Used Ks 205 for sale (56,798)

Condition: new, machine/vehicle number: NEW - 50, maximum load weight: 777 kg, overall weight: 1,000 kg, axle configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,130 mm, loading space height: 430 mm, Year of construction: 2024, New series ! Braked single-axle low loader with wooden drop sides and steel rails on the side drop sides and on the front drop side, rear drop side can be folded down, lashing bracket on the side in V-groove, 13-pole electrical system, plastic mudguards plus vehicle registration document and freight to Gera € 100 net Optional accessories at extra cost: equipment for 100 km/h approval, H-frame, leaf grille, tarpaulin and bows, flat tarpaulin and much more. Rcedpjrk Ikqjfx Aabeh

Condition: new, Year of construction: 2024, Sanding belt size: 150 x 2280 mm Rcsdpedq H D Ssfx Aaboh Engine power: 2,2 kW Abrasive belt oscillation pneumatic belt tension Swiveling grinding unit 90 ° / 180 ° Additional table on pulley

Year of construction: 1986, condition: ready for operation (used), machine/vehicle number: 1602097, A used flame cutting machine (3000 x 1800 Corta) from the manufacturer Messer Griesheim. Type: CORTA KS 1500/2000 Machine number: 1602097 Year of construction: 1986 Rcsdpjd Eg Tlsfx Aaboh Machine connection: 220 V, 50/60 Hz, 1.0 kVA

Condition: used, empty load weight: 6,460 kg, overall weight: 29,000 kg, axle configuration: 2 axles, first registration: 08/2013, loading space length: 13,480 mm, loading space width: 2,480 mm, loading space height: 2,800 mm, loading space volume: 94 m³, tire size: 385/55 R22,5, wheelbase: 1,910 mm, color: white, Equipment: ABS, EBS Disc brake Payload 22,540 kg Air-lift suspension Last axle positively steered DC axles Lifting and lowering device Rodouu Rv Nspfx Aaboch Errors excepted

Condition: used, Used, good condition Brand Wegoma Rcedpfx Aswkvxwjabeh Type KS2250 GS wood dust tested Motor 2.25 kW Oscillation Front table approx. 620 mm x 220 mm Unit tiltable 0-90° Belt length 2250 mm x 150 mm Belt width 150 mm Belt speed 20 m/sec. Miter stop Round edge sanding device Extraction connection D 120 mm Space required approx. 1250 mm x 800 mm x 1200 mm Weight approx. 100 kg Storage location 97447 Gerolzhofen, free on load, unpacked Handed over in the current condition as seen, without guarantee or warranty

Condition: excellent (used), Year of construction: 2022, operating hours: 4,000 h, functionality: fully functional, overall weight: 3,620 kg, total length: 173 mm, total width: 2,990 mm, total height: 2,150 mm, motor manufacturer: Siemens, power: 110 kW (149.56 HP), volume flow: 19.47 m³/h, operating pressure: 9 bar, pressure (min.): 6 bar, pressure (max.): 10 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, noise level: 69 dB, protection type (IP code): IP55, type of cooling: water, Equipment: refrigerant dryer, type plate available, Very well maintained machine from a company liquidation. Compressor and attached dryer were always serviced by the manufacturer. Machine location in Ulm. Viewing possible by arrangement, but not connected. Freight costs by arrangement. Rcodpfx Aaovtyiasboh

Condition: new, functionality: fully functional, empty load weight: 187 kg, maximum load weight: 813 kg, overall weight: 1,000 kg, axle configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,130 mm, loading space height: 350 mm, Year of construction: 2024, New model, braked single-axle low loader with aluminum drop sides. Rear dropside can be folded down. Lashing eyes on the side of the loading floor. Groove profile in dropside for attaching rope hooks and S-hooks. 13-pin electrical system, plastic mudguards plus vehicle registration document and freight to Gera € 100 net Optional accessories at an extra charge: cover can be folded backwards/sideways, equipment for 100 km/h approval, H-frame leaf grid, tarpaulin and bows, flat tarpaulin and much more. Exemplary pictures Rcjdeuyg Ugopfx Aabsh

Condition: used, Year of construction: 1993, Hydraulic side shift Trailing roller PTO shaft / Rodpjual S Iofx Aaboch

Condition: good (used), Year of construction: 2006, Console robot Robot KUKA KR16 KS KRC2ed05 Year 2006 Euromap 67 Extension not available in picture Controller: KRC2ed05 Number of axes: 6 Max. Load capacity: 16 kg Max. Working range: approx. 1800 mm Year of construction: 2006 Scope of delivery: Robot, control unit, cable, teach panel, circuit diagrams. 2 weeks commissioning guarantee. No further warranty. Spare parts are always available from stock. Robot is fully functional and can be inspected on request Auction amount is ex works, free loading. You will receive a proper invoice with VAT shown. Further questions will be answered by e-mail or telephone. Rodpfx Aou Dxdnoabsch The amount stated is net. The statutory VAT of 19% will be added at checkout. You will receive a proper invoice with VAT shown.

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 7,900 h, machine/vehicle number: #652, load capacity: 350 kg, mast type: telescope, lifting height: 28,000 mm, platform length: 1,800 mm, platform width: 800 mm, overall weight: 7,490 kg, transport length: 7,550 mm, transport width: 2,500 mm, construction height: 3,450 mm, Attention: This rental fleet machine is expected to become available in January 2026. Working height: 30.00 m Platform height: 28.00 m Lateral reach: 20.50 m Overall length: 7.55 m Overall height: 3.45 m Rjdpfewnq Dpex Aabjch Overall width: 2.50 m Platform capacity: 350 kg Permissible total weight: 7,490 kg Work basket (l x w x h): 1800 x 800 x 1100 mm Swivel range: 540° Basket rotation: +/- 85° Stabilizers: 2.56 / 3.90 / 5.10 m Other: - Basket arm 195° - Crank rotary table - Automatic basket arm rest - Roof protection grid 04/2024: Clutch + master-slave cylinder replaced and oil pan & fuel filter sealed 09/2024: Right joystick module replaced 10/2024: Fuel filter, basket tilt sensor replaced 11/2024: Rotary encoder replaced 01/2025: 2x truck battery replaced 04/2025: Solenoid coil As of 28.04.2025: approx. 73,000 km, approx. 7,900 operating hours Price: ON REQUEST

Condition: used, Year of construction: 1998, with parallelogram cross tableDigitalused, good conditionMake KoelleType KS 340Year of construction 1998CE type testedTrolley length approx. 3115 mmCutting width approx. 1000 mmswiveling up to 45°scoring unitDigital display:- Rip fence- angle stop- Parallelogram tableExtraction connection D 120/80 mmRequired space approx. 3300 mm x 1900 mm x 1600 mmStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seen,without guarantee and guarantee Rsdpfjvxr Tbex Aabsch

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 1,500 kg, construction width: 1,200 mm, Rotator Rcjdpfou D N Rfsx Aabjh Load center of gravity: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Technical condition: New Description: Rotator 205 degrees, for complete emptying of all containers, load capacity 1500 kg, fixed/folding support arm, incl. hoses & quick couplings available from stock

Condition: used, Year of construction: 2021, number of beds: 2, _____Basic equipment:Base frame for mounting on carrier vehicle with technical compartment for protected storage of components- 60001 GRP safety tank with baffle walls- 6-cylinder piston diaphragm pump with hydraulic drive from vehicle min. 40 l/min incl. 21/2" suction fitting with external suction via Storz C-coupling and pressure switch fitting- Spray bar with 1" stainless steel nozzle line mounted at the rear, incl. tip protection in front of spray bar- Manually operated triple nozzle holder for turning with 3-fold nozzle set for different application rates- Limit switch for safe filling- 2" external filling connection with Storz C-coupling and pressure switch fitting Manually operated triple nozzle holder for turning with triple nozzle set for different application rates- Limit switch for safe filling- 2" external filling connection with Storz C-coupling- Low-level drain tap with Storz C-coupling- Mechanical fill level indicator- Electro-pneumatic pressure filter flushing- Plug-on RKL at the rear- Position lights on spray bar left and right: front white, rear red- The nozzle carrier can be switched on and off pneumatically to prevent dripping- The application rate is controlled and monitored fully automatically via a Spray-Dos computerMore equipment:- Draw hook: base frame as draw hook design- Spray bar can be folded up- Spray bar 2.50 m- Pump capacity 320 l/min 2 1/2" suction filter Rcjdpfeuw Dnxex Aabsh

Year of construction: 2006, condition: like new (used), - Power operated three jaw chuck D400 - Large bore D168 - Centrifugal force compensation - Base jaw connection serration 1/16", 90° - incl. jaw sets Rcjdeh Igt Espfx Aabeh => Jaw chuck was only used for a few days

Year of construction: 2019, condition: new, New SIAG Lime Silo For outdoor installation, with a usable capacity of 16 m³ CaO including: • Safety devices, • Over/under pressure flap, • Demand, full and empty detector • Filling line with B-coupling connection for tanker charging, • Dust filter with at least 17 m² filter area and mechanical shaking device Rcjdpfx Aaenyh Tvjboh • Ladder with safety cage (without intermediate platform), • Emergency shut-off device, • Connection flange for silo discharge dosing device, • Silo support frame with standing frame and walkway. Technical features: • Manufacturer: SIAG • Type: KS-ST 19 • Net volume: 16 m³ • Diameter: 2,400mm • Total height: approx. 8,000 mm • Dust filter: 17 m² • E-connection silo attachment filter: 0.13 kW • 1 x Lime Discharge dosing system For even discharge/dosing of CaO from the lime silo. With a mounting device on the silo outlet flange, conveying length 800 mm.

Condition: used, Year of construction: 2012, overall weight: 1,310 kg, load capacity: 205 kg, arm reach: 2,750 mm, controller model: IRC5, repeat accuracy: 0.05 mm, Payload: 0/205 Kg Arm reach: 2.75 mmNumber of Axis: 6 Repeatability: 0.05 mm Robot weight: 1310 Kg Mounting: Floor Rjdpsh D Sz Tjfx Aabech

Condition: used, axle configuration: 3 axles, first registration: 12/2004, color: other, Year of construction: 2004, Empty weight: 8.280 kg Axle 1: left 5 mm right 5 mm Axle 2: left 5 mm right 5 mm Axle 3: left 5 mm right 5 mm Rsdpfx Aswl D Sbeabech

Condition: excellent (used), Catalogue number 7280 TECHNICAL DATA - track width: 340mm - shaft width: 400mm - max blade diameter: 350mm - blade bore diameter: 80mm - max cutting height: 120mm - table width with clearance: 700mm - table length: 1720mm from above: - pawls - metal slip pressure roller - pawls - metal slip pressure roller - shaft with saw blades - 2 pcs metal slip pressure rollers from below: - guide bar - metal slip roller - pawls - track Rodpfjrwl Egex Aabjch - electric body lifting 0.55kW - central lubrication - variable feed speed control 1.5kW - main motor 37kW - dust extraction nozzle diameter: 200mm - overall dimensions (L/W/H): 1800x1670x1780mm - weight approx. 2500kg – German made – Used multi-blade saw, in very good condition Original photos Net price: 76,900 PLN Net price: 18,300 EUR (depending on an exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: used, For sale, KSB KRTK pump Parameters: Rcodpfev Dx Agox Aabeh - Capacity: - 450.000L/h - Engine power: 9 kW - Rotation speed: 955 rpm. -///// PRICE IS FOR 1 PCS./////

Year of construction: 2008, condition: ready for operation (used), General Data Measurements width 2340 Measurements depth 5210 Measurements height 2450 Machine weight 18700 Control Unit Brand CYBELEC Main Drive Main motor power 30kW Number of axis 4 Max Material Thickness Stainless steel 0.5 to 10 mm Aluminium 22 mm Rjdpfsxpyvnjx Aabsch Additional Equipment Oil cooling system rear light barrier Documentation This ERMAKSAN HVR 3100-16 was manufactured in 2008. A robust sheet metal machine with a motor power of 30kW and a cutting capacity of up to 16mm for black steel. Features include CNC control with 4 axes, hydraulics, and an oil cooling system. Ideal for handling stainless steel and aluminum. If you are looking to get high-quality sheet metal capabilities, consider the ERMAKSAN HVR 3100-16 machine we have for sale. Contact us for more information. Application Types Shearing

Condition: excellent (used), Model: EM6-50MT Year of manufacture: 2008 Rcedpfx Aaoxqm Nkobeh Serial number: 58060 Dimensions: 600 x 300 x 550 Corrugated cardboard cutting machine with cutting and winding tools, unwinder, work table, control cabinet, and operator terminal.

Condition: excellent (used), Catalogue number 7446 TECHNICAL DATA - Track width: 340mm - Roller width: 400mm - Max. saw blade diameter: 350mm - Saw blade bore diameter: 80mm - Max. cutting height: 120mm - Table width with clearance: 700mm - Table length: 1720mm From above: - Pawls - Metal slip pressure roller Rcedpfx Ajug Ulqjaboh - Pawls - Metal slip pressure roller - Shaft with saw blades - Two metal slip pressure rollers From below: - Guide bar - Metal slip roller - Pawls - Track - Central lubrication - Variable feed speed adjustment 1.5kW - Main motor: 37kW - Extraction outlet diameter: 240mm - Overall dimensions (L/W/H): 1900x1750x1980mm - Weight approx.: 3000kg ADVANTAGES – German made – Variable speed control – Insert for short workpieces – Used multi-blade saw, in very good condition Net price: 79,900 PLN Net price: 19,000 EUR depending on exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7615 Technical data: - Inlet width: 550 mm - Inlet height: 200 mm - Shaft width: 570 mm - Knife length: 570 mm - Number of knives: 2 pcs - Sieve dimensions: 60x120 mm - Toothed feed roller, lower split type - Lower feed roller motor: 2.5 kW - Toothed feed roller, upper - Upper feed roller motor: 2.5 kW - Vibrating chute: 2.2 kW - Vibrating chute length: 3200 mm - Vibrating chute width: 490 mm - Main motor: 45 kW - Auto-reverse - Reverse function - Extraction spigot diameter: 250 mm - Machine overall dimensions (L/W/H): 2100x2000x1100 mm - Vibrating chute overall dimensions (L/W/H): 3200x700x600 mm - Weight approx.: 3500 kg ADVANTAGES – Wide feed opening – Auto-reverse (adjustable) Rodpfowa Al Nox Aabech – Reverse function – Used shredder, in very good condition Net price: 119,900 PLN Net price: 28,550 EUR (based on 4.2 EUR exchange rate) (Prices may change with strong fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 7480 Technical data: - Track width: 360mm - Shaft width: 350mm - Max. disc diameter: 350mm - Disc bore diameter: 80mm - Max. cutting height: 120mm - Table size: 2040x1220mm Top section: - Pawls - Driven, toothed shaft - Pawls - Shaft with saw blades - Slip/pressure shaft Bottom section: Rjdpfjuzu T Tex Aabech - Rollers in front of the table, 2 pcs - Guide rail - Pawls - Track - Central track lubrication - Electric lifting of the saw shaft - Electric body lifting - Stepless feed speed control - Extraction port diameter: 140mm, 160mm - Main motor: 30kW - Overall dimensions (L/W/H): 2600x2300x1850mm - Weight approx. 4000kg ADVANTAGES – Czech manufacture – Used multirip saw – Very good condition Net price: 33,900 PLN Net price: 8,070 EUR (depending on the 4.2 exchange rate) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalog number 7308 TECHNICAL DATA Rodpfx Aaor Iildsbech - Track width: 250 mm - Roller width: 350 mm - Roller diameter: 80 mm - Max. saw blade diameter: 400 mm - Saw blade bore diameter: 80 mm - Max. cutting height: 150 mm - Table width with clearance: 700 mm - Table length: 1790 mm Top, in order: - Pawls - Pressure roller, slip type - Pawls - Pressure roller, smooth type - Roller with saws - Smooth pressure roller, 2 pcs Bottom: - Guide strip - Smooth slip roller - Pawls - Track Infeed table: - Roller width: 500 mm - Number of rollers: 3 pcs - Total dimension of infeed table (L/W/H): 580x530x900 mm Outfeed table: - Roller width: 500 mm - Number of rollers: 6 pcs - Total dimension of outfeed table (L/W/H): 1210x535x900 mm - Centralized lubrication - Stepless feed speed adjustment - Main motor: 37 kW - Extraction nozzle diameter: 140 mm - Overall dimension of the multi-blade saw (L/W/H): 2000x1450x2000 mm - Total weight approx. 3000 kg ADVANTAGES – German manufacturing – High cutting height – Infeed and outfeed tables – Used multi-blade saw, in very good condition Net price: 46,900 PLN Net price: 11,160 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (The price may change in case of significant exchange rate fluctuations)