Used Ip55 for sale (280)

Condition: used, Year of construction: 2008, Overview This NIKO VP11e is a horizontal pneumatic (membrane) press for whole or destemmed grapes, built in 2008 by NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia). The press is made entirely of stainless steel and runs a fully automatic, multi-stage pressing program once started: grapes are loaded through the two perforated cylinder doors or axially, an internal membrane inflates against the load to extract juice at progressively increasing pressure, and the cylinder rotates between stages to break up ("crumble") the pressed cake ahead of the next drain cycle. Juice drains into a wheeled collection pan under the cylinder with a pump connection; pomace is discharged by rotating the open door face-down over the pan. The press is mounted on castors for repositioning and remains still installed and under power at the seller's winery in Spain. It can be inspected in operation on request. Technical data - Manufacturer: NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia) - Model: VP11e - Year of manufacture: 2008 - Machine type: horizontal pneumatic (membrane) press for grapes, mobile on castors - Cylinder volume: 1,100 L (cylinder Ø 920 mm) - Juice drainage pan (tina) volume: 450 L - Loading doors: 2, 640 x 420 mm each - Max. working pressure: 1.7 bar - automatic multi-stage program (pre-press 0.3 bar, then 0.8 / 1.2 / 1.7 bar for whole white grapes; 0.3 bar, then 0.8 / 1.2 bar for destemmed, fermented red grapes) - Integrated blower for membrane aspiration: -0.2 bar vacuum / +0.2 bar pressure - Power: 2.9 kW, single-phase 230 V (1/N/PE), 50 Hz - Mechanical protection: IP55 - Noise level: < 75 dB - Dimensions: approx. 2,520 x 1,270 x H 1,560 mm (with axial loading extension; 2,350 mm long without it) - Weight: approx. 430 kg Equipment - Pneumatic membrane pressing cylinder with integrated aspiration blower - Wheeled juice drainage pan with pump connection - Electric control panel with automatic pressing programs (incl. draining cycle) - Axial loading option - Safety guard on drive elements, door interlock switch and STOP switch - OEM operating manual (Spanish) Condition Used - still installed and under power at the seller's winery. No further condition report has been provided by the seller; the machine can be inspected in operation on site. Availability Chodpfx Abszk Eqmsteb Immediately. Location: Spain. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: new, functionality: fully functional, Available: Heating unit for FINPRESSE 130-1-12 press plates – 18 kW, temperature up to 130°C. The machine is brand new and offered to order. Before placing an order, we confirm the current delivery time and the exact configuration of the unit. The main advantage of the unit is its independent heating and forced oil circulation system, which enables precise heating of the press's work surfaces. The 18 kW heating unit, LOWARA circulating pump, and digital temperature control ensure stable conditions during the gluing, veneering, laminating, and pressing of wood and panel components. Specifications: • Manufacturer: FINPRESSE s.a.s. • Model: 130-1-12 • Type of equipment: Mobile heating and circulation unit for press plates • Heating medium: diathermic oil / thermal oil • Power of the heating unit: 18 kW • Maximum operating temperature in configuration with LOWARA CEA80/5/D-V pump: 110°C • Digital temperature regulation and control • Power supply: 400 V • Power system: three-phase, 3F + PE • Manufacturer of circulating pump: LOWARA • Pump model: CEA80/5/D-V • Pump design: version with FKM elastomers • Pump motor rated power: 0.75 kW • Pump capacity: 30–100 l/min, i.e. approximately 1.8–6.0 m³/h • Suitable for presses with shelf lengths up to 3.0 m • Pump motor speed: approximately 2875 rpm • Pump motor protection rating: IP55 • Independent control of the circulating pump and heating unit • Pump start-up indicator • Heating start-up indicator • Indicator light for reaching the set temperature • Fault indicator for the heating unit • Main power disconnect switch • Temperature sensor for the medium Cedpfx Abeztl R Sotjhb • Expansion tank located above the heating system • Separate supply and return manifolds • Multi-point connections enabling connection of press plate circuits • Tray for collecting any oil leaks • Drain connection • Mobile construction on transport wheels with locking capability • Weight: approximately 200 kg • Overall dimensions: approximately 140 × 45 × 240 cm (L × W × H) • Technical and operating documentation in Italian • Complies with CE requirements Applications: • Heating of work surfaces of hydraulic platen presses • Maintaining the set temperature during pressing and gluing of components • Veneering and laminating of furniture panels, MDF, plywood, and wood • Applying HPL laminates, natural veneers, and other surface materials • Pressing of furniture fronts, doors, and composite components • Stabilizing the temperature during bonding and curing of adhesives Additional information: • The equipment is offered to order • Current delivery time is confirmed before placing an order • The pictures show the offered model of the equipment in an example configuration • Maximum operating temperature depends on the pump used, seals, and type of thermal oil • Configurations designed to operate at temperatures up to 130°C • The machine is covered by a warranty under the conditions specified by the manufacturer • The price stated in the auction applies to export sales/WDT with a VAT rate of 0%; in the case of domestic sales, 23% VAT will be added Financing and transport: • We organize transport with the MDD fleet or through external carriers • We help in obtaining a lease or leasing loan • Delivery costs depend on the destination and the method of transporting the equipment

Condition: like new (used), Year of construction: 2016, functionality: fully functional, RGS AS556 three-phase industrial vacuum cleaner, specifically designed for use in the textile, paper, and packaging industries. Designed for continuous operation and the extraction of edge trimmings and cutting dust, threads, and fibers, as well as packaging waste. Can be used both mobile and stationary, with a 100mm viewing window in the lid. New price approx. €7,300 (2025) DATA, DIMENSIONS & WEIGHT: Voltage in volts: 400/50Hz Protection class: IP55 Power in kW: 4.0 Airflow rate m³/h: 520 Vacuum in mbar: 320 Filter area: 1.4m² Dust class: L Absolute filter Option: H14 Collection container Ø 560mm in liters: 215l Suction connection Ø in mm: 70 Weight kg: 35 Dimensions Ø x H in cm: 46 x 116 Design/Variant: painted Dents and scratches are present! Technical specifications and illustrations are not binding. Changes and errors excepted. NOTES ON SALE: Chodpfx Ajziwtqobteb An inspection can be arranged at any time in Sassenburg. The price quoted is the gross price, including statutory value-added tax. In the event of a sale to third countries or EU countries, with the exception of Germany, an invoice can also be issued without value-added tax if a valid VAT identification number is provided. NOTES ON COLLECTION: The item is available immediately. We will gladly assist with loading using a forklift.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, overall weight: 54 kg, total length: 489 mm, total width: 390 mm, total height: 454 mm, power: 3.6 kW (4.89 HP), input frequency: 60 Hz, TAWI's powerful vacuum pump is engineered for heavy lifting tasks where reliability and high performance are critical. The direct-drive design reduces friction and wear, ensuring minimal downtime and a stable, efficient vacuum capacity—ideal for demanding industrial and logistics environments. - High Performance: Stable vacuum power for heavy lifting using TAWI vacuum lifters VM60–270 (VM160–300). Chedpfx Ajytq D Sjbteb - Direct-Driven Pump System: Reduced friction and unnecessary wear result in a longer service life and fewer maintenance requirements. - Dual-stage Side Channel Blower: Air-cooled design minimizes overheating risk and improves operational stability. - Energy-Efficient IE3 Motor: Reduces energy consumption and operating costs. - Optional Sound-Absorbing Hood: Lowers noise levels in the work area. - Robust Industrial Construction: Designed for long-term operation with minimal downtime. - Noise Level: Typically 71–73 dB(A) depending on model. - Protection Class IP55: Suitable for industrial environments.

Condition: new, For sale: professional electric motor from the renowned German company VEM motors GmbH Model KTTR 132 SX2 The motor is new, stored in a warehouse, and has never been used. Very good condition, with possible minor signs of storage. Technical data: Power: 7.5 kW Speed: approx. 2880 rpm Csdpoyv R Rfsfx Abtohb Voltage: 400/690 V Frequency: 50 Hz Current: 14.5/8.4 A cos φ: 0.86 Protection rating: IP55 Insulation class: F Weight: approx. 57 kg Design: IM B3 Made in Germany Applications: – Industrial machinery – Pumps – Fans – Production lines – Automation A solid and reliable motor, ideal for operation in demanding industrial conditions.

Condition: new, Year of construction: 2022, functionality: fully functional, power: 2,500 kW (3,399.05 HP), input voltage: 10,000 V, input frequency: 50 Hz, protection type (IP code): IP55, ABB AC Motor Type: AMI 630L4A BSS Design: IM1001-B3 Standard: IEC60034-1 Insulation Class: F Protection Class: IP55 Duty Type: S1 Input Voltage: 10,000 V Csdpfoxann Tjx Abtohb Input Current: 168 A Power Pn: 2,500 kW RPM: 1,488 Power Factor: 0.9 Frequency: 50 Hz

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: S0063866, New variable screwcompressor ALMIG Variable XP 45 Controller: Aircontrol Premium Year 2022 Hours: 1 h good condition, available short. Technical specifications: type: Variable XP 45 Chsdpfx Aoxw T Sxjbteb Possible operating pressures of the system: 5 to 13 bar Quantity delivered at 5 bar : 3.02 to 8.42 m³/min at 6 bar : 3.00 to 8.40 m³/min at 7 bar : 2.98 to 8.38 m³/min at 8 bar : 2.96 to 7.86 m³/min at 9 bar : 2.95 to 7.08 m³/min at 10 bar : 2.93 to 7.02 m³/min at 11 bar : 2.90 to 6.26 m³/min at 12 bar : 2.85 to 6.23 m³/min at 13 bar : 2.82 to 5.92 m³/min Installed power: 45 kW Protection class / Insulation class Drive motor: IP55 / ISO F Operating voltage / frequency: 400 V / 50 Hz Sound pressure level (DIN 45635 T13) : 72 dB (A) Compressed air connection: G 2" Dimensions and weight Length : 2000 mm Width : 1250 mm Height : 1750 mm Weight : 1555 kg Visit our store. We´ve got a lot of compressors and dryers on stock.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: API629410, Technical characteristics: Core Specifications Attribute Value Motor Power: 55 kW (75 hp) Maximum Working Pressure: 7.5 bar Free Air Delivery (FAD): approx. 174.4 l/s (approx. 369 CFM) Cooling Type: Air-cooled Chjdpjyam Nqefx Abteb Noise Level: approx. 67 dB(A) Drive Type: Gear-driven Integrated Dryer: Yes (Full Feature “FF” version) Electrical Supply: 400V / 50Hz Regulation System: Full load / no load with Elektronikon® controller Dimensions (L×W×H): approx. 1656 × 1100 × 1968 mm Weight: approx. 1100 kg Design & Features: - Sound-attenuating enclosure: Steel canopy with flame-retardant insulation for quiet operation. - Elektronikon® Controller: 3.5” color display with programmable pressure bands, remote monitoring, and auto-restart capability. - Zero-loss condensate drain: Integrated into the dryer for efficient moisture removal without wasting compressed air. - Integrated moisture separator: Labyrinth-style, built into the aftercooler for enhanced air quality. - IP55-rated motor: Dust and water-resistant, suitable for industrial environments. Reliability & Maintenance: - Synthetic oil: Rated for 8,000-hour change intervals. - Spin-on oil filter: With integrated bypass valve for easy servicing. - ASME-approved air/oil separator: For long service life and minimal oil carryover. Machine status: WORKING

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: API628950, Technical characteristics: Core Specifications Attribute Value Motor Power 90 kW (approx. 125 hp) Max Operating Pressure 8.6 bar to 13 bar (125–188 psi) Free Air Delivery (FAD) ~565–588 CFM; 125 psi Cooling Type Air-cooled Noise Level ~74 dB(A) Drive Type Direct drive Integrated Dryer Yes (Full Feature “FF” version) Voltage 400V / 50Hz or 460V / 60Hz Dimensions (L×W×H) ~2179 × 1300 × 1968 mm Weight ~1500 kg Codpfx Aoyam Tcebtehb Performance & Features - Elektronikon® Touch Controller: Advanced microprocessor for monitoring, control, and remote access. - RDX Synthetic Oil: Long-life lubrication for reduced maintenance. - Energy Efficiency: Specific power as low as 18.9 kW/100 CFM, depending on load. - Integrated Refrigerated Dryer: Ensures clean, dry air with minimal pressure drop. - Oil-Water Separator: Built-in for environmental compliance and air purity. Reliability & Maintenance - IP55-rated motor: Dust and water-resistant for harsh environments. - No-loss condensate drain: Prevents compressed air waste and reduces downtime. - Sound-insulated bodywork: Minimizes noise and vibration. Machine status: WORKING

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Chjdsx R D Efopfx Abteb Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: used, We offer this used BUSCK WE250M-4 machine, type butt-end reduce, year of manufacture unknown. Type: WE250M-4 Chjdpey Stwmofx Abteb Insulation class/operating mode: S1 Degree of protection: IP55 Rated voltage: 400 V Frequency: 50 Hz Rotational speed: 1480 rpm Rated power: 5.5 kW Rated current: 9.5 A Cos φ: 0.89 Rated voltage (Y): 690 V Frequency (Y): 50 Hz Rotational speed (Y): 1480 rpm Rated power (Y): 5.5 kW Rated current (Y): 5.1 A Cos φ (Y): 0.89 Rated voltage: 400 V Frequency: 60 Hz Rotational speed: 1780 rpm Rated power: 6.3 kW Rated current: 9.26 A Cos φ: 0.88 Bearing: NU314 If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: good (used), Year of construction: 1997, Stainless Steel Tank 500 Liters with SCABA Agitator and Measurement Technology Manufacturer: Food Tech Tank Type: Stainless steel tank with agitator Capacity: 500 l Year of manufacture: 1997 Quantity available: 2 units Agitator: SCABA Motor power: 0.37 kW Protection class: IP55 Load cells: FLINTAB Type: SB4-5kN-GP Measurement technology: Endress+Hauser Liquiphant Supply voltage: 10–55 V DC Equipment and Accessories Agitator fully assembled Internal mixing system with agitator blades Manhole with cover Filling opening with grate insert Level sensor Endress+Hauser Liquiphant FLINTAB load cell system integrated into support frame Chedpfx Asyxvwpjbtjb Discharge at the bottom with connection Pipe fittings and valves

Condition: used, Year of construction: 1994, functionality: fully functional, Item: AS-10177 - Alfa Laval Decanter For sale: Used, 5x Alfa Laval Decanter Centrifuges NX 418 S-31G (Year 1994) with Valve & Piping Units Manufacturer: Alfa Laval Separation A/S (Søborg, Denmark) Alfa Laval Decanter Centrifuge – Type NX 418S-31HS High-quality Alfa Laval decanter centrifuge, manufactured in Denmark. Complete unit with Flender / ATB Loher 37 kW main drive motor, electrical control cabinet, stainless steel frame, and integrated piping system. The unit is in very clean condition and was previously used in food processing. Technical details: Manufacturer: Alfa Laval Separation A/S, Denmark Type: NX 418S-31HS Material: Stainless steel Main motor: Flender / ATB Loher 37 kW, 1470 rpm, 380 V, IP55 Drive type: Belt-driven main motor Mounting: Stainless steel base frame Control system: Electrical panels and valve system included Condition: Used, in very good working condition Performance / Capacity: Dairy / whey / milk solids: 5,000 – 10,000 L/h Food / beverage (juice, yeast, starch): 6,000 – 12,000 L/h Industrial / sludge applications: 3 – 8 m³/h (depending on solids content) Bowl diameter: 418 mm Bowl speed: up to approx. 4,000 rpm Codpjxqga Aofx Abtehb Max G-force: approx. 4,000 × g Applications: Ideal for dairy, food, beverage, starch, chemical, and industrial wastewater separation processes. Location: Denmark Price: On request Package Options: Available as a complete line (3 x decanters + 3 x valve sections) Or sold individually with matching valve section Location: Stored in Denmark, ready for loading. Export documentation and transport arrangements can be provided.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, The machine is unused! TECHNICAL DETAILS Rotor: Open rotor Grinding mechanism: 650 mm × 550 mm Application: Grinding of, for example, lumps MACHINE DETAILS Power: 22 kW Voltage: 380 V Frequency: 50 Hz Current consumption: 42.5 A Chedpozr Hziofx Abtob Speed: 1,470 rpm Protection class: IP55 Insulation class: F Operating mode: S1 – Continuous operation Sound level: 71 dB(A) Weight: approx. 190 kg EQUIPMENT Control system Star/delta connection possible Spare parts can be supplied for an additional charge.

Condition: good (used), machine/vehicle number: B35 MS 80 2-4 + XPU, input voltage: 400 V, input frequency: 50 Hz, input current: 2 A, type of input current: three-phase, type of cooling: air, protection type (IP code): IP55, Cylindrical geared motor with a 0.75 kW three-phase motor. Supply voltage 400 V, frequency 50 Hz, motor speed 1390 rpm, rated torque 5.15 Nm. Flange-mounted design (B5), shaft diameter 19 mm. Capable of operating in both directions of rotation (clockwise/counterclockwise). Protection class IP55, copper winding, aluminum-cast iron housing. Csdpfx Abjzgugietshb The geared motor is designed for driving machines, conveyors, and mechanical and hydraulic systems. It finds application in agriculture, industry, construction, and other applications requiring reliable drive. Technical condition is good, the device is fully functional. Sold as shown in the pictures.

Year of construction: 2025, condition: like new (used), Almost NEW Compact filtering unit mod. FC320 for sale! ADVANTAGES: 1. Negative pressure 2. Fire extinguishing system by powder 3. Rotary valve 4. Pulse air sleeves cleaning 5. Extra low noise 6. Waste extraction to big bags. The filtering unit mod. FC320 is studied and realized for an efficient filtration in less space. Its compact and thin line makes it suitable to be placed in every area, also inside productive areas. Thanks to an accurate design it is reliable, silent and easy to use. EXTRACTION AND FILTERING GROUP 1. Nr.1 filtering unit mod. F320 built in galvanized steel sheet, with dimensions 3500 x 1100 x (h) 4300 mm, running in negative pressure and equipped with nr. 60 antistatic polyester filtering bags with dimensions Ø125 x (h) 1300 (filtring area= 60 m2, grammage= 500 g/m2), with cleaning system by countercurrent compressed-air blasts (ON-LINE). The filter is complete with: · Nr.1 tangential inlet to avoid the direct contact of the waste with the filtering bags, making the filter last longer; Nr. 1 motorized screw conveyor, equipped with a proper motor gearbox, for the discharge of the filtered material towards the opening in the lower hopper; · Nr. 1 kit for Big-Bag installed under the hopper, complete with rotary valve and level probe for the control of the filling level of the bag; · Nr.1 high-performance fan, designed to run with clear air, equipped with a premium branded Class S1, IP55 code electric motor with a power 7,5 kW; · Control panel for the management of the fan and the cleaning system; Model FC320 Dimensions[mm] 3500 x 1100 x (h) 4300 Installed power [kW] 7,5 - 400v/50Hz Exhaustion system Into a big-bag Filtering bags dimensions[mm] Ø 125 x (h) 1300 Filtering material Antistatic polyester Number of bags 60 Grammage [g/m2] 500 Chedpfxozi Uqmj Abteb Filtering surface [m2] 60 Sleeves cleaning system Automatic cleaning system with compressed air Air Flow 6000m3/h 1. Instruction and maintenance manual of the filtering unit; 2. Filtering unit conformity declarations with CE marking; 3. Nr.1 automatic fire protection system, composed of: • Nr.1 powder extinguisher; • Diffusing tube with nozzles; • Polymeric tube for fire detection (to be filled with 18 bars nitrogen); • Alarm pressure switch;

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: SV 5960/1, overall weight: 73 kg, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 21 A, type of input current: three-phase, rotational speed (max.): 2,930 rpm, protection type (IP code): IP55, For sale is a high-performance air blower / side channel compressor with a high-quality 11 kW three-phase motor. This unit is suitable for industrial applications such as ventilation and exhaust systems, dust extraction, pneumatic conveying, drying systems, or process air supply. Technical data: Power: 11 kW Voltage: 400 V (three-phase) Frequency: 50 Hz Current consumption: 21.8 A Speed: 2,930 rpm Efficiency: IE3 Premium Efficiency (91.2%) Protection class: IP55 Insulation class: F Operating mode: S1 (continuous operation) Chjdpsy U Uhlefx Abteb Frame size: 132M Design: IMB5 Ambient temperature: up to 40 °C Weight: approx. 73 kg Made in Germany

Condition: used, Year of construction: 2018, machine/vehicle number: LC655, Used COMAC can filling line for beer 6000 CPHTechnical Specifications & Performance DataThis complete can bottling line engineered around a filling and seaming monoblock is designed for efficient beverage production in industrial packaging environments. Optimized for carbonated beer, it provides reliable performance for standard can formats with precise isobaric filling and robust quality control. As a used bottling line, it offers second hand value with professional features suitable for modern beverage production.Product: Carbonated beerFilling temperature: 2–4°CCO₂ quantity: up to 5.5 g/LProduction speed (reference): 6,000 cph on 0.33L; 5,500 cph on 0.44LContainer types: Two-piece aluminum cans with SOTCan formats: Compatible with 0.33L and 0.44LDiameter: 66 mmClosure: 202 can endRequired product pressure: 3–4 barRequired water pressure: 3–4 barRequired air pressure: 6 barRequired CO₂ pressure: 6–8 barFilling monoblock: ISO 14-2 (14 isobaric valves, 2 seaming chucks)Depalletizer pallet sizes: 1,120 × 1,300 mm (standard), 1,120 × 1,420 mm (optional)Depalletizer discharge height: 3,370 mm; max pallet height 2,813 mmRinser tunnel length: 2,380 mm; ionized air with HEPA filtration (99.97% at 0.3 µm)Automation: Siemens PLCs and HMI across key stationsAdvanced Automation & Control SystemsThe line integrates modern automation with operator-friendly HMIs for streamlined control and repeatable changeovers. Electrical and pneumatic systems are built for beverage production reliability, enabling precise handling of carbonated products.Control architecture: Siemens PLC Logo 7/2 on depalletizer; Siemens S7-1200 PLC with Weintek 7" touch screen on the labeling machine; Siemens touch screen and PLC on the monoblockDrive technology: SEW 4 kW motor for seaming rotation; frequency converters on key drivesAutomated height adjustment: Brushless motorized recipe-based can size changes via HMISensors & inspection: Photoelectric/inductive lid presence, X-ray fill level (min/max), transparent label photocellSafety: Stainless steel guards with interlocks, wire-mesh fencing, emergency protections, IP55 stainless enclosure on the inkjet coderClean operation: Ionized air cleaning with HEPA filter; undercover CO₂ injection and bubble breaker; dummy cans for CIP (up to 80°C)Production Line Integration CapabilitiesDesigned as a coherent packaging machinery set, this used bottling line supports inline operation from depalletizing through filling, inspection, coding, labeling, and discharge. Format changes between 0.33L and 0.44L are rapid thanks to automated adjustments and dedicated change parts.... Codjzmgccopfx Abtehb

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: B5.00172.1454, total width: 850 mm, total length: 2,000 mm, total height: 1,450 mm, pressure: 340 bar, operating pressure: 340 bar, type of input current: three-phase, overall weight: 1,700 kg, rotational speed (max.): 1,500 rpm, empty load weight: 1,700 kg, power: 147 kW (199.86 HP), year of last overhaul: 2026, pump capacity: 239 l/min, Equipment: type plate available, Stationary high-pressure pump unit Hammelmann HDP 172 mounted on a base frame. Similar, but not Kamat, Uraca, or Woma. Pump type: HDP 172 Csdpfxeyablmj Abtehb Operating pressure: 340 bar Flow rate: 239 l/min Drive speed: 1500 rpm Drive power: 147 kW with SIEMENS 160 kW 3-phase motor, IP55 Dimensions (LxWxH): approx. 2000x850x1450 mm Weight: approx. 1700 kg Year of manufacture: 2015 Condition: New piston seals installed and valves inspected in January 2026. In very good used condition.

Condition: excellent (used), Year of construction: 2018, electric motor, three-phase motor Cedpszdq Tyjfx Abtshb -Manufacturer: Weg, electric motor type W20-250S/M-04 -Power: 55 kW -Speed: 1485 rpm -Shaft: Ø 65 x 135 mm -Design: B3 -Protection rating: IP55 -Quantity: 1 electric motor available -Price: per piece -Dimensions: 920/920/H505 mm -Weight: 422 kg

Condition: like new (used), 1 pc. Dassler high-pressure centrifugal fan is for sale single inlet with sheet steel housing with the following performance parameters: condition: new, unused type: DCAS-852-2T-10 Codpfxsyx Tbro Abtehb suction: DN 280 power: 7.5 kW air volume: approx. 4300 m3 / h speed: 2800 rpm air temperature conveyed: -20 to + 120 ° C motor: insulation class F / protection class IP55

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: C3.00202.1212, total width: 1,000 mm, total length: 2,000 mm, total height: 1,450 mm, pressure: 340 bar, operating pressure: 340 bar, type of input current: three-phase, overall weight: 1,740 kg, rotational speed (max.): 1,500 rpm, empty load weight: 1,700 kg, power: 147 kW (199.86 HP), year of last overhaul: 2026, pump capacity: 254 l/min, Equipment: type plate available, Stationary high-pressure pump unit Hammelmann HDP 202 mounted on a base frame. Similar but not Kamat, Uraca, or Woma. Pump type: HDP 202 Operating pressure: 340 bar Flow rate: 254 l/min Drive speed: 1500 rpm Drive power: 157 kW with SIEMENS 160 kW 3-phase motor, IP55 Dimensions (LxWxH): approx. 2000x1000x1450 mm Weight: approx. 1740 kg Cedpfsyacaxox Abtehb Year of manufacture: 2023 Condition: In January 2026 new piston seals were installed and valves checked. In very good used condition.

Condition: good (used), Year of construction: 2019, 16 ton crane trolley, Kone, CXT, (chassis, rope, hook) – used - : Price ex-location: now only €5,000 instead of €12,500 (net), dismantled and loaded! Not included in the sale: bridge, remote control, coil hook. Manufacturer: Kone Year of manufacture: 2019 Reference no. 200967176/10 Order no. 4501376439 Electric wire rope hoist Hoist type: CXT60410160SA5JDD0S Hoist serial number: 58704433 Load capacity: 16,000 kg Lifting height: 10.5 m Drum pulling force: - Rope length: - Csdpfx Aey Iv D Usbtshb Classification: M5 Current consumption: 68.2 A Total output: 36.3 kW Hoisting motor Motor type: MF13XL200N260FA5132X-IP55 Serial number: 58202098 Power: 35 kW Gearbox type: GEN410NB000-D Lifting speed: 11.20/0.22 m/min Serial number: 58664786 Rope speed: - Inspections Operating voltage: 400 V, 50 Hz Control voltage: 48 V Serial number: - Control type: D2H overload SG Control cable - set load: 17,600 kg Circuit diagram: 200967176 Manufactured to IEC Travel drive Chassis motor type: MF06LA200-132F95001E-IP55 Serial numbers: 58531833, 58531836 Gearbox type: GES342PS3BO-A Serial numbers: 58657454, 58657451 Power: 0.65 kW Track gauge: 2,000 mm Overall height: approx. 65 cm Carriage type: M Wheel tread: 74 mm Flange width: - VFD serial no.: 37E43K2T18250130 Trolley travel speed: 32.0 m/min/- Original new price: approx. €20,000 Dismantling, including disconnection, will be professionally carried out by KONE. You will also receive the complete crane documentation and inspection book. Condition: good – very good Available: immediately Location: Niedernberg near Aschaffenburg Additional photos on request! Wiring diagram available as PDF, as well as operating manual, installation instructions, spare parts list, master data sheet, declaration of conformity, inspection book.

Condition: excellent (used), For sale: professional industrial pump ASTRA CM 50-125A, manufactured in Italy (Padova, Italy). The pump is in very good visual and technical condition. Robust construction designed for installations, water systems, and technological circuits. Codpfx Absyuqrfjtjhb Three-phase motor 5.5 kW, 2800 rpm, 400 V power supply. The pump is equipped with threaded connections. The unit has been regularly serviced – inspection sticker by DPT is present. Very durable equipment – Italian production, heavy-duty cast iron construction. Technical data • Manufacturer: ASTRA (Padova, Italy) • Model: CM 50-125A • Type: three-phase electric pump • Motor power: 5.5 kW • Power supply: 230 / 400 V • Speed: 2800 rpm • Maximum capacity: 1200 l/min • Head: 25 m • Insulation class: F • Protection rating: IP55 Shipping or personal collection possible. The listed price is for 1 piece.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 2 h, New variable screwcompressor ALMIG Variable XP 75 Controller: Aircontrol Premium Year 2025 Hours: 2 h new condition, available short.(1 week) Technical specifications: type: Variable XP 75 Possible operating pressures of the system: 5 to 13 bar Quantity delivered at 5 bar : 3.85 to 14.59 m³/min Codpfx Aszm Nx Tebtehb at 6 bar : 3.84 to 14.53 m³/min at 7 bar : 3.83 to 14.48 m³/min at 8 bar : 3.82 to 13.38 m³/min at 9 bar : 3.79 to 12.30 m³/min at 10 bar : 3.76 to 12.23 m³/min at 11 bar : 3.71 to 10.89 m³/min at 12 bar : 3.67 to 10.82 m³/min at 13 bar : 3.58 to 10.32 m³/min Installed power: 75 kW Protection class / Insulation class Drive motor: IP55 / ISO F Operating voltage / frequency: 400 V / 50 Hz Sound pressure level (DIN 45635 T13) : 76 dB (A) Compressed air connection: G 2" Dimensions and weight Length : 2180 mm Width : 1330 mm Height : 1850 mm Weight : 2025 kg Visit our store. We´ve got a lot of compressors and dryers on stock.