Used Kaltenbach Kks 350 for sale (111)

Condition: used, Year of construction: 1975, saw blade diameter 400 mm cutting diameter 130 mm stroke 135 mm saw blade diameter 370/400 mm feed speeds 0-500 mm/min cutting speed 1400/2800 U/min range of angles 0-180 ° capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 280 x 70 mm capacity 45 degrees: square 105 mm Wheel width 185 mm Fodpovp Sdzofx Aabopn Required air-pressure 8 bar total power requirement 3,7/4,5 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1,3 x 1,1 x 1,7 m Robust semi-automatic light metal profile sawing machine with cut from below and pneum. workpiece clamping from above, saw bridge adjustable from front to back. The year of construction is estimated! Any additional required safety shielding must be installed by the purchaser. Machine dealer with own stock of 1600 m².

Year of construction: 2009, condition: used, machine/vehicle number: 0301-230036, Kaltenbach drill saw system as a combination for use in light to heavy steel construction. With this Kaltenbach system, steel profiles can be drilled, center-punched and sawn to length in a single operation. Rolled profiles such as double T-steel, T-steel, U-steel, angle steel, hollow profiles and flat steel are processed here. The Kaltenbach drilling unit has an automatic tool changing device on three drilling spindles for five tool sizes each. The tools are positioned with high precision using ball screws and servomotors. The entire system is equipped with a length measuring device. Technical information KDXS 1215 drilling machine: - Working area min. 80 x 65 x 10 mm - Working area max. 1200 x 450 mm Fsdpfxerr Sq No Aabepn - 3 drilling units (vertical Y-axis, horizontal Z- and W-axis) each 11.0 kW frequency-controlled: 33.0 kW - Automatic tool changer (3x5) - Frequency-controlled drive power 78 kW - Working height 640 mm - Machine dimensions 6100 x 1300 x 3730 mm (LxWxH) - CNC control with Profiline 3 software Kaltenbach HDM 1432 High-performance circular saw as vertical saw with swivel bearing for high sawing performance of medium and heavy steel profiles, working area at 90° saw cut: 1200 x 450 mm, mitre adjustment for mitre cuts of -45°/90°/+35°, this circular saw system is equipped with a segment saw blade diameter 1430 mm. High cutting performance thanks to powerful drive NC-controlled cutting angle adjustment Feed via ball screw for ideal cutting results and short idle times

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 300242, cutting range round steel at 90°: 460 mm, total length: 2,320 mm, total height: 2,570 mm, total width: 3,660 mm, overall weight: 7,500 kg, cutting range square steel at 90°: 6,00,460 mm, cutting diameter: 460 mm, space requirement height: 2,570 mm, space requirement length: 2,320 mm, space requirement width: 3,660 mm, cutting length (max.): 9,999 mm, working height: 720 mm, section length (max.): 9,999 mm, section length (min.): 8 mm, coolant pump power: 180 W, saw drive: 9,200 W, opening width: 600 mm, saw band width: 54 mm, saw band length: 7,470 mm, Equipment: rotational speed infinitely variable, BAND SAW KBR 460 NA A metal cutting band saw that combines high precision, power and automation. The KBR 460 NA from KALTENBACH is a solution designed for demanding production and industrial plants • High efficiency - a powerful main engine (7.5 or 9.2 kW) guarantees efficient and fast cutting. • Precision - infinitely variable cutting speed ensures perfect adjustment to any material. • Wide cutting range - supports round materials up to Ø 460 mm and square materials up to 600 x 460 mm! • Automation - possibility of setting sections up to 9999.9 mm long, which eliminates the need for manual operation. • Minimum waste - the automatic system allows you to leave a residual element only 30 mm long! • Stable and durable construction - weight 7500 kg guarantees reliability and long service life. TECHNICAL DATA Weight: approx. 7500 kg Dimensions (L/W/H): 2320 x 3660 x 2570 mm Width with chip feeder (optional): 4650 mm Cutting band Dimensions: 7470 x 54 x 1.3 mm Cutting speed: infinitely variable (approx. 1-7) Working range Material dimensions • Round material: max. Ø 460 mm • Square material (W x H): max. 600 x 460 mm Cutting lengths • With single stroke: min. 8 - 760 mm • With multiple stroke: max. 9999.9 mm Min. residual length in automatic mode: 30 mm Working height: 720 mm Fjdsv Irtgspfx Aabjpn Electrical data • Main motor: 7.5 or 9.2 kW • Hydraulic motor: 2.2 kW • Coolant pump: 0.18 kW • Chip feeder (option): 0.18 kW • Roller conveyor drive (option): 0.18 kW • NC positioning unit (option): 0.37 kW

Condition: used, saw blade diameter 370 mm cutting range round 115 mm cutting range square 105 mm cutting range flat 70 x 240 mm cutting length min. 730 mm cutting lenght max. 4000 mm saw blade turning speeds 1250 / 2500 U/min table rotating 180 ° stroke 120 mm feed stepless 0 - 500 mm/min coolant capacity 45 degrees: square 95 mm Fedpfjd Il A Ijx Aabjpn capacity 45 degrees: flat 50 x 200 mm cutting speed 1250 / 2500 m/min weight of the machine ca. 1,1 t dimensions of the machine ca. 5,00 x 1,30 x 2,00 m Double Mitre Saw for aluminium consits of two SKL 370 Circular Saws on common rails, one saw fixed one saw movable. - Serial No.: 28232 / 28233 - pneunatic clamping of workpiece - coolant equipment

Condition: good (used), Year of construction: 1976, Semi-automatic cold circular sawing machine KALTENBACH Type : MSK 400 Year 1976 with roller table. Cutting range Round mat. max: 135 mm Flat mat. max : 200 X 80 mm Machine in good condition, operating instructions available. Fjdpfx Aoqxamgeabspn

Condition: good (used), saw blade diameter: 400 mm, – Double miter Fedpfjim Ezgex Aabspn – Mist lubrication system – Protective cap – 400V

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Fpedpfx Ashzbipjabon Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, drill diameter: 32 mm, product height (max.): 330 mm, product height (min.): 5 mm, product width (max.): 625 mm, product width (min.): 35 mm, rotational speed (max.): 1,600 rpm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Machine type: CNC drilling system for wide flange beams & welded double-T profiles Fjdpfevzp Uzjx Aabepn Working area: 35 x 5 - 625 x 330 mm Drilling data Drilling spindles vertical Y / horizontal Z+W: 1 / 2 pieces Drilling diameter (HSS): 6 - 31.75 mm Drilling length: 130 - 290 mm Drilling stroke: 120 mm Spindle speeds: 200 - 1,600 rpm Rapid forward/reverse: 10,000 mm/min Drilling feed: 20 - 160 mm/min Rapid positioning: 10,000 mm/min Tool change Tool change: manual Tool holders (3 x 1): 3 pieces Drive power 3 drilling drives: 5.5 kW (frequency controlled) Total power: 16.5 kW 6 positioning drives: 0.75 kW Total power: 4.5 kW Working environment Working height above floor: 640 mm Transport system Cross transport on the feed side: 6 liftable conveyor chains, depth: 3.6 m Feed roller conveyor: length 12.1 m for material Discharge roller conveyor: length 6.1 m for material Cross transport on the discharge side: 4 liftable conveyor chains, depth: 4.6 m Automation module: for feed and discharge side MACHINE DETAILS L x W x H (without accessories): 3,050 x 1,300 x 2,200 mm Operating voltage: 400 V / 50 Hz Connection: 3 phases + earth Supply line fuse: 35 A (slow) Power consumption (max.): 16 kVA Power consumption (nominal value): 13 kVA / 25 A Compressed air & air consumption Compressed air connection: 6 - 8 bar (customer-side for air cooling) Air consumption: 250 l/min at 6 bar EQUIPMENT - Profile beam drilling machine KDE 603 DSTV+ module for nested reading - Miter band saw machine KBS 620 DG - Cutting monitoring system - Length measuring device model: M 120 PP - Transport system T12 - Safety barrier

Year of construction: 2000, condition: excellent (used), Kaltenbach / APS CNC Flat Bar / Angle Punching / Shearing Line – Year 2000. 500mm Capacity Flat Bar. Fpjdpfoirakrox Aaben 60mm x 160mm Angle. 3 head Punch. Horizontal punch. 12 metres Gripper feed. Mitre Shearing.

Year of construction: 1996, condition: used, Used band saw Kaltenbach , model HMB 360 Technical data: Cutting diameter 90: 305 mm Cutting range at 90 degrees: square: 360x305 mm Cutting range at 45 degrees: round: 265 mm Cutting range at 45 degrees: flat: 265x305 mm Cutting range at 60 degrees: round: 175 mm Cutting range at 60 degrees: flat: 175x305 mm Table height: 700 mm Saw blade dimensions : 3830x27x0.9 mm Belt speed: 16-100 m / min Dimensions LxWxH: 2300 x 1450 x 1650 mm Total power requirement: 380 V , 1.1 kW Machine weight approx .: 780 kg Year of Build: 1996 Schnittbereich bei 90 rund: 305 mm Schnittbereich bei 90 flach: 360 x 305 mm Schnittbereich in Gehrung bei 45 rund: 265 mm Schnittbereich in Gehrung bei 45 flach: 265 x 305 mm Schnittbereich in Gehrung bei 60 rund: 175 mm Schnittbereich in Gehrung bei 60 flach: 175 x 305 mm Sgebandabmessungen: 3830 x 27 x 0,9 mm Sgebandgeschwindigkeit: 16 - 100 m/min Platzbedarf: 2300 x 1450 x 1650 mm Sgeantrieb: 380 V, 1,1 kW Weight : 780 kg Baujahr: 1996 Price of band saw machine Kaltenbach..... on request via e-mail Delivery conditionsDelivery time: from stock, t.v.v. Delivery: ex Baarle-Nassau Payment: for pick-up Prices: are net, excl. V.A.T. Technical details: changes under reserve Machinehandel De Leeuw BV can not be held responsible for differences in technical details in this offer and the actual machine Machinehandel De Leeuw BV is specialized in used machines and Fpodpjgbd Egsfx Aabon

Condition: good (used), Year of construction: 1999, CNC PUNCH / DRILL / SHEARING LINE for angle and plates. TECHNICAL DATA. PUNCH INSTALLATION. MATERIAL SPECIFICATION material sample steel 52 plate size (MM) X (MM) max 300 x 25 material sample steel 37 plate dimension (MM) X (MM) min 60 x 6 max 400 x 20 angle line dimension min 50 x 50 x 5 max 150 x 150 x 5 Punch information TYPE P2- XXX-XX number 2 TYPE P3-XXX-XX number 3 TYPE P5-XXX-XX number 5 punching capacity tonnage 110 punching diameter (mm) x thickness (mm) max 32 x 20 Shear UNIT Shear tonnage 180 Capacity max 400 x 20 Stamping UNIT Total number of characters number 40 Maximum number of characters per operation 12 CONNECTION VALUES Voltage 3 phase + Neutral + Earth V 3 X 400 Fuse A 63 slow Power KW 25 Frequency HZ 50 Permitted m-axis tolerance mains voltage % +/- 10 Field rotation Right Air pressure bar 6-8 Air capacity m2 / hour 250 Fsdpfx Aovkphgsabspn