Used Laboratory Furnace for sale (2,169)

Condition: excellent (used), Year of construction: 2021, temperature: 1,000 °C, energy consumption: 10 kWh, Laboratory furnace / Glass tempering furnace Iaedpfx Aoxcb Hnsmyet Max temperature: 1000°C

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Iasdpfx Amofzccnsyot Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ Iajdpfx Asfx Nfmemyet 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: good (used), Internal dimensions 250 x 400 x 160 mm Temperature 1150° Iedpsvhazfjfx Amyeat MARCELS MASCHINEN AG

Condition: new, Year of construction: 2026, Recirculating Chamber Furnace, electric, new unit, delivery time 12 weeks - Temperature: 300°C - Internal dimensions (W x D x H): 1500 x 3000 x 2000 mm - External dimensions (W x D x H): 2410 x 3560 x 2730 mm - Capacity: 9,000 liters - Control: Eurotherm Nanodac, 100 programs with 25 segments each; additional 100 programs can be stored/loaded via FTP or a USB flash drive Iasdslkb Ezepfx Amyot - 2 recirculating air fans - Double doors with safety door sensors - Over-temperature protection: Eurotherm 3216i - Control/recorder unit with color touch display - Robust steel construction, exterior in anthracite - Motorized dampers - Electrical specification: 400 V / 50 Hz / 3NPE - Increased heating power: approx. 70 kW - Entry rails, recess for cart loading - Documentation, CE declaration of conformity - Electrical schematic with spare parts list We are happy to offer transport, installation, and staff training upon request. Also available as a new unit with exhaust fan and other equipment! Delivery time approx. 10–12 weeks. Please contact us! We offer new and used industrial furnaces, which we can also modify and upgrade according to customer requirements. Inspection in our machine hall possible at any time by appointment. Furnace, ovens, drying oven, industrial furnace, drying cabinet, heat oven, heating cabinet, recirculating air oven, chamber furnace, heating up oven, chamber recirculation air oven, annealing oven, tempering oven.

Condition: ready for operation (used), Year of construction: 2001, total width: 1,500 mm, total length: 3,000 mm, Glass tempering furnace 4-19 mm, loading 1.5 x 3 m, without convection, furnace is connected, machine is operational but requires improvements, on-site testing possible. Iasdpfx Asx Dy Sfomyjt

Condition: used, TECHNICAL DETAILS Quenching tank for stirring oil quenching Iaodpfxeug U Thj Amyst - power : 0.25 [kW] - voltage : 3 x 380 [V]

Condition: excellent (used), Binder Type: Binder ED 53 For sale is a high-quality BINDER ED 53 drying oven, Made in Germany. This unit is ideally suited for laboratory, workshop, research, electronics, material testing, or hobby applications that require constant temperatures. Features: - Precise digital temperature display - Robust industrial-grade quality - Even heat distribution - Made in Germany - Ideal for professional applications Capabilities: The BINDER ED 53 is a precision drying oven with natural convection. It is used for: - Drying samples and materials - Heating components - Tempering of workpieces - Curing paints/coatings - Material testing at constant temperatures - Laboratory applications in schools, research, or industry The temperature can be set digitally and is reliably regulated. Thanks to its high-quality insulation and construction, the unit operates consistently and stably. Technical Data: - Model: BINDER ED 53 - Temperature range: up to 300 °C - Rated power: 1.20 kW - Connection: 230 V / 1N~ - Current draw: approx. 5.3 A - Frequency: 50–60 Hz - Protection class: IP20 - Temperature protection: DIN 12880 - Device class: 2.0 - Interior volume: approx. 53 liters - Approx. dimensions: - External: approx. 63 × 63 × 57 cm (W × H × D) - Internal: approx. 40 × 40 × 33 cm - Weight: approx. 40–45 kg Important Note: Iedpfx Ajynh E Ajmyeat "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Subject to changes and errors in the technical data. All data provided without liability!) For further questions, feel free to contact us by phone.

Year of construction: 2023, condition: like new (used), Binder FP 400 Laboratory Oven Year of manufacture: 2023. Like new, unused. 2-year warranty on spare parts Binder FP 400 Material Test Chamber The BINDER FP 400 material test chamber is specifically designed for demanding applications in biological, chemical, medical, and food industry laboratories. It features exceptionally precise temperature control and uniform temperature distribution throughout the entire chamber. This makes the device an ideal foundation for reproducible materials and stability testing, incubation, or developmental processes. Compared to similar test or climate chambers, it sets itself apart with high efficiency, energy savings, and user-friendly operation — greatly simplifying daily laboratory workflows. Technical features and advantages in everyday laboratory use: The advanced FP 400 technology meets the highest standards of safety, energy efficiency, and ease of operation. This material test oven allows precise control of temperature conditions across a wide range of testing and development processes—from microbiological cultivation and chemical reaction studies to stability testing of sensitive samples. Key technical specifications at a glance: - Temperature range: approx. 5 °C above ambient up to max. 300 °C - Internal volume: 400 liters; maximum total load capacity: 90 kg (up to 35 kg per shelf) - Temporal temperature deviation: ±0.3 K; spatial temperature variation: 1 K at 70 °C, 2.5 K at 150 °C, 4.8 K at 300 °C - External dimensions: 1235 x 1025 x 765 mm (W x H x D); internal dimensions: 1000 x 800 x 510 mm (W x H x D) - Power supply: 400 V, 3 N ~, 3.4 kW, 50/60 Hz - Power consumption: 520 W (70 °C), 1200 W (150 °C), 2340 W (300 °C) - Protection class: IP 20 according to EN 60529, certified according to DIN 12880 Additional features: - Interior made of high-quality stainless steel – ensures maximum durability and exceptionally easy cleaning - Digital temperature display and intuitive operation via ergonomic control panel - Practical door lock; quiet operation; low working noise Iasdpoyt A Enefx Amyjt - Environmentally friendly and energy saving due to low energy consumption and advanced insulation design - Flexible interior configuration with optional shelves and drawers (up to 10 shelves can be installed) - Two inner glass doors allow quick visual inspection without affecting temperature levels - Optimized air flow ensures optimal temperature uniformity - Easy to transport and install thanks to its compact design and ergonomic handle The steam chamber has a large capacity of 498 liters, and the advanced air exchange system (16–18 exchanges per hour depending on temperature) ensures rapid stabilization of conditions. The recovery time to set parameters after a brief door opening remains minimal, even at high temperatures—crucial for frequent routine operations. Compliance with globally recognized standards DIN 12880 and EN 60529 (IP 20) guarantees safe and standards-compliant operation for daily use. This device is thus perfectly suited for quality control laboratories, industrial test applications, and academic research projects where the highest precision is required.

Condition: used, Programmable AC power source voltage regulator Laboratory Power Supply, Power Supply, Programmable AC Power Source CHROMA Type 6415 : 64150296 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values- Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. Output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output cut-off relays - EEPROM memory for user-defined voltage and frequency combination for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Over voltage, under voltage, over power, over current, over temperature and short circuit protection - Temperature-controlled fan speed - Self-test when switching on - Supplied as shown, without additional accessories and connection cable Iedpfx Amsdz Srasysat Additional connections: - BNC (EXT VREF) - 9 Pol. D-Sub (RS-232C interface) - 24 Pol. Centronic (GPIB) Space requirement H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition

Condition: used, Programmable AC power source voltage regulator Laboratory power supply, power supply, Programmable AC Power Source CHROMA Type 6415 : 641500000 363 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values - Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FEATURES: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limit - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combination for immediate recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short circuit protection - Temperature controlled fan speed - Self-test when switched on Additional connections: Ijdpfx Amedz Srbjyoat - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (printer) - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Space required H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition 2 pieces available, price per piece

Condition: good (used), Year of construction: 2005, Pusher Furnace System (PUS1), Manufacturer: Ipsen International GmbH, Type: PP-2-65x65x65-18-G, Iajdoyabxyepfx Amyet Serial No.: AN 10.1595-01, Year of manufacture: 2005, Fuel: Gas/Natural Gas/Nitrogen/Methanol, 414 kW, 296 kVA comprising: Two-Chamber Pre-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Preheating Furnace, Type: DL 65x65x65 4-G, 25 A, 9.5 kVA, natural gas heated, 80-100 mbar, 350-500°C Pusher Gas Carburizing Furnace (Double Line), Type: PP-2 65x65x65-18-G, natural gas heated, 86 A, 29.6 kVA, 10 kWh/m³, 80-100 mbar, 860-950°C, 140 pieces per batch, 695 kg/h Oil Quenching Bath (Hardening Oil), Type: QO-65x65x65-E, 161.5 A, 93.1 kVA, electric, air cooling, 6 m³ tank volume, 120°C max., 60-80°C working temperature Two-Chamber Post-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Tempering Furnace, Type: DL-65x65x65-6-E, 126.8 A, 84 kVA, electric, 300°C max. furnace temperature, 150-240°C working temperature Batch Transport System, Measuring, Control, and Switch Cabinet with Conti-Control System, Type: CO/CO2-2 Batch Data: Case hardening for transmission parts 650 mm x 650 mm x 650 mm, max. 280 kg, batch transport height 800/2,200 mm

Year of construction: 2022, condition: like new (used), functionality: fully functional, Siemens Dimension EXL 200 Clinical Chemistry Analyzer For sale: Siemens Dimension EXL 200 clinical chemistry analyzer, purchased brand new and used for only 6–7 months. The device is in excellent technical and cosmetic condition, fully functional, and without any defects. This analyzer is suitable for medical and clinical laboratories seeking reliability, high precision, and fast results in their daily operations. Key Features: Manufacturer: Siemens Model: Dimension EXL 200 Type: Clinical Chemistry Analyzer Iajdpfxoyhfd Ne Amyet Condition: Used – like new (operated 6–7 months) Operation: Fully automated analysis Application: Wide range of clinical chemistry laboratory tests Advantages: - High accuracy and repeatability of results - Suitable for routine and high-throughput laboratories - Reliable technology from a leading global manufacturer - Easy integration into existing laboratory infrastructure Reason for sale: The analyzer was purchased for a laboratory that ceased operations after approximately 6 months. The device is not being used and is therefore offered for sale. Additional information: Upon serious interest, the following can be provided: - additional photos - technical documentation - serial information - assistance with deinstallation, loading, and logistics

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, ATM Model: ATM Brillant 255 ATM Brillant 255 Cut-off Machine 400V Metallography Laboratory 2019 Description: For sale is a professional cut-off machine ATM Brillant 255 – Year of manufacture 04/2019 Industrial unit designed for precise material sectioning in metallography, laboratory, and materials testing applications. The machine comes with a base cabinet and integrated coolant system. Several suitable cut-off wheels are included (see photos). Very robust professional quality Technical Data (as per nameplate): Model: Brillant 255 Year of manufacture: 04/2019 Manufacturer: ATM GmbH Electrical Data: Voltage: 400 V (three-phase) Frequency: 50 Hz Power: 12.5 kVA Fuse protection: 32 A Mechanical Data: Cut-off wheel: Ø 400 mm Max. wheel speed: approx. 3050 rpm Wheel bore: 32 mm The machine is mounted on a base cabinet with coolant tank Dimensions: Width: approx. 120 cm Depth: approx. 80 cm Iaedsymbzujpfx Amyjt Height: approx. 150 cm Weight: approx. 450 kg Condition: Used Scope of delivery: (See photo) (Specifications and technical data subject to change and errors!) For further questions, please feel free to contact us by phone.

Condition: like new (used), temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW Iedpfxjyxnk Uj Amysat heating: 5-sides heated control zones: 1 process control controller: yes weight: 700 kg voltage: 400 V 3/N current consumption: 63 A PLC: Siemens S7 control cabinet: brand new - With an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - Controllable cooling housing with autom. valve - Automatic exhaust damper - Automatic exhaust flap - Monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor.

Condition: used, Gas heated double chamber furnace type: KA_GB 10.14.14/d heating: natural gas usable dimensions per chamber width: 1.000 mm height: 1.400 mm depth: 1.400 mm max. temperature: 550°C working temperature: 250 – 550°C uniformity: ±5 K total connected load: 15 kVA hot gas circulator power: 2 x 5,5 kW (1470 min-1) combustion air blower power: 1 x 1.5 kW (5520 rpm at 95 Hz) burner output: 2 x 100 kW (expandable to max. 2 x 150 kW) number of control groups: 2 Iedpfxjdyvipj Amyeat

Condition: good (used), debinding and sintering chamber furnace, make Nabertherm type: LH 280/13 DBS temp. max.: 1300°C Isdjmfn Ruopfx Amyjat internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 weight: 700 kg voltage: 400 V 3/N current consumption: 63 A PLC: Siemens S7 control cabinet: brand new - with an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - controllable cooling housing with autom. ball valve - automatic exhaust damper - automatic exhaust flap - monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor. -The furnaces themselves, particularly the brickwork, heating elements, and insulation, are in excellent condition with low or no working hours, making them practically like new.

Condition: used, functionality: fully functional, power: 60 kW (81.58 HP), fuel type: electric, operation weight: 500 kg, maximum load weight: 500 kg, Year of construction: 2020, operating hours: 400 h, machine/vehicle number: 2020-2704-0001, Vacuum-Controlled Plasma Nitriding Furnace Iodpfxexz Divj Amyoat

Condition: not inspected (used), Padeltherm shaft furnace Must be dismantled and collected by the buyer. Iasdpfxeywt I Ns Amyot

Condition: ready for operation (used), Door glass present Interior dimensions: Width: 340 mm Height: 355 mm Depth: 360 mm Rated temperature: 500° C Iajdpfx Asyk Et Njmyjt

Condition: as good as new (ex-display), vacuum drying oven Inside: 700 x 700 x 600mm deep Heating capacity: 3 KW Iedpfx Amjfbl T Noyjat Temperature range 1-120°C Outer dimensions: 1280 x 950 x 1280 Pressure range: Atmosphere - 0 Bar (Not suitable for overpressure) A suitable vacuum pump is provided depending on the application. Supply line: 3ph , N, PE 400V, 50Hz CEE plug The interior installation can of course be completely removed!

Condition: used, Rotary vane vacuum pump Manufacturer: Leybold Type: Trivac D25 BCS Cat. no.: 11879 Suction power: 25m³/h Ultimate pressure: approx. 0.005mbar Motor: 400V Ds Iajdebqnhgopfx Amyet Please send us your pump request as an inquiry.

Year of construction: 2012, condition: used, Technical details: max. temperature: 700° - übliche Temperatur: 400 - 650°C Grad size of opening: B: ca. 2200 x T: ca. 3800 x H: ca.1100 mm program control: Siemens S7/300 IM 151-7 interface: Ethernet container volume: Ofen-Volumen: 9,2 m³ l control voltage: 24 / 230 Volt current type: 1P/PEN; 50 Hz Voltage: 400 V elect. connected power requirement of heater: 3 x 3 x 21 kW = 189 kW flow rate: 3 x ca. 9.000 = 27.000 m³/h weight of the machine ca.: 8,0 t dimensions of the machine approx. HxWxD: ca. 3.9 x 3.8x 4.8 m dimensions electric cabinet: ca. B: 2.400 x T: 400 x H: 2.000 mm transport dimensions LxWxH: ca. 5,2 x 3,6 x 2,9 m Electrically heated circulation oven Electric annealing furnace whose housing is made of profiled sheet steel and lined with lightweight refractory bricks/ firebricks. Application/processes: mainly annealing of low-alloy and high-alloy wood cylinders (e.g. alloyed gray cast iron) Usual operating weight 5000kg max. 8000kg The parts are placed directly crosswise on the bogie hearth/grate in the flow device. (Height above floor approx. 750mm without grate) Heating integrated in oven ceiling Circulation fan (3 compact fans) on oven side wall, 3 x 4.0 kW = 12.0 kW Forced cooling (1 cooling air fan) Iaedpfx Aeu R Dhxomyst Program control via 25 programs with 50 program sections per program Oven door/lifting door with SWE gear motor approx. 2.2 kW (frequency-controlled) Bogie hearth drive approx. 3.0 kW SEW geared motor (frequency-controlled) incl. center rail (chain drag) used, good condition *

Condition: ready for operation (used), A Rohde chamber kiln is available. Volume: 600l, max. temperature: 1000°C, internal dimensions X/Y/Z: 710mm/870mm/920mm, power: 40kW, insulation layers: 2, heating directions: 4, heating element: grooved refractory brick. Machine dimensions X/Y/Z: approx. 1100mm/1500mm/2300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible. Iaodpfxeyvix Ie Amyjt

Year of construction: 1996, condition: used, functionality: fully functional, load capacity: 650 kg, IPSEN DAQ 7-8 Manufacturing Year : 1996 Heating : Gas Heaters : Recon 2 (x3) Charge Capacity : 650kg Brutto Charge dimensions : W:650mm L:1173mm H:550mm Protective Gasses : Endogas Ammonia Nitrogen Iedpjxivumjfx Amyeat The furnace can be operated with existing conditions.