Used Ip55 for sale (328)

Condition: used, TERMIK Range Gas or diesel-powered 5 decks, 15 openings Usable area: 23.10 m² With integrated loading elevator Maximum power: 128,000 kcal/h, equivalent to 149 kW Forced hot air circulation 2 fans on the 180 series High-efficiency heat exchanger Rcedpfxezyaktj Airoh Heat distributed between ceiling and floor Independent steam generator per chamber Steamers located near the combustion cylinder Steamers’ power consumption: 1.5 to 2 kW Standard steam generator: 4 kW Stainless steel and tempered glass doors Removable doors for cleaning Overpressure valves on each chamber Electrical panel with IP55 protection Steamers accessible from the front Internal dimensions: 1850 x 2500 mm External dimensions: 2485 x 3650 mm Loading clearance: 3060 mm Used Tagliavini CT 185/L cyclothermic oven – 23.10 m² baking area General Overview The Tagliavini TERMIK CT 185/L is a professional, multi-deck cyclothermic oven designed for bakery operations that require a large baking area and even heat distribution. This configuration features 5 baking chambers for a total usable area of 23.10 m², with internal dimensions of 1850 x 2500 mm. The cyclothermic principle is based on the forced circulation of heat from the combustion chamber. In the 180 series, two fans direct the heat flow through the ducts surrounding the chambers, achieving a balanced temperature from the bottom to the doors. The CT 185/L can operate on gas or fuel oil/diesel.

Condition: excellent (used), For sale: a Lenze GSN04-1NHAR worm gear motor with a WEG AL71-4 three-phase motor, 0.37 kW. The unit is fully functional, tested, and ready for operation. The gear motor is in good technical and visual condition. Only normal signs of wear are visible, consistent with its use. Thanks to its compact and robust design, it is ideally suited as a drive in industrial machines, conveyors, production lines, packaging equipment, and automation systems. The GSN04 series is a range of compact gear motors designed for applications requiring reliable power transmission. Technical data: Gearbox manufacturer: Lenze Gearbox model: GSN04-1NHAR Motor manufacturer: WEG Motor type: AL71-4 Power: 0.37 kW Power supply: 3× 220–240 V Δ / 380–415 V Y, 50 Hz Motor speed: 1370 rpm Output speed: 140 rpm Gear ratio: i = 10 Output torque: 22 Nm Protection class: IP55 Insulation class: F Rcsdpfx Aijz Snggjroh Operating mode: S1 (continuous operation) The scope of supply includes exactly what is shown in the pictures.

Condition: excellent (used), For sale: Lenze GSN04-1NHAR geared motor with a three-phase Lenze/WEG DERA071-32 motor, 0.37 kW. The unit is 100% functional, tested, and ready for operation. The technical condition is very good. Visually, it has normal signs of use resulting from operation, as shown in the pictures. Thanks to its compact design and worm gear, the geared motor is ideally suited as a drive for conveyors, feeders, production machines, packaging machines, mixers, and many other industrial devices. Technical data: Gearbox manufacturer: Lenze Gearbox model: GSN04-1NHAR Motor manufacturer: Lenze / WEG Motor type: DERA071-32 Power: 0.37 kW Supply: 3×220–240/380–415 V AC Frequency: 50 Hz Motor speed: 1370 rpm Output speed: 133 rpm Torque: 22.6 Nm Gear ratio: i = 10 Protection class: IP55 Insulation class: F Rjdpfx Aez Sni Ijirech Duty type: S1 Condition: 100% functional – tested. Normal signs of use visible on the housing. Sold exactly as shown in the pictures.

Condition: excellent (used), For sale: a Lenze GSN04-1NHAR geared motor with a three-phase Lenze DERA071-12 motor, 0.25 kW. The unit is 100% functional, tested, and ready for operation. The technical condition is very good. Visually, it has normal signs of use resulting from operation, as shown in the photos. This geared motor with a worm gear is ideally suited as a drive for conveyors, feeders, production machines, packaging machines, mixers, and many other industrial devices. Technical data: Gearbox manufacturer: Lenze Rsdsz Snklepfx Airech Gearbox model: GSN04-1NHAR Motor manufacturer: Lenze Motor type: DERA071-12 Power: 0.25 kW Supply: 3×220–240/380–415 V AC Frequency: 50 Hz Motor speed: 1365 rpm Output speed: 186.6 rpm Torque: 11 Nm Gear ratio: i = 7.5 Protection class: IP55 Insulation class: F Duty cycle: S1 Condition: 100% functional – tested. Normal signs of use visible on the housing. Sold exactly as shown in the photos.

Condition: new, Year of construction: 2019, functionality: fully functional, power: 1,250 kW (1,699.52 HP), input voltage: 690 V, input frequency: 50 Hz, type of input current: three-phase, protection type (IP code): IP55, Siemens AC Motor Type: 1LA4500-6CM00-Z Design: IM1001-B3 Standard: IEC60034-1 Insulation Class: F Rodpfsxal Drjx Airoch Protection Class: IP55 Duty Type: S1 Input Voltage: 690 V Input Current: 2 x 640 A Power (Pn): 1250 kW RPM: 995 Power Factor: 0.85 Frequency: 50 Hz

Condition: ready for operation (used), Year of construction: 2003, operating hours: 25,794 h, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 6,500 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 12,000 W, number of axes: 3, This 3-axis MIKRON VCP 800 was manufactured in 2003. It features an X-axis travel of 800 mm, Y-axis travel of 450 mm, and Z-axis travel of 450 mm. The machine is equipped with a Heidenhain iTNC 530 control and a high-speed spindle capable of reaching up to 20,000 rpm. If you are looking to get high-quality machining capabilities, consider the MIKRON VCP 800 vertical machining centre we have for sale. Contact us for further details. • Spindle: • Type: Step Tec HVCS 212-S-12-1.7/20-2F-HSK-A63 • Tool holder: HSK-A63 (DIN 69893) • Torque: 63 Nm • Cooling: Water-cooled • Protection rating: IP55 • Insulation class: F • Table: • Dimensions: 1,050 × 590 mm • Maximum table load: to be confirmed • Feed/rapids: • Maximum feed rate: 15 m/min • Rapid traverse rate: 22 m/min • Tool magazine: • Capacity: to be confirmed Rcodpfsz D H E Aex Aireh • Max tool diameter (adjacent pockets occupied): 90 mm • Max tool length: to be confirmed • Max tool weight: to be confirmed • Electrical: • Supply: 3 × 400 V + PE, 50 Hz • Control voltage: 24 V DC • Fuse protection: 35 A • Total connected load: 16 kW • Power factor: cos φ 0.9 • Sound pressure level: 75 dB(A)

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: V302591-20, pressing force: 130 t, filling opening width: 1,620 mm, filling opening length: 972 mm, bale width: 1,100 mm, bale height: 1,100 mm, overall weight: 41,000 kg, pressure: 280 bar, oil tank capacity: 2,450 l, power: 150 kW (203.94 HP), BOA Impress D130 B 110 with side compression – used baling press, professionally maintained Are you looking for a powerful, reliable, and readily available baling press? Then this BOA Impress D130 B 110 with side compression is an excellent opportunity. We acquired this press as a trade-in. The previous owner, a customer in England, used this BOA for years and has now opted for a new BOA system. This speaks volumes about the trust in the machine, the brand, and the service provided. The press was maintained throughout its entire service life by our own BOA service team in England. This maintenance was always carried out with great care, resulting in a well-documented maintenance history. The press was dismantled in working order and is currently in our storage facility, where it can also be inspected. Before delivery, the machine will undergo a technical check-up. Any parts that need to be replaced will be replaced by us, so that the press can be offered in good condition. Why this BOA D130 B is interesting The BOA Impress D130 B 110 is a heavy-duty industrial baling press with high pressing force, suitable for intensive use and high capacities. Thanks to the side compression and robust design, this is a strong solution for companies that want to efficiently process large volumes of material. Technical specifications Type: BOA Impress D130 B-5V-1.6 Design: D130 B 110 with side compression Hydraulic power: 110 kW Main pumps: 2 × 55 kW Counter-pressure pump: 5.5 kW Filter pump: 5.5 kW Oil cooler: 4 kW Operating voltage: 400 V / 50 Hz Insulation class: IP55 Hydraulic working pressure: 280 bar Oil tank capacity: 2,450 liters Pressing force: 1266 kN / 126 tons Specific pressing pressure: 10.5 kg/cm² Press stroke: 2900 mm Chamber size: 1100 × 1100 mm Rcedpoy Tnzcofx Airoh Press chamber volume: 3.51 m³ Bale length: adjustable, approximately 1400 mm Bale weight: up to approximately 1200 kg, depending on the material Number of binding wires: 5 vertical / 5 horizontal Filling hopper: 1620 × 972 mm Machine weight: approximately 45 tons Noise level: < 85 dB(A) Average cycle time under load: 20 seconds Availability: The machine is currently in our storage facility and can be viewed by appointment. Because the press is from our own trade-in stock, was dismantled in working order, and maintained by our own service team, we can provide a good overview of the technical condition and history. A robust, used BOA press with a known history, professional service record, and a check-up before delivery.

Year of construction: 2009, condition: ready for operation (used), Throughput: approx. 150 jars/min, foreign body detection capability for glass fragments: from approx. 3 x 3 x 3mm, metal: from approx. 1 x 1 x 1mm, stones and bones: from approx. 3 x 3 x 3mm, suitable for glass containers, tinplate cans, beverage cartons (carton bricks), and plastic containers, typical false rejection rate per 10,000 inspected products: approx. 7, maximum container diameter: 155mm, maximum inspection speed: 100m/min, standard sensor speed: 45m/min, sensor height: 256 to 410mm, pixel size: 0.4 x 0.4 to 0.8 x 0.8mm, rejection system: electropneumatic cylinder, operator interface: 17 inch touchscreen, remote access: Ethernet or modem, frame material: AISI 304 stainless steel, sensor protection class: IP55, power supply: 3 phase + protective earth (3PH + GND), operating voltage: 400V, machine power consumption (2 motors): 3kW, processing unit power consumption: 500W, high voltage generator: 0.3 to 1kW, electrical cabinet protection class: IP55, X-ray radiation: 0.1µSv/h, compressed air operating pressure: 4 to 6bar, air consumption: 50Nl/min, infeed and outfeed height: 1305mm, screen and operating height: 1070mm, length: 2890mm, width: 1000mm, height: 2525mm, weight: 1.3t. Equipped with a reject system for contaminated containers and a conveyor belt. The machine was in operation until 2024. Inspection on site is possible. Rsdpfxjzhw S Rs Airsch

Condition: like new (used), Year of construction: 2009, ABB AMI 630L6A BAFH – 4800 kW (4.8 MW) electric motor – 2009 – UNUSED For sale: an industrial ABB AMI 630L6A BAFH electric motor with a power rating of 4800 kW (4.8 MW), manufactured in 2009 by ABB Oy in Helsinki, Finland. The motor is unused and comes from stock, preserved in very good visual condition. The unit has the original manufacturer's nameplate and a complete housing with a cooling system. The motor is designed for the most demanding industrial applications, requiring high power, high reliability, and continuous operation. Technical data: * Manufacturer: ABB Oy, Finland * Model: AMI 630L6A BAFH * Year of manufacture: 2009 * Condition: unused * Power: 4800 kW / 4.8 MW * Voltage: 3300 V * Current: 988 A * Rotational speed: 992.6 rpm * Frequency: 50 Hz * Power factor: 0.88 Rcsdpfx Aijz N Tddsrsh * Number of phases: 3 * Winding connection: delta (D) * Insulation class: F * Protection class: IP55 * Operating mode: S1 – continuous duty * Cooling system: IC611 * Mounting method: IM1001 * Power supply: ABB ACS 1000 frequency converter * Weight: 14,250 kg * Serial number: 4598458 * Identification number: 323FN400M01 * Standard: IEC 60034-1 Application The motor can be used in large industrial installations: * High-performance industrial pumps * Compressors * High-power industrial fans * Power industry * Steel and metallurgical plants * Chemical and petrochemical industry * Mining and extraction industry * Drives for heavy industrial machinery Condition of the unit The motor is unused and has been stored since purchase. The unit is in very good visual condition. Only minor signs of storage and transport are visible. Includes an integrated cooling system and connection elements. Due to the long storage period, it is recommended to check the condition of the insulation, bearings, and lubrication system before the first start-up. Transport and sale The unit weighs 14.25 tons. Professional loading and transport can be arranged within Poland and throughout Europe. Additional information and photos are available upon request. Please contact us for a price quote.

Condition: used, Year of construction: 2023, functionality: fully functional, SIEMENS 3-MOT 1CV3282B (2023) The Siemens 1CV3282B is an industrial three-phase asynchronous electric motor from the SIMOTICS SD (Severe Duty) series, featuring a cast-iron frame. It is designed for demanding operating conditions. [1] Its basic specifications are: Redpfx Aijzr H U Ajrech • Power: 90 kW at 50 Hz (125 HP at 60 Hz) • Speed: 4-pole (approximately 1485 rpm at 50 Hz) • Frame size: 280 M • Efficiency: IE3 class (Premium Efficiency) • Degree of protection: IP55 (dust and splash-proof) • Construction: IMB3 (foot-mounted) • Weight: Approximately 670 kg 1LE1503-2DB29-0FB5-Z is the precise order number (MLFB code) for the Siemens (Innomotics) SIMOTICS SD series cast-iron electric motor.

Year of construction: 2008, condition: excellent (used), Applications : - Water supply, irrigation. - Heating, ventilation and air conditioning. - Pressure groups, cooling. - Water treatment. Advantages: - Easy to install and maintain. - Compact solution for residential and small collective use. - Guaranteed water supply in case of failure of an electric pump. - Assembly, adjustment and testing of the unit carried out directly at the factory. - Flexible operation due to variable speed. Features : - Maximum flow rate: 320 m³/h. - Delivery height: 160 m. - Power range: 2x0.25 kW. - Operating pressure: 10/16 bar. - Ambient temperature: 0°C - +40°C. - Liquid temperature : -10°C - +60°C. - Hydrovar®HVL variable speed drive. Motor : Rcjdpfx Aemih Aaeirjh - Power supply: 1 x 230V. - Insulation class: F (155°C). - Protection: IP55. Materials : Pump body and impellers: Stainless steel 304. Collectors: AISI 304 stainless steel. Non-return valves: Brass. Certified for use in drinking water production.

Condition: new, Year of construction: 2022, operating hours: 5 h, functionality: fully functional, overall weight: 290 kg, total length: 1,430 mm, total width: 660 mm, total height: 1,250 mm, fuel type: electric, volume flow: 15 m³/h, noise level: 54 dB, protection type (IP code): IP55, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Scroll compressor with integrated compressed air treatment system Manufacturer: AIRPOL (Poland) - 2022 Model: SRKT 2 The compressor delivers oil-free air, dried to a pressure dew point of +3°C. Operating hours: 5h Overpressure: 0.8 MPa Capacity: 14.4 m³/h Dimensions (L x W x H): 1430 x 660 x 1250 mm Compressed air connection: G½ Weight: 290 kg Tank capacity: 240 litres Ambient temperature range: +5 to +40°C Cooling air requirement: 400 m³/h Compressed air temperature: approx. 15°C above ambient temperature Refrigerant: R134A - 0.35 kg Noise level: 54 dB(A) Drive transmission: belt drive Nominal motor power: 2.2 kW Motor energy efficiency class: IE3 Motor protection rating: IP55 Power supply: 400/3/50 V/Ph/Hz Recommended supply cable cross-section: 5x1.5 mm² Protection: A16 Dryer pressure dew point: +3°C Compressed air purity class according to ISO 8573.1: 1.4.1 Microprocessor controller: MS-286 Airpol Power Control Rcsdpsxyhdbjfx Aireh

Condition: used, Pinpoint nozzle size: 40µm, min. bend radius: 65mm, cartridge capacity: 825ml, housing material: 316 stainless steel, protection rating: IP55, operating temperature: 5-45°C, operating interface: Membrane keypad (membrane touch buttons), control system: Integrated control unit, printhead type: SureStart, relative humidity: 10-90%, power consumption: 200VA, dimensions: 245x475x725mm, weight: 36kg, an on-site inspection is possible. Redpo Adt Evofx Airoch

Condition: ready for operation (used), functionality: fully functional, rotational speed (max.): 741 rpm, input voltage: 400 V, input frequency: 50 Hz, input current: 633 A, type of input current: three-phase, overall weight: 2,980 kg, Name: AC-LV squirrel-cage motor, efficiency-class 2 Manufacturer: EMZ Type: AKR 400-06-033 Rated output [kW]: 355 Duty type: S1 Rated speed [rpm]: 7410 Number of poles: 8 Direction of rotation: Both Rated voltage [V]: 400 Voltage fluctuations [+/- %]: 5 Connection: Delta Rated frequency [Hz]: 50 Rcsdpfx Aiezl Dduoreh Frequency fluctuations [+/- %]: 2 Rated current [A]: 633 Locked rotor current [Ia/In]: 6.5 Type of construction: B3 Degree of protection: IP55 Cooling method: IC411 Frame material: Cast iron Insulation class: F Temperature-rise: B Efficiency [%]: 95.2 Efficiency 3/4,2/4,1/4 [%]: 95,4 / 92,4 Efficiency class: IE2 Power factor [cos phi]: 0.85 Power factor 3/4,2/4,1/4 [cos phi]: 0,83 / 0,74 Rated torque [Nm]: 3424 Locked rotor torque [Ma/Mn]: 1.4 Breakdown torque [Mk/Mn]: 2 Moment of inertia J [kgm˛]: 21,2 Number of starts [cold/warm]: 3/2 Ambient temperature: > -20°C < 40°C Altitude above sea level: < 1000m Bearing design: Antifriction bearing Bearing design [d-end/nd-end]: 6326-C3 / 6326-C3 Fixed bearing: Nd-end Regreasing device: Yes Type of shaft: Cylindrical Shaft-dimensions [mm]: 110 X 210 Shaft-height [mm]: 400 Position of terminal box: On top Cable entries: 7x M63x1,5 Winding protection: 2x 3PTC Bearing protection: 1x PT100/bearing Heating elements: 1x200W

Condition: ready for operation (used), Anti-spark centrifugal extractor fan Cardboard filters “Paint-Stop” filter Electric panel with IP55 protection class Rcedpfx Aiew Rpxcereh Ceiling light with IP65 protection class Emergency push-button Discharge hopper

Condition: excellent (used), functionality: fully functional, • Brand: WEG • Type: BF6355L4 08 • Power: 355 kW (approximately 480 hp) • Speed: 1490 rpm (4 poles) • Voltage: 400 V / 690 V – 50 Hz • Current: 632 A (400 V) / 364.9 A (690 V) • Efficiency: 96.5% • Protection rating: IP55 • Insulation class: F • Duty cycle: S1 • Mounting: flange (IM 3011) • Weight: approximately 2,110 kg Rcsdpfxs Agd S Aj Airoh • Equipped with a multi-groove pulley Please submit a reasonable offer.

Year of construction: 2022, condition: used, A new, unused EVG Lufttechnik high-temperature centrifugal fan is offered. Volume flow: 245m³/h, max. speed: 5270rpm, max. medium temperature: 500°C, total pressure difference: up to 6172Pa, motor power: 1.5kW, voltage: 230/400V, efficiency class: IE3, degree of protection: IP55, weight: approx. 165kg. With Motovario electric motor and V-belt drive. Documentation fully available. Rcodpez Dki Esfx Airsh

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: API628950, Technical characteristics: Core Specifications Attribute Motor Power Max Operating Pressure Free Air Delivery (FAD) Cooling Type Noise Level Drive Type Integrated Dryer Voltage Dimensions (L×W×H) Weight Performance & Features Elektronikon® Touch Controller: Advanced microprocessor for monitoring, control, and remote access. RDX Synthetic Oil: Long-life lubrication for reduced maintenance. Energy Efficiency: Specific power as low as 18.9 kW/100 CFM, depending on load. Integrated Refrigerated Dryer: Ensures clean, dry air with minimal pressure drop. Oil-Water Separator: Built-in for environmental compliance and air purity. Reliability & Maintenance IP55-rated motor: Dust and water-resistant for harsh environments. No-loss condensate drain: Prevents compressed air waste and reduces downtime. Sound-insulated bodywork: Minimizes noise and vibration Machine status: WORKING Rjdpjxx Snbefx Airech

Condition: used, Year of construction: 2023, functionality: fully functional, power: 11 kW (14.96 HP), Siemens IEC three-phase asynchronous motor 3~Mot 1AV3162B 1LE1003-1DB23-4AB4 - 11kW Year of construction 2023 SIMOTICS GP MOTOR TYPE: 1AV3162B Low-voltage motor, IEC squirrel-cage rotor, self-cooled, IP55 thermal class 155(F) to 130(B) aluminum housing Premium Efficiency IE3, 4-pole * Frame size 160M, * 11kW (50Hz) 12.6kW (60Hz) Standard color RAL 7030, 3 AC 50Hz 400VD/690VY * 3 AC 60Hz 460VD IM B3 3 PTC thermistors for disconnection (2 terminals) Top terminal box Weight: 83kg We offer the low voltage motor. ⭐︎ Condition: Very good (used) The heating circuit pump is used but ready for use. The pump worked perfectly until it was removed a few weeks ago. Please refer to the rating plate for data. Scope of delivery as shown Inspection before purchase is possible and expressly desired. Rcodpfx Aeu Eugzsirsh All our items are dismantled, cleaned and visually inspected for damage by our company's expert staff prior to sale. Please refer to the description and pictures for all relevant item data / information. All information is given to the best of our knowledge and belief, the goods offered are sold as described and inspected. Shipping possible but buyer pays shipping costs.

Year of construction: 2025, condition: new, 5 × Robuschi ES105/3.5-P Oil-Free Rotary Lobe Blower Packages – New and Unused Five complete Robuschi blower packages for low-pressure air applications, including aeration in wastewater treatment plants. Equipped with weatherproof stainless steel enclosures and rain hoods, suitable for outdoor installation. Specifications and equipment Quantity: 5 complete packages. Manufacturer: Robuschi / Ingersoll Rand. Model: ES105/3.5-P. Operating principle: oil-free positive displacement blower with three-lobe rotors. Medium: atmospheric air. Electric motor: WEG, 55 kW per package. Power supply: three-phase, 400 V, 50 Hz. Motor: 4-pole, approximately 1,480 rpm. Efficiency class: IE3. Motor protection: IP55. Insulation class: F. Motor mounting: B3. Belt drive with belts, pulleys and transmission guard. Integrated baseframe with discharge silencer. Inlet filter silencer. Non-return valve and overpressure relief valve. Stainless steel acoustic enclosure with rain hoods and ventilation. Rsdpfxe Afu U Ue Airjch Motor heater: 230 V. IFM switch kit. Discharge pressure gauge and vacuum gauge for filter monitoring. Design duty points according to the documentation – per blower 2,150 Nm³/h at 375 mbar gauge pressure. 1,760 Nm³/h at 375 mbar gauge pressure. 1,460 Nm³/h at 570 mbar gauge pressure. 1,205 Nm³/h at 570 mbar gauge pressure. The documentation also includes a selection sheet showing a different operating point. Final capacity and control arrangements should be confirmed for the intended application. Condition and reason for sale The packages were purchased new less than twelve months ago and remain unused in their original packaging. They are now surplus to operational requirements. All five units are stored in their original packaging. Technical documentation available. Images taken from the documentation are for illustration and may differ from the offered configuration.

Condition: excellent (used), For sale: professional industrial pump ASTRA CM 50-125A, manufactured in Italy (Padova, Italy). The pump is in very good visual and technical condition. Robust construction designed for installations, water systems, and technological circuits. Three-phase motor 5.5 kW, 2800 rpm, 400 V power supply. The pump is equipped with threaded connections. The unit has been regularly serviced – inspection sticker by DPT is present. Very durable equipment – Italian production, heavy-duty cast iron construction. Technical data Rcedpfsz Slq Nex Airsh • Manufacturer: ASTRA (Padova, Italy) • Model: CM 50-125A • Type: three-phase electric pump • Motor power: 5.5 kW • Power supply: 230 / 400 V • Speed: 2800 rpm • Maximum capacity: 1200 l/min • Head: 25 m • Insulation class: F • Protection rating: IP55 Shipping or personal collection possible. The listed price is for 1 piece.

Year of construction: 2024, condition: new, functionality: fully functional, TECHNICAL DATA • Designed for beside the press operation (injection and blow moulding). Rcsdoz Sqc Aspfx Airsh • Six standard models, over 50 versions available. • Two rotor design available. • Slow rotor speed (155-275 RPM). • Standard screen in stainless steel. • IP55 control cabinet and electrical motor. • Quick opening and easy cleaning. • Noise level largely within European norms EN 12012-1. Utmost application flexibility CMG launches a new series of small size beside the press granulators with connotates of high caliber. The very innovative and unique attributes of such new series are several and all contribute to obtaining the highest degree of productivity, regrind quality (homogeneous particle dimensions and absence of dust), efficiency of operation and the best application flexibility. In its standard configuration the G17 granulators are applicable to processes of injection moulding and of blow moulding. In the ET1 or ET2 configuration, they are suitable for extrusion applications. The granulation capacitiy range is from 5 kg/h up to 90 kg/h. Precision cutting The new CMG series of G17 granulators is designed to obtain the most homogeneous regrind shape and dimensions, along with little to no presence of dust. One additional very unique benefit of this new line is the ability to produce regrind with very small dimensions. The great advantage of dimensionally small regrind is the possibility to add higher percentages to the virgin material with no influence to the quality of the finished product. Small capacity systems, injection moulding machines or extruders, are equipped with small diameter plastification screws, unable to process granules with dimensions exceeding those of the virgin granule. The G17 granulators produce rigrind which is dimensionally comparable to the virgin pellet.

Condition: used, VETTER Krantechnik PROFI Crane System / Two-Rail Portal Crane VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge, manual traversing unit, and electric chain hoist For sale is a used VETTER PROFI crane system from Vetter Krantechnik GmbH. The system is suitable for assembly work, production, mechanical engineering, maintenance, logistics, as well as the safe lifting and positioning of heavy loads. Technical Data Manufacturer: Vetter Krantechnik GmbH Type: P300 Design: PROFI crane system as a two-rail portal with crane bridge Year of construction: 2020 Load capacity: 1,600 kg Span of crane bridge: 5,100 mm Support distance L: 5,570 mm Support distance B: 5,100 mm Beam length: 5,470 mm Overall dimensions of system: approx. 6,020 x 5,800 mm Bottom edge of crane bridge: 4,145 mm Bottom edge of portal beam: 4,567 mm Overall height: 4,905 mm Classification according to EN 15011: HC2 / S2 Steel structure group: 18/30/30 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Redpfxjzgrzqe Airjch Type: SIXX8AF Year of construction: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW FEM class: 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Traversing unit / trolley Manufacturer: Vetter Krantechnik GmbH Type: SiCO-HF 2000 A Variant A Load capacity: 2,000 kg Beam width: 66 - 220 mm Weight: 17 kg Equipment Two-rail portal crane system Crane bridge Electric chain hoist SIXX8AF Manual traversing unit SiCO-HF Load hook Control / operating element Main switch Steel supports and beam structure Documentation / test book available Accessories as shown in the pictures Application areas Mechanical engineering Assembly work Production Maintenance Workshop operation Material handling Logistics Based on experience, the total weight of the system is approximately between 2,000 and 3,500 kg, depending on the installed steel profiles and foundation plates. Condition Used Optical condition as shown in the pictures System was assembled and in operation Test book and documentation available Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual traversing unit SiCO-HF Support and beam structure Control / operating elements Documentation / test book Accessories as shown in the pictures The machines, tools and other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or forwarding is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: new, Year of construction: 2023, operating hours: 150 h, Used Kaeser Booster Compressor N253-G (9/40) without start control / star-delta connection Year of Manufacture: 2023 Operating Hours: 150 hrs Equipment Rodpozaaqzofx Airsch - Compressed air aftercooler design: finned-tube type - Oil supply: via oil pump - Oil pressure monitoring - Oil pressure and discharge temperature indication Technical Data Inlet pressure: 9 bar(g) Final pressure: 40 bar(g) Capacity at 40 bar: 1.74 m³/min Minimum ambient temperature: 2 °C Maximum ambient temperature: 40 °C Compressor block speed: 1,135 rpm Number of cylinders: 2 Drive motor rated power: 11.0 kW Motor efficiency class: IE3 Motor protection class: IP55 Electrical supply: 400 V / 3 Ph / 50 Hz Sound pressure level: 76 dB(A) Compressed air inlet connection: G 3/4" Compressed air outlet connection: G 1/2" Visit our always have a large selection of new and used compressors in stock!

Condition: used, Year of construction: 2024, EMOD FHKFIE3 450L/6C Industrial Electric Motor – 800 kW Heavy-duty industrial electric motor suitable for variable speed/frequency converter applications. Technical specifications: Manufacturer: EMOD Type: FHKFIE3 450L/6C Motor No.: 8830664 Year: 2024 Rated power: 800 kW Rated voltage: 660 V Δ Rated frequency: 50 Hz Rated speed: 995 rpm Rated current: 850 A Power factor: cos φ 0.85 Efficiency class: IE3 Efficiency: 95.8% Protection class: IP55 Duty cycle: S1 Weight: 6,600 kg Standard: EN 60034 Temperature monitoring: PT100 Variable speed operation: 5 Hz – 99 rpm 50 Hz – 995 rpm 90 Hz – 1,790 rpm Frequency range: 5–90 Hz Equipped with a separate forced ventilation motor: EMOD FHEIE3 FOL100LA/4 3.0 kW 400 V 50 Hz 1,445 rpm IP55 Redpfx Aoz Dh Rmoirech The motor is industrial surplus and is offered in its present condition. Sold as-is, without warranty, and without the possibility of claims.