Used Material testing for sale (506)

Year of construction: 2016, Condition: as good as new (ex-display), Functionality: fully functional, drop height: 2,000 mm, ZwickRoell Z010 Tensile & Compression Testing Machine Dqo02J Manufacturer: ZwickRoell Model: Z010 Category: Measuring & Testing Equipment / Material Testing Machine Type: Universal Testing Machine (Tensile & Compression) Condition: As good as new (ex-display), Year: 2016, Operating Hours: 0 This ZwickRoell Z010 Universal Testing Machine is ideal for precise tensile, compression, and material testing. Known for its exceptional reliability and accuracy, it is suitable for various industries including metals, plastics, composites, and textiles. Fully functional and ready for immediate use. Perfect for R&D laboratories, quality control, and production testing.

Condition: used, Vötsch Temperature cycle chamber, VT 7012 S2 Model: VT7012S2 Xaeew9Ya Technical Data: Temperaturschocktestkammer400V AC / 3/N/PE50Hz25A10kW+50 °C bis +220 °C/-80 °C bis +70 °C General: Two-chamber design: The temperature control of the hot chamber ranges from +50 °C to +220 °C (optionally up to +250 °C), that of the cold chamber from -80 °C to +70 °C.Test chamber volume 125 lTemperature range hot chamber +50 °C to +220 °CTemperature range cold chamber -80 °C to +70 °C Test chamber dimensions: Width 470 mmDepth 650 mmHeight 410 mm External dimensions: Width 970 mmDepth 2350 mmHeight 1985 mm Test weight, maximum load 50 kgSound pressure level 56 db(A)Water-cooled refrigeration unit Electrical connection 3/N/PE AC 400 V ± 10 % Frequency 50 Hz Rated power 10 kW Regulation and control: Controller board with removable color panel

Condition: used, Leco Type: CS-200 / Model 617-000-300 Carbon / Sulfur Analyzer Carbon analysis C-determination in composite materials C+S-determination in iron and steel alloys. Method of analysis Carbon / sulphur analyzer Abbreviation C-/S- Analyzer Device type and equipment Leco CS 200 Operating principle Sample is burned in an oxygen stream. Measurement of CO₂ and SO₂ in the flue gas by infrared measuring cell. Typical applications C determination in composite materials C+S determination in iron and steel alloys. Detection limit C: 0.002 % S: 0.01 % Requirements for sample 1g solid ( finely divided ) Metals, organic materials Accreditation / Certification ISO9001 CS analysis system for inorganic solids with a very wide range of applications - Robust universal design for use "on site" as well as in high-tech laboratories - C/S measurements from 1-2 ppm to 100 % (depending on sample weight) - Control via DSP controller and/or Leco Windows software - Fully automatic oven cleaning with dust trap cleaning (Leco exclusive!) - High-frequency combustion at 2300 °C - Analysis time of approx. 40 seconds - (optional) autoloader for 20 positions with fast loading device and other automation options Display accuracy without PC carbon and sulphur 0.1 ppm, with PC carbon and sulphur 15 computer positions, analysis time 45 s, Sample weight 1 g, measuring method infrared absorption, semiconductor technology, carbon is measured from CO2, required chemicals chemicals required: anhydrons, Lecosorb, planitized silica gel and cellulose, with computer Installation dimensions approx. (LxWxH) 1800x800x800 mm Weight approx. 150 kg Condition: used Cvjbymjfja Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: refurbished (used), Small load hardness tester 323 from Zwick Small load hardness tester used and refurbished. Ckhcqopkkd Conventional Vickers hardness tester with integrated camera for load levels: HV 0.3 - 0.5 - 1 - 2 - 3 - 5 - 10 The individual load levels are set by placing the weight discs. Condition : used, overhauled, warranty included Painting : RAL 9001 (cream white) This device is supplemented by our video measuring system with integrated camera. Through the digital evaluation you get a fully documentable measuring system.

Condition: excellent (used), Universal Mechanical Hardness Tester. Dqnk7H

Condition: good (used), machine/vehicle number: 1180202, (1) Cabin with hardness tester, With (1) control unit including cabinet and drawer cabinet Dqksyt

Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: XE-3-HS, Q-Sun Xenon Test Chamber Model Xe-3 made in (Q-LAB) The Q-SUN Xe-3 is a high-performance environmental tester designed for indoor use. It features advanced water spray capabilities and efficient heat management. Key Specifications: Electrical Configuration: 208V, 230V, or 400V ± 10% (Three Phase) Refer to the serial number nameplate for voltage configuration details. Current Ratings: H/HS/HBS/HDS: 39A 208V/230V, 26A 400V HC/HSC/HDSC: 44A 208V/230V, 26A 400V Frequency: 50 or 60 Hz Water Requirements: Purity: Reverse osmosis/deionized (RO/DI) water with Type I Anion Resin is required for effective silica removal and to prevent specimen spotting. Room Environment: Temperature: 70°F to 80°F (21°C to 30°C) Ventilation: Releases 6,600W heat (22,520 BTU/hr) and exhausts 13.2 pounds (6.0 liters) of water vapor per hour. Pressure: Minimum 30 psi during spray steps. Daily Volume: Based on a spray cycle with 7 seconds on and 53 seconds off. Dqoxnt Dimensions: Without Casters: 91 x 178 x 99 cm (36" x 70" x 39") With Casters: 91 x 183 x 99 cm (36" x 72" x 39") #Q-SUNXe-3#EnvironmentalTester #WaterSpraySystem #RO/DI Water# IAnionResin#SilicaRemoval #HeatManagement, #IndoorTestingEquipment

Condition: good (used), Hardness tester WOLPERT Testor - HT 1E Brinell: 250 kg Rockwell: 150 kg Projection: 125 mm Dqkti2 Workpiece height - max.: 200 mm Machine weight approx.: 70 kg Space requirement approx.: 400 x 200 x 700 mm Test load: 62.5 / 100 / 150 / 187.5 / 250 kg. Brinell Dto. 100 and 150

Condition: used, White Type: WT11-1000/40 Weiss temperature chamber air-cooled Test chamber capacity approx. 990 liters Data for temperature tests: Temperature range -70°C to +180°C Temperature deviation in time in the center of the chamber ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature gradient (according to IEC 60068-3-5) 1 to 4 K Temperature change rate (according to IEC 60068-3-5) Heating 4 K/min Cooling 2.5 K/min Heat compensation max. 2750 W Cthfh7Ttfq Feedthrough built into basic equipment R1: NW 125 mm L1: NW 50 m Dimensions: Test chamber dimensions: Width 1100 mm x depth 950 mm x height 950 mm Housing dimensions: Width 1390 mm x depth 1525 mm x height 1995 mm Maximum load (evenly distributed over the surface) of the test chamber floor 150 kg 50 kg per shelf Total load of the grate supports 100 kg Data for operation: Test room lighting Halogen bulb 24V, 50W Nominal voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 13.8 kW Nominal current 29 A Noise measurement: Sound pressure level approx. 64 dB(A) Refrigerant: R-404A R 23 Weight: approx. 910 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2013, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: WKS 3-800/40/15, Weiss climatic test chamber WKS 3-800/40/15 -42 to +180°C and humidity, with temperature change rate of 15 K/min, external cooling, in excellent condition, well maintained and serviced. In addition, the entire test unit is calibrated and certified accordingly. Product advantages: - Calibrated test stand (DAkkS calibration method A) - Rapid temperature changes (15 K/min) - Climate change - Usable volume 800 l - Interfaces for functional tests during the test cycle Data for temperature tests: Temperature range: -42°C to +180°C Temperature change rate cooling 18.0 K/min Temperature change rate heating 16.0 K/min Temperature deviation, temporal ± 0.3 to ± 0.5 K Temperature homogeneity, spatial ± 0.5 to ± 2.0 K Heat compensation at +20°C 8000 W Thermal compensation at -20°C 3000 W Data for climatic tests Temperature range: +10 to +95 °C Humidity range: 10 to 98 % r.h. Humidity deviation in time ± 1 to ± 3 Heat compensation max 500 W Temperature deviation in time ± 0.2 to ± 0.3 K Temperature homogeneity in space: ± 0.5 to ± 1 K Permissible test material weight: Dpfjlr Total load test chamber floor 150 kg, insert grid 50 kg Insert grid 4 pieces Total load of insert grid 100 kg Test chamber dimensions: Height 925 mm, width 1100 mm, depth 800 mm External dimensions: Height 2000 mm, width 1415 mm, depth 2810 mm Test chamber capacity: 800 liters Feed-throughs: 1x 140mm ∅ / 1x 100mm ∅ / 1x 90mm ∅ 1x 50mm ∅ 2x 80mm ∅ Data for operation: Rated voltage: 3/N/PE AC 400V ± 10% 50Hz Rated current: 70 A Rated power 36.0 kW Refrigerant: R-404A Weight: 1500 kg

Condition: good (used), Stock number: 2938 Manufacturer: Wolpert Year of manufacture: 1960 Type: Testor HAT 1E Test method: Rockwell 150 kg Brinell 250 kg (?) Table diameter: mm Projection: 125 mm Test height: 200 mm Accessories: Machine is without table Weight: approx. 70 kg Machine dimensions: 200 x 400 x 700 mm Condition: good Crguqfuhaw

Year of construction: 2016, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: 54260010110010, Climatic Test Chamber - Vötsch Temperature & Humidity Chamber C7-270/10 ESS Experience precise and reliable environmental testing with the Vötsch C7-270/10 ESS, a high-performance climatic test chamber perfect for various industrial applications. This chamber is in excellent condition and fully functional, ready to meet diverse testing needs. Key Features and Specifications: Refrigerants: R404A (6kg), R23 (2.8kg) Voltage: 3/N/PE AC 380V +10%, 50Hz Pressure Ratings: Low Pressure (LP): Max 18 bar g High Pressure (HP): Max 25 bar g Constant Pressure: 17 bar g Performance: Normal Output: 20.2 kW Normal Current: 36A System Orga No.: 67615004d Applications Across Key Industries: This temperature and humidity test chamber is ideal for a variety of industries, including: Electronics and Semiconductors: For thermal cycling, reliability testing, and environmental stress screening (ESS). Automotive: Testing components under extreme environmental conditions to ensure safety and performance. Aerospace: Simulating high-altitude, low-pressure environments for materials and components. Renewable Energy: Reliability testing for solar panels, wind turbines, and batteries. Cs9Mswsfcc Pharmaceuticals and Life Sciences: Stability testing and environmental conditioning for products. Packaging: Evaluating materials under varying humidity and temperature conditions. Material Sciences: Studying material behavior under extreme climatic stress. Why Choose the Vötsch C7-270/10 ESS? High Precision: Designed for tight control of temperature and humidity. Energy Efficiency: Optimized for high performance with low energy consumption. Durable and Reliable: Built with robust components to ensure consistent operation. Advanced Refrigeration System: Features efficient cooling with R404A and R23 refrigerants. This climatic test chamber ensures superior performance and versatility, meeting the rigorous demands of multiple industrial applications. Contact us today to explore how this Vötsch Temperature & Humidity Chamber can enhance your testing capabilities!

Condition: used, CTS Type: TS -70/600-13 Temperature test chamber, water-cooled Type series: TS -70/600-13 Control system: - 32 bit controller - LCD control panel - Digital display of setpoints and actual values - Numerical input of setpoint values - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Test chamber volume: 600 liters Test chamber dimensions: Height approx. 730 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 2250 mm, width approx. 1300 mm, depth approx. 2475 mm Temperature range: -70 to +180°C Heating speed: 13 K/min at -40°C to +120°C Cooling speed: 13 K/min at 120°C to -40°C Temperature deviation: ± 0.1K temporal, ± 0.5 K spatial Electrical connection 400/3P/N/PE Nominal power: approx. 27.8 kW Nominal current: approx. 44.1 A Compressor: 4TC-8.2Y/4PC-10.2Y Refrigerant: R-404 A / R-23 Weight: 1350 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components Cs7Ynyzyqs 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VC 7330/S Water-cooled climate chamber Chamber volume 3300 liters Data for temperature tests: Temperature range -70 °C to + 150 °C Spatial temperature deviation ± 1 to ± 2 K (corresponds to temperature gradient) (2 to 4) Temperature fluctuation over time in the center of the usable space ± 0.8 - 1 K Temperature change rate (with test material: approx. 20 kg aluminum/plastic) Heating in the range -40 °C to +90 °C 4 K/min linear Cooling in the range +90 °C to -40 °C 4 K/min linear Data for climate tests: Temperature range +10 to +95°C Humidity range 10%r.H. to 95%r.H. Temperature fluctuation over time ± 0.2 to - 0.5 K Humidity fluctuation over time ± 1%r.H. to ± 3 %r.H. Dew point range +5°C to +88°C Data for mechanical stress: of the test chamber floor 150 kg max. chamber floor load 250 kg Test chamber dimensions: width 2000 mm x depth 1150 mm x height 1510 mm External dimensions: Width 3500 mm x depth 1450 mm x height 2100 mm Data for operation: Test room lighting Halogen bulb 12 V, 20W Rated voltage: 3/N/PE AC 400 V ± 10% 50Hz Rated power 32 kW Rated current 59 A External control via RS 232 interface possible, of course. Refrigerant: R404A / R23 Weight of test chamber approx. 800 kg Dqobyf Weight of machine set approx. 850 kg Weight: 1650 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VCL 4200/S Water-cooled climatic test chamber Irradiation device with metal halide radiator Door with window Internal dimensions : Width 2000 mm Height 1000 mm Depth 1150 mm External dimensions : Width 3300 mm Height 2000 mm Depth 1250 mm 2X pipe penetration 125 mm Performance range for temperature tests without irradiation Temperature range - 40°C to +150°C Temperature deviation ± 0.5 K in time, in the supply air to the test room Temperature change rate according to DIN 50 011 Part 12 Heating: approx. 1.0 K/min. Cooling: approx. 1.0 K/min to -30°C Performance range for climatic tests without irradiation Temperature range +10°C to +95°C Temperature constancy ± 1.0 K over time, in the supply air to the test room Humidity range 10 to 95 % r.h. Humidity constancy ± 1 to ± 3 % r.h. over time, in the supply air to the test room Dew point range +5°C to +88°C Irradiation (solar simulation attachment) Irradiation type: 4 pcs. 2 kW metal halide radiators each Irradiance 1000 W/m² ± 5 % in the range 280 to 3000 nm Irradiation uniformity ± 50 W in the guaranteed area Reference plane taking into account the installed lateral reflector plates Test area (W x D) 1700 x 800 mm with distance reference plane - UK irradiation unit of approx. 750 mm or 400 mm above the floor Performance range for temperature tests with irradiation Temperature range -10°C to +100°C Temperature deviation in time ± 1.0 K, in the supply air to the test room Rate of temperature change according to DIN 50 011, part 12 Heating: approx. 1.5 K/min. Dqn00J Cooling: approx. 0.5 K/min. Performance range for climatic tests with irradiation Temperature range + 10°C to + 80°C Temperature deviation ± 1.0 K over time, in the supply air to the test room Humidity range 10 % to 85 % r.h. Humidity deviation ± 1 % to ± 3 % r.h. temporally, in the supply air to the test room Dew point range + 5°C to + 76°C Average temperature and humidity changes If temperature and humidity change simultaneously, the humidity is undefined Temperature change + 90°C to 0°C in 1 h 0 °C to - 40°C in 1 h 0 °C to + 90°C in 1 h Humidity change 0 °C to + 90°C / 80 % r.h. in 1 h + 90°C / 80 % r.h. to 0°C in 1 h, whereby the final dehumidification value is not defined. Average temperature and humidity changes If temperature and humidity change simultaneously, the humidity is undefined Temperature change + 47°C to -30°C in 1 h - 30°C to + 23°C in 1 h + 23°C to + 47°C in 1 h Connections: Nominal voltage 400 V +6/-10 %, 3/N, 50 Hz Rated power 23 kW Nominal current 49 A Cekon 63 A plug Connection cable approx. 3.5 m Fuse protection 63 A, slow-blow on site Installation room Heated, with level floor Heat output to the installation room approx. 7 kW with radiation module switched on Weight approx. 2000 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), CTS Type: TW -60/9 Dqnril Temperature test cell water-cooled CTS temperature test cell type TW -60/9 T means: Temperature W means: Walk in -60 means: lower temperature -60°C 9 means: 9 m³ test chamber volume Technical design: Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable capacity adjustment by electronic monitoring and control system, environmentally friendly refrigerant R23 / R404 A Control system: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Technical performance data: Temperature tests: Temperature range -60 °C to +100 °C Temperature deviation ± 0.1 to 0.5 K in time Average rate of temperature change with test material and with heat radiation measured in the supply air. Heating: 1.6 K/min from -40 °C to +85 °C Cooling: 1.6 K/min from +85°C to -40°C Test material 420 kg of solar cell modules with100% flow Heat radiation 3000 Watt permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 9 m³ External dimensions: Width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: Width approx. 1600 mm depth 2400 mm, height 2200 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power 48.9 kW Rated current: 74.9 A Protection class IP 54 Cooling water connections Cooling water supply/return R1 ¼"", internal thread Unpressurized condensate drain R1" internal thread Weight: approx. 5609 kg Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: TW -60/9 Temperature test cell water-cooled CTS temperature test cell type TW -60/9 T means: Temperature W means: Walk in -60 means: lower temperature -60°C 9 means: 9 m³ test chamber volume Technical design: Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable capacity adjustment by electronic monitoring and control system, environmentally friendly refrigerant R23 / R404 A Control system: 32 bit controller LCD control panel Digital display of set and actual values Dqnrhn Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Technical performance data: Temperature tests: Temperature range -60 °C to +100 °C Temperature deviation ± 0.1 to 0.5 K in time Average rate of temperature change with test material and with heat radiation measured in the supply air. Heating: 1.6 K/min from -40 °C to +85 °C Cooling: 1.6 K/min from +85°C to -40°C Test material 420 kg of solar cell modules with100% flow Heat radiation 3000 Watt permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 9 m³ External dimensions: Width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: Width approx. 1600 mm depth 2400 mm, height 2200 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power 48.9 kW Rated current: 74.9 A Protection class IP 54 Cooling water connections Cooling water supply/return R1 ¼"", internal thread Unpressurized condensate drain R1" internal thread Weight: approx. 5609 kg Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Temperature test chamber T-55/1000 Li water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type T -55/1000/Li 1) T means: temperature 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C Cofldalq3A approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Climate test chamber C-55/1000 Li water-cooled Temperature range: -50°C to +100°C Humidity range: 5 to 95% RH Dew point range: 5°C to +78°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type C -55/1000/Li 1) C means: climate 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Dqmrpz Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C Climate tests: Temperature range +5 °C to +95 °C Humidity range 5% to 95% rel. humidity Dew point range +5°C to 78°C Temperature deviation ≤ ±1.0 K in time Humidity deviation ≤ ±3.0% relative humidity over time The technical data refers to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may influence the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Climatic test chamber T-70/600 water-cooled Temperature range: -70°C to +180°C Rated voltage: 400V 3/N PE 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Compressor: TFH2480Z/TFH2511Z Refrigerant R23/R404A Control system: -Microprocessor-controlled control and monitoring system Simple, user-friendly terminal built into the door. -Digital temperature setpoint and actual value display Simple variation via +/- button -Digital input for temperature in °C -PLC compatible -Up to 100 test programs possible -RS 232 interface -2 free switching channels for on-site test material control Insert grid: Stainless steel, contact surface 820 x 710 mm Load per grid max. 35 kg Total load with max. grid configuration 100 kg Cooling unit: Water-cooled, low-noise, fully hermetic Infinitely variable power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 Temperature tests: Temperature range -70 °C to+ 180 °C Temperature deviation ±0.1 to 10.3 K in time Rate of temperature change according to DIN 50 011, part 12 measured in the center of the test room Heating 2.5 K/min Cooling 2 K/min Heat radiation max. 1500 W at +20°C Dqmlv2 The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x Dx H) External dimensions 1050 x 1850 x 1900 mm (W x DxH) Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current: 10.2 A Protection class IP 22 Condensate drain unpressurized R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: T-70/600/S Water-cooled temperature test chamber Control system: - 32 bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions Height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Cktjhwvvdk Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Nominal current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2023, Condition: excellent (used), White Type: 60/90 Weiss HeatEvent F 60/90 heating and drying oven HeatEvent F - for extended safety requirements. Chamber dryer for drying flammable materials. During processes such as the drying of surface coatings, molded paints and impregnating resins, the released substances (e.g. solvents) can accumulate with air to form an explosive mixture. In the simultaneous presence of an ignition source, an explosion may occur. The vötschoven chamber dryers HeatEvent F chamber dryers comply with the extended safety requirements of DIN EN 1539 and, by limiting the amount of solvent solvent quantities allow safe control of the drying and heat treatment processes. Get the most out of your oven. Design your own perfect process with the S!MPATI software package to design your own perfect process. Up to 99 systems can be networked with each other Programs for automatic processes Document, visualize and manage production processes Traceability of process data for seamless proof of quality Performance data at a glance: Heating and drying oven HeatEvent F Usable chamber volume 0.324 m³ Interior, W x H x D 600 mm x 900 mm x 600 mm External dimensions, W x H x D 1000 mm x 1890 mm x 950 mm Installation area, W x D 1000 x 850 mm Temperature 220/300/350 °C Temperature distribution 220 °C (convection mode) ±2.5 K Temperature distribution 300 °C (convection mode) ±3.5 K Heating time 220 °C 22 min. Recovery time to 220 °C after 30 sec 2.5 min. Heating output (220 °C) 14.4 kW Recirculated air volume flow 1200 m³/h Exhaust air volume flow 35 m³/h Trays 10 max. Dqlgkr Weight 330 kg Rated voltage 3/N/PE AC 400V 10% 50Hz Connected load 15 kW Nominal power 14.4 KW Rated current 22 A Protection class IP 54 Additionally for chamber dryer HeatEvent F Type: 60/90 External dimensions, W x H x D 1000 mm x 1890 mm x 1170 mm Solvent quantity at 220 °C 17 g Solvent quantity at 300 °C 12 g Exhaust air volume flow (solvent operation) 138 m³/h Useful volume 0.324 m³ Vapor space volume 0.502 m³ Documents & Downloads Data sheet: Operating instructions Condition: second-hand / used Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), White Type: WK-600/70 Air-cooled climate chamber Technical data: Test chamber designation: WK-600/70 External dimensions with hinges and door lock Height 1995 mm, width 1090 mm, depth 1660 mm Dqkimx External dimensions without hinges and door lock Height 1995 mm, width 1000 mm, depth 1660 mm Test chamber capacity: approx. 600 liters Entry port installed in basic equipment R1: NW 125 mm L1: NW 50 mm Characteristic values for temperature tests: Temperature range -70 to +180 °C Temperature differences (in steady state, according to IEC 60068-3-5) Temperature fluctuation temporally in the center of the usable space ±0.1 to ±0.5 K spatial ±0.5 to ±2 K Cooling / heating operation -70 to 180°C Climatic operation 10 - 95°C Humidity 10...98 % r. h. Temperature change per time Heating up approx. 4 K/min Cooling approx. 2.5 K/min 3/N/PE AC 400V ±10% 50Hz Nominal power: 9.1 kW Rated current: 19.0 A Permissible test material weight Total load of the grate supports 80kg Test chamber floor 80kg Insert grate 40kg Refrigerant: R 404A R-23 Weight: 675 kg The following information is for your safety as a buyer! The following points are carried out on our chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), RMS Type: SW 3509 + amplifier TGD 6000-000.00 and fan Test Manager SWR 900 Power amplifier: TGD 6000 Vibration exciter: SW 3709 High-pressure fan HVM 80-100 GL 270 RMS electrodynamic vibration test system: Technical data system: Performance data Max. Vector force sine 7.5 kN Max. Vector force noise 6.75 kN Max. Vector force shock 13.1 kN Frequency range 0 - 3000 Hz Mass of the vibrating system (Dyn.) 9 kg Main resonance (unloaded) 2.5 kHz Max. Amplitude (sine) 18 mm (noise, shock) 26 mm Max. speed (sine) 1.5 m/s (noise, shock) 2.5 m/s Dqkilz Max. Acceleration sine vibrating system unloaded 833 m/s² Additional load 10 kg 394 m/s² Additional load 30 kg 192 m/s² Additional load 50 kg 127 m/s² Max. Acceleration noise Additional load 30 kg 173 m/s² Max. Acceleration shock vibrating system unloaded 1450 m/s² Additional load 30 kg 335 m/s² Stray field Stray field without counter field coil On the table surface 20 mT 120mm above the table surface 7 mT Stray field with counter field coil On the table surface 10 mT 120mm above the table surface 2 mT Vibration isolator Operating range vertical/ horizontal Resonant frequency 2.7 Hz Operating air pressure 5 bar Pneumatic weight compensation Max. Weight compensation 250 kg Operating air pressure 2.3 bar Cooling Vibration exciter air min. Cooling air volume 9 m/min Max. exhaust air temperature (based on room temperature 35°C) 80°C Power booster air Heat dissipation to room air 1.5 kw Emission: Sound pressure level 1m - distance at a height of 1.6m 105 dBA Electromagnetic field SW 3709 typ. 1.5 mT ( 50Hz) typ. 0.5 mT (100Hz) Electromagnetic field TGD 3000 typ. 150 HT (50Hz) Dimensions / Weights Table diameter / insert thread 224mm / M8 Vibration exciter with integrated isolators 970 × 695 x 950 mm (W x D x H) Weight: 1200 kg Power amplifier 550 x 700 x 2075 mm (W x D x H) Weight: 270 kg Cooling fan 839 x 582 x 900 mm (W x D x H) Weight: 80 kg Connection values: Mains voltage +6/-10% 3 x 400V, 50Hz Connected load 18 KVA Power consumption (sweep mode sine wave) 12 kW Total weight approx. 2000 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Heraeus Vötsch Type: VTV 7060-10 Heraeus Vötsch temperature test chamber water-cooled ( with chamber feed-through for shaker for vibration testing ) The basic equipment, perfect down to the last detail: Operating terminal Color touch panel Dqkftl Microprocessor monitoring and control S!MCON/32*-NET Digital I/O, potential-free Independent, adjustable temperature limiter tmin/tmax Adjustable software temperature limiter min./max. Serial interface RS 232 Potential-free contact for test material switch-off Water-cooled cooling unit Calibration of 2 temperature values Removable base with feed-through 2 pipe feed-throughs Ø 50 mm and Ø 125 mm Vötsch temperature chamber VTV 7060-10 Test chamber capacity 600 liters Performance for temperature tests Temperature range -70/+180 °C Temperature deviation in time ±0.1 to ±0.8 K Spatial temperature deviation ±0.5 to ±2.0 K Temperature gradient 1 to 4 K Temperature change rate heating 9.5 K/min Temperature change rate cooling 10.5 K/min Thermal compensation at +20 °C 8000 W Heat compensation at -20 °C 8000 W Test chamber dimensions Width 800 mm Depth 800 mm Height 950 mm External dimensions Width 1225 mm Depth 2890 mm Height 2150 mm Height to lower edge of test chamber floor min/max 660/1380 mm Feed-through for vibrator 710 mm Ø Feed-through for vibrator 700/700 mm Electrical connection 3/N/PE AC, 400 V±10 %, 50 Hz Rated power 17 kW Rated current 37 A Sound pressure level - 1 m from the front 75 dB(A) Refrigerant: R-404A / R-23 Weight approx. 1400 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.