Used Kern 3500 for sale (32)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, TECHNICAL DETAILS Inserting speed: 22,000 mail pieces/h Envelope stacking capacity: 3,000 pieces (24#) Insert stacking capacity: 2,000 pieces (single, folded 20#) Feeder capacity: approx. 45.56 cm Tolerance: ± 0.08 cm Format range: 9.84 × 16.19 cm to 17.62 × 25.08 cm MACHINE DETAILS Nlodpfeyzpgijx Ap Dsh Electrical data Power supply: 3 × 400 V, 3PN+E, 50–60 Hz Protection: 16 A Dimensions: approx. 11.89 x 0.92 m Counter reading: 145,000,000 The indicated dimensions and format sizes were taken from the data sheet and converted from US measurements (in./ft.) to cm. Note: The machine is currently under a full maintenance contract.

Condition: used, Year of construction: 2009, functionality: fully functional, The machine is disassembled and stored in a warehouse. Photos of the modules are available upon request. Please submit reasonable offers. We have a Kern 2600 machine for sale; below is information about the envelope machine offered for sale: Equipped with Mail Factory KVS Inserting and Sealing Module K990 Cutter – NOT INCLUDED DE Direct Entry Module x 1 unit LM Spacer Module x 1 unit FSH Folding Module x 1 unit BFGD Module x 2 units Transport Module x 1 unit Nlsdpfxjy Eym Us Ap Deh Output Bin x 4 units VRO with conveyor Additionally included are modules from another machine: EFQR Single Sheet Feeder right x 1 unit (One motor mounting plate is missing; the rest is 100% complete) SIGR Continuous Forms Cutter right with K2600 Options Station x 1 unit BFGD Module (only for parts, incomplete, without covers) x 1 unit LM Spacer Module (functional, fully complete) x 1 unit VRO with conveyor (functional, fully complete) x 1 unit

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS TURNING CAPACITY Turning length: approx. 1,000 mm Center height above bed: 200 mm Turning diameter above bed: 400 mm Center height above tailstock: 120 mm Turning diameter above tailstock: 240 mm Nlodpfxe Ad Ha To Ap Doh SPINDLE Spindle bore: approx. 38 mm MACHINE DETAILS MACHINE DATA Machine type: Lead and feed screw lathe Manufacturer: Kern DIMENSIONS AND WEIGHT Length: 2,300 mm Width: 1,000 mm Height: 1,600 mm Weight: 1,000 kg EQUIPMENT Tailstock Steady rest

Condition: good (used), Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Nodpfx Aj Ad Izljp Delh Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: like new (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, turning length: 2,000 mm, turning diameter: 1,100 mm, power: 46 kW (62.54 HP), distance between centers: 2,000 mm, load hours: 1,200 h, Equipment: rotational speed infinitely variable, A DMT CD1100 lathe with Heidenhain control and only 1,200 operating hours is available. The working area offers a swing diameter of approx. 1,100 mm over the bed and approx. 800 mm over the cross-slide. The tool holder is a Multifix D1. The distance between centers is 2,000 mm. The main spindle drive is a motor with 46 kW output at 60% duty cycle and two gearbox stages. Tailstock: - Quill diameter: 125 mm Nljdpfxoxlza Hs Ap Doh - Taper: 6 Morse taper Delivery: Collection by the buyer Payment: 100% via bank transfer immediately upon invoicing, prior to collection All information is non-binding. Subject to prior sale. The machine is sold without any guarantee or warranty claims and remains our property until full payment is received.

Condition: used, Year of construction: 2010, A KERN 5-axis CNC machining center with EROWA Robot Compact is offered. Travel X/Y/Z: 500mm/500mm/400mm, simultaneous 5-axis machining, hydrostatic guideways in the X and Y axes, swivel range: -10° to +110°, feed rate X/Y/Z: 30m/min, max. acceleration: 10m/s², max. spindle speed: 40000rpm, spindle power: 37kW, max. torque: 12000rpm, tool taper: HSK-E40, tool magazine: 50, tool change time: approx. 3s, control: Heidenhain iTNC 530 , laser tool measurement, workpiece touch probe, EROWA PowerChuck P, EROWA Robot Compact year of manufacture 2013 with 70 magazine positions, including 55 positions ITS 72 and 15 positions ITS 148, max. transfer weight pallet incl. workpiece: 30kg, automatic loading and unloading of the magazine also possible during machining, machining medium: oil, belt filter system and max. high-pressure supply 80bar, oil mist extraction system and fire extinguishing system available, machine power-on hours: approx. 86589h, spindle operating hours: approx. 66997h. The machine is available from November 2026. Documentation available. Inspection possible by arrangement. Nlodpfx Apszu Szms Deh

Year of construction: 2007, condition: used, Offered for sale is a CNC lathe with tool turret. Technical specifications: Machine operating hours: approx. 20000h, main spindle bearings replaced at approx. 16000 machine operating hours. Control system: Heidenhain CNC control. Equipped with tool turret, tailstock, various clamping tools, tool holders, collets and additional tools as well as chip conveyor. Inspection possible by arrangement. Nljdpfoz N Halox Ap Dsh

Condition: used, Year of construction: 2018, functionality: fully functional, Heidenhain Manual Plus 620 HSCI Touch control system Swinging diameter over bed: 400 mm Swinging diameter over cross slide: 230 mm Cross slide travel: 220 mm Distance between centers: 1500 mm Turning length: 1310 mm Drive power: 16 kW Spindle head: DIN 55027 - A6 Spindle bore: 64 mm Tailstock diameter: 60 mm Nodpfx Ajza Uq Nep Dolh Tailstock travel: 140 mm Taper: MK4 Tool turret: Sauter, 8 x DIN 69880, diameter 30 mm Multifix B mounted on the front of the slide.

Condition: used, Swing diameter over bed: 560mm, swing diameter over cross slide: 320mm, spindle speed: 900rpm, machine has surface rust, not operational, an on-site inspection is possible, not connected to power. Nsdpfx As Aaln Iep Dslh

Condition: reconditioned (used), Product information "Guide and lead screw lathe Kern D 20 A" Guide and lead screw lathe Kern Type / Model D 20 A Condition: used, technically overhauled in 2026 Technical data: Center height: 215 mm Distance between centers: 600 mm Spindle bore: 50 mm Bed width: 300 mm Spindle speed (12): 31.5 - 1400 rpm Motor power: 4 kW Nlsdey H Iqwspfx Ap Deh Tailstock travel: 150 mm Weight: approx. 1500 kg Dimensions (W x D x H): approx. 2180 x 1180 x 1560 mm Equipment: - Geometry protocol - 3-axis digital display - Emergency stop button - Quick-change tool holder system Multifix - Machine light - Coolant system - Rotating center - Geometry protocol

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,550 h, laser power: 500 W, table length: 3,048 mm, table width: 1,524 mm, travel distance X-axis: 1,524 mm, travel distance Z-axis: 3,048 mm, overall weight: 2,495 kg, total width: 2,083 mm, total height: 1,346 mm, product length (max.): 3,988 mm, table load: 1,000 kg, number of axes: 3, CO₂ laser cutting machine manufactured in 2022. This KERN KER60120-KT500 OPF features a working area of 1524 × 3048 mm and a maximum workpiece height of 50 mm. It includes a powerful 500 W CO₂ laser and offers various work tables for different materials. If you are looking to get high-quality cutting capabilities, consider the KERN KER60120-KT500 OPF machine we have for sale. Contact us for further details regarding this machine. Machine – JustLaser 15.30L-C500-MC • Machine Type: CO₂ Laser Cutting and Engraving System • Configuration: Open Flatbed Gantry Laser System • Maximum Workpiece Height: 50 mm • Maximum Engraving Speed: 3.8 m/s • Maximum Engraving Speed (Metal Cutting Option): 3.2 m/s • Maximum Engraving Speed (Z12 Option): 1.5 m/s • Maximum Cutting Speed: 0.5 m/s • Motors: Brushless DC Servo Motors • Encoder System: Incremental Measurement System • Optics: Air-purged telescope, lenses and mirrors • Standard Lens: 2.5" • Optional Lens: 5.0" • Software: KCAM Laser Software • Interface: G-Code, HPGL, AD-Logic System • Control Board: KLCM Controlboard • Operator Controls: Key Switch, Emergency Stop, Mouse, Keyboard, Monitor and PC Included • Electrical Supply: 3 × 400 V (3L + N + PE), 50/60 Hz • Table Exhaust Requirement: 3000 m³/h • Axis Exhaust Requirement: 1500 m³/h • Maximum Air Pressure: 10 bar • Maximum Inlet Pressure: 12 bar • Maximum Air Flow: 240 l/min • Connection Size: 6 mm • Noise Level: 55 dB • Certification: CE • Operating Temperature: +15 °C to +25 °C • Humidity: 40–70 % Non-Condensing • Environment: Dust-Free • Active Laser Protection Shield • Pressure Sensors • Light Curtain • Interlock Safety System • Metal Cutting Option Included • Capacitive Height Follower • Metal Cutting Table • Copper Nozzle • 2.5" Lens Set • k-vision Print & Cut Camera System • JustAIR High Performance Turbines (2 × 1500 m³/h) Laser Source – Kern Laser Systems • Model: KER50120-4K500 OPP • Laser Type: Sealed-off CO₂ Laser • Laser Power: 500 W (0.5 kW) • Laser Wavelength: 10.6 µm • Supply Voltage: 380–415 VAC • Phase: 3 Phase (4 Wire + Ground) • Frequency: 50/60 Hz • Maximum Fuse Size: 40 A • Full Load Current: 32.3 A • Disconnect Rating: 40 A • Short Circuit Current Rating: 5000 A • Interrupt Capacity: 35000 A • Largest Amp Load: 16 A • Laser Class: Class 4 • Country of Manufacture: USA Chiller – SMC HRS090-AF-40 • Cooling Type: Water Cooling • Cooling Capacity: 5 kW • Refrigerant: R410A • Refrigerant Charge: 1.5 kg • Weight: 136 kg Nodjzbub Dopfx Ap Dslh • Power Supply: 3~ 380–415 V, 50/60 Hz

Year of construction: 2000, condition: used, A lathe with CNC control is offered. Equipped with three-jaw chuck, tailstock, tool holder, cutting fluid supply and machine enclosure. Control: HEIDENHAIN. Inspection possible by prior arrangement. Nledpjz Hn R Ssfx Ap Dsh

Condition: used, Year of construction: 2007, greates pass round over bed 650 mm Swing dia. over traverse guideway 420 mm Distance between centres 2.000 mm control Sinumerik Siemens slide travel X-axis 440 mm slide travel Z-axis 2.000 mm turning speed range - main spindle 1 - 3.000 min/-1 power capacity - main spindel 33 / 27 / 22 kW transmission ratio 2 spindle diameter in front bearing 140 mm spindle bore 106 mm standard chuck diameter 250 - 400 mm spindle head DIN 55026 / A8 turret head 12 pos. turning tool - shaft cross cut 32 x 32 mm rapid traverse X: 5 m/min rapid traverse Z: 10 m/min feed range X: 0,001 - 1.000 mm/min feed range Z: 0,001 - 2.000 mm/min power feed coss 9.000 N power feed longitudinal 12.000 N diameter of quill 100 mm quill travel 200 mm taper of center MK 6 total power requirement 38 kW weight of the machine ca. 6,0 t dimensions of the machine ca. 6,0 x 2,5 x 2,0 m CNC - Lathe DMT KERN - CD 650 / 2000 - only 3,446 operating hours - incl. boring bar with holder for cross slide - incl. face plate 600 mm - incl. traveling steady rest max. 160 mm - incl. fixed steady rest max. 160 mm - incl. fixed steady rest max. 250 mm (not pictured) - incl. fixed steady rest max. 350 mm (not pictured) Nodpfxezp Rvlj Ap Delh - incl. spare parts package - NO additional tools included

Condition: used, Year of construction: 1997, functionality: unexamined, machine/vehicle number: 322379, Cycle-controlled lathe Kern CD 480, year of manufacture 1997, control system Heidenhain MANUALplus. Machine no. 322379. Nledpjz A Ui Tsfx Ap Doh Equipment: Protective enclosure with viewing windows, tailstock with rotating center, Multifix quick-change tool holder, coolant supply, coolant unit, handwheels for the cross slide and longitudinal slide. Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex works; dismantling and loading by arrangement. All information without guarantee.

Condition: used, Year of construction: 1999, functionality: unexamined, machine/vehicle number: 252499, type of input current: three-phase, Cycle-controlled lathe, Kern model, status: in working order, year of manufacture 1999, control system: Heidenhain. Machine no. 252499, connection: 3 x 380 V, 50 Hz, rated current 30 A, control voltage 24 V. Equipment: protective enclosure with viewing windows, three-jaw chuck, Multifix quick-change tool holder, tailstock, coolant supply, handwheels for the cross slide and longitudinal slide. Location: Homburg (Saar), Germany. Inspection by appointment. Price on request, net plus VAT, ex works; disassembly and loading subject to agreement. All information is subject to change without notice. Nedpsz A Ui Hefx Ap Delh

Condition: used, Year of construction: 2010, Technical details: turning diameter: 1000 / 700 mm turning length: 3000 mm Nlodpfx Apor U Skho Dsh face slide travel: 600 mm turning diameter over slide: 700 mm turning speeds: 1-1.800 1/min transmission ratio: 2 spindle: 46 (60%) kW spindle bore: 132 mm quill stroke: 280 mm workpiece weight max.: 2.560 kg total power requirement: 38 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 5 x 2,6 x 1,9 m teach in lathe, PARAT tooling system, SCHUNK ROTA NC 500-160 hydr. power chuck, tailstock, chipconveyor *

Condition: excellent (used), Year of construction: 2012, Partially overhauled Heidenhain Manual Plus 620 control system Nsdpfx Aeyffigjp Delh Working area: Swing diameter over bed: 475 mm Swing diameter over cross slide: 260 mm Cross slide travel: 260 mm Centre distance: 1000 mm Turning length: 880 mm Main spindle drive Drive power – AC motor – 40% duty cycle: 25 kW Headstock Spindle nose DIN 55026: A6 size Spindle diameter in front bearing: 115 mm Spindle bore: 78 mm Speed range (constant V): 1 – 3000 rpm Cross slide Feed rate, cross: 0.001 – 1000 mm/min Feed rate, longitudinal and thread cutting: 0.001 – 2000 mm/min Rapid traverse, cross/longitudinal: 5/10 m/min Tailstock Quill diameter: 70 mm Quill stroke: 120 mm Quill taper: 5 MT

Condition: reconditioned (used), Lead and feed spindle lathe Kern Type / Model: D 20 A Condition: Overhauled Technical data Center height: 215 mm Distance between centers: 600 mm Spindle bore: 50 mm Bed width: 300 mm Spindle speed (24): 31.5 - 1400 1/min Motor power: 4 kW Quill travel: 150 mm Weight: approx. 1500 kg Dimensions (W x D x H): approx. 2180 x 1180 x 1560 mm Equipment: - Geometry protocol - 3-axis digital display Nljdpfxsy H Ecko Ap Dsh - Emergency stop button - Quick-change tool holder system Multifix - Machine light - Coolant system - Follower center

Condition: repair required (used), Year of construction: 2003, Kern lathe CD 402 Baij 2003 in top condition but with control system issues. Nljdsxn Axcjpfx Ap Dsh

Condition: good (used), Year of construction: 2010, Horizontal bed - Prismatic/flat guideway hardened and ground Working range - Swing diameter over bed mm 1000 - Swing diameter over cross slide mm 700 - Slide path flat mm 600 Main spindle drive - Digital AC motor - 60% ED kW 46 Gearbox - ZF planetary gear stages 2 - electrically switched - Mounted outside the headstock Headstock - Spindle head DIN 55026 size A11 - Spindle diameter in front bearing mm 190 - Spindle bore mm 132 - Spindle taper metr 140 - Speed range rpm 1-1800 Cross slide - Feed range flat mm/rev 0.001-1000 - Feed range longitudinal mm/rev 0.001-2000 - Thread pitches mm 0.01-999.9 - Rapid traverse plan/longitudinal m/min 5/10 - from center distance 4000mm m/min 5/7 - Automatic central lubrication - Digital AC servo motors plan and longitudinal Tailstock - Quill diameter mm 125 - Quill stroke mm 280 - Mounting taper MK 6 Nlodpfjr D Nmyjx Ap Deh - Clamping on the bed with clamping screws - Quill actuation and clamping manual - Tailstock roller guide

Condition: excellent (used), 2-Component Dosing System Manufacturer: Hilger & Kern Component A container size: 45 liters, with manual agitator Component B container size: 24 liters Year of manufacture: 1990 Includes mixing gun Nlsdpfxoy Udv Es Ap Doh Transport dimensions: Length: 850 mm Width: 850 mm Height: 1600 mm, including pallet

Condition: ready for operation (used), Year of construction: 2000, Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts. Nodpfxjx Tpytj Ap Djlh

Year of construction: 1990, condition: ready for operation (used), Center height: 230mm, center width: 1500mm, swing diameter over bed/cross slide: 475mm/260mm, max. workpiece weight: approx. 500kg, spindle diameter: 1000mm, spindle bore: 62.5mm, max. chuck diameter: 250mm, travel X/Z: 1330mm/280mm, rapid traverse X/Z: 8m/4m/min, speed: 3150rpm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1600mm, weight: approx. 3300kg, control: Bosch CC 200T. Documentation vorhanden. An inspection on site is possible. Nedpfsxx Ufpjx Ap Dolh

Condition: used, This listing is for a Kern PCB 250-3 Balance. The unit is in full working condition and is ready for immediate release. The Kern PCB 250-3 is a Precision Laboratory Balance that is highly accurate, fully programmable and comes with a range of advanced features for precise record keeping and weighing. The balance is suitable for weighing and counting even the smallest parts. The balance is supplied with an 81mm weighing plate. A built-in recipe function makes determining the exact measurements of a mixture as easy as possible. This mode will allow you to weigh the specific parts of a mixture, record each value and recall your measurements afterwards for reference. Nlsdpfjxx Atzex Ap Doh Pre-tare function - manually subtracts known container weights Fully programmable - configure the balance to measure in special units such as length of thread g/m, paper weight g/m² or similar Percentage determination - store a given weight value (100%) and determine deviations from the target value CAL EXT function - adjust the balance's accuracy with an external adjustment weight RS232 interface - allows the balance to interface with a PC or printer GLP/ISO record keeping of weighing data with date, time and identification number Dedicated Recipe function logs the weight of a tare container plus the recipe's ingredients % Determination mode - calculates % deviations from a target value (100%) Vibration-free weighing - filters out vibrations to maintain stable weight results Supplied with a weighing range of 250g Manufacturer's part: Kern PCB 250-3

Condition: good (used), Kern lathe D 23 V with Forkard lathe chuck Multifix B digital display Nledpfx Apovl Ig Dj Dsh