Used Ink Unit Temperature Control for sale (61,728)

Year of construction: 2011, condition: used, Temperature control unit, heating, hot water boiler, hydronic system, hydraulic station for high pressure cleaner, high pressure pump -Temperature control units for: water -electric heating for: pressure washer, high pressure pump Psdpfxsqw D Dps Aahsrc -Manufacturer: Frigotrol -Type: S-TT 50/108-D -Power: 110 kW -Connection: -permissible operating pressure: 6 bar -Dimensions: 1548/890/H1630 mm -Weight: 380 kg

Condition: used, Used temperature control unit Item number: 10636 Predpfouuacfox Aahjc Make Tool-Temp Up to 90°C Total height 720mm Overall length 730mm Total width 300mm

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) Prsdpfjg Ewwrox Aahoc -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Year of construction: 2015, condition: reconditioned (used), New price 2015- 15200€ GWK cooling tower Predpfx Aedxlntjahjc Proven completely overhauled by GWK DGUV certificate available

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: 2TM00006306, The standard STM units reach a maximum temperature of 200°C/392°F, the STM-HT units reach a maximum temperature of 300°C/572°F. PID controller with a 4.3-inch LCD display with a user-friendly interface. Weekly timer with °C/°F unit conversion. Uses a digital multi-stage PID controller for a stable mold temperature with an accuracy of ±0.5°C/0.9°F. SSR solid-state relay. The standard STM units are equipped with an efficient high-temperature pump. The STM-HT units feature a magnetic pump. Stainless steel housing for high-pressure explosion protection without leakage. Multiple safety and warning devices, e.g., phase failure, pump overload, pump overheat protection, and low oil level alarm. Stainless steel heater. Psdpev Unycefx Aahsrc Equipped as standard with a flow indicator and pump reversing function for oil return. RS485 interface for centralized adjustment and monitoring. Standard buzzer.

Condition: used, Year of construction: 2007, Temperature controller, temperature control unit, temperature control unit, modular temperature control unit -Manufacturer: GWK, temperature control device temperature control device -Type: teco wd 100.09.15 -Heating power: 9 kW -Nominal cooling capacity: 100 kW -Techn. Data: see photo type plate -Number: 3x temperature control unit available -Price per piece -Dimensions: 1190/320/H745 mm Predpfx Asiyzn Dsahoc -Weight: 85 kg/pc.

Condition: used, Year of construction: 2014, functionality: fully functional, The temperature control unit is for sale; new price of the unit 7135€ Heating cable : 18 KW , heaters are new Water temperature : 160 degrees Prodpfx Aetzbx Ieahsc Device on wheels Cooling capacity : 36KW

Year of construction: 1999, condition: used, Temperature controller, temperature control device, temperature control device, modular temperature control device -Manufacturer: GWK, temperature control device -Type: teco 1000 -Heating power: 15 kW -Rated cooling capacity: 100 kW Prsdpfoqmt Acox Aahec -Techn. Data: see photo of nameplate -Dimensions: 1190/320/H750 mm -Weight: 99 kg

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 185 kg, The oil temperature control unit is new and available immediately Medium: Oil Prjdpfxerazg Uj Aahsc Temperature : 300 degrees Indirect cooling : I2 Heating capacity : 12 KW Weight : 123 KG

Year of construction: 1998, condition: used, Temperature controller, temperature control unit, temperature control unit, modular temperature control unit Pedjiyzn Iepfx Aahsrc -Manufacturer: GWK, temperature control device temperature control device teco wi -Type: teco 1000 -Heating power: 18 kW -Nominal cooling capacity: 100 kW -Techn. Data: see photo type plate -Dimensions: 1190/320/H745 mm -Weight: 102 kg

Year of construction: 2019, condition: refurbished (used), functionality: fully functional, The temperature control unit from Technotrans is for sale; Medium : Oil Operating temperature: 130 degrees Heating capacity: 6KW Pedpfx Aer A Eppsahsrc Cooling capacity: 29KW via plate heat exchanger and solenoid valve More information on request by mail

Condition: ready for operation (used), The Deltatherm temperature control device is for sale, of course with the device's operating instructions. All spare parts are still available from the manufacturer. Quantity: 1 piece/ price per device Medium: oil Heating output: 18KW Max. temperature: 200 degrees Pump flow rate: 100l/min Discharge pressure: 3bar Dimensions, W: 400mm D: 765mm H: 1310mm Podpfx Aaoiw H Ubjherc Weight: 150KG

Year of construction: 2015, condition: excellent (used), The temperature control unit is for sale ;2015- the new price was 4995€ Medium : Water Functions - Function for self-optimizing temperature control - Function and fault displays - User-dependent and password-protected rights - Limit comparator (tolerance band monitoring of the actual value with alarm message) - Adjustable setpoint limit - Weekly timer - Automatic heating and cooling program - Freely selectable ramp function for temperature changes during heating and cooling - VNC server via Ethernet (enables complete operation and management from the PC) - 2nd temperature setpoint - Tool management (setpoints and control parameters can be be saved as a recipe) - Measured value recording for quality assurance (actual values can be be output to SD card with time stamp) Podpjm Dtm Aofx Aahsrc - Electronic level monitoring with dry run protection - Automatic filling and replenishment with leakage and level function monitoring level function monitoring - Automatic venting Monitoring/safety - Short-circuit-proof controller and control outputs - Temperature sensor in circulating medium flow and return - Safety temperature limiter to prevent overheating and Safety valves against overpressure - Contactless heating control with solid state relay - Safety temperature reduction when switching off - Acoustic and visual warning signal with symbol and text text on the touch screen- Symmetrical mains load with three-phase drive and three-phase heating elements three-phase current heating rods - 3-fold safety shutdown of the heater - Reversible circuit breakers and motor protection switch - Dirt trap in the cooling water supply Hydraulics - Continuous cooling via motor valve

Condition: used, functionality: fully functional, There are several Tool-Temp controllers for sale Podpfsv E Uirsx Aaherc

Year of construction: 2014, condition: good (used), functionality: fully functional, The temperature control unit has been tested by the manufacturer for its function and is for sale; invoice with purchase! Communication between PC and device possible. New: depends on the equipment, approx. 5500€ Temperature range max. 160 degrees Medium water Lids are removable Prsdpfxjuau Dao Aahec Device on castors Speck immersion pump Heating capacity : 9KW Cooling capacity : 40KW Tank volume: 12 liters and much more .....

Condition: good (used), Label printer, barcode printer, printer, logistics labeling system, inkjet printer, thermal inkjet printer, control unit for inkjet printer -Manufacturer: REA, control unit for inkjet printers -Type: JET HR 2K G2 .: 054.12.000 -Voltage: 95V-240V / 50-60 Hz Prodpfoxnxl Sex Aahjc -Dimensions: 350/310/H295 mm -Weight: 10 kg

Year of construction: 2025, condition: new, We are manufacturer of temperature control unit (Thermoregulator), so we are able to produce every capacity devices you need. Technical data: Brand: Churchill ISI-TAN Model: CH220x2 Prjdpfx Aashby Irshoc Heating Capacity: 20kW (with oil) Operation Range: 300C (oil) Pump: 90x2 l/min,8bar, 1,5kW (German brand) Power Consumption: 21,5 kW Voltage: 400/50Hz, 3phases Delivery cost is not included

Year of construction: 2018, condition: as good as new (ex-display), Frigel Water Temperature Control Units, like new, 400 V, 32 A, up to 90 degree Podpfei Tx Dnox Aahorc

Year of construction: 2015, condition: excellent (used), The device is for sale: Psdpfsncdwyex Aaherc They have not been used much and are fully functional Please refer to the type plate for technical details, there is of course a complete operating manual for the device

Condition: used, Year of construction: 2014, functionality: fully functional, load capacity: 360 kg, arm reach: 2,655 mm, controller manufacturer: Fanuc, controller model: R-30iB, teach pendant manufacturer: Fanuc, Fanuc Corporation Robot with Controller, Panel & Cables, M 900iB 360, R 30iB Model: M900iB360 Type: R30iB Condition: Used General Information: FANUC industrial robot complete system Fully functional Tested Including control cabinet, teach pendant, cable set/hose package, and safety feature Remote Mode Select (RMS). Year of manufacture: 2014 Robot Arm Model: M-900iB/360 Type: A05B-1335-B201 Year: 2014 Payload: 360 kg Reach: 2,655 mm Axes: 6 Weight: 1,540 kg Teach Pendant Type: A05B-2255-C101#ESW Year: 2014 Control Cabinet Model: R-30iB Type: A05B-2613-B050 Year: 2014 Weight: 200 kg Electrical Data Podpfx Aajxpu Rmehsrc Voltage: 380-415/440-500V AC Frequency: 50/60Hz Power: 15kVA Phases: 3 Cables / Hose Pack RM1 motor power cable 4005-T111 L=7.5 RM2 motor power cable 4005-T112 L=7.5 RP1 encoder/feedback cable 2007-T299 L=7.5 Teach pendant cable LEONI Dress Pack SPR+MH; A1-3; Art. No. C04285-00-056 including control, signal, motor, and pneumatic lines and cables LEONI Dress Pack SPR+MH; A3-6; Art. No. C04285-02-044H2 including control, signal, motor, and pneumatic lines and cables Accessories: Declaration of incorporation EC Declaration of Conformity

Condition: excellent (used), Description Professional device for measuring axial runout, concentricity, and straightness of rotating parts Measuring range up to approximately 235 mm between centers Precise Kafer dial indicator 0.01 mm, Made in Germany Stable cast iron base with a guideway Two spindles with centers, similar to a lathe, for holding cylindrical components Bed lock and adjustable measuring arm Very good condition Equipment ready for immediate use Psdew Rd A Njpfx Aahorc Ideal for inspecting shafts, bushings, hubs, pins, and other precision components Set includes: Device with centers Kafer dial indicator 0.01 mm Holder with arm Centers and knobs Equipment for quality control in a toolroom or measurement department

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 01.1821241101.0001.12, power: 11 kW (14.96 HP), input voltage: 400 V, overall weight: 476 kg, total length: 1,200 mm, total width: 800 mm, total height: 1,850 mm, SEW-Eurodrive bevel gear motor including controller/converter. Included in the offer: Podstk Rq Aopfx Aaherc - K97 DRE160MC4BE20HR/TF bevel gear motor - Control cabinet SEW-Eurodrive frequency inverter MDX61B0150-503-4-OT with MDX60A0150-503-4-00 SEW BW018-035 braking resistor with BST075-400V-00 braking module. Safety PLC from Pilz. (See type plates for further details.) The system is connected via Profinet. Packaging and loading included.

Condition: excellent (used), Fagor 8055 set Prjdsxrtc Tspfx Aahoc

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: DR047-13 / 10015861, Complete resin dryer system for injection moulding production. The system has been used sparingly and is in good condition. The system consists of multiple components that can also be sold separately, as follows: 1 resin dryer Moretto VTH 31 V, SN 1906041 / 2019 2 resin dryers Plastic Systems, SN DR047-13 / 10015861 / 2013, capacity 370 kg each Dwjbk Rkjwx E Nbjm Eceb 23 resin silos with the following capacities: - 54 kg * 4 pcs - 105 kg * 6 pcs - 113 kg * 2 pcs - 75 kg * 2 pcs - 56 kg * 4 pcs - 22 kg * 2 pcs - 140 kg * 1 pc - 210 kg * 1 pc - 420 kg * 1 pc Distribution pipelines. Stainless steel pipes and fittings available. Do not hesitate to contact us for a personalised price quote. Prjdpfowx E Nbex Aahjc

Condition: ready for operation (used), Fanuc A06B-6050-H203 Velocity Control Unit, serial no. according to photo, used, professionally completely overhauled and tested with 6 months warranty, 100% functional, scope of delivery according to photos Prodpfxsi D Uwks Aahjc