Used International 1480 for sale (8,574)

Year of construction: 2006, condition: good (used), Configuration • Unwinder • Register Control System • Flexo Unit (Ink / Varnish application) • Laminating / Cold Foil Unit • Die Cutting Unit • GEW UV Dryer • Slitting Unit • Rewinder _____ Nodpfx Ajynkwnskfscr Machine Description The ABG Digicon 1 is designed as a modular finishing solution for digital and flexographic label production. The installed flexo unit allows varnish or spot colour application. The laminating / cold foil module enables added-value embellishment. The die-cutting and slitting units ensure precise finishing and roll conversion. The semi-rotary functionality provides cost-efficient short-run flexibility, while full-rotary mode enables higher productivity. _____

Year of construction: 2004, condition: good (used), Main Technical Specifications • Web width: max. 330 mm • Max. web speed: 200 m/min • Max. inspection speed: 150 m/min (100% inspection) • Unwind roll diameter: max. 700 mm • Rewind roll diameter: max. 500 mm Ncjdpfx Ajylynwekfor • Core diameter: 76 mm (pneumatic expanding shafts) • Web tension control: 0.5 – 10 kg, steplessly adjustable • Electronic web guiding system (Fife with ultrasonic sensor) Slitting & Finishing • Shear knife slitting unit • 3 top and 3 bottom knives included • Fine adjustment in 0.05 mm increments • Integrated edge trim extraction • Pneumatic splice unit • Integrated label and meter counter Inspection System fleyeVision print inspection system (100% inspection) • Matrix camera (1380 x 1040 pixels) • Flash illumination • Detection of print defects such as missing print, register deviation, spots, missing labels, missing text, matrix waste Inkjet System Imaje S8 Master 2.2G • Two nozzles per printhead • Suitable for marking up to four label lanes • Fully integrated into the central machine control system

Condition: new, New machine MASS International Model NS1 Angle conveyor / L-shaped conveyor / Conveyor belt Available at short notice Adjustable angle conveyor NS1 with catch plates in the feed section Example as shown: Feed section: 600 mm Rising section: 1300 mm Usable width: 250 mm External width: 305 mm (without motor) Height-adjustable discharge height: 750 - 1050 mm Adjustable angle between feed and rising sections Variable inclination adjustment Nedsuip Ilspfx Akfjcr Cleat height: 30 mm Cleat spacing: 500 mm Belt speed: 3 m/min Mobile on steerable locking castors Three-piece hopper plates for feed section The quoted price refers to the NS1. Other angle conveyors in different sizes available to order—see list, image 2. Custom dimensions available upon request.

Condition: new, New machine MASS International Color Mixer / Batch Mixer Mixer for plastic granulates Available for prompt delivery from stock Example: Mixer MV 2 Steel construction Capacity: 200 liters / 120 kg granulate Njdpfxju Ti Tve Akfocr Length: 700 mm Width: 700 mm Height: 1050 mm (including control panel 1250 mm) Mobile on lockable swivel castors Dual extraction ports for suction lance, Additional discharge opening at the bottom, Safety switches on inlet cover and discharge opening, Height adjustable in 25 mm increments, Inspection window for fill level monitoring Control via control panel Interval and continuous mixing modes adjustable Description: MV batch mixer for thorough blending of the entire plastic granulate batch. Ideal for incorporating additional components such as color masterbatch, additives, fillers, etc. Due to the forced guidance by the screw sleeve, the entire plastic granulate is continuously moved inside the mixer and becomes quickly and completely blended with the added components. There are no "dead" corners that remain unmixed, as is often the case with conventional screw mixers or agitators.

Condition: ready for operation (used), Conveyor Belt, Conveyor System, 5m, Used Machine Manufacturer: Mass International Model: NP / 042/71 Njdpfx Akov Dgrvsfecr Overall Dimensions: 5050 x 430 x 930 mm Belt Size: 4750 x 200 mm Belt Speed: 3.7 m/min The conveyor is equipped with 3 fans, making the system ventilated/coolable. Electrical Specifications: 400 V

Condition: ready for operation (used), Conveyor Belt, Conveyor System, 6m, Used Machine Manufacturer: Mass International Model: NP / 042/2 Overall Dimensions: 6000 x 480 x 1000 mm Belt Size: 5675 x 200 mm Belt Speed: 3.7 m/min Ncjdpfx Akevvlkhefer The conveyor is equipped with 3 fans, making the system ventilated/coolable. Electrical Specifications: 400 V

Condition: ready for operation (used), Conveyor Belt, Transport Belt, Running Belt 6m, Used Machine Manufacturer: Mass International Model: NP / 04270 Overall Dimensions: 6000 x 420 x 930 mm Belt Size: 5675 x 200 mm Belt Speed: 3.7 m/min The belt has 3 fans, and the track can be ventilated/cooled. Nedpfx Aksv Dgndofecr Electrical Specifications: 400V

Year of construction: 2012, condition: ready for operation (used), Various small devices for packaging processes are available. 1) Can seaming machine. 2) Nord SK 180E peristaltic pump, year of manufacture: 2016. 3) Miveg/MetalPack sealing machine. 4) Bourgeat water bath. 5) FP International FMini PakR air cushion machine. Documentation available. On-site inspection is possible. Nedpfx Aewty Etokfjcr

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Prodim proliner 8XCS scanner. Includes software. Small tripod. Leaps. Backpack. IPT and hook pen and remote. Extras included - Heavy duty plastic carrying case. Extra remote. Measuring support bars. Ncodpoyl Spasfx Akfjr

Condition: new, New device MASS International Angle Conveyor Belt NDS L Conveyor belt/assembly line Available at short notice Angle conveyor belt with adjustable angles Incl. paddle separator and side catch plates at the feed section Example as shown: Feed section: 600 mm Upright section: 1300 mm Discharge section: 800 mm Usable width: 350 mm Outer width: 405 mm (without motor) Height-adjustable, discharge height 700 - 1000 mm Adjustable angles for feed and discharge sections Adjustable inclination PU belt, super grip Belt speed: 3 m/min Mobile on swivel lockable castors Nsdpfxor A D S Eo Akfocr Side catch plates at the feed section Paddle separator is individually controllable and height-adjustable

Condition: new, New equipment MASS International Discharge Conveyor NPS Conveyor belt / Discharge belt Available at short notice Discharge surface without side wall Height-adjustable, mobile on swiveling stop rollers Example: NPS 1 Length 1500 mm Usable width 250 mm External width 250 mm (without motor) Discharge surface without side wall, thus full usable width Height-adjustable discharge height 200 - 400 mm PU belt, smooth, black Belt speed 3 m/min Conveyor belt mobile on swiveling stop rollers The quoted price refers to the NPS1. Optional: Dimensions on customer request Ncsdpfx Asizi S Dokfsr Belt suitable for food use (FDA-compliant) Modified belt speed Frequency converter for stepless belt speed adjustment etc.

Condition: new, New equipment MASS International NS3 Speciale Angled conveyor belt with separator Available at short notice Example as pictured: L-shaped conveyor with double roller separator Infeed section: 600 mm Inclined section: 1300 mm Usable width: 450 mm Ncedpfx Ajd Tidxjkfer Outer width: 505 mm (without motor) Height-adjustable discharge height: 750 - 1050 mm Adjustable angles both in the infeed section and incline Black PU belt with cleats Cleat height: 20 mm Cleat spacing: 500 mm Belt speed: 3 m/min Mobile on steerable braked castors Side collection plates in the infeed section Optionally also available as angled conveyor with Supergrip belt and separator (see last two photos) Double roller separator with covered belt drive fitted with Super Grip Adjustable discharge chute

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. Nedpshg Rcxjfx Akfocr The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Condition: used, functionality: unexamined, machine/vehicle number: Platinium GPC PDP Printer, Used IP Semi Automatic Pad Printing Installation / Pad Printer IP Printing International Semi Automatic Pad Printing Machine "Used for Pad Printing of PIA on son-tubes and shaped products" Manufacturer: IP Printing International Belgium Model: Slider 160 GPC+P 290 GPC Ncsdpjw H Naajfx Akfor Type: Platinium GPC PDP Printer Controller: Siemens Simatic Tough Panel Including pallet with tools and spare parts

Condition: new, Year of construction: 2018, functionality: fully functional, power: 25 kW (33.99 HP), New in box specialized food waste shredder. Manufactured in 2018 but has never been used, still in box. Nedpfowq Rapox Akfocr

Condition: used, Year of construction: 2005, functionality: fully functional, For sale is a complete shrink sleeve system consisting of an Etisleeve sleeve applicator and a multi-zone steam shrink tunnel Powersteam, both from the renowned manufacturer Sleever International. The system was in productive use until recently and efficiently processes shrink sleeves with high precision onto cylindrical containers. Machine Configuration: Sleeve Applicator Manufacturer: Sleever International Model: Etisleeve Type: 75 SL 2V 80 Year of manufacture: 2005 CE-compliant Steam Shrink Tunnel Manufacturer: Sleever International Model: Powersteam Nodpfxsx Tg Ubj Akfjcr Type: MSA 250 Year of manufacture: 2005 Control & Operation – Integrated HMI control panel – Digital input of sleeve length – Performance display (products/min) – Cycle and process control – Safety monitoring (housing supervision, reset function) – Production and daily counters Technical Features: – Precise vertical sleeve application – Automatic sleeve film unwind – Centering station for precise positioning – Multi-zone steam shrink tunnel with stainless steel interior – Continuous stainless steel conveyor belt – Auger feed with interchangeable augers – Height- and format-adjustable guide rails – Full safety glazing with interlock system – Industrial-grade drives and robust mechanical components Formats & Performance: – Proven operation with 100 ml containers – Documented sleeve lengths (e.g., 155 mm) – Additional formats possible depending on configuration – Output depending on product approx. 40–80 containers/minute Condition: – Used – Complete and fully functional system Scope of Delivery: – Etisleeve sleeve applicator – Powersteam steam shrink tunnel – Integrated conveyor technology – Feed screws and visible format parts – Existing adjustment and format documentation The system is currently still fully assembled and available for inspection under production conditions. A live demonstration with product and sleeve film under power is possible by prior appointment. Location: – Berlin – Inspection possible Price: – On request

Condition: excellent (used), functionality: fully functional, Evaporative Condenser Baltimore Aircoil International VXC-250 Manufacturer: Baltimore Aircoil International Model: VXC-250 Serial Number: H160220703 Dimensions: 3600 × 3530 × 5000 mm The BAC VXC-250 evaporative condenser is a high-performance unit designed for industrial cooling and HVAC systems. It operates based on the principle of evaporative cooling, which provides low energy consumption and efficient heat dissipation even under heavy loads. Ncsdjxpxiajpfx Akfsr Robust construction and optimized fan efficiency ensure reliable operation and long service life. The VXC-250 model is adapted for operation in demanding industrial environments, offering high performance in a compact size.

Condition: excellent (used), IM Very good condition. Njdpfx Asw Ebwuokfscr

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: P.0020001424, X-Ray Yxlon international MU231 - fully functional (2003) Fully automatic, 100% x-ray inspection of alloy wheels using YXLON's Y.AI/Rel.9 ADR program reaches a cycle time below 25 seconds per wheel. The automatic defect. Fully functional X-Ray for alu wheels. Possible alu wheels from size 12 to 19. Machine is fully working, perfect condition. Ncedpox Hqnrsfx Akfjr During 2025 full repas was done - all issues are now sorted (tested). Software is unlocked. New owner can test the machine before purchase (Central Bohemia). Machine label attached. Price: 49.000 EUR excl. VAT (price does not include transport and duties) Invoice will be issued in EUR from Czech company. When you will have any questions, do not hesitate to contact us - e-mail / WhatsApp / call Lead cabin (1) with shuttles (2) for the transport of wheels in/out the cabin Decollators to get single wheels for transportation in the cabin X-ray tube (3), Image Intensifier (4), High-voltage generator, X-ray control unit (5) Industrial PC (6) (with mechanical positions and X-ray parameters for every wheel type) Control cabinet with PLC (7) Wheel manipulator (8) (Rotation and linear movement of wheels) X-ray-manipulator (9) (tilt axis with X-ray tube and Image intensifier) Vision System for wheel type recognition Image-Processing Unit (Host PC with Slave PCs) Output conveyor (10) e.g. with an alterable switch (for accepted wheels / rejects)

Condition: good (used), For sale is a directional jet agitator from Stelzer Rührwerke International GmbH. It is the model SM460-DF. Product data: 1455 R.p.m. Nsdpfefr Icuox Akfscr 400V 18,5 kW Shaft length 720mm Blade diameter 280mm For further data see type plate (photo)

Condition: new, New device MASS International Conveyor belt NI 1 Conveyor belt/unloading conveyor Angle-adjustable conveyor belt with hopper in the feed section available at short notice Example: NI 1 Length 1500 mm Effective width 250 mm Outer width 305 mm (without motor) Height-adjustable dispensing height 600 - 1000 mm Variable inclination adjustment Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m /min mobile on steerable stop rollers Optional: Nsdpjh Nyp Uofx Akfocr Dimensions on customer request FDA compliant belt Modified belt speed etc.

Condition: new, New device MASS International Angle Conveyor / Belt Conveyor L-shaped conveyor belt with fixed 35° angle Available at short notice MASS International Angle Conveyor NC1 Conveyor belt with fixed angle and collecting plates in the infeed section Example as illustrated: NC 1 Infeed section 600 mm Inclined section 1300 mm Usable width 250 mm External width 305 mm (without motor) Height-adjustable discharge height 750 - 1050 mm Fixed angle between infeed and inclined section Ncjdpfehm Axgex Akfjr Inclination variably adjustable Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m/min Mobile on swivel castors with brakes Optional: Dimensions to customer specification FDA-compliant belt Modified belt speed etc.

Condition: new, Year of construction: 2023, The conveyor is from 2023, new and unused. We offer 1 year warranty. Ncedpfxjlkda Hj Akfsr Side panels can be added later. For examples see pictures.

Year of construction: 2022, condition: new, - Task length : 600mm - Climbing belt length : 1800 mm - working width 450 mm / total width 505 mm - mobile on steerable stop rollers - angle adjustable - incl. 3 collecting plates Ncedpolkdbyjfx Akfor - belt speed : 3m/min - cleat height : 30 mm - spring assisted height adjustment

Condition: new, Year of construction: 2022, - Delivery 500 mm - Climbing belt 1300 mm - Feed 600 mm - useful width 450 mm / total width 505 mm - delivery height : min: 700mm max : 1000mm - cleats 30 mm high (from a useful width of 350 mm the cleats are divided in the middle) Ncedpeg Arxvofx Akfjr - cleat spacing 500 mm Possible on request: - Special size - cycle control - frequency converter (485 €) - Corrugated edge (492 €)