Used Programmer for sale (1,618)

Condition: new, Telemecanique TSX TPE01 Prom Programmer, unused in original packaging, 100% functional, scope of delivery as per photos Djdpjxah T Ajfx Addecr

Condition: ready for operation (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, TECHNICAL DETAILS Clamping force: 1,600 kN Screw diameter: 55 mm Tie bar spacing: 520 mm Injection pressure: 1,904 bar Mold dimensions (h x v): 520 x 470 mm Platen size (h x v): 710 x 660 mm Shot volume: 523 cm³ Ejector force: 33,000 N Ejector stroke: 150 mm Minimum mold height: 200 mm Maximum mold height: 600 mm Opening stroke: 1,050 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,700 x 1,600 x 2,300 mm Total weight: 10,900 kg Dedpfoxzd Nvjx Addecr Power supply type: Three-phase current Operating hours: 9,585 h EQUIPMENT Display language German CEE socket 16 A CEE socket 32 A Accumulator for increased injection performance 3 freely programmable inputs and outputs each Core pull pneumatic 2x Water manifold Levelling elements Interface for dosing unit Interface for temperature control unit USB interface Schuko socket 10 A Low-wear plasticizing unit Tool heating 24x Note: Machine is sold without material hopper.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, cutting length (max.): 4,300 mm, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,200 mm, plate height: 60 mm, Placing a bid obligates the buyer to collect the equipment by calendar week 02 in 2026. Forklifts and transport aids can be provided by the seller. Up for auction is a combination consisting of two Holzma saws, connected to a Bargstedt storage system. TECHNICAL DETAILS HOLZMA PROFILINE HPL 380 Cutting and Lift Table Data Cutting length: 4,300 mm Lift table cutting size: 4,300 mm x 2,200 mm Maximum panel size for lift table loading: 4,300 mm x 2,200 mm Minimum panel size for lift table loading: 1,200 mm x 400 mm Stack Heights Stack height for lift table, floor installation max.: 560 mm Stack height for lift table, pit installation max.: 780 mm Lift table maximum load capacity: 4 t Roller Rails Roller rail element, 10 tracks: 1 piece Roller rail element, 2 tracks: 6 pieces Clamping Jaws Pitch: 75/275/475/1,075/1,825/2,625/3,425 mm Extraction and Air Cushion Tables Push-off device position: 2,375 mm Air cushion table with rollers 2,160 x 800 mm: 1 piece Air cushion table with rollers 2,160 x 650 mm: 3 pieces Central blower: 1 piece Nozzle duct for air cushion tables: 70 x 70 mm HOLZMA PROFILINE HPP 380 Cutting Data Cutting length: 4,300 mm Cutting width (programmable pusher travel): 4,250 mm Saw blade projection: 95 mm Combi and Clamping System Combi profile rail element, 2 tracks: 9 pieces Clamping jaws: 7 pieces Pitch: 75/275/475/1,050/1,850/2,650/3,450 mm Manual trimming stops on clamping jaws: 4 pieces (positions 75/475/1,050/2,650 mm) Air Cushion Tables and Extraction Air cushion table with roller element 2,160 x 650 mm: 4 pieces Central blower: 1 piece Nozzle duct for air cushion tables: 70 x 70 mm Feed and Programmable Pusher Saw carriage feed forward: 1–130 m/min Saw carriage feed reverse: constant 130 m/min Programmable pusher speed forward: 80 m/min Programmable pusher speed reverse: 80 m/min BARGSTEDT PROFILINE TLF 420 Panel thickness: 3–60 mm Maximum panel size: 4,300 mm x 2,200 mm Maximum traverse length: 5,200 mm Measuring and Correction System Length measurement: integrated Width measurement: integrated Automatic rotation correction: available Note: Further technical details can be found in the attached order confirmations. Dodpfjxy Ng Rex Addscr

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 41,657 h, controller model: SINUMERIK 840 D SL, laser power: 5,000 W, working length: 3,000 mm, working width: 1,500 mm, TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 116 mm Laser power: 5,000 W MACHINE DETAILS Control: SINUMERIK 840 D SL Operating hours Total operating hours: 67,508 h Laser on hours: 41,657 h Current laser output (as of 27.04.2023): 5,335 W EQUIPMENT Torque drive in combination with linear direct drives Enclosed beam guidance via laser light cable (LLK) Machine cooling unit (water-air) Integrated control cabinets with internal lighting Automatic pallet changer (longitudinal direction) 17" touch colour display Wide longitudinal conveyor belt TruDisk power supply via the machine Workspace illumination Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Solid-state laser TruDisk 3001 with 1 LLK output LLK according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Universal cutting unit with fully adaptive lens system Cutting head strategy Protective glass against lens contamination Condition monitoring of protective glass ControlLine: height control and sheet outer edge detection Simple shop programming Extended shop programming Fast re-production Integrated technology data Automatic shut-off Programmable cutting gas / pressure selection FastLine FlyLine AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact dust extraction system Dodpfx Adsx A Hagsdjcr Machine enclosure, certified viewing window, right-hand door Electric roller roof

Condition: like new (used), functionality: fully functional, The Weber Slicer 305 is positioned as a powerful, compact, entry-level solution to high-tech industrial slicing, designed for low-to-medium volume production with maximum flexibility and hygiene. Performance & Precision Dcsdpjxxlhujfx Addsr High Slicing Speed: Features a circular blade cutting system with a maximum cutting speed of 400 slices per minute (rpm). Wide Thickness Range: Offers great flexibility in product output with a cutting thickness ranging from 0.5 mm up to 50 mm. Versatile Slicing Presentations: Capable of producing a variety of presentations, including stacked, staggered stack, shingled, cross-shingled, endless shingled, and folded portions. Product Capacity: Can handle product lengths up to 800 mm with a slicing throat width of 250 mm and height options of 125 mm. Operational Benefits Ease of Operation: Described as easy to operate and "Plug & Play" (for the Basic model).Intuitive Control: Uses the Weber Power Control with a programmable touch screen color touch display for the Basic), ensuring rapid product changeovers. Superior Hygiene: Built with Weber Hygienic Design, which includes open designs and easy-to-clean components for simplified washdown. Quick Set-up Time: Allows for fast format and product changes via tool-less adjustable components. Ergonomic Blade Change: Includes a pivotable blade safety cover for safer and ergonomic blade changes. Manual Loading: Features manual loading, making it particularly suitable for small batches, frequent product changes, or special formats.

Condition: ready for operation (used), Year of construction: 2013, Auto CNC Lathe TORNOS DECO SIGMA 20/6 6 axis Year 2006/2009 (2x) /2011/2013 (3x) Controller : Faunc 31i c/w 3 meters bar feeder Installed power: 14 kva Dsdpfx Ajxz Takoddecr Technical Machine Benefits Max bar diameter: Ø 20 (25. 4) mm max workpiece length: 200 mm (turning with guide bush) Tool slide at guide bush: number of tool positions at guide bush (fixed or rotary): 15 Tool shank section: 16 x 16 mm Max. Number of cross rotary tools at guide bush: 4 Programmable rotary tool speed for s11: 100-6000 rpm Max. Rotary tool drive power: 1. 5 (2. 2) kw Counter spindle and operations on the second side: max. Number of tool positions for second side operations: 11 Max. Number of fixed and rotary spindles: 4 Programmable rotary tool speed for s41: 100-6000 rpm Max. Rotary tool drive power: 1. 5 (2. 2) kw 6 units of Tornos & 1 unit of Tsugami as 1lot

Condition: used, mileage: 7,40,000 km, power: 338 kW (459.55 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: intarder, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: AdBlue, central locking, cruise control, differential lock, fog lights, spoiler, = Additional options and accessories = - CD Dodpfx Aew D Ev Sjddscr - Electrically operated mirrors - ESP - Immobiliser - Mirror heater - Spoilers - Sun visor - Tachograph = Remarks = Model description: IVECO AS440S46T/P A/T with Adblue Euro 6 MY 2017 Tractor Head Code Diesel Body: Tractor Head Unit Exterior Color: White Kilometer: 740,000 km less than Interior Color: Med. Grey Max Axle Load: 8,000 / 13,000 kg ADblue tank 135L Electronic Braking System Emergency Brake Assist Lane Departure Warning System LED daytime running lights Mobile Phone preparation Bluetooth Fifth wheel Electr. And headed rear view mirrors Rear differential lock Electr. Stability Programm ESP Air Suspended front seats Electronic Stability Programm ESP = More information = Number of cylinders: 6 AdBlue tank: 135 l

Condition: new, power: 250 kW (339.91 HP), Year of construction: 2025, The Multiple Cylinder Hydraulic Cone Crusher is an advanced type of cone crusher designed to provide higher productivity and better crushing performance than traditional single-cylinder cone crushers. Here are some key features and information about multiple cylinder hydraulic cone crushers: 1. Structure and Working Principle: - Multiple cylinder hydraulic cone crushers typically have three or more cylinders. - The crushing chamber is formed between the mantle (outer fixed cone) and the concave (inner moving cone). - The cylinders control the movement of the inner cone, providing a highly efficient and uniform crushing process. 2. Hydraulic System: - Each cylinder is equipped with its hydraulic system, allowing for independent control of the crushing chamber. - The hydraulic system is used for adjusting the discharge opening size, controlling the tramp iron release, and providing overload protection. 3. Adjustable Discharge Opening: - The discharge opening can be easily adjusted to control the size of the crushed product. 4. Automation and Control System: - Multiple cylinder hydraulic cone crushers often feature advanced automation and control systems. - These systems can include programmable logic controllers (PLCs) and human-machine interfaces (HMIs) for convenient operation and monitoring. 5. Application: - Multiple cylinder hydraulic cone crushers are suitable for crushing hard and medium-hard materials in industries such as mining, metallurgy, building materials, and road construction. - They are particularly effective for crushing materials with high hardness and abrasive index. 6. Advantages: - Higher crushing efficiency and throughput compared to single-cylinder cone crushers. - Better shape of the crushed product due to the uniform crushing action. - Improved reliability and maintenance convenience. - Enhanced safety features with the hydraulic system providing overload protection. 7. Disadvantages: - Potentially higher initial cost compared to single-cylinder cone crushers. - May require more complex maintenance and repairs. 8. Models and Specifications: - Multiple cylinder hydraulic cone crushers come in various models, such as HPT series, HP series, and others, each with different specifications. 9. Manufacturers: Dcedpfxjq Nd Rbs Adder - Various manufacturers produce multiple cylinder hydraulic cone crushers. Well-known manufacturers often provide reliable and high-quality equipment. When considering a multiple cylinder hydraulic cone crusher, it's essential to assess your specific needs, compare features of different models, and consider factors such as capacity, feed size, and required end product specifications. Additionally, check the reputation and customer feedback regarding the manufacturer and model you are interested in.

Condition: new, Year of construction: 2025, -Custom-Made Machines Tailored to Your Production Needs -Our custom-made machines are meticulously designed and engineered to meet the unique demands of your production processes. Whether your focus is finishing, oxide removal, or radius edge rounding, these machines deliver outstanding precision and performance. -Finishing: Achieve smooth, high-quality finishes on a wide range of materials, ensuring a consistently professional, polished appearance -Oxide Removal: Effectively eliminate surface oxides to provide a clean, contaminant-free surface—essential for further processing or coating applications. -Radius Edge Rounding: Precisely round edges to your specified radius, enhancing both safety and the overall quality of your finished products. Customization Options Each machine is tailored specifically to your requirements, offering flexibility in: Processing Speeds: Adjustable to match your varying production demands Dsdpohq Dbxjfx Addscr Special Features: Options include dust and fume extraction systems, adjustable pressure settings, and programmable configurations designed to optimize your workflow Built for Durability. Constructed with longevity in mind, our custom machines are built to perform reliably through extended production cycles. Whether for small-scale projects or high-volume industrial applications, these machines provide exceptional results, year after year

Condition: good (used), Wohlenberg 92 Paper Guillotine The device is in perfect condition, very low mileage. An unusual machine on the market. This is the newest model, currently in production. In one hands from new. Under a service contract until the very end. Year of production 2011. Technical data: Cutting width: 920 mm Stack height: 120 mm Djdjw Ht Uhopfx Addecr Weight: 2000 kg Power supply: 400 V Equipment: – programmer with 19” touch screen monitor – CIP-3 and CIP-4 operation, visualization of cutting on the monitor – memory expansion via USB, possibility of connecting the machine to the network – photocells – air table – cutting line – chrome table surface – rear saddle control on a servo motor – super fast work, always stops at „0” – hydraulic clamp with smooth force regulation – user manual – set of tools – sheet metal for clamp – tapping block – spare knife

Condition: good (used), Horizon APC-T61 Hydraulic guillotine The machine is practically new, fully operational, ready for production. High-performance, precise hydraulic cutter – for small and medium-sized printers, bindery and digital printers. Equipped with programmable control, designed for low-cost, frequently changing orders. Control: Ability to save programs to memory electronic digital display with an accuracy of 1/10 mm starting the program with the „start” button Knife beam and hydraulic pressure drive Dodpfxevfukie Addocr cutting line pressure plate for cutting delicate materials foot pedal for measuring the pressure safety covers on the rear table Technical data: Cutting length 610 mm 620 mm batch depth Pile height 100 mm Power supply 380V / 50Hz 3 kW power Weight 700 kg The set includes: spare knife, shaft, operating tools, tapping block, manual.

Condition: good (used), Polar Mohr 78 XS Paper Cutting Guillotine Machine in very good condition, after inspection, ready to work. Technical data: Dcodpfxsw D E R Ne Addjr Cutting width 780mm Stack height 120mm LCD display Full programmer Power supply 400V Weight 1400kg Side tables Chrome table surface Table backlight and optical cutting line Smoothly adjustable pressure force Additional covers for the rear table Spare knife, sticks, tapping block, operating tools.

Condition: good (used), Ideal 7260 Hydraulic Paper Guillotine Machine in very good condition, ready for production. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine has a 721 mm knife length and is equipped with infrared safety curtains, a hydraulic hold-down device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable program with 99 steps each, electronic saddle position reading with 1/10 mm accuracy, and a self-diagnostic system with error messages displayed on the screen. The machine’s main work table is made of stainless steel and has a blower. A paper ejection function is included for ease of use. Technical data: Cutting length 721 mm Infeed height 80 mm Infeed depth 720 mm Front table depth 530 mm Minimum final offcut 20 mm Minimum final offcut with beam guard in place 90 mm Power supply 400 V / 50 Hz 1.5 kW Weight 588 kg Dimensions 1335 x 1305 x 1540 mm Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator (Laser), Air table (on front and rear tables), Djdpfoxmvaqsx Addjcr Pedal for pre-marking the cutting line, Front table made of chrome-nickel steel, Blade made of high-quality HSS steel, Safety features ensured by: safety curtains – photocells transparent safety cover on the rear table safe drive – IDEAL patent two-handed, electronically controlled cutting start automatic knife return from any position main switch equipped with a key switch knife replacement possible with the blade permanently covered

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: Dcsdpoxzulzofx Adder – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: good (used), Polar Mohr 115 EMC Paper Cutting Guillotine The machine is fully operational. Inspected and ready to use. Technical specifications: Cutting width: 1150mm Dedpfexzul Ujx Addocr Stack height: 165mm Programmer Air table Photocells Side tables Additional rear table guards Weight: 3200kg 380V power supply Tool kit, safety knife change tool, tapping block, spare knife, and one in the machine.

Condition: good (used), Polar Mohr 56 ECO Guillotine Manufactured in 2013. The machine is ready for production, after a service. Mohr Polar is the most recognizable and highly valued brand of bookbinding guillotines in the world. Made in Germany. Working width: 560mm Stack height: 80mm Machine weight: 575kg Power supply: 230V Equipment: Programmer with a 5.5″ display and the ability to save 198 programs Chrome-plated table Photocells Intuitive operation Documentation, tools, spare knife, and cutting sticks. Dcodpfsxzumrox Adder

Condition: good (used), Wohlenberg 132 TS ASE Paper guillotine Machine in perfect condition, ready for production. Year of manufacture 2015. Available immediately from stock. Equipped with the ASE automatic trim removal system. The guillotine can be used as a stand-alone unit or integrated with cutting systems. Program generation takes place in the menu and includes a variety of cutting tasks, e.g. Single cut, Programming, Multiple cut, Non-cutting pressure, Automatic actual value transfer. Wohlenberg premium cutting machines are manufactured in Solms, Germany. Distinguishing features of the Wohlenberg machine: – Interactive user interface – 18.4” touch screen – MIS integration (optional) – USB interface – Ethernet interface – Windows CE operating system – CIP data module – Positioning via electronic handwheel – Optimized cutting cycle – Programmable hold-down pressure – Automatic adjustment of the hold-down pressure to the cutting width – Automated knife change from the front – Quick knife change – New machine body cast in one piece = higher stability Dcodpfswt Sq Usx Addor – Maintenance-free electromagnetic clutch Technical data: Cutting length: 1320 mm Maximum stack height: 165 mm Infeed depth: 1325 mm Smallest cut with sheet metal under the pressure beam: 77 mm Smallest cut without sheet metal under the pressure beam: 20 mm Maximum saddle feed speed: 300 mm/s Maximum mechanical efficiency of the knife: 44 cycles/min Saddle guidance: above the work table Main engine power: 4.5kW Net weight: 3410 kg The machine is equipped with a spare knife, sticks, a pressure plate, documentation, tools, and a conveyor belt.

Condition: good (used), Laminating machine Matrix MX 530 Machine in very good condition, comes from a small digital printing house. The set with the machine includes foil and user manual. Description: MATRIX is a semi-automatic laminating machine for hot laminating with a built-in sheet separator. The device is designed for laminating digital or offset prints in low and medium circulation. It can be operated by one operator at a speed of up to 10 m / min. Additional advantages are quiet operation and a small area it occupies in the printing house. Dodpovkt N Iofx Addocr Key features of the device: Semi-automatic mode (the operator feeds the sheets onto the table, the next cycle is automatic) Multi-level, adjustable „anti-curling” roller system straightening the sheets Built-in, automatic sheet separator The device is suitable for both digital and offset printing Quick format changes and easy replacement of film rolls (3000m rolls) Device operation cycle: The programmer allows you to adjust the speed, overlap length and temperature The operator feeds the sheets manually The sheets are automatically taken by the rollers according to the set overlap Ready, separated sheets are delivered to the receiving tray Maximum film width 500 mm Maximum paper width 530 mm Maximum paper length 1200 mm Minimum paper format 200 x 300 mm Laminating speed up to 10 meters per minute Front table dimensions 668 x 542mm Paper weight 115-350 g/m2 Temperature 80 – 130 °C Warm-up time 10-15 minutes Dimensions 84x210x131.5cm Power consumption 1.5-2kW Power supply 230V,50Hz Weight with base 194/260kg

Condition: good (used), Mohr 66 Plus Polar Guillotine This machine is ready for production, after a complete overhaul, and in like-new condition. Dsdpsxmu Umjfx Addocr Manufactured in 2016. Mohr Polar is the most recognizable and highly valued brand of bookbinding guillotines in the world. Made in Germany. Working width: 660mm Stack height: 80mm Machine weight: 620kg Power supply: 380V Equipment: Programmer with an 18.5″ display and the ability to store 1998 programs Chrome-plated table Photocells Air table Intuitive operation Documentation, tools.

Condition: good (used), Polar Mohr 115 XT Paper Cutting Guillotine This machine is in very good condition, ready for production, after a service inspection. Low mileage. Year of manufacture: 2010. This is the most valued guillotine brand, a flagship product. A jogging and elevator are available for retrofitting. Dcodpexzumxefx Addsr Technical specifications: Cutting width: 1150mm Stack height: 165mm Programmer with a 15″ color touchscreen display Air table Photocells Chrome table surface Ball screw drive for the rear comb Optical cutting line Enlarged side tables Knife change via the control panel Additional rear table guards Weight: 3200kg 380V power supply Includes documentation, a tool kit, a tapping block, a spare knife, and one knife in the machine.

Condition: good (used), EBA 721-06 LT Paper Cutting Guillotine The machine has been serviced and is ready for operation. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine, with a 721 mm knife length, is equipped with infrared safety curtains, a hydraulic pressure device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable timer and electronic saddle position readout with an accuracy of 1/10 mm. The machine’s main work table is made of stainless steel with a blower. Technical data: Cutting length 721 mm Infeed height 78-80 mm Infeed depth 720 mm Power supply 400 V Weight 620 kg Dcodpfjx A Sddox Adder Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator, Air table (on front and rear tables), Pedal for pre-marking the cutting line using the clamp or optical cutting indicator, Solid, adjustable steel knife carrier, Blade made of high-quality HSS steel. Safety features include: „Safety curtain” – a photocell in the front table, Transparent safety cover on the rear table, Safe drive – IDEAL patent, Electronically controlled two-handed cutting start, Automatic knife return from any position, Main switch equipped with a key switch. Key-operated Knife replacement possible with the blade permanently covered The set includes: a safety knife change tool, operating tools, a paper tapping tool, and a spare knife.

Condition: good (used), Polar Mohr N92 PRO HD Paper Cutting Guillotine Machine in perfect condition, serviced, and ready to work. Manufactured in 2021. Unprecedented model on the market. Cutting visualization on the monitor. Technical specifications: Cutting width: 920mm Stack height: 130mm Programmer with a 21.5” HD color touchscreen display 400V power supply Weight: 2000kg Enlarged side tables Chrome table surface Dcsdpfsxmvdpjx Adder Table backlight and optical cutting line Flexibly adjustable clamping force Additional rear table covers Spare knife, cutting sticks, tapping block, and operating tools.

Condition: new, Die cutting machine TYMC-1200 with hot stamping The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Weight 6000 kg Operating speed 23 cycles/min Foil travel 1-820mm Operating temperature 1-150’C Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving – central lubrication – additional safety covers – photocells – operating tools and instructions, CE declaration – sheet for pressure Machine available immediately Dcodpfjwxtb Eox Addsr 12-month warranty.

Condition: good (used), Durselen Corta PB-01 STE Automatic paper drill The device is in very good condition, ready to work. This is one of the newest Durselen models, the most advanced model. Production Germany. 6 drilling heads with adjustable spacing. The machine has a pneumatic drill cooling system and lubrication. A programmer for controlling the table that allows you to approach programmed distances. Smooth regulation of spindle speeds and smooth regulation of the speed of lowering the heads. Waste disposal compressor Sliding column system on a tape. Dedpfxju Ul Hns Addocr Technical data: Drill diameter: 2-10 mm, Stack height: 60 mm, weight: 400 kg Power supply 380V Automatic drilling cycle, controlled by a foot pedal. Solid construction on a pedestal. Waste is directed to the external pocket. The set includes operating tools, instructions, drills and sharpener.

Condition: good (used), Paper cutting guillotine QZYK 1370 DH-1520 The machine is fully functional, in perfect condition. After inspection, ready to work. Year of production 2022. This is the highest quality copy of the Polar Mohr guillotine. Technical data: Cutting width: 1370mm Stack height: 165mm Programmer with color display Air table Photocells Chrome table surface Ball screw drive of the rear comb Optical cutting line Enlarged side tables with aeration Weight: 4200kg 380V power supply Dsdpfewt Sr Sox Addecr The set includes documentation, a set of tools, a tapping block, a spare knife and one in the machine.