Used Kasto Kastossb A 2 for sale (117)

Year of construction: 2007, condition: ready for operation (used), Cutting range round: 560mm, cutting range flat (W x H): 620/560mm, material feed length, single: 900mm, multiple feed: 9999mm, shortest cut length: 6mm, minimum diameter to be cut: 15mm, minimum remnant in single cut: 15mm, shortest remnant length in automatic mode: 80mm, saw motor power, frequency-controlled: 5.5kW, cutting speed, stepless: 13-127m/min, saw blade dimensions: 7400/54/1.6mm, material support height: 700mm, total drive capacity in basic configuration: 12kW, length: 2370mm, width: 3610mm, overall dimensions with chip conveyor (L/W): 2370/3610mm, machine table height lowered: 2230mm, weight: approx. 5.2t with chip conveyor. An inspection on site is possible. Djdpexg Rhvefx Agfour

Condition: used, Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Castors height: 475 mm adjustable -Roll width: 280 mm Djdpob Hd Uuefx Agfjur -Dimensions: 380/380/H480 mm -Weight: 64 kg

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A4 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 430 Sawing capacity flat 90 430 x 430 mm Feed range 0 - 600 mm Multi-feed range 0 - 9999 mm Min, saw length 35 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length 4800 mm Dujdpfju R R Avsx Agfsr width 2200 mm Height 2200 mm weight 5200 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Year of construction: 1990, cutting diameter 280 mm band length 450 mm Dusdpfx Aexab Hcogfer capacity 90 degrees: square 240 x 240 mm capacity 90 degrees: flat 280 x 160 mm capacity 45 degrees: round 180 mm dimensions of saw-blade 450 x 40 x 2.0 mm engine output 2.6 kW height of material-table 500 mm weight of the machine ca. 495 kg range L-W-H 1500 x 600 x 1340 mm Furnishing: - stepless hydraulic lowering - manual vice - Miter adjustment ü. vice - coolant device

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3515 104 114, saw blade diameter: 350 mm, cutting range round steel at 45°: 100 mm, cutting range round steel at 90°: 100 mm, total length: 800 mm, total width: 1,250 mm, overall weight: 350 kg, cutting range square steel at 90°: 90 mm, The KASTOdisc U 10 is a robust semi-automatic vertical cold circular saw, suitable for precise metal cutting in workshops and medium series. Featuring two speeds and an adjustable feeder, it offers flexibility and high-quality cuts, while the pneumatic clamp stabilizes the material. Dujdpjwxcuzefx Agfor

Condition: ready for operation (used), functionality: fully functional, KASTO SSB 260 – Precise and Durable Metal Saw For sale is a KASTO SSB 260, a reliable and proven band saw for precise cutting operations. This machine impresses with its robust construction, high accuracy, and long service life, making it ideal for professional use. Dsdpfx Aeyba Ucegfour Technical Data: Overall system dimensions: Length: 2,160 mm Width: 2,080 mm Height: 2,030 mm Total weight: approx. 2,200 kg Total drive power: approx. 6.5 kW Saw motor: approx. 4.0 kW Cutting range round: approx. 260 mm Cutting area square: 260 × 260 mm Smallest diameter to be cut: 10 mm Smallest cut length: 5 mm Special feature: In addition to the fully functional machine, a second KASTO SSB 260 is included as a spare parts donor. For this reason, two different machines are shown in the images. Note: All information has been provided to the best of our knowledge, but without guarantee. If you are interested or have further questions, feel free to contact me.

Condition: used, Year of construction: 1987, Hydr. hacksaw, metal saw, lifting saw KASTO Unfortunately there is no type plate available, the data is from a comparable saw Type PSB WBS 210 / 230 Year of manufacture in the 80s Sawing area - round Ø 250 mm Sawing area - square 225 x 225 mm Sawing area - rectangle 260 x 100 mm Cutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Saw blade length 400 mm Motor power 1.4 and 1.8 kW pole-changing Mains connection 380 Volt, 50 Hz - only for 90° cuts, no mitre adjustment - Saw motor with 2 speeds and 3 V-belt speeds - Hydraulic saw arm feed - Hydraulic cutting pressure adjustment via throttle valve - Rapid traverse for lowering saw bow - manually height-adjustable material support table with mm scale via handwheel - Manual material clamping - Coolant device in the machine base Dujdpeq R Riiefx Agfer Space requirement L x W x H 1500 x 700 x 1550 mm Weight approx. 590 kg

Condition: used, Hydr. hacksaw KASTO HBS 210 / 240 Machine no. No. 1116 145 220 Year of construction 1994 Sawing range at 90° round 210 mm flat 240 x 190 mm square 210 x 210 mm at 45° round 150 mm Saw blade length 400 mm Number of strokes 62 / 125 strokes per min. Material support height 500 mm Motor power 0.5 / 0.75 kW Mains connection 400 Volt, 50 Hz Dsdpfxsuqgbtj Agfeur - Drive motor with 2 speeds - Coolant pump in the machine base frame Space requirement L x W x H 1200 x 500 x 1200 mm Weight 170 kg Good condition

Year of construction: 2024, condition: new, We sell chip brushes for the common machine types for Behringer and Kasto sawing machines. Djdoww Dgiepfx Agfjur Minimum order quantity 20 pieces. We are happy to answer your inquiries.

Year of construction: 2024, condition: new, We sell chip brushes for the common machine types for Behringer and Kasto sawing machines. Minimum order quantity 20 pieces. We are happy to answer your inquiries. Djdpstp T N Uefx Agfeur

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: 3092102159, functionality: fully functional, cutting height (max.): 70 mm, cutting width (max.): 60 mm, saw blade diameter: 285 mm, cutting speed: 1,60,000 mm/min, saw drive: 6 W, TECHNICAL DETAILS Material type: Construction steels, stainless steels, tool steels Saw blade type: Carbide tipped Cutting diameter: 50 – 70 mm Material width: 60 mm Material height: 70 mm Cutting area Round cutting area: 15 – 70 mm Square cutting area: 15 – 60 mm Flat cutting area: 15 x 15 – 70 x 60 mm Min. remnant length: 65 mm Saw blade and fixture Saw blade sizes: 250x80 T / 250x60 T / 285x60 T mm Saw blade holder: 32/4x9/50 mm Saw blade clamping flange: 110 mm Performance Cutting speed: 40 – 160 m/min Saw blade drive: 5.5 kW Saw feed Feed speed (infinitely variable): approx. 25 – 1,000 mm/min Rapid movement: approx. 8,000 mm/min Material feed Trolley feed speed: 15 – 40 m/min Rapid movement approx.: 95 m/min Dodpfx Agjwm Hr Hsfsur Loading table Bar lengths: 1,600 – 6,000 mm Support depth: 750 mm Max. single bar weight: 200 kg Max. total load: 2,000 kg Working height: 1,000 mm MACHINE DETAILS Machine weight: 1 t Cutting direction: Straight cut Automation: automatic Weight: 980 kg

Condition: used, capacity 90 degrees: round 110 mm capacity 90 degrees: flat 255x160 mm capacity 90 degrees: square 210x210 mm capacity 45 degrees: round 160 mm capacity 45 degrees: flat 165x110 mm cutting range 45 degree right side: square 150x150 mm cutting speed 11/13/17/22/26/34 m/min stroke speeds 50/64/82/100/128/164 Hübe/min dimensions of saw-blade 400x36x2 mm power requirement 1,8 kW Dedpfxowf Dy So Agfsur

Condition: used, Year of construction: 1986, cutting diameter 460 mm saw band length 5334 mm cutting width 1,3 mm cutting range - square - 320 x 320 mm cutting range - flat - 500 x 320 mm control minipos 807 cutting speed 16 - 80 m/min dimensions of saw-band 5334 x 41 x 1,3 mm feed length 580 mm feed length: multiple 5800 mm total power requirement 8 kW weight of the machine ca. 3,5 t Dsdpfxjtqqrfj Agfeur dimensions of machine L x W x H 2,7 x 2,95 x 2,15 m Accessories: roller track 4150 mm length, roller track 2150 mm length, bundle clamping device, chip conveyor, coolant

Condition: used, cutting diameter 320 mm capacity 45 degrees: round 180 mm capacity 90 degrees: square 320 x 320 mm Dsdpjvh Ncfjfx Agfour capacity 45 degrees: square 180 x 180 mm strokes per minute 40 - 57 - 80 - 115 1/min cutting speed 16 - 22 - 31 - 45 m/min dimensions of saw-blade 575 x 55 x 2,5 mm total power requirement 3 kW weight of the machine ca. 700 kg dimensions of machine L x W x H 1,55 x 0,70 x 0,98 m - with mitre cutting Accessories: coolant

Condition: ready for operation (used), Fully hydraulic automatic circular saw for workshop and production. The material is clamped by a Dusdeiuz Smopfx Agfer hydraulic vices. The control offers simple machine operation. The length can be adjusted via a vernier with 0.1 mm resolution. The piece count adjustment The piece count is set by a piece count counter which switches off the machine when the piece count is reached. The material feed is carried out via a hydraulic cylinder and ensures the highest cutting accuracy. If you have any questions or need a different cutting range, just give us a call. We would be pleased to show and demonstrate the machines to you. Technical data: Bandsaws KASTO Machine type GKS AU Technical data: Drive power Drive power saw gear. 1,6/2,5 KW Cutting speed 14/28 m/min Cutting range round: 140 mm Cutting range flat: 160x90 mm Saw feed hydraulics Hydraulic Saw blade dimension 425 mm Hydraulic material feed 600 mm Material support. 1050 mm Machine dimensions Length/width 2575x2700 mm Height 1900 mm Weight of the machine 1350 kg Year of manufacture 1987

Condition: good (used), Fully automatic with miter cut, Max. Diameter or cutting width 180 mm, Djdpfjtqdvgex Agfsur smallest dimension to be sawn D 10 mm, Automatic feed single 600 mm, max. feed length multiple 1800 mm, Minimum offcut length for single cut 20 mm, minimum offcut length for automatic operation 110 mm, Table rotation range for mitre cut 135 degrees, Total drive power 3.2 kW, Weight without roller conveyors 1100 kg, coolant system, the saw is still under power, Functional video available, Operating instructions with circuit diagrams and spare parts lists.

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Saw band 250-285 mm Motor power 5.5 KW Cutting speed 35-160 m/min Working range square max.: 15 - 60 mm Working range round max.: 15 - 70 mm Saw feed 2 - 100 mm/s infinitely adjustable Cutting length 5-250 mm Feed speed max. 1000 mm/s Weight (saw)approx.: 1500 kg (magazine)approx.: 800 kg Dimensions LxWxH (saw)approx.: 1100mm x 1600mm x 2300mm (magazine)approx.: 7500mm x 1400mm x 1600mm The machine is suitable for mass cutting of steel due to its equipment and construction and is the predecessor of the KASTOwa C7 and KASTOspeed C9. The machine will be in mint condition after a general overhaul (retrofit), which is guaranteed by our company. The machine will be generally overhauled in our company at the customer's request. Among other things, the following points will be renewed: - New PLC control Siemens S7 - Conversion to Siemens HMI - Conversion to fully electronic section length selection (optional) - New electrical components - New pneumatic lines - Overhaul or replacement of all pneumatic components - New hydraulic lines - Overhaul or replacement of all hydraulic components - Overhaul of Menzel minimum lubrication system - Replacement of general wear parts - Overhaul of the loading magazine - Extension of the safety concept The machine also has: - a slide-off magazine for 6m bars - Hydraulic material feed unit Warranty: Dusdpfx Agjuizlcsfor Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Conversion to spindle extraction - Conversion to trapezoidal spindle stop manual 0-800mm - Conversion to fully electronic ball screw stop 0-800mm - Conversion of main saw drive to 18 KW - Delivery and installation on your premises - Training of your employees

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A3 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 330 Sawing capacity flat 90° 330 x 330 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Duedsu R R Acopfx Agfjr Dimensions (estimate) length 4600 mm width 2150 mm height 2310 mm weight 4300 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Year of construction: 2004, saw blade diameter 360 / 425 / 460 mm cutting diameter 10 - 140 mm cutting speed 25 - 160 m/min Dujdpfx Agov Nq Rtofer total power requirement 35 kW weight of the machine ca. 4,2 t dimensions of the machine ca. 2,8 x 1,8 x 2,2 m

Year of construction: 2004, condition: good (used), A used good condition double miter cold circular saw machine from KASTO Model: "KASTOdisc A10". - Fully automatic operation - Single cut - Hydrasulic saw bars - Central lubrication for saw guides - Coolant device - documentation Saw blade diameter 350mm Cutting range round 90°/ 45° 100/ 100mm square 90/ 45° 100x100/ 100x100mm Rectangle 90°/ 45° 170x100/ 130x100 Shortest remaining piece length with single cut at 90° 30mm Shortest remaining piece length in automatic mode at 90° 260mm Working height 950mm Dimensions WxDxH 1530x1348x1890 mm Dsdpfx Ajkfvhkjgfsur Weight 980kg Further tech. Data see pdf. document Tech. Data and dimensions: Errors excepted

Condition: good (used), Year of construction: 2008, machine/vehicle number: 6424102096, Offer No. 25101 Technical Data: - Cutting range at 90° round 400 mm - flat W 400 x H 400 mm - Cutting range at 45° flat W 320 x H 320 mm - Cutting range at 60° flat W 210 x H 320 mm - Material support height approx. 700 mm - Saw band dimensions 5090 x 34 x 1.1 mm - Cutting speed steplessly adjustable 17 - 90 m/min Djdpfx Agowpincsfsur - Hydraulic lifting – lowering of the saw frame - Cutting pressure steplessly adjustable 0 - 10 m/min - Total drive power 400 V / 3.5 kW - Coolant system - Infeed – roller conveyor 7000 mm - Outfeed – roller conveyor with stop + digital display 4000 mm - Space requirement approx. W 2000 x H 1400 x D 2800 mm - Weight approx. 1200 kg

Condition: used, Year of construction: 1980, machine/vehicle number: 258695, Lg.no. 24444 Technical data: - E.- Hydr. raising/lowering of the saw bow - Saw blade dimensions 400 x 30 x 1.5 mm Dedpfxou H Acye Agfsur - Cutting range at 90° - round approx. 210 mm - flat approx. 240 x 190 mm - square approx. 210 x 210 mm - Cutting range at 45° - round approx. 150 mm - flat approx. 150 x 100 mm - approx. 130 x 210 mm - square approx. 145 x 145 mm - Adjustable stroke speeds + cutting speeds - Stroke speeds 62 / 125 m/min - Average cutting speed 16 / 32 m/min - Mitre-adjustable vice with opening width up to 260 mm - E.-Mot. coolant device - Drive 400 V / 1.1 kW - Space requirement approx. W 600 x H 1250 x D 1300 mm - Weight approx. 250 kg

Condition: good (used), Year of construction: 1988, machine/vehicle number: 77796, Offer 25071 Duodpfewzu A Aex Agfor Technical data: - Electro-hydraulic raising and lowering of the saw bow - Saw blade dimensions: 400 x 45 x 2.0 mm - Cutting range - 90° round: approx. 250 mm - flat: approx. 250 x 130 mm - square: approx. 220 x 220 mm - Max. vice opening width: 405 mm - Stroke and cutting speeds adjustable - Mitre-adjustable vice - Electric motor with coolant unit - Drive: 380 V / 2.0 kW - Required space: approx. W 550 x H 1270 x D 1700 mm - Weight: approx. 380 kg

Condition: excellent (used), Frietsch SAW MACHINES Dusdpjfh Hukefx Agfor Purchase and sale of KASTO sawing machines Dear ladies and gentlemen, we buy and sell, recondition, overhaul and paint KASTO - sawing machines. For more than 40 years we have experience with KASTO - sawing machines and we are specialized in overhauling the machines. The machines are overhauled by skilled personnel according to KASTO factory standards. We are also looking for KASTO sawing machines according to your wishes. for machine overhaul. Good price - performance ratio through professional machine overhaul.

Condition: used, Year of construction: 1988, cutting diameter 210 mm band length 400 mm capacity 90 degrees: square 190 mm capacity 90 degrees: flat 240 x 190 mm cutting speed 16/32 m/min total power requirement 1,1 kW weight of the machine ca. 180 Kg dimensions 1,2 x 0,8 x 80,8 m Hydraulic hacksaw with: - Coolant device Djdpfx Asxz Hhhogfjur - good condition