Used Kasto Kastomaxcut Am 8 X 22 for sale (135)

Condition: ready for operation (used), total height: 1,915 mm, total length: 2,500 mm, total width: 1,290 mm, throat depth: 400 mm, empty load weight: 950 kg, nominal power: 6 kW (8.16 HP), Round material: Ø 400 mm Rectangular: 400 x400 mm Maximum material weight: 1000 kg/m Laedjxpymajpfx Af Sei Cutting speed: 20 to 110 m/min Saw blade dimensions: 5090 x 41 x 1.3 mm Max height of workpiece: 400 mm Sawspeed: 20-110 m/min Length of band saw: 5700 x 41 x 1.3 mm

Condition: used, Heavy Duty Powered Roller Conveyor KASTO with Steel Support Rollers Straight roller conveyor section with highly robust steel support rollers Roller conveyor length: 2000 mm Usable width (roller width): 500 mm Conveyor height: 880 - 930 mm Number of rollers: 7 pieces Ledpfx Aou Uwygjf Ssai Roller spacing: 4x 295 mm, 2x 390 mm (center-to-center) Roller diameter: Ø 100 mm Transport speed level 1: 3 meters/min Transport speed level 2: 13 meters/min Motor power: 0.17 / 0.7 kW Electrical connection: 400 Volt, 50 Hz - Reversible operation (right and left) - 2 transport speeds via drive motor with 2 speeds - All rollers driven, chain drive - Drive via FLENDER HIMMEL geared motor - Geared motor with brake - 1 adjustable-height support foot via slotted holes - Very robust and heavy design with ball-bearing steel rollers - Metal base frame, frame length 2230 mm Required space (L x W x H): 2650 x 870 x 900 mm Net weight: 580 kg Good condition

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A3 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 330 Sawing capacity flat 90° 330 x 330 mm Ljdpsu R R Acefx Af Ssai Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length 4600 mm width 2150 mm height 2310 mm weight 4300 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Year of construction: 2012, condition: good (used), functionality: fully functional, Technical specifications Cutting capacity: Panel: 660 x 2560 mm Lsdpfxjv Tzq Ee Af Ssai

Condition: used, Year of construction: 1978, cutting diameter 170 mm band length 350 mm capacity 90 degrees: square 160 mm capacity 90 degrees: flat 170 x 220 mm total power requirement 0,85 kW weight of the machine ca. 180 Kg dimensions 1,2 x 0,8 x 1,0 m Hydraulic hacksaw with: - Coolant device Ledpfx Aer H Nnvsf Sjai

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, feed length X-axis: 750 mm, KASTO SBA 220 AU Cutting range: 220 mm/square 220 mm, hydraulic clamping Cutting length: Min. 6 mm, max. 750 mm, automatic forwarding, feed length 750 mm Laedpfx Afjv Sqkls Ssi Cutting speed: continuously variable from 18 m/min to 110 m/min, strip width 1.3 mm Voltage: 50 Hz, 3 x 400 volts, power 4 kW, machine weight approx. 1750 kg Overall machine dimensions: Length 2050 mm, width 4050 mm, height 1300 mm Various accessories: Set of saw blades, feed roller conveyor, coolant system, material stops, workpiece counter

Condition: used, max. diameter: 400 Ljdpfxoih N Shs Af Seai

Condition: used, Year of construction: 2005, Cutting area round : 430 mm Cutting area square: 430 x 430 mm flat cutting area: 430 x 430 mm smallest dimension to be cut: 10 x 10 mm minimum length to be cut: 6 mm minimum remaining piece length, single cut: 10 mm minimum remaining piece length automatic operation: 35 mm automatic material feed: . roller conveyor: DoAll 2013-V2 max. unit weight: 2.275 kg tape speed: infinitely adjustable Cutting feed: infinitely adjustable Material feed: with ball screw Automatic feed: with horizontal clamping vise Material stress: hydraulically adjustable Tension: Machine chuck: 200 - 800 daN, chuck feed: 200 - 1500 daN Saw band tension: hydraulic Saw blade cleaning: Easily replaceable double brush, hydromotor driven Coolant system: five nozzles, tank approx. 150 l, pump output approx. 25 l/min Laedpfx Afexyq Dke Sji Machine dimensions: Length: 2140 mm, width: 4245 mm with chip conveyor, height: 2400 mm mass: approx. 4300 kg vinho: 430 x 430 mm

Condition: good (used), Year of construction: 2001, functionality: fully functional, Technical details cutting diameter 280 mm saw band length 4930 mm cutting width 280 mm total power requirement 7 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2280 x 2680 2050 mm Additional information Technical Data: Cutting Ranges Round 280 mm Ledpfx Afsxx Nrqe Sjai Square Width x Height 280 x 280 mm Smallest Diameter to Cut 10 mm Minimum Length to Cut 6 mm Shortest Remaining Piece Length in Single Cut 15 mm Shortest Remaining Piece Length in Automatic Operation 80 mm Feed Length 700 mm Multiple Feed Length 9999 mm Maximum Material Weight 400 kg/m² Cutting Speed ??Infinitely Variable 20-110 m/min Saw motor drive power: 2.2 kW Cutting feed: Infinitely variable Material clamping: Hydraulically infinitely variable, clamping pressure: 20-60 bar Saw blade dimensions: 4930 x 34 x 1.1 mm Total weight: 1800 kg Total drive power: 7 kW Dimensions (L x W x H): 2280 x 2680 x 2050 mm Equipment: CNC control Machine roller conveyor, dimensions: 2000 x 550 x 700 mm, weight: approx. 150 kg Machine documentation

Condition: good (used), Year of construction: 2012, functionality: fully functional, Kasto Functional U Metal Band Saw Manufacturer: Kasto Model: Functional U Year of Manufacture: 2012 Condition: Used, workshop-inspected Standard equipment: - Cutting speed: 20 – 110 m/min - Continuously adjustable mitre device (-45° to +60°) - Cutting capacities: - 90° round: 260 mm - 90° flat (W x H): 300 x 260 mm - 90° square: 260 x 260 mm - +45° round: 200 mm - +45° flat (W x H): 200 x 240 mm - +45° square: 200 x 200 mm - +60° round: 165 mm - +60° flat (W x H): 160 x 120 mm - +60° square: 150 x 150 mm - -45° round: 200 mm - -45° flat (W x H): 200 x 240 mm - -45° square: 200 x 200 mm - Weight: 510 kg - Saw blade dimensions: 2910 x 27 x 0.9 mm - Saw blade guides: Carbide, replaceable - Material clamping: Mechanical - Cutting feed: Hydraulic - Saw blade tension: Mechanical - Saw blade cleaning: By means of a driven, easily replaceable wire brush Scope of delivery: - Operating manual - Roller conveyor, 2 x 1 m - Coolant system - Chip brush Lodpfexxl Hksx Af Soai Machine is powered on. Video available.

Condition: excellent (used), KASTO HBA 420AU Bandsaw Gantry type Laedpfx Afoxxht Ho Soi Automatic Cutting diameter: 420 mm Single material feed: 600 mm Multiple feed: x9 Coolant pump Documentation Weight: 3,400 kg Net Transport possible to any location in the country Feed table Machine in perfect technical condition!

Condition: excellent (used), functionality: fully functional, Thank you for your inquiry regarding a KASTO bandsaw Type: SSB 260 VA Heavy-duty, fully hydraulic high-performance bandsaw, solidly constructed, with a horizontally and parallel traveling saw band, designed for cutting profiles, tubes, and solid materials of all grades, including extremely difficult-to-machine materials (e.g., titanium, Inconel, Hastelloy). Laedpexwzr Hsfx Af Sei Suitable for use with bi-metal and carbide-tipped saw bands. The saw unit is manufactured as a solid construction from polymer concrete, ensuring maximum smooth operation and extended blade life. Guidance of the saw unit is via a vertical and a round column guide (double column guide) with hardened and ground guide rails. Hydraulic blade tensioning and hydraulically preloaded carbide blade guides. Material clamping is achieved via two hydraulic vises. Machine operation is straightforward and user-friendly. The cutting length can be set via a handwheel with 0.1 mm resolution. The quantity setting is handled via a piece counter; when the set quantity is reached, the machine switches off automatically. Material feed is provided by a feed cylinder, ensuring top cutting accuracy. The machines are easy to operate and work fully automatically. SSB 260 VA Cutting capacity: 260 mm x 260 mm (Ø 260 mm) Technical Data – Bandsaws KASTO Bandsaw Automat Machine type SSB 260 VA Technical specifications 2-column guided Year of construction 2000 Cutting range 260 x 260 mm Drive motor (saw gearbox) 4 kW Drive motor (auxiliary) 6.5 kW Cutting speed 15–125 m/min Hydraulic feed rate Infinitely adjustable Saw band dimensions 4115 x 41 x 1.1 mm Feed length 600 mm Max. with multi-feed 5400 mm Material support height 850 mm Machine dimensions: Length/Width: 1690 x 1900 mm Height: 2030 mm Machine weight 2100 kg Equipment / Accessories: • Swarf conveyor • Coolant system • Multiple feed • Side guide rollers • Machine roller conveyor • Adjustable side guide rollers • Prepared for bundle clamping device • Multiple feed counter • Clamping force reduction

Condition: used, Year of construction: 1994, cutting diameter 260 mm saw band length 4310 x 27 x 0,9 mm table height 810 mm Lajdpfxorl U Nmo Af Soi cutting speed 17 m/min total power requirement 3,2 kW weight of the machine ca. 920 kg dimensions of the machine ca. 2,5 x 1,7 x 1,5 mm

Condition: good (used), Year of construction: 2005, Round cutting area: 260 mm Square cutting area: 260 x 260 mm Smallest diameter to be sawn: Ø 10 mm Smallest cutting length: 5 mm Minimum remaining piece length, single cut: 10 mm Minimum remaining piece length, automatic operation: 110 mm Single automatic material feed max.: 680 mm Multiple material feed: 9,999.9 mm Belt speed: continuously adjustable 15 -125 m/min Cutting feed: continuously adjustable Material feed: ball screw Automatic feed: with feed vice (Sp II) Material clamping: hydraulic, continuously adjustable. Clamping force: Machine vice (Sp 1) approx. 150 - 800 daN Feed vice (Sp II) approx. 150 - 800 daN Saw blade dimensions Standard: 4115x41x1.3mm Saw blade guide: hard metal, replaceable Laodpfx Asu R I A Hsf Sji Saw blade tension: hydraulic Saw blade cleaning: using easily replaceable wire brush. Driven by flex shaft in proportion to the main drive. Coolant: supply via coolant nozzle Volume of coolant tank approx. 110 l Pump output approx. 50 l/min including roller conveyor

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details cutting diameter 730 mm saw band length 9195 x 67 x 1,6 mm cutting width 830 mm Control Kasto EasyControl saw band speed 12 - 120 m/min Ledpoxwugkofx Af Seai total power requirement 30 kW weight of the machine ca. 11,6 t dimensions of the machine ca. 4800 x 2600 x 2870 mm Additional information Machine is in good condition. On 7th. October 2025 the bearings of the roller wheel (belt tensioning side) have been replaced by KASTO and the switch for the belt tension was replaced. The machine can be demonstrated under power in our warehouse. Heavy-duty, high-performance band saws with a horizontally and parallel-traversing saw blade for cutting solid material, profiles, and pipes of all qualities, including difficult-to-cut materials such as titanium, Hastelloy, Inconel, etc. The optimal use of carbide or bi-metal saw blades was consistently considered during the development of these machines. Cutting range Cutting diameter: 730 mm Cutting width: 830 mm Saw blade size: 9195 x 67 x 1.6 mm Total power requirement: 30 kW Machine weight: 11600 kg Machine dimensions (L x W x H): 4800 x 2600 x 2870 mm Equipment: Carbide package With driven heavy-duty roller conveyors for the infeed and outfeed sides. Roller conveyor on the inlet side, dimensions (LxWxH) 4000x1000x500 mm Roller conveyor on the outlet side, dimensions (LxWxH) 3000x1000x500 mm Weight 2000 kg Chip conveyor

Condition: used, Year of construction: 1998, cutting diameter 1360 mm saw band length 8738x80x1,6 mm cutting width 1060 mm KASTO BBS 1360/1060 block band sawing machine Hydraulic saw blade tensioning, factory-set. Mobile sawing machine for heavy sawing work on large blocks/slabs. Technical data Total drive power approx.: 13kW Saw motor approx.: 7.5kW Max. cutting height with cut monitoring: 1360 mm Max. cutting height without cut monitoring: 1420 mm Cutting height with pressure roller: 1280 mm Min. cutting width: 10 mm Max. cutting width with electromechanical measuring stop approx.: 1000 mm Cutting width without measuring stop: 1060 mm Cutting speed: 14-75 m/min Cutting feed: 0.7-270 mm/min Saw blade dimensions: 8738 x 80 x 1.6 mm or 8738 x 67 x 1.6 mm Rake width: 2.4 mm Saw blade guide: carbide, replaceable and adjustable Saw blade back guide: roller, replaceable Saw blade cleaning: by easily replaceable plastic brushes, motorised Lsdpfx Aoxt Uvkjf Ssai Coolant: supplied via two coolant nozzles Pump capacity approx.: 100 litres/min On request, we can also offer you the 7 immediately available saw blades at an additional cost.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, overall weight: 2,200 kg, cutting range square steel at 90°: 260 mm, saw blade length: 4,115 mm, Automatic Bandsaw Kasto Ssb 260 Va Model: Ssb 260 Va Year: 1998 Lodexf Hr Ijpfx Af Sjai Cutting capacity Ø 260 mm Main motor power: 4 kW Automatic feed stroke: 600 mm Cutting capacity (square): 260 x 260 mm Blade dimensions: 4,115 x 41 x 1.3 mm Total weight: 2,200 kg Complete with: New saw bands Internal code: svr 323

Condition: reconditioned (used), functionality: fully functional, saw blade length: 300 mm, cutting range round steel at 45°: 150 mm, cutting height (max.): 150 mm, The fully hydraulic high-speed production hacksaw has universal hydraulics for the exclusive or alternating cutting of thin and thick-walled profiles as well as solid material without changing the saw blade with the uniform tooth pitch of 3 or 4 teeth per inch. Pre-tensioned bow guide, closed oil hydraulics, triple swivel bearing, separate coolant system, infinitely variable hydraulic cutting pressure, lift-off movement and accelerated return stroke, equipped with infinitely variable mitre device as standard. mitre device as standard. Lifting of the saw arm in rapid traverse. Pendulum vice for perfect utilization of the saw blade. Longitudinal guide with ground and and hardened guide rails to transfer the cutting pressure forces to the saw frame. Ledorrvgxjpfx Af Seai Automatic limit stop. Push-button operation for on, off and up functions of the saw arm Manufacturer KASTO Metal hacksaw Machine type WBS 150/170 U Drive power: 0,75 KW Stroke rates: 85/170 min Cutting speed: 16/32 m/min Universal hydraulics: standard Saw feed hydraulics Cutting range round: 150 mm Cutting range flat: 150/170 mm Mitre 0-45 ° Material support height: 700 mm Weight: 170 kg. Length/width: 770x700 mm Height: 1370 mm Saw blade dimensions: 300x30x1.5 mm Machine for notching Accessories. coolant device

Condition: used, Year of construction: 1990, cutting diameter 280 mm Lodsxab Hcopfx Af Soai band length 450 mm capacity 90 degrees: square 240 x 240 mm capacity 90 degrees: flat 280 x 160 mm capacity 45 degrees: round 180 mm dimensions of saw-blade 450 x 40 x 2.0 mm engine output 2.6 kW height of material-table 500 mm weight of the machine ca. 495 kg range L-W-H 1500 x 600 x 1340 mm Furnishing: - stepless hydraulic lowering - manual vice - Miter adjustment ü. vice - coolant device

Condition: ready for operation (used), Year of construction: 1986, saw band length: 450 mm, cutting height (max.): 280 mm, cutting capacity 280 mm band length 450 mm double hydraulic vise Ledpfexbhm Sox Af Seai

Condition: good (used), Year of construction: 2004, functionality: fully functional, saw band length: 5,700 mm, cutting height (max.): 400 mm, stepless cutting speed hydraulic material clamping infeed automat chip conveyor coolant device roll conveyor Technische Daten: Schnittbereich rund / cutting range round 400 mm Schnittbereich vierkant /cutting range square 400x400 mm Mehrfachvorschub / multiple infeed 20000 mm Schnittgeschwindigkeit / cutting speed 20-110 m/min. Sägebandlänge / dimensions of the saw band 5700x41x1,3 mm Antriebsleistung / drive capacity 8 kW Lsdpfotzkdgjx Af Sjai Gewicht der Maschine ca. / weight 2700 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 1997, cutting diameter / mm saw band length / mm cutting width / mm Control / KASTO HBA 1060/1260AU band saw Cutting range: 1060x1260mm Cutting speed: 16-80m/min Lajdexrvmzspfx Af Ssi Workpiece weight: Max. 20 tonnes Saw blade: 11400x80x1.6mm Includes remote control Machine weight: 19 tonnes On request, we can offer you the 5 immediately available saw blades at an additional cost.

Condition: ready for operation (used), Year of construction: 2018, The UniTower is suitable to store bars or extrusions as well as sheet metal, plates, Euro pallets or boxes. Pallets: Dimensions X/Y/Z: 3000mm/1500mm/90mm, payload per pallet: 1500kg, number of storage spaces: 86 pieces. Payload: 15kN, occupancy rate: 90%. Total dimensions without stations X/Y/Z: approx. 9000mm/6000mm/5800mm. On-site inspection is possible. Lajdpfxsxv Au To Af Sji

Condition: used, Year of construction: 1980, length 380 mm max. band length 430 mm weight of the machine ca. 0,5 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Ledpsup H Nnjfx Af Sjai

Condition: used, Year of construction: 2002, cutting diameter / mm saw band length / mm cutting width / mm KASTO tec AC5 automatic band saw Sawing capacity: 23kW Machine weight: 5.9t Year of manufacture: 2002 Cutting ranges in mm approx.: Round: 530mm Square: 530x530mm Flat: 530x630mm Smallest dimension to be sawn: 10x10 mm Minimum length to be sawn: 6 mm Minimum residual length, single cut: 10 mm Minimum residual length, automatic mode: 35 mm Automatic material feed, single, max. (standard): 600 mm Automatic material feed single max. (optional): 1500/3000 mm Multiple material feed: 9999 mm Machine roller conveyor length: 1568 mm Max. piece weight: 2275 kg Ledpfx Afexrg E Io Sjai Cutting speed: 12-120 m/min (infinitely variable) Cutting feed: continuously adjustable Material feed: with ball screw Automatic feed: with horizontal clamping device Material clamping: hydraulic, continuously adjustable Clamping force Machine clamping device: 200-1000 daN Feed clamping device: 200-2000 daN Saw blade clamping: hydraulic, factory-set Saw blade cleaning: by easily replaceable double brush, driven by a hydraulic motor. Coolant tank volume: approx. 185 l Pump capacity: approx. 25 litres/min On request, we can offer you the 4 immediately available saw blades at an additional cost.