L/D ratio: 20 Specific injection pressure: 1995 bar Injection volume: 106 cm³ Injection shot weight: 94 g Clamping unit: Type: 60 / … Clamping force: 60 t Platen dimensions: 600 × 600 mm Distance between tie bars: 420 × 420 mm Mold height: 200 mm Opening stroke: 550 mm Maximum platen distance: 750 mm

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2100mm, weight: approx. 3500kg, operating hours: 44117h. Documentation available. On-site inspection is possible. Lrsdpoyddy Usfx Ai Hjr

Condition: used, Year of construction: 2015, Lot consists of: (1) Injection molding machine, Handling: Sepro Robotique | SR SUCCESS11 S3 Trans | 2014 Temperature control: HB Therm | Miscellaneous: 1x Protective Enclosure 1x Handling system 1x Conveyor belt Technical Details: Max. stroke (mm): 175.0 Measuring system: Incremental encoder Clamping system: Toggle (KH) Clamp force (kN): 1000 Injection servo: No Screw diameter (mm): 40.0 Screw speed (rpm): 420 Heating zones: 4 Lrjdpfx Aoy N R N Uei Hsr Heating power zone 1 (kW): 4.23 Heating power zone 2 (kW): 3.00 Heating power zone 3 (kW): 3.00 Heating power zone 4 (kW): 3.00 Temperature control: J-type thermocouple Pressure sensor type: Diaphragm

Condition: used, Injection molding machine ARBURG, Type Allrounder 320 C 600-100 Serial No. 189356, Year of manufacture 09/2002 Clamping force 60 tons Screw diameter 25 mm Dosing volume max. 49 cm3 Injection pressure max. 1570 bar Opening stroke - platen stroke max. 350 mm Platen dimensions 446 x 446 mm Tie bar spacing 320 x 320 mm Mold height min.: 200 mm Platen spacing min.: 200 mm Platen spacing max.: 550 mm Centering of fixed and moving platens 125 mm Heater power 4.9 kW Motor power hydraulic pump 15 kW Lredpfjzqglrsx Ai Hsr Mains connection 400 Volt, 50 Hz, 19.9 kW - Machine control SELOGICA - Two controllable hydraulic circuits for core pullers - Injection unit with COLORTRONIC material hopper for automated granule feed - U-version interface - HHG interface - Control ARBURG MULTRONICA with foil keypad and integrated display - 88790 operating hours recorded (power-on hours) - 44925 operating hours of the hydraulic pump (hydraulic on) - Control cabinet fixed to the machine - Work area protective doors at the front and rear, manually sliding with safety switches - Mobile control panel with function keys, mounted on the back of the machine Space requirement L x W 3650 x 1700 mm Height with material hopper 2200 mm Weight 3000 kg Good condition

Condition: excellent (used), Year of construction: 2011, Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, rotary table and additional automation. Year of manufacture: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - touch screen Additional equipment: Production line with robot, rotary table and additional automation Vertical injection molding machine Air valves Injection for mold parting Automatic adjustment of the injection unit setting (up - down) The rotary table is driven by a servo motor controlled by an inverter - very precise Automatic part feeding with quality control system Machine workstation protection with safety package Dimensions: Weight: 350 kg Length/width/height: 0.70x1.00x1.65 m Lrsdpfxszc I Uaj Ai Hor All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 1300kN, Opening stroke: 500mm, min. installation height: 250mm, Platen distance: 750mm, Tie bar spacing X/Y: 420mm/420mm, Platen dimensions X/Y: 605mm/605mm, max. mold weight: 650kg, Ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1650mm/2100mm, Weight: approx. 4300kg, Operating hours: approx. 80131h. The machine is defective and no longer functional or operational. Can only be used as a spare parts carrier. Documentation available. An on-site inspection is possible. Ledpfx Aijyddzfe Hsrr

Condition: excellent (used), Year of construction: 2007, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, injection pressure: 1,865 bar, injection weight: 192 g, mold height (min.): 200 mm, ejector stroke: 100 mm, Year of manufacture: 2007 Injection shot weight: 192g Injection unit 410 Screw diameter: 40 mm Specific injection pressure: 1865 bar Injection volume: 217 ccm Injection shot weight: 192 g Screw L/D ratio: 20 Mold closing unit 100 Mold plate dimensions: 600x600 mm Distance between columns: 420x420 mm Ejector force: 35 kN Mold height: 200 mm Lsdpjzt I Rnofx Ai Hsrr Ejector stroke: 100 mm Weight: 5000 kg Control system: NC4 Tooling: - 2 x hydraulic core - pneumatic valve - Euromap 67 connector

Condition: excellent (used), Year of construction: 2011, ENGEL DUO 5550/650 pico injection molding machine ENGEL robot Control system: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Technical data Clamping unit Clamping force: 6500 kN (650 tons) Distance between columns (H × V): 1100 × 960 mm Platen dimensions (H × V): 1510 × 1440 mm Mold height (min./max.): 650 / 1150 mm Mold opening stroke: 1400 mm Maximum distance between platens: 2050 mm Maximum mold weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Column diameter: 175 mm Injection unit Screw diameter: 90 mm Maximum injection volume: 2740 cm³ Maximum injection weight (PS): 2520 g Maximum injection pressure: 2180 bar Standard injection pressure: 1910 bar Screw L/D ratio: 20:1 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plastication rate: 77 g/s Lrsdpfx Aijywrtwe Hsr Nozzle clamping force: 150 kN Drive and power supply Drive power: 90 kW Cylinder heater power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1000 l Hydraulic equipment 6 hydraulic circuits on the moving platen 2 hydraulic circuits on the stationary platen 4 cascade valves on the stationary platen ENGEL robot ENGEL linear robot Integrated with the machine control system Designed for automatic part removal Robot control from the CC200 system Synchronization of robot operation with the injection molding machine cycle

Condition: excellent (used), Year of construction: 2015, KRAUSS-MAFFEI KM 900-8100 GX injection molding machine Lredpfxjzvm T Te Ai Hjr Year of manufacture: 2015 Clamping force: 9000 kN / 900 t Control system: MC6 Closing system: hydraulic-mechanical, two-platen Injection unit: 8100 Design and control Hydraulic-mechanical two-platen closing system with 4 pressure cushions on the stationary platen and 4 adjusting units on the moving platen. PV – injection unit adjustment. MC6 control system, based on an industrial computer with real-time Ethernet technology, equipped with an integrated 19-inch control panel with a color touchscreen, LED backlighting, and ProcessDesigner process visualization. Plasticizing unit Complete plasticizing unit for thermoplastics, featuring abrasion protection. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Closing unit Mold clamping force: 9000 kN / 900 t Mold opening force – pressure cushions: 630 kN Dimensions of mounting plates (H × V): 1660 × 1530 mm Distance between columns (H × V): 1180 × 1000 mm Maximum mold opening stroke: 1600 mm Mold height min./max.: 500–1100 mm Maximum distance between platens: 2100 mm Ejector stroke: 300 mm Ejector force front / rear: 140 / 70 kN Injection unit 8100 Screw diameter: 105 mm Ls/D ratio: 23:1 Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight for PS: 3228 g Injection rate: 805 cm³/s Screw speed: 150 rpm Nozzle clamping force: 166 kN Electrical and hydraulic equipment Rated power of pump motor: 120 kW Installed power of heaters: 59 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 3.3 s / 826 mm Dry cycle time / stroke according to KraussMaffei standards: 2.9 s / 590 mm Oil tank capacity: 1450 l Dimensions and weight Machine dimensions (L × W × H): 10.72 × 3.03 × 2.51 m Net weight including control cabinet: 40 t

Condition: excellent (used), Year of construction: 2014, KRAUSS-MAFFEI KM 420-4300 CX injection molding machine Year of manufacture: 2014 Control system: MC6 Plasticizing unit: 4300 Screw diameter: 90 mm Control system MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Integrated 19-inch control panel with a color touchscreen, LED backlight, and visualization of all running processes via ProcessDesigner. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion-resistant design. Lsdpszvmx Nsfx Ai Horr Screw diameter: 90 mm Backflow valve: yes Nozzle: open Nozzle radius: 15 mm Nozzle orifice: 6 mm Clamping unit Clamping force: 4200 kN / 420 t Maximum mold opening force: 250 kN Dimensions of mounting plates (H × V): 1270 × 1230 mm Distance between columns (H × V): 800 × 800 mm Maximum mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum distance between plates: 1400 mm Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Standard injection rate: 604 cm³/s Injection rate with accumulator: 1909 cm³/s Standard screw speed: 195 rpm PS plasticizing rate at standard speed: 134 g/s PS plasticizing rate at increased speed: 186 g/s Nozzle clamping force: 129 kN Electrical and hydraulic system Rated power of pump motor: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 560 mm Oil tank capacity: 1000 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.5 × 2.4 m Net weight including control cabinet: 25.5 t

Condition: excellent (used), Year of construction: 2013, KRAUSS-MAFFEI KM 550-4300 GX injection molding machine Year of manufacture: 2013 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 4300 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system with a color TFT monitor, integrated control panel, and USB data storage. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 90 mm Backflow valve: yes Nozzle: open Clamping unit Clamping force: 5500 kN / 550 t Mold opening force – pressure pads: 385 kN Platen dimensions (H × V): 1430 × 1350 mm Distance between columns (H × V): 1040 × 910 mm Maximum mold opening stroke: 1350 mm Minimum/maximum mold height: 400–950 mm Maximum distance between platens: 1750 mm Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20:1 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Injection rate: 636 cm³/s Screw speed: 195 rpm Nozzle clamping force: 129 kN Electrical and hydraulic equipment Rated motor power: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 728 mm Dry cycle time / stroke according to KraussMaffei standards: 2.5 s / 520 mm Oil tank capacity: 1180 l Dimensions and weight Lsdpozvm Dlofx Ai Herr Machine dimensions (L × W × H): 8.08 × 2.80 × 2.39 m Net weight with control cabinet: 25.0 t

Condition: excellent (used), Year of construction: 2013, KRAUSS-MAFFEI KM 850-8100 MX injection molding machine – with servo drive Year of manufacture: 2013 Lredpfx Aozvm A Isi Hor Control system: MC5 Clamping system: hydraulic-mechanical, two-platen Drive: hydraulic with servo drive Design and control Hydraulic-mechanical, two-platen clamping system with 4 pressure cushions and 4 adjusting units mounted on the moving platen. PV – injection unit adjustment. MC5 PC (Pentium) control system with a color TFT monitor, integrated control panel, and USB data storage. Plasticizing unit Complete plasticizing unit for thermoplastics with wear-resistant coating. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Clamping unit Clamping force: 8500 kN / 850 t Opening force: 560 kN Mold mounting plate dimensions (H × V): 1600 × 1600 mm Distance between tie bars (H × V): 1140 × 1140 mm Mold opening stroke: 1600 mm Minimum/maximum mold height: 500–1100 mm Maximum distance between platens: 2100 mm Ejector stroke: 300 mm Ejector force, front/rear: 200 / 100 kN Injection unit 8100 Screw diameter: 105 mm Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight for PS: 4137 g Injection rate: 805 cm³/s Screw speed, standard / optional: 121 / 153 rpm Electro-hydraulic equipment Servo drive for the hydraulic system: YES Rated power of the pump motor: 110 kW Number of dry cycles according to EUROMAP 6: 965 cycles/h Oil tank capacity: 1500 l Dimensions and weight Machine dimensions (L × W × H): 10.81 × 2.92 × 2.57 m Net weight with control cabinet: 43.5 t

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Lrodpfx Aioyab Nfs Her

Condition: excellent (used), Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Arburg Multilift H Side Robot Year of Manufacture: 2013 Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Lrjdpfxszc N Smo Ai Hor Injection pressure: 1,650 bar Dosage volume: 474 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping mechanism: toggle lever Control system: SELOGICA – touchscreen Additional Equipment: Hybrid machine: high-speed, energy-efficient and very quiet Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Hot runner control x 12 Injection unit hardened – bimetallic Main machine motor – servo motor driven by frequency inverter – for energy savings Injection unit driven by a servo motor controlled by an inverter Machine equipped with cylinder/battery with compressed nitrogen (additional charge for fast operation) Centralized lubrication Automatic mold height adjustment Kistler sensor – mold pressure control The injection molding machine was operated in a so-called “cleaning room”, equipped with additional protective devices against contamination as well as two vapor absorbers Side robot Arburg Multilift H Year of manufacture: 2013 5-axis robot: Z-axis servo-driven (electric); X-, Y- and B-axis (rotation) pneumatically operated Robot safety package Robot with adapter, conveyor belt with electric height adjustment, safety enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 6,680 kg Length/width/height: 5.03x1.56x2.21 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2018, KRAUSS-MAFFEI KM 900-8100 GX injection molding machine Year of manufacture: 2018 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 8100 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Integrated 19-inch control panel with a color touchscreen, LED backlighting, and visualization of all running ProcessDesigner processes. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Nozzle radius: 25 mm Nozzle opening: 9 mm Clamping unit Clamping force: 9000 kN / 900 t Mold opening force: 630 kN Platen dimensions (H × V): 1660 × 1530 mm Distance between columns (H × V): 1180 × 1000 mm Standard maximum distance / opening width: 2100 mm Ejector stroke: 300 mm Ejector force front / rear: 140 / 70 kN Injection unit 8100 Screw diameter: 105 mm Ls/D ratio: 23:1 Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight: 3228 g* Injection speed: 90 mm/s Injection rate: 779 cm³/s Standard screw speed: 150 rpm Plasticizing rate at standard speed: 135 g/s* Nozzle pressure force: 166 kN * according to the manufacturer's specifications / reference material provided. Electrical and hydraulic equipment Rated motor power: 120 kW Installed heater power: 59 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 3.3 s / 826 mm Ledpfx Ajzvm E Asi Hsrr Dry cycle time / stroke according to KraussMaffei standards: 2.9 s / 590 mm Required hydraulic oil quantity: 1450 l Dimensions and weight Machine dimensions (L × W × H): 10.72 × 3.03 × 2.51 m Net weight including control cabinet: 40.0 t

Condition: good (used), Year of construction: 1998, Screw diameter: 25 mm Clamping force: 25 tons Lredpfx Aievxh Iuo Hor Opening stroke: 350 mm Weight: 2,900 kg Immediately available from stock

Condition: used, Year of construction: 2022, Lot consists of: (1) Injection molding machine, temperature control: HB Therm | Miscellaneous: 1x conveyor unit by Motan Technical Details: Power supply: AC400V 3P/N/PE Frequency (Hz): 50 Current (A): 228 Installed power (kW): 137 Motor power (kW): 63.5 Heating power (kW): 33 Short-circuit rating (kA): 25 Screw diameter (mm): 65 Injection unit: 2230 Machine weight (t): 22.0 Lredpfx Asy N R Htsi Hjr

Condition: excellent (used), Year of construction: 2013, Krauss Maffei KM 1600–17200 MX Blu Power Injection Molding Machine Year of manufacture: 2013 General description Lrsdpfx Aiezrgfho Hor Modern injection molding machine equipped with a fully hydraulic clamping unit. The machine features an advanced MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Operation is performed via an integrated, 19-inch control panel with a color touchscreen, LED backlighting, and graphical visualization of all active processes (ProcessDesigner module). Plasticizing unit Complete unit for processing thermoplastic materials Screw diameter: 135 mm Version with wear-resistant (abrasion-resistant) protection Check valve Open nozzle Technical data Clamping unit Clamping force: 16,000 kN Opening force: 1,120 kN Dimensions of clamping plates (width × height): 2550 × 2100 mm Distance between columns (width × height): 1870 × 1420 mm Opening stroke: 2700 mm Mold height (min.–max.): 700–1600 mm Maximum daylight: 3400 mm Ejector stroke: 350 mm Ejector force (forward / backward): 300 / 150 kN Injection unit Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1784 bar Injection volume: 9662 cm³ Injection weight for PE: 6860 g Screw speed (nominal / maximum): 81 / 100 rpm Electrical and hydraulic equipment Main motor power: 160 kW Installed heater power: 93 kW Number of heating zones: 7 Number of dry cycles according to EUROMAP 6: 648 cycles/h Oil tank capacity: 2400 l Dimensions and weight Net weight (with control cabinet): 92 t Machine dimensions (length × width × height): 14.17 × 4.04 × 2.93 m

Condition: excellent (used), Year of construction: 2005, Battenfeld HM 270/1330 Injection Molding Machine Basic Information Manufacturer: Battenfeld Model: HM 270/1330 Year of Manufacture: 2005 Category: Hydraulic Injection Molding Machine Clamping Unit Clamping Force: 2,700 kN (270 tons) Mold Platen Dimensions (horizontal × vertical): 1030 × 1020 mm Distance Between Columns (horizontal × vertical): 710 × 630 mm Lrsdpfjzc Efcex Ai Her Minimum Mold Height: 350 mm Maximum Mold Opening: 1150 mm Injection Unit Screw Diameter: 55 mm Injection Volume: 650 cm³ Injection Shot Weight: 565 g Maximum Injection Pressure: 2040 bar Dimensions and Weight Net weight of the machine, including the control cabinet: approximately 12 tons

Year of construction: 2009, condition: ready for operation (used), Two injection molding machines are offered, year of manufacture 2008 and 2009. Clamping force: 500kN, tie bar spacing X/Y: 320mm/320mm, mold mounting plates X/Y: 446mm/446mm, opening stroke: 350mm, max. platen distance: 550mm, injection unit 170: screw diameter: 25mm-30mm, shot volume: approx. 59ccm/25mm screw, approx. 85ccm/30mm screw, shot weight: approx. 62g to 77g, injection pressure: up to 2500bar. Inspection is possible by arrangement. Lsdpfxox I Rqce Ai Hjrr

Condition: excellent (used), Year of construction: 2015, KRAUSS MAFFEI KM 1300-12000 MX injection molding machine Year of manufacture: 2015 Equipment: Krauss Maffei LRX 350 linear robot Clamping unit Clamping force: 13,000 kN (1300 tons) Hydraulic-mechanical two-platen clamping system 4 pressure pads 4 adjustment units on the moving platen Fully hydraulic clamping system Technical data Mounting plate dimensions: 2210 × 1910 mm Distance between columns: 1570 × 1270 mm Mold opening stroke: 2350 mm Maximum platen opening: 3050 mm Minimum mold height: 700 mm Maximum mold height: 1400 mm Ejector stroke: 350 mm Ejector force: 250 / 125 kN Injection unit Complete plasticizing unit for thermoplastics, designed in an abrasion-resistant version. Technical data Screw diameter: 105 mm Injection pressure: 2296 bar Injection volume: 5195 cm³ Injection shot weight (PS): 3689 g Maximum injection speed with accumulator: 150 mm/s Injection rate with accumulator: 1299 cm³/s Maximum screw speed: 144 rpm Plasticizing rate (PS): 130 g/s Control system The machine is equipped with a modern Krauss Maffei MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Equipment includes: 19-inch color touchscreen ProcessDesigner process visualization Full machine diagnostics Lodozqdibspfx Ai Hsrr Advanced process parameter setting functions PV injection unit adjustment Electrical and hydraulic equipment Pump motor power: 132 kW Heater power: 75 kW Number of heating zones: 7 Oil tank capacity: 2440 liters Dimensions and weight Length: 13.65 m Width: 3.65 m Height: 2.82 m Machine weight: 70 tons KRAUSS MAFFEI LRX 350 linear robot The machine is equipped with a Krauss Maffei LRX 350 linear robot, designed for automatic part removal. Robot parameters Payload: up to 35 kg Part removal on the side opposite the operator Range of motion X-axis (removal from the mold) 1200 mm servo drive Y-axis (vertical) 1000 / 1000 mm (telescopic) servo drive Z-axis (transverse) 3500 mm servo drive C-axis rotation 0–90° pneumatic drive torque 60 Nm In addition: absolute positioning measurement system.

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Lrjdpfjzt I Srsx Ai Hsr Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 50 - 100 AX injection molding machine Electric injection molding machine Ljdpfx Aov Hxgqoi Hjrr Year of production - 2011 Working hours 47799 Operator language: German, Romanian, Czech Closing unit - Mold closing force: kN 500 - Mold opening force: kN 39.9 - Dimensions of the mounting plate (hxv): mm 510 X 460 - Distance between columns (hxv): mm 410 X 360 Injection unit - Screw diameter: mm 25 - Injection pressure: bar 2025 - Injection volume: cm3 49 - Injection weight for PS: g 45 Dimensions and weight - Net weight with control cabinet: t 3.9 - Machine dimensions (length x width x height): m 4.13 x 1.6 x 1.8

Condition: excellent (used), Year of construction: 2017, WITTMANN BATTENFELD Macro Power 900/8800 injection molding machine Year of manufacture: 2017 Serial number: 138337-100 Machine with Wittmann robot Clamping unit • Clamping force: 9,000 kN / 900 t • Opening force: 300 kN • Maximum opening stroke: 2,100 mm • Minimum mold height: 500 mm • Maximum mold height: 1,000 mm • Maximum distance between platens: 3,100 mm (with max. mold height of 1,000 mm) • Dimensions of mounting platens: 1,720 × 1,550 mm • Distance between columns: 1,200 × 1,000 mm • Ejector stroke: 300 mm • Ejector force: 165 kN Injection unit 8800 • Screw diameter: 105 mm • Screw pitch: 525 mm • L/D ratio: 22:1 • Theoretical injection volume: 4,545 cm³ • Maximum injection pressure: 1,931 bar • Maximum screw speed: 167 rpm • Maximum plasticizing rate: 151 g/s • Screw torque: 8,000 Nm • Maximum volumetric flow rate: 725 cm³/s • Injection flow rate with dual pump – option: 906 cm³/s Ljdezvwirjpfx Ai Hjrr • Nozzle stroke: 950 mm • Nozzle clamping force: 129 kN • Cylinder heating capacity: 53.9 kW • Number of cylinder heating zones: 7 Hydraulic system / drive • Pump power: 90 kW • Oil tank capacity: 1,100 l • Heating power: 53.9 kW Dimensions and weight • Machine length: 10,100 mm • Machine width: 3,400 mm • Machine height: 2,700 mm • Machine weight: 35,200 kg / 35.2 t

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 161729, clamping force: 1,000 kN, screw diameter: 40 mm, injection weight: 158 g, ejector force: 40,000 N, total length: 4,225 mm, total width: 1,370 mm, total height: 1,200 mm, overall weight: 3,080 kg, heating capacity: 5.5 kW (7.48 HP), pump power: 18,500 W, power: 24.3 kW (33.04 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, input current: 96 A, Equipment: documentation/manual, We are offering this used Arburg 370M 1000-250 injection moulding machine, year of manufacture 1994. Serial number: 161729 Lrjdpfx Asyrczgsi Hor Year: 1994 Operating voltage: 380 V 3~ 50 Hz Control voltage (230 V): 220 V ~ 50 Hz Control circuit voltage: 24 V = Total rated current: 96.00 A Total connected load: 55.0 kW Drive upgraded to xD card! If you have any questions or require further information, please feel free to send us a message or give us a call.