Used Jung F 50 for sale (138)

Condition: used, Technical data for the pallet racking system: Racking system: Jung Heinrich Type: Esmena Technical data for installation: Number of rack rows: 01 pcs. Length per row of shelves: approx. 57,598 mm Number of bays / row of shelves: 13 units of 3,610 mm each Number of levels plus floor level: 02 pcs. The scope of delivery includes 14x pallet rack uprights, used Material color: blue Upright profile dimensions: P 76.2 mm Incl. cross and diagonal braces, base plates The uprights are pre-assembled ( bolted framework ) 2,500 mm high 1,100 mm deep 52x pallet rack beams, used Material color: yellow Box profile: 145 x 55 mm Beam type: GNA145x55SEG5 Agraffe: 5 HK (hooks) Clear width: 3,610 mm Max. load per truss pair 3,000 kg with evenly distributed load 104x locking pin, used Material color: orange For securing the longitudinal beams against unintentional lifting out 56x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 28x shim plate, used Crodpfotxbipjx Af Aod Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm General information about the item: This item is only offered for collection. Any other desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Notice: No screw material included. Technical data for the extension lugs: Manufacturer: Jung Heinrich Type: MPB Included in delivery are 02x extension lugs, used Cjdpfx Asn Sm Dtef Aerd total height: approx. 320 mm total width: approx. 110 mm inner width: approx. 102 mm f. Frame profile width: approx. 100 mm Depth: approx. 50 mm material thickness: approx. 4,00 mm hole spacing i. d. depth: approx. 50 mm hole grid i. d. width x height: approx. 60 x 50 mm Drill hole Ø: approx. 10 mm Material color: blue Weight | pc.: approx. 1,860 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a dispatch of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Technical data for the extension plates: Manufacturer: Jung Heinrich Type: MPB Included in the scope of delivery: 02x extension plates, used Overall length: approx. 400 mm Overall width: approx. 129 mm Internal width: approx. 121 mm Suitable for frame profile width: approx. 120 mm Depth: approx. 49 mm Material thickness: approx. 4.00 mm Hole spacing in depth: approx. 100 mm Hole spacing in width x height: approx. 85 x 100 mm Borehole diameter: approx. 10 mm Material color: blue Weight / piece: approx. 2.59 kg Note: Cjdpeipt Ddefx Af Ajrd No screws or fasteners are included in the scope of delivery.

Condition: good (used), We are offering a used pallet racking beam from the manufacturer Jung Heinrich for sale. Technical data for the pallet racking beam: Racking system: Jung Heinrich Type: Esmena The scope of delivery includes: Crjdpfx Aogy S I Ujf Ajd 01x Pallet racking beam, used Material color: orange Box profile: 85 x 40 mm Beam type: GN85x41 Clip: 5 HK (hooks) Clear width: 2,775 mm Max. load per beam pair: 1,023 kg with evenly distributed load 02x Locking pins, used Design: completely galvanized For securing the longitudinal supports against unintentional lifting out.

Condition: good (used), We are offering you a used shelf connector from the manufacturer Jung Heinrich for sale. Technical data for the shelf connector: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 01x Used shelf connector Material color: Sendzimir galvanized Shelf spacing: approx. 200 mm L-profile: approx. 85 x 40 mm Weight/piece: approx. 0.519 kg / piece 04x Hex head screws, M8 x 20 8.8 04x Hex nuts, M8 04x Washers, M8 Credod Tt Afjpfx Af Aed

Condition: good (used), Technical data for the pallet racking crossbeam: Racking system: Jung Heinrich Type: Esmena Included in the scope of delivery: 01x Pallet racking crossbeam, used Material color: yellow Box profile: 100 x 40 mm Crossbeam type: GN 100x40 Clip: 5 hooks Clear width: 4,005 mm Maximum load per pair of crossbeams: 1,000 kg with evenly distributed load 02x Locking pins, used Design: fully galvanized For securing the longitudinal supports against unintentional lifting out Csdpfx Aohinufof Aerd General information about the item: This item is offered for pick-up only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: refurbished (used), grinding length: 600 mm, grinding width: 200 mm, grinding length 600 mm Cjdpexal Hyjfx Af Aord grinding width 200 mm electromagnetic chuck 450×175 mm X-travel 660 mm Z-travel 225 mm grinding wheel size 250x25x51 mm Control Jung TouchScreen weight approx. 3000 kg

Condition: good (used), grinding length: 400 mm, grinding width: 150 mm, Table length 400 mm Table width 150 mm Grinding length 400 mm Grinding width 150 mm Execution: hydraulic Max. distance from table to spindle-centreline 350 mm Table speeds: stepless from .00 m/min Crodpfxsvga Sue Af Aod up to 0.0 m/min Automatic vertical feed: from 0.00 0 mm up to 0.013 mm Diameter of grinding wheel 00 mm Width of the grinding wheel 16 mm Grinding wheel speeds: from 800 rpm Voltage 50 Hz 3x 380 Volt Grinding spindle motor .30 HP Machine's weight about 900 kg Overall dimensions machine: Length 1300 mm Width 1 00 mm Height 1500 mm

Condition: good (used), Year of construction: 1990, Year of manufacture: 1990 Control type: CNC Cjdpfxei Hn U Us Af Ajrd Grinding length: 600 mm Grinding width: 200 mm Workpiece height: 375 mm Table load: 100 kg Grinding wheel dimensions: 250x25x51 mm Operating speed: 1-24 m/min Speed: 4200 rpm Drive motor: 5 kW Total power consumption: 7.5 kW Machine weight: approx. 3.2 t Space requirement: approx. 3.7 x 2.1 x 2.1 m

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, grinding length: 400 mm, grinding width: 150 mm, JUNG JF 415 Jung JF 415 Surface Grinding Machine with Flanges and Coolant Belt Filter * Table length: 400 mm * Table width: 150 mm * Maximum grinding length: 400 mm * Maximum grinding width: 150 mm Cjdpfx Afeytfbfo Aerd * Maximum workpiece weight: 75 kg * Distance spindle to table: 400 mm * Table speed: 1–24 m/min * Grinding wheel diameter: 25 mm * Spindle speed: 900 – 4500 rpm * Heidenhain digital readout * Year of manufacture: 1990, machine no.: 1566

Condition: defective spare-parts repository (used), Year of construction: 1999, machine/vehicle number: 3921, The machine is defective. Crjdpfx Afezcp Die Ajd The machine body and some of the attached components are in good condition. The machine will be sold as is, from its current location. Price upon request.

Condition: defective spare-parts repository (used), Year of construction: 1981, functionality: not functional, machine/vehicle number: 1661, The machine is defective. Crodpfozcpx Hex Af Ajd The machine body and some of the attached components are in good condition. The machine will be sold as is, from its current location. Price upon request.

Condition: used, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/2007, * BPW axles * Gergen GJ-SRK 30/75K roll-off body, year of manufacture 2007 * Unladen weight: 9,500 kg -----Internal vehicle number: 10757----Errors and prior sale excepted. WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. Crjdpfx Aewbyphjf Aed WhatsApp WhatsApp

Condition: used, Year of construction: 1991, grinding length: 500 mm, grinding width: 200 mm, Jung JA500-E Crjdpfxoy Iy Ukj Af Asd 1991

Condition: like new (used), Year of construction: 2016, Jung Supromatic JF 520 Jung Supromatic JF 520 Surface Grinding Machine, year of manufacture 2016, very good general overhauled original condition. The machine comes from the technical center of a renowned German mechanical engineering company. Technical Data: Year of manufacture: 2000 Technical Data: Clamping area (L x W in mm): 600 x 200 Grindable area (L x W in mm): 600 x 250 Max. magnet size mm: 500 x 200 Max. grinding wheel dimensions mm: 225 (250) x 25 x 51 Distance table/spindle center mm: Max. 400 Table longitudinal feed traverse m/min: 1 – 20 Creep feed mm/min: 0 – 500 Grinding spindle drive speed RPM: 800 – 4200 Power kW (with creep feed): 1.6 – 2.2 Machine weight approx.: 2.0 t Accessories and Equipment: Magnet Coolant system Machine feet Grinding wheel About the machine: We are offering a Jung Supromatic JF 520 surface grinding machine, year of manufacture 2016, in very good condition. The machine is, of course, fully operational and has completed approx. 50 operating hours since overhaul. All slides move very smoothly and evenly. Even at high speeds, the Jung runs very quietly. This newer generation of surface grinding machines is very user-friendly and can achieve surfaces with a low Rz value. Take the opportunity to inspect this machine under power on site and see for yourself its condition. Scope of overhaul: Mechanical scope: Mechanical basic overhaul Hydraulics Feed Lubrication Cross and vertical adjustment Grinding spindle Dresser Painting to new-machinery quality Geometric scope: Guideway grinding at the manufacturer’s facility (optional) Scraping of the guideways Column pull, measurement, possible re-scraping/grinding, adjusting with pressure stones, check and pattern guideways Setting of cross-grinding on spindle head Aligning the dresser Regrinding the table and magnet Machine acceptance to manufacturer's inspection checklist Electrical scope: Renewal of complete electrics, all limit switches and buttons Conversion of X-axis from cam switch to contactless limit switches New control cabinet RSF position display (2- or 3-axis readout) Holding force regulation for 24V or EP-magnetic chuck Codpsy Naw Iefx Af Aerd Control system modernization New auxiliary control cabinet (control panel top right) Thyristor control for grinding spindle drive Manual cylindrical dressing with head or side dresser (for Diaform operation)

Condition: reconditioned (used), Year of construction: 1978, functionality: fully functional, machine/vehicle number: 1025, Surface Grinding Machine Jung JF 520 DS No. 1025 with 1 Year Full Warranty - Geometrically overhauled; accuracy according to Jung standard less than 0.003mm - Electrical system tested, fully functional, relevant components replaced - Mechanics overhauled - All wear parts replaced - Color: reseda green; paint condition ok Equipment: Credpfx Asy D I Idjf Ajd Electro-permanent magnet 500x200mm including retrofitted Wagner control unit 756 2-axis digital readout for Y and Z axes Automatic feed for Y and Z axes Spark-out: 0 to infinite Y-axis with zero shutoff via stepper motor Roughing-finishing feed adjustment Manual hand dresser Infinitely variable spindle speed V-constant through wheel wear compensation Paper band filter unit, used, fully functional Max. grinding area: 600x250mm Max. load incl. magnet: 100kg Total weight: 2.5t

Year of construction: 1994, condition: used, workpiece diameter 350 mm workpiece weight 99999 kg workpiece height 240 mm total power requirement 7,5 kW weight of the machine ca. 2 t Seltene Gelegenheit: Teilüberholte Hochpräzisions-Rundtischflachschleifmaschine Mit komplett neuem Schaltschrank und neuer Steuerung mit BEMA Schleifsoftware Rundtisch-Durchmesser 380mm Magnet-Durchmesser 350mm Schleifscheibenabmaße 300x25x76,2mm Tischdrehzahl variabel max. 200U/min Schwenkwinkel des Tisches +-3 Grad Schleifspindeldrehzahl 800-4200 U/min Leistung Schleifspindelantrieb 5KW Verfahrweg quer max. 225mm Verfahrweg vertikal max. 480mm Abstand zwischen Magnetspannfutter und Spindelmitte, max. 390mm Automatischer Kopfabrichter AF65: zum zylidrischen Abrichten der Schleifscheibe im CD-Abrichtverfahren (Abrichten während des Schleifprozesses) Hierdurch werden Schleifzeiten reduziert und Abrichtzeiten eingespart. Der Abrichtbetrag wird automatisch kompensiert. Automatische Antasteinrichtung AT-R: bietet die Möglichkeit, mit der Schleifscheibe das Werkstück schnell und automatisch anzufahren. CNC-Steuerung mit höchstem Programmierkomfort Cedpoxbtl Tjfx Af Ajrd Unterschiedliche Schleifprogramme für -Pendelschleifen -Kurzhubschleifen -Einstechschleifen -jeweils eine oder mehrere Flächen in gleicher oder unterschiedlicher Höhe Ins Schleifprogramm integrierte Abrichtzyklen -Tischabrichten mit Einzeldiamant -Automatisch Geradabrichten -CD-Abrichten mit AF65 Minizyklen: -automatisches Antasten an das Werkstück -Positionieren einzelner Achsen -Abrichten Einsatzgebiet: Hochgenaue Planschleifarbeiten in der Mittel- und Großserienproduktion bzw. Einzelteilfertigung in zentrischer Aufspannung

Condition: used, Year of construction: 1980, grinding length 500 mm grinding width 200 mm workpiece height 290 mm Machine from the German Federal Institute of Physics and Metrology - geometrically revised - electrics tested, fully functional, relevant parts replaced - all wear parts replaced - colour light grey, colour condition good Equipment: - electro magnet 500x200mm - grinding spindle overhauled 2-axis display for Y and Z axes Automatic delivery for Y and Z axes Y-axis with zero shutdown Manual hand dresser Stepless speed for grinding wheel V-constant via disc wear Paper band filter system, used Max. height with 250 disc diameter 290mm max. grinding area 600x250mm max. load incl. magnet 100kg Warranty: 1 year on geometry and electronics, Germany-wide Delivery: ex works Shipping time: immediately Payment: before pickup Cjdpjwb Hygsfx Af Asrd Acceptance at our premises Shipping according to your specifications

Condition: good (used), Surface grinding machine, grinding machine -hydraulic horizontal surface grinding machine -Magnetic plate: 300 x 150 mm -Grinding wheel motor: 1.1 kW 2800 rpm -Water cooling with: filter -Grinding disc diameter: 200 mm Crsdpfx Aod A Idxsf Aod -Transport dimensions: 1470/1170/H1920 mm -Weight: 1090 kg

Condition: used, Year of construction: 1968, 450 mm Länge x-travel 500 mm Crodpoqwpwzofx Af Asd workpiece height . mm

Condition: excellent (used), Year of construction: 1996, JUNG JF 600 Surface Grinding Machine Jung JF 600 Year of manufacture 1996 Overhauled in 2018 Excellent CONDITION The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Data: Year of manufacture: 1993 / 2018 Table length: 600 mm Table width: 250 mm Axis movement: Longitudinal travel (X-axis): 600 mm Cross travel (Z-axis): 280 mm Maximum distance between table and spindle center: 500 mm Grinding length: 600 mm Table speed: Continuously adjustable from: 1 m/min to: 24 m/min Creep feed: from: 0.03 m/min to: 0.40 m/min Automatic cross feed: Continuously adjustable from: 0.010 mm/min to: 10000 mm/min Connection: 50 Hz 3x 380 Volt Grinding spindle motor: 9.5 kW Total power requirement: 13 kVA Machine weight approx.: 2500 kg Machine dimensions: Length: 2910 mm Width: 2320 mm Height: 1840 mm Additional equipment: Coolant system About the machine: Cjdoyxdaljpfx Af Ajrd For sale is a Jung JF 600 surface grinding machine. This universal surface grinder is in very good original condition. It comes from a facility where it was only occasionally used for training purposes. The control system is very user-friendly. A grinding travel of 600 mm on the longitudinal axis and a cross travel of 300 mm make this machine ideal for toolmaking, jig and fixture construction, and small batch production. This model series is characterized by extensive standard equipment and ease of use. The robust spindle head design and the double V guideways in both the longitudinal and cross axes guarantee long-term precision. The intuitive controls make operation easy and significantly increase productivity. The guideways are regularly lubricated via central lubrication. The Jung has been mechanically and electrically checked by us. Take advantage of the opportunity to view and test the Jung on site under power. Further surface grinders from well-known manufacturers can be found on our website.

Condition: refurbished (used), Year of construction: 2025, grinding length: 600 mm, grinding width: 250 mm, grinding wheel diameter: 250 mm, JUNG JF520 / JF525 SPM-X rebuilt mechanicaly, geometricaly und elektricaly rebuilt according JUNG acceptance protocoll for new machines - retrofit with new 12“-SIEMENS-Touch-OP control - new electrical cabinet with magnetic control for chuck - plain text error codes - electro mechanical vertikal feed - dresser compensation - automatic lubrication unit - all numeric values (verical feed) und on/off functions e.g. hydraulic and und coolant unit over touch panel - all analog functions e.g. rpm, magnetic force and feed of Z-axis fpr direct access of the worker over switches on the control panel Crodpfsbwl Uhsx Af Asd - 12 month warranty max. grinding range: 600 x 250 mm delivery time approx. 12 weeks

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 3806, grinding length: 600 mm, grinding width: 250 mm, grinding wheel diameter: 250 mm, grinding spindle speed: 3,000 rpm, power: 3.5 kW (4.76 HP), Equipment: rotational speed infinitely variable, JUNG JF520 SPM – workshop overhauled Mechanically / geometrically and electrically completely overhauled in 2007 Mechanically and geometrically partially overhauled in 2025 and fully functional Wear parts replaced Geometry overhauled according to JUNG new machine protocol - Grinding area: 600 x 250 mm - Stepper motor feed - 3-axis RSF digital readout - Dressing dimension compensation - Magnetic force control - Automatic central lubrication - Used magnetic chuck - Used paper band filter 6 weeks parts warranty Delivery time: short notice We are happy to take your used JUNG grinding machine in part exchange. Csdpfx Ajwz Hf Nof Aord

Condition: good (used), Year of construction: 1980, operating hours: 15,393 h, functionality: fully functional, grinding length: 600 mm, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Csdpjxru H Tofx Af Ajrd Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Year of construction: 1995, condition: ready for operation (used), A CNC surface grinding machine Jung, overhauled in 2003, is available. Grinding length: 500mm, grinding width: 200mm, max. workpiece height: 250mm, table dimensions X/Y: 600mm/200mm, grinding wheel dimensions X/Y/Z: 225mm/25mm/51mm, speed: 4200rpm, weight: approx. 2500kg, operating hours: approx. 16602h. Documentation available. An on-site inspection is possible. Crsdpfx Afow H Atts Asd