Used Inserter for sale (2,017)

Condition: used, Year of construction: 2008, Working hours machine: 120266 h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC-F Working range laser: 2500 x 1525 mm Working range punching: 3050 x 1875 mm Length: 6354 mm Width: 5880 mm Height: 2517 mm Machine weight: 30000 kg Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min simultanes (x and y): 128 m / min Standard configuration - Patented servo-electric double drive- Punching force 300 kN - low energy consumption of the punching unit (maximum 7 kW, 1 kW in stand-by mode) - smooth-running, low-noise, low-wear and almost maintenance-free   - 780 punching strokes per minute - Optimum use of sheet metal Bjdpfsz R Ri Ijx Afieww - Punch & Forming for forming up to 20 mm in height - Multiple thread unit with four inserts from M 2.5 to M 6 - brush table for scratch-free processing Extended machine accessories - Z-revolver with 45 turrets (2 x B Station Auto Index / 2 x C Station Auto Index)- punch & forming- tapping Automation - does not include the loading unit shown in the picture

Condition: used, maximum load weight: 13,609 kg, overall weight: 16,000 kg, first registration: 01/2018, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,470 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2018, Container No. G0123022 - Manufacturer: Kögel. * Sliding roof tarp * Double corner brackets * Insert strip (wood) * Outline marking, side/rear * Load certificate Code-XL Bjdpjz N Rc Dofx Afisww * Multi-hole strip * Portal door with double swivel rod locks (inside) * Side sliding tarp * Forklift accessible * Fixed support legs * Device for rail loading * Lashing points * Perforated pallet stop strip Used roof tarp. Financing available upon request. Financing possible. Delivery time: IMMEDIATELY. Multi-lock outer frame. Used tarp. Technically ready for use without further repairs. Substructure with signs of wear. Valid UVV certification. UVV documentation available. Swappable container with markings (see photos). LASI CODE XL!!! Dimensions are approximate. Offer subject to change; we reserve the right to sell in the meantime. Prices are net, ex works D-59302 Oelde. Further details available upon request by telephone or email.

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 94,201 h, control type: CNC control, bending force (max.): 400 t, installation height: 595 mm, Bending length [mm] 3550 Pressing force [tons] 400 Control system Cybelec ModEva 10s Standard equipment: - Sturdy machine frame as a welded construction in all-steel design - Press beam with high bending strength - Electro-hydraulic upper drive via proportional valves - Modern block hydraulics - CNC rear stop for X and R axes, safe displacement of the stop fingers from the front by means of a safety interlock - Upper tool clamping system "EHT", manual, head width 26mm, load max. 3000 kN/m - Lower tool clamping system EHT, manual, clamping width 90mm for block tools and 13mm for single V-dies, without clamping - Control system: CYBELEC ModEva 10S on Windows, 2D graphic control with a 10.4" color screen - Control cabinet air conditioning + Rear stop - System 1, 5 axes, straight finger, 140mm wide, adjustment of R axis 150mm + EHT quick clamping device, for upper tools, pneumatic, head width 26mm, load max. 3000 kN/m (self-centering horizontally) Bodpfx Aoz Rmcvofijww + EHT lower tool clamping, pneumatic, clamping width 55mm + Hardened insert strip, for EHT lower tool clamping 55mm / 90mm + Lower tool displacement, CNC-controlled, infinitely adjustable via rear stop 1 (max. 4550 mm working length) + Crowning device CNC-controlled, in the table without tool clamping, load max. 3000 kN/m + Safety device LaserSafe (up to max. upper tool height 440mm) + Additional foot switch + Bending aid 1st arm, load max. 1500N with 2 integrated support strips in standard design + Bending aid 2nd arm, load max. 1500N with 2 integrated support strips in standard design + 2 pcs. support strips for a bending aid with T-slot 14mm and scale and ball rollers + 2 pcs. table extension for bending aid + Short park position left + Short park position right

Condition: like new (used), Year of construction: 2024, functionality: fully functional, In operation from 09/2024 to 03/2025. Infeed package lengths: 2.00m to 4.50m. Shortest length of finished packages: approx. 0.60m. Length accuracy: +/- 1mm. Capacity: approx. 350 m3 per shift. Bjdpfxe Adryro Afisww Consisting of: Infeed roller conveyor, 4.5m long, 1.3m wide Mosca KOV-111-16 strapping machine with timber insert Buffer chain conveyor, 4.2m Variocut package capping system with 15kW saw motor Cart system, 4m long, with chain conveyors at the infeed and outfeed Extension of outfeed chain conveyor: 3.2m Control system

Condition: used, empty load weight: 6,460 kg, axle configuration: 3 axles, first registration: 02/2018, next inspection (TÜV): 09/2027, tire size: 445-45 R19.5-445-45 R19.5, Year of construction: 2017, mileage: 6,94,648 km, ref: F0801128 Equipment: * Air connection: Red/Yellow connector, Bodpfx Afj Ad Rploijww * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Side impact protection, * Lifting odometer, * Toolbox: 1, * Spare wheel holder: 1, * Rear door design: Rear portal doors, * Locking rods on rear doors: 4, * Sliding cover, * Side sliding tarpaulin, * Lifting roof, * Multilock, * Floor: Plywood floor, * Insertion strip (aluminum): 32 VIN: WKESD00000801128 Tire size: 445-45 R19.5 Internal length: 13.62 m Width: 2.55 m Internal width: 2.48 m Height: 4.09 m Internal height: 3 m

Condition: used, empty load weight: 6,460 kg, axle configuration: 3 axles, first registration: 02/2018, next inspection (TÜV): 01/2027, tire size: 445-45 R19.5-445-45 R19.5, Year of construction: 2017, mileage: 7,11,924 km, Ref: F0801127 Equipment: * Air connection: Red/yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Side impact protection, * Lifting odometer, * Tool box: 1, * Spare wheel holder: 1, * Rear door design: Rear portal doors, * Locking bars on rear doors: 4, Bjdpfxe Ad Rpre Afijww * Sliding tarp, * Side sliding tarp, * Lifting roof, * Multilock, * Floor: Plywood floor, * Insertion strip (aluminum): 32 VIN: WKESD00000801127 Tire size: 445-45 R19.5 Internal length: 13.62m Width: 2.55m Internal width: 2.48m Height: 4.09m Internal height: 3m

Condition: good (used), Year of construction: 2010, machine/vehicle number: 427, Offer 26350 Technical data: - Insertion height up to 120 mm - Adjustment range of the punching heads from 23.5 to 63.5 mm - Max. profile thickness (aluminum) 3 mm - Max. working stroke 350 mm - Max. punching stroke 12 mm - Working pressure 7 bar - Air consumption per working cycle approx. 9 l - Includes: - Foot pedal - 2 vertical, pneumatic clamping devices - Recessible counter bearing - Adjustable punching heads - 2 pivoting support arms Bwedpfx Afo Adz Nijisw - Space requirement approx. W 850 x H 1250 x D 800 mm - Weight approx. 350 kg

Condition: used, Weiss Type: WT-1300/70/15 Weiss temperature testing chamber, water-cooled with touch panel control Data for temperature tests: Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1340 liters Temperature change rate: Heating: 15 K/min Cooling: 10 K/min Bwedpfx Afoza Dv Ioiow Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature homogeneity spatially: ± 0.5 to ± 2 K Test chamber dimensions: Height: 920 mm, Width: 1100 mm, Depth: 1330 mm External dimensions: Height: approx. 2050 mm, Width: approx. 1300 mm, Depth: approx. 3200 mm Permissible test item weight: Total load on the test chamber floor: 150 kg Load per insert shelf: 50 kg Data according to the nameplate: Manufacturer: Weiss Umwelttechnik GmbH Type: WT-1300/70/15 Data for operation: Rated voltage: 3/N/PE AC 400 V ±10% 50 Hz Rated current: 63 A Rated power: 44 kW Refrigerant: R404A: 14.0 kg R23: 5.4 kg Maximum permissible pressures: R404A LP max.: 18 bar R404A HP max.: 25 bar R23 LP max.: 19 bar R23 HP max.: 25 bar Standby pressure: 18.5 bar Equipment: Touch panel control Stainless steel test chamber Multiple insertion levels Side access Heated door seal Water-cooled refrigeration unit CEE connector CE marking available Weight: approx. 1500 kg For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Condition: used Scope of delivery: (See image) Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: good (used), Code: 0383 Brand: DUE B.ERRE STEMA - ITALY Model: SPINAMATIC GLF HP - CE Standard Machine for applying thick glue and dowels with pneumatic gun for panels, for doors, windows and various - CE Standard Technical data Max insertion capacity 60 dowels per minute Dowel diameter mm 10/12 mm Dowel length mm 25 to 50 mm Max insertion depth 30 mm Machine works with one diameter of dowels at a time Electronic dosing of glue quantity Washing system Flexible arm provided with counterweight that makes the gun lighter during the work cycle (gun weight approx 3 kg) Recommended adhesive type: Water-based emulsion adhesive - Viscosity Brookfield 580 mPa.s - Solids content 30% - Min film formation temperature 3–5 °C - Cleaning with water Wheels on base Voltage 220 V single-phase Max pressure 6 atm Overall dimensions mm 600 x 1000 x 2100 h Weight kg 130 Bwedpfey N Uq Aex Afiow

Condition: good (used), Creasing and folding machine Heidelberg Stahlfolder + Popp Maschinenbau SRT + MWS Machine in very good condition, ready for production. Like new. Year of production 2012. It was used in the production of invitations, photo book inserts and leaflets. Modular design allows for expansion, e.g. installation of marking printers. Technical data: Paper format min 105 x 150 mm Paper format max 520 x 720 mm Feeding from a high stack Main and cross module with the possibility of installing creasing, perforating and cutting tools. Possibility of installing Heidelberg or Techni-Fold tools, Smooth speed regulation Bwedpez Dfr Ijfx Afiow Becker compressor Double sheet sensor Electronic counter with packaging Set of inspection cameras.

Condition: good (used), functionality: fully functional, Internal article number: 26051 HSK-A63 Turning tools Sandvik CoroTurn TR 3x base holders HSK-A63 C4-390.410-63 080C + Insert Coroturn 107 / 5513 020-01 / 5680 049-01 / C4-SDJCL-27050-11 + Insert Coroturn 107 / 5513 020-01 / 5680 049-01 / C4-SDJCL-27050-11 + Insert CoroTurn TR-C4-D13 NCN-00050 5680 049-01 / 5513 020-01 Bwodpfoz Ha Icex Afijw + Insert C4-SRDCN-00050-08A 5513 020-04 / 5680 051-03 + Insert Sandvik C4-LF 151.23-27060-30 + Insert Sandvik C4-SRDN-00050-08A + Various indexable inserts

Condition: like new (used), functionality: fully functional, mileage: 3,18,300 km, first registration: 12/2022, fuel type: diesel, tire size: 315/70 R 22.5, axle configuration: 4x2, wheelbase: 4,000 mm, fuel: diesel, color: white, driver cabin: sleeper cab, emission class: euro6e, number of beds: 2, Year of construction: 2022, Equipment: ABS, EBS, air conditioning, airbag, blind spot assist, central locking, cruise control, differential lock, electronic stability program (ESP), fridge, full service history, lane keeping assist, navigation system, non-smoking vehicle, parking air conditioner, parking heater, power assisted steering, retarder, seat heater, tire pressure monitoring, traction control, Unique company-owned DAF vehicle, always serviced exclusively by an official DAF workshop, with complete and certified invoices and documentation. PROMOTIONAL PRICE WITH OFFICIAL DAF FIRST CHOICE WARRANTY INCLUDED FOR 1 YEAR. Bwsdpfszzzddox Afijw EQUIPMENT: FULL AERODYNAMIC KIT, SUN VISOR, DUAL FUEL TANKS, PTO PREPARATION (POWER TAKE-OFF), PARKING AIR CONDITIONING, SIDE SKIRTS, RETARDER, FRIDGE, DOUBLE SLEEPER CAB. WHEELS PAINTED BLACK AND CUSTOMIZED FRONT PARTS PAINTED WHITE. REGULARLY PERFORMED MAINTENANCE, CERTIFIED AND GUARANTEED MILEAGE. Leasing and/or financing options available up to 60 installments with the best rates on the market. Optional official DAF warranty on the chassis and/or total FIRST CHOICE warranty up to 2 years. Confidential negotiation, wide availability of units for immediate delivery in various colors, configurations, and engine options. The description may contain characteristics that differ from the actual ones; these should be verified on-site. In any case, this datasheet does not constitute a contractual commitment. For more information and clarification, please call the numbers provided, also via direct WhatsApp. Paolo Antonio Gorgoni The photo album is taken on-site at our facilities; the photos are therefore real and represent the current condition of the vehicle. Please note that the system automatically inserts the equipment and accessories, so discrepancies may sometimes occur. Therefore, to ensure greater accuracy, we invite you to always verify them through direct contact with us.

Condition: new, Year of construction: 2026, The WLT-T Transport Trolley with Pneumatic Wheels and a load capacity of 200 kg is designed for lifting and moving loads in warehouses, workshops, and production facilities. It combines a mast structure with load forks and a compact chassis, facilitating material handling at workstations. The 250 mm diameter pneumatic wheels help absorb vibrations during movement, improving comfort when manually manoeuvring the trolley. Key Advantages of the WLT-T 200 kg Transport Trolley - Rated load capacity of 200 kg – enables the handling of components, crates, and equipment during transport and assembly operations. - Large Ø250 mm pneumatic wheels – help absorb vibrations generated during movement and make the trolley easier to manoeuvre. - 535 mm long forks – provide stable support for loads during lifting and transportation. - Lowered fork height of 65 mm – makes it easier to pick up loads with limited ground clearance. Bjdpfez Sy T Rex Afijww - Overall width of 540 mm – facilitates manoeuvring around workstations and reduces the space required for storing the trolley. - Lifting and transportation in one device – helps reduce the need to manually carry heavy components between successive stages of work. Mast Structure and Load Handling Forks The WLT-T lifting trolley features a vertical mast that guides the fork assembly, allowing the load support height to be adjusted. The design combines lifting functionality with a mobile chassis, making the trolley suitable for both delivering materials and positioning them at workstations. Two handles provide the operator with a comfortable grip when manually moving and positioning the trolley. 535 mm Long Forks with a Maximum Spacing of 515 mm The forks consist of two separate support elements for the transported load. Their length of 535 mm and maximum spacing of 515 mm allow the trolley to handle loads with dimensions suited to the available support surface. The open design makes it easier to monitor the position of the forks when approaching a load and aligning it with the workstation. Low Fork Height in the Lowered Position The initial fork height of 65 mm makes it easier to slide the forks beneath items positioned close to the floor. This is particularly useful when handling crates with feet, components mounted on supports, and equipment with sufficient clearance for fork insertion. The low support height simplifies load positioning before lifting and further transportation. Pneumatic Wheels – Improved Manoeuvring Comfort The transport trolley with pneumatic wheels uses the flexibility of its tyres to reduce vibrations transmitted from the floor to the chassis. Large wheels with a diameter of 250 mm facilitate smooth movement over hard surfaces, which is particularly important during frequent transportation between workstations. Equipment and Structural Components - Mast structure with a lifting fork assembly. - Load forks with a length of 535 mm. - Large pneumatic wheels with a diameter of 250 mm. - Small front wheels with a diameter of 50 mm. - Handles for manually manoeuvring the trolley. Technical Specifications of the WLT-T Transport Trolley Rated load capacity 200 kg Maximum fork spacing 515 mm Fork length 535 mm Fork height in lowered position 65 mm Overall length 860 mm Overall width 540 mm Overall height 1210 mm Large wheel diameter 250 mm Small wheel diameter 50 mm Weight 48 kg

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, overall weight: 560 kg, total length: 1,870 mm, total width: 1,040 mm, total height: 1,550 mm, compressed air connection: 6 bar, positioning accuracy: 0.01 mm, repeat accuracy: 0.01 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality standards and guarantee the depaneling machine a long service life and high reliability. Made in Germany Semiautomatic depaneling - solutions on demand The LOW 4322 depanelling system enables fast product changeover while maintaining short depanelling and handling times. The insertion of the blank PCB is done with a parallel shuttle, pick-up and fixation with pin clamping technology and if necessary in combination with vacuum suction cups. This machine is equipped with: • a shank and disc tool separating module on Z-axis (automatically rotatable 0-90) • X-Y cross stitch module in linear motor technology with high resolution measuring system • 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors • Alu profil frame with two maintenance doors - left and right. • Standard vision system base module for teach-in programming (camera area 400 x 330 mm) • Working area is 420 x 330 mm • Automatic cutter length processing (only in combination with shank separation module) • Remote maintenance/support via remote connection (TeamViewer) or provided by the customer • Touch IPC with Windows operating system • Laser axis measurement incl. protocol • air ionization • Cutter breakage control for end mills only • Preparation for vacuum clamping technology • ESD window and sliding doors Bwsdpjznr Slsfx Afisw Optionally a vacuum cleaner unit can be offered later.

Condition: used, Year of construction: 2002, 2002 Friulmac DUALFEED Cutter - Loader for hydraulic, automatic shearer, with electronic size adjustment. The Dualfeed machine consists of two heads connected by a welded steel frame, on which two support shafts for pallets are fixed. One of the support pallets is fixed while the other is movable to allow opening of the head placed on the action of the hydraulic fluid and centraining On the pallets they find space at the entrance, the parts warehouse for automatic loading handling hydraulics. pieces to be machined, then the workpiece feed system, the work groups and the press group, finally at the output, the hauling group assigned to the entry of pieces to the scorniciatrice. The purpose of the machine is to continuously feed the chipping machine with pieces cut to the required size of the woodworking material, as specified in the technical specification. The operating cycle takes place in two distinct phases: - in the first phase the piece is automatically retrieved from the warehouse where the operator previously performed the loading operation and the transit is passed through two sawing blades that cut it to the adjusted length. - In the second phase the piece header is always automatically moved to the pre-feeder of the scorner where two dedicated feed rollers insert it into the - just shearer. The loading speed automatically adjusts to the pull speed of the palm framer and the machine operation stops automatically if for any reason the palm framer's pull stops. The piece advancement is performed by pushers mounted on a movable bar that has an alternating (forward-backward) movement. At the end of the work cycle the piece exits the machine with the same pusher system and is deposited on the stripper conveyor bed where two feed rollers insert it into the stripping machine. Bedpjzxg Ddofx Afisww The alternating motion of the mobile bar that carries the pushers is hydraulically obtained from a rotary actuator and the two traction rollers are driven by a hydraulic motor. Minimum piece length: mm. 260 Maximum piece length: mm. 1300 Minimum piece width: mm. 40 Maximum piece width: mm. 110 Minimum thickness: mm. 10 Maximum thickness: mm. 80

Condition: used, Year of construction: 1993, Used Machine Year of manufacture: 1993 Features and technical specifications: - Machine bed cast entirely from gray iron in a single piece - With wide table supports and dovetail guides for the vertical slide - With control panel above the table - Interchangeable spindle with MK 5, 30 mm diameter - Milling spindle swivel angle: 45°/22.5° - 2 motors: 5.5/7.5 kW – 400 V - 4 speeds without belt change: 3000–4500–6000–9000 rpm - Cast-iron table with table top extensions on both sides, 2150 mm - Solid cast-iron milling stop with quick adjustment (overall) and individual adjustment for both jaws Bjdpozyy Dtjfx Afisww - ELGO 89P23 control unit for height, tilt, and stop - Program memory for 99 programs - With sliding table insert - With Maka 4-roller feed unit - Dimensions L x W x H approx. 2150 x 1430 x 1740 mm - Weight approx. 1450 kg

Condition: used, Weiss Technik Salt spray chamber / corrosion test cabinet Weiss Technik SaltEvent SC 1000 Corrosion test equipment / salt spray test chamber For sale is a used Weiss Technik SaltEvent SC 1000 salt spray chamber. The device is suitable for corrosion tests, salt spray tests, material testing, surface testing, quality assurance, as well as research and development. Technical data Manufacturer: Weiss Technik GmbH Type: SaltEvent SC 1000 Device type: Salt spray chamber / corrosion test equipment Year of manufacture: 2019 Test chamber size: Size 1000 liters Rated voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Customer-side fuse: 16 A slow-blow Weight: approx. 370 kg Overall dimensions according to layout drawing: approx. 2910 × 900 × 960 mm Max. test chamber load: 150 kg Floor grid load: 150 kg Insertion rods: 8 kg per rod Shelf for machine part covers: 5 kg Temperature range salt spray test: Ambient temperature +5 K to +50 °C Temperature range condensation test: Ambient temperature +5 K to +42 °C Temperature compressed air humidifier: Ambient temperature +5 K to +70 °C Temperature stability over time: ±1 K Bwjdpezg Er Aofx Afiew Salt solution consumption during salt spray test: approx. 0.5 to 1.5 l/h Equipment S!MPAC control system WEBSeason / color control panel Touch operating panel Test chamber hood Storage tank Control cabinet Floor grid / test chamber grid Compressed air humidifier Hood locking Temperature monitoring Interface Documentation as shown in the pictures Connections / media supply Power connection: 230 V / 50 Hz Compressed air connection available Connection for demineralized water available Exhaust connection available Water drain / condensate drain available Application areas Salt spray test Corrosion test Condensation test Material testing Surface testing Coating testing Automotive Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of supply 1x Weiss Technik SaltEvent SC 1000 salt spray chamber Storage tank Accessories as shown in the pictures Documentation as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Inspection possible by appointment. Loading with a forklift is available. Shipping or freight forwarding is possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, ESPEC Temperature Shock Chamber ESPEC TSA-72EL-A Temperature Shock Chamber Water-cooled For sale is a used ESPEC temperature shock chamber, model TSA-72EL-A from the manufacturer ESPEC CORP. This chamber is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, automotive applications, quality assurance, and research and development. Technical Data Manufacturer: ESPEC CORP. Model: TSA-72EL-A Type of equipment: Temperature Shock Chamber System: 2-zone testing with damper switching Design: Air-cooled Test chamber volume: approx. 72 liters Internal dimensions of test chamber (W × H × D): 410 × 460 × 370 mm External dimensions (W × H × D): 1310 × 1900 × 1470 mm Weight: approx. 900 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -65 °C to 0 °C Temperature stability: ±0.5 °C Preheating temperature: up to +205 °C Pre-cooling temperature: up to -75 °C Heating time: from ambient temperature to +200 °C within approx. 15 minutes Cooling time: from ambient temperature to -70 °C within approx. 40 minutes Temperature recovery condition: +125 °C / 30 min. to -40 °C / 30 min. Temperature recovery time: within approx. 5 minutes Max. test chamber load: 30 kg evenly distributed Cable entry: Ø approx. 50 mm Compressed air supply: 0.4 to 0.7 MPa / 4 to 7 bar Refrigerant, high-temperature side: R404A Refrigerant, low-temperature side: R23 Power supply: AC 400 V / 3 phases / 50 Hz Max. current consumption: 45 A Features Color touchscreen control TFT color LCD, 10.4 inches PID temperature control Program memory Trend graphics Alarm history Eco mode Automatic defrost RS-485 interface Over-temperature / under-temperature protection Vertical sliding door Stainless steel test chamber Mechanical cascade refrigeration system Electronic expansion valve Sirocco circulating air fan Damper drive via air cylinder 2 stainless steel test inserts Cable entry, Ø approx. 50 mm Application areas Temperature shock testing Temperature cycling testing Electronics testing Semiconductor testing Automotive Component testing Material testing Quality assurance Research and development Condition Used Optical condition as shown in the images Scope of delivery 1x ESPEC TSA-72EL-A Temperature Shock Chamber 2x Stainless steel test inserts Accessories as shown in the images Important note: Bwedszhkfqspfx Afisw For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Inspection possible by appointment. Forklift available for loading. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Weiss   Type: WT11-1000/70/5   Weiss temperature chamber, air-cooled, with Weiss condenser cooler   Test chamber volume approx. 990 liters   Data for temperature tests:   Temperature range -70°C to +180°C   Temporal temperature deviation in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature gradient (according to IEC 60068-3-5) 1 to 4 K   Temperature change rate (according to IEC 60068-3-5) Heating 5 K/min Cooling 5 K/min   Heat compensation max. 2750 W   Feedthrough installed as standard R1: NW 125 mm L1: NW 50 m   Dimensions:   Test chamber dimensions: Width 1100 mm x Depth 950 mm x Height 950 mm Housing dimensions: Width 1390 mm x Depth 1525 mm x Height 1995 mm   Maximum load (evenly distributed over the area) of the test chamber floor 150 kg per insert grid 50 kg Total load of the grid supports 100 kg   Data for operation:   Test chamber lighting: Halogen bulb 24V, 50W   Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 27.0 kW Rated current 42.02 A Heat dissipation water-cooled test cabinets max. heat dissipation to the environment 1.3 kW   Noise measurement: Sound pressure level approx. 64 dB(A)   Refrigerant: (converted to R-452a)   Weight: approx. 960 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data and information are subject to change!)   Bwodpjzfy Rwofx Afijw We will gladly answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 2003, machine/vehicle number: 694/0-302 (2003), functionality: fully functional, operating hours: 2,580 h, power: 12 kW (16.32 HP), workpiece height (max.): 48 mm, workpiece width (max.): 60 mm, edge thickness (max.): 15 mm, height adjustment type: electric, feed rate X-axis: 11 m/min, overall weight: 2,000 kg, Equipment: documentation/manual, Holzher Sprint 1417, year of manufacture 2003 - Only 160,000 linear meters run, very good condition - - Can also be operated separately without Ligmatech - - Ideal for high-quality furniture production, HPL and matte decors are no problem - Machine completely controlled by PLC, almost everything can be adjusted on the control panel, no defects, well-maintained machine used with expertise. Leuco Z3 jointing cutter installed, 2nd set of cutters available, various indexable inserts available. Board thickness max. approx. 48 mm, edge banding from 0.3-15 mm possible. Chain conveyor renewed approximately 10 years ago. Spray system for release and cleaning agents, controlled by demand. - Jointing fence motor-controlled and programmable. - Jointing cutters 1961, 2 x 2.0 kW - Glue system cartridge 1906, with sensing nozzle (important), cartridge magazine for 4 cartridges, color change easily possible, PU also possible. - Pressure unit 1903 MOT, pressure of the 1st and other rollers can be adjusted separately. - Miter saws 1918, bevel cuts adjustable. - Flush trimming 1823 - Radius trimming 1942 MOT (one axis motor-adjustable for 1 and 2 mm edges, selectable on the control panel) - Profile trimming blade 2 mm 1929 pneumatically controlled. - Corner copying unit 1983 carbide-tipped, with adjustment on the control panel, functional, but needs to be fine-tuned again. Bwjdpfxsz Dxh No Afijw - Flat trimming blade 1964 - Oscillating unit controlled by demand. Includes all operating manuals, documentation of the process steps digitally and in printed form by Holzher technicians. One set of DIA jointing cutters is included, as well as various indexable inserts for the cutting units. Return conveyor system ZHR 15 Boomerang, year of manufacture 1995. Mounted on the machine with coupling to the pressure bridge. Easily adjustable from the control panel, with rotating device for components. Adjusted to the feed rate, sensors still available from HOMAG. - Information without guarantee, the parties agree that the sale of the used machine takes place with complete exclusion of any warranty, guarantee and liability for defects. The buyer has inspected and tested the machine before purchase. - Sale only to commercial businesses, machine currently powered and in operation. Price negotiable. Machine available after clarification in December / January 2027. Crane loading or forklift loading also possible from an external warehouse.

Condition: used, Year of construction: 1998, machine/vehicle number: 845, functionality: fully functional, pressing force: 106 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,700 mm, table height: 650 mm, total length: 1,965 mm, total width: 2,645 mm, total height: 3,992 mm, overall weight: 12,500 kg, Equipment: documentation/manual, Hydraulic 4-column stamping press – 106 T – 1,700 × 1,200 mm For sale is a hydraulic 4-column stamping press from the manufacturer ALN with a maximum pressing force of 106 T. The machine has a table size of 1,700 × 1,200 mm, an open height of 1,450 mm, and a stroke of 1,000 mm, making it suitable for stamping, forming, straightening, inserting, and assembly work in industrial applications. ##### Technical data + information: Hydraulic 4-column stamping press – 106 T – 1,700 × 1,200 mm ==== General information - Reference ID: TPT-09 - Manufacturer: ALN - Type: Hydraulic 4-column stamping press - Model: 4 SPY 60 SO - Machine number: 845 - Year of construction: 1998 - Pressing force: 106 T - Table size (usable area): 1,700 × 1,200 mm - Table height: 650 mm - Open height: 1,450 mm - Stroke: 1,000 mm - Overall height: 3,992 mm - Overall width: 2,645 mm - Overall depth: 1,965 mm - Total weight: 12.5 T - Basement required: no ==== Hydraulic cylinder - Max. working pressure: 243 bar - Return speed downwards: 250 mm/s - Return speed upwards: 280 mm/s - Initial pressing speed: 17.5 mm/s ==== Hydraulics & drive - Main motor: 25 kW - Oil tank: 650 l ==== Safety and equipment - Slug damping: yes - Maintenance platform: no ==== Documentation - Hydraulic diagram - Electrical diagram - Operating manual ##### Bwsdpj Ad H S Aefx Afijw Application areas: Stamping, forming, straightening, inserting, assembly work, toolmaking, mold making, metalworking, mechanical engineering, contract manufacturing, series production (Hydraulic 4-column stamping press, 4-column stamping press, hydraulic press, ALN press, 4 SPY 60 SO, 106 T press, 106-ton press, forming press, stamping press, straightening press, inserting press, assembly press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our great strength lies in the design and manufacture of custom machines and press automation. We distribute tailor-made hydraulic presses at surprisingly competitive prices. For the hydraulics of the presses, we mainly use components from leading European manufacturers.

Year of construction: 2016, condition: good (used), functionality: fully functional, machine/vehicle number: 45129, FISA Ultrasonic Mold Cleaning System 3 VST 1200/P-INSON+Z1, Year of Construction 2016 Manufacturer: FISA Ultraschall GmbH / FISA Manufacturing Srl Type: Special 3 VST 1200/P-INSON+Z1 Year of Construction: 2016 Serial Number: 45129 Internal dimensions of the tanks: approx. 1,600 × 600 × 1,250 mm Maximum mold weight: 2,200 kg Description Offered is an industrial FISA ultrasonic cleaning system for cleaning and maintaining large injection molds, die-casting molds, and other molds, as well as heavy components. The system consists of three stations arranged one behind the other for ultrasonic cleaning, cold rinsing, drying, and preservation. The design is intended for workpieces or molds with a weight of up to 2,200 kg. The VST 1200 cleaning station is designed as a noise-insulated INSON version. It features a pneumatically operated hinged cover, automatic water supply, safety float switch, vapor extraction with fans, and an adjustable timer. The ultrasonic generation is provided by two FISA USM 28/R generators and four MAGNASONIC transducers FB 550 PLAN. A cold rinsing station VST 1200 and a drying and preservation station VST 1200/P with Option D are connected to the cleaning station. The preservation station also has a pneumatically operated hinged cover, a vapor extraction system, and a sight glass for liquid level control. Above the preservation tank, there is a drip and blow-off station with side doors, a splash guard, an extraction system, and a flexible hose for blowing out the cleaned molds. Scope of supply Bwodpozx Eftsfx Afiow - Cleaning station VST 1200 - Cold rinsing station VST 1200 - Drying and preservation station VST 1200/P - Two ultrasonic generators USM 28/R - Four MAGNASONIC transducers FB 550 PLAN - Pneumatically operated hinged covers - Vapor extraction system including fans - Drip and blow-off station - Stainless steel drip tray under the entire system - Two special mold support bars for a total load of 2.2 tons - Immersion rack VST 350 INOX with two inserts - Optical alarm indicator - Remaining runtime display - Weekly timer - Walkway with stairs and safety railing - Control cabinet and operating unit - Existing technical documentation Technical data - Usable internal dimensions: approx. 1,600 × 600 × 1,250 mm - Maximum workpiece load: 2,200 kg - Number of process stations: three - Sound power level according to the measurement report: 78 dB(A) - Design: Stainless steel - CE declaration of conformity available - Initial acceptance and instruction in 2016 documented - Drip tray: approx. 6,500 × 1,800 mm - Installation area including walkway and operating area according to drawing Condition Used industrial system. The system is shown fully assembled and connected in the pictures. A successful handover and instruction were documented in 2016. The current operating condition, the tightness of the tanks, the performance of the ultrasonic generators, and the function of the heating, pumps, pneumatics, extraction system, and control system should be checked again before sale or during an inspection. Inspection and functional testing possible by arrangement. Sale in the existing condition and scope of supply according to the illustrations and documentation. Dismantling, loading, and transport must be coordinated in advance due to the size and weight.

Condition: good (used), Year of construction: 2007, Ref. no.: 18597 Manufacturer: ENGEL Type: insert 200 H/70 CC 200 Year of construction: 2007 Clamping unit Bsdpfsy Au I Uex Afioww Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products. Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results. The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production. The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production. The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition. The ENGEL INSERT series is particularly suitable for: * insert molding applications * metal/plastic combination parts * electronic component production * connector and cable technology * technical plastic parts * precision industrial products With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.

Condition: used, ISO 40 collets, various clamping devices, cutting inserts two cabinets Bedpfx Ao Ahq I Aofijww

Condition: used, Year of construction: 1996, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, RILECART PB796 Calendar and Wire-bound Book Binding Machine Binding Size: 600 x 700 mm Fully automatic calendar punching and binding line. Automatic calendar hanger insertion. Max Punching Thickness per Stroke: 4,5 mm (depending on pitch, material and width), Standard Binding Dia: 1/4" & 5/16", Standard pitch 3:1", Variable speed: 500 to 2300 pieces/hour, depending on size, thickness and quality of materials. Complete with exit conveyor. Mechanical Condition: Very Good Bwsdpfxsz E S I Sj Afiew Power requirements: 400 V, 3-phase. External air supply required. Delivery and installation service available. (POA)