Used Sintering Furnace for sale (765)

Condition: good (used), debinding and sintering chamber furnace, make Nabertherm type: LH 280/13 DBS temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 weight: 700 kg voltage: 400 V 3/N current consumption: 63 A Bodpfx Aemfn Ruog Nocw - with an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - controllable cooling housing with autom. ball valve - automatic exhaust damper - automatic exhaust flap - monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor. -The furnaces themselves, particularly the brickwork, heating elements, and insulation, are in excellent condition with low or no working hours, making them practically like new. -To operate these furnaces, it will be necessary to implement at least one temperature controller per furnace, a PLC, or a similar control system.

Year of construction: 2020, condition: like new (used), functionality: fully functional, Fully automatic sintering continuous furnace system Manufacturer: Sarnes Model: 600-G/CQI-9 Year of manufacture: 2020 (commissioned 2021) Programmable, with online diagnostic system. Fuel: natural gas Hydrogen + nitrogen (N2+H2) operation integrated Bcedpfx Asxfcdyjg Nsw The system has seen very little use and is in excellent condition. Offer / Quotation Date: 18.1.19 620 mm belt width, gas heated, N2/H2 operation, LED dewaxing zone, rapid cooling section (Pos 2), flameless discharge and ceramic muffle, Heating: low NOx RS Rekudrall burners, SiSiC burner tubes, installed heating capacity 320 kW in 8 zones, dual thermocouples, 100 mm usable height. LED 3 dewaxing zones ("low energy dewaxing" – utilization of chemically bound energy of the waxes and improved burnout conditions especially for heavy PM parts (>0.9 kg)). Dimensions: - Infeed table 2 m (target-actual belt speed compensation) - LED3 dewaxing zone: 1.5 m - Sintering zone length 7.5 m - Rapid cooling length 1 m - Convective cooling zone length 2 x 4 m - Flameless discharge with air shower 2 m - Outfeed table 2.7 m - Total system length 23.7 m - Width 2.3 m Connection ratings: Heating: installed power 320 kW Natural gas: 25 m³/h (80 mbar) N2: 45-65 m³/h (max. 80 mbar) H2: 0.5 - 15 m³/h (80 mbar) Cooling water: 3-5 m³/h (non-pressurized; temp.

Condition: as good as new (ex-display), Year of construction: 2023, type of input current: AC, El. heated roller sintering furnace, make Riedhammer type: TR 18/4x33/10-E 90 condition: as new length of debinding zone: 6.12 m length of heating/holding zone: 6.12 m length of the cooling zone: 6.12 m total length of oven without conveyors: approx. 18.4 m total length of oven with conveyors: 20.4 m total width of oven: 3.5 m total height of oven: approx. 2.5 m clear oven width: 1,540 mm usable width: 4x 330 mm usable height from top edge of roll: 100 mm roller spacing: approx. 85 mm roll diameter: approx. 50 mm number of oven conveyor drives (controlled): 3 pieces number of rule groups: 34 connected load of oven: approx. 476 kW Bcedpfx Ajp T Th Hsg Now maximum temperature on the thermocouple: 900 °C max. temperature: 930°C power type: 400/230V, 50Hz cooling water consumption: approx. 50 m³/h

Year of construction: 2023, condition: new, El. heated two-track plate pusher furnace, make Riedhammer type: TP12,75/2x20/15-E-145 condition: as new total length of oven: 15.5 m furnace width: 3.6 m voltage type: 400/230V, 50 Hz connected load: 17 kVA tolerated voltage fluctuation: 10% tolerated frequency fluctuation: 1% PLC: SIEMENS/Comfort Panel Bsdpfep T T Hnjx Ag Nscw TP1500-15 product structure (L x W x H) including push plate: 200 x 200x 101 mm Tmax debinding zone (4 segments): 650 °C Tmax pressure compensation zone (1 segment): 750 °C Tmax main combustion zone (6 segments): 1450 °C Tmax cooling module 1: 600 °C Tmax cooling module 2: 300 °C min. push time: 8 min max push time: 30 min number of conveyor plates: 266 pieces channel height: 105 mm

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. Bcsdpfx Aoq Nyzbjg New The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Condition: like new (used), Chanber size: 280x180x500mm upper Bodpfxsd Sm Dio Ag Necw 280x130x450mm lower Max temperature: 700 C °

Condition: good (used), Internal dimensions 250 x 400 x 160 mm Bcodjvhazfopfx Ag Nsw Temperature 1150° MARCELS MASCHINEN AG

Condition: excellent (used), Year of construction: 2021, temperature: 1,000 °C, energy consumption: 10 kWh, Laboratory furnace / Glass tempering furnace Bcedpjxcb Hnsfx Ag Njw Max temperature: 1000°C

Condition: ready for operation (used), Extruder + electric cabinet output: 200 kg Heads not included Winder not included Bedox Dd Hmopfx Ag Nocw

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 3945, Retort Type Mesh Belt Furnace Typ: BLH with protective gas atmosphere Heat treatment line with protective atmosphere KOHNLE BLH-950-250/50-1800 Year of production: 2003 Serial number 3945 Hardening in a protective atmosphere, cooling in oil, washing and degreasing and tempering Bjdpfxoyn Rgve Ag Nocw It consists of - Vibrator for charging - 300 kg capacity - Magnetic conveyor for filling the furnace - Tempering furnace - max working temperature 950 C 3 temperature control zones strip width 250 mm Capacity 30-50 kg/h Tunnel length 1800 mm Protective atmosphere Propane (possible change of gas for a protective atmosphere) - Oil quench with cooling oil, temperature 70C - Magnetic conveyor for extracting goods - Stand for washing and degreasing - vibrator for charging Annealing furnace - max temperature 500 C Control cabinet SIEMENS ALL ORIGINAL TECHNICAL DOCUMENTATION FROM THE MACHINE Installation dimensions 17 m x 2 m x 2.5 m Dismantling and loading costs are charged additionally The price of the mentioned line is not fixed for serious enquiries

Year of construction: 2012, condition: excellent (used), functionality: fully functional, machine/vehicle number: 9349-0010, Used: rotary hearth furnace / mandrel hardening press Manufacturer: Aichelin Model: Drehherdofen Aichelin RDGs 270 Control: Siemens S7-300/317-2 PN/DP Year of manufacture: 2012 Max. temperature: 950 °C GAS Bcodpfow Rrxfex Ag Nsw

Condition: used, Laser Sintering System Vanguard si2 SLS System, upgraded in 2017 to modern standards Machine Dimensions: Width: approx. 157 cm Depth: approx. 119 cm Height: approx. 198 cm Minimum installation space: 4.57 m × 3.66 m × 3.05 m Door height: 2.13 – 2.44 m Floor: Level (max. 25 mm deviation) 50 psf load capacity Non-vibrating Untiled / no carpet Approx. 1,150 kg Process station: 240 VAC ±5 % 3-phase 12.5 kVA Dedicated circuit 4-wire cable Ceiling connection For different voltages: Transformer required: 208→240 V 400→240 V 480→240 V Upgrade Details: UniHeat V5 / 10-zone build chamber heating Layer thickness adjustable via software, all listed materials are parameterized at 0.10mm 70-watt CO2 laser Fully digital, 3-axis high-speed scanning system with "XStream BDS" scanner control system with scan speeds of 6–12 m/s Build rate at medium packing density: 10–15 mm/h 2 x 20kg powder reservoirs integrated in the machine Including unpacking container and manual unpacking station (see pictures in the attachment) Including machine and software documentation in digital form Last maintenance August 2024 (Laser window + ATC sensor new in 2024) Including 2 x nitrogen generators and 1 x cooler included Operating hours: unknown / average use 2x per week The following materials are qualified for a 0.10mm layer thickness: - PA12 - PA2200 / EOS - TPU - natural / Stratasys - PP - natural / Lehmann & Voss - PA12 - PA2210FR / EOS - PA11 - black / AM Polymers Bcedpfx Aeyl Tv Isg New (Support is secured despite the closure of LSS, as the service technicians have been taken over by a Belgian company) Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and error!) For further questions, please feel free to contact us by phone.

Year of construction: 2009, condition: excellent (used), functionality: fully functional, Equipment: CE marking, type plate available, Induction furnace for heating steel with dimensions up to 550mm in length, 100mm in width, and 20mm in thickness. The furnace is connected to a feeder for small rods with dimensions from 10x10 to 22x22 and a length of up to 300 mm. The hopper feeder sorts the parts and automatically loads the inductor with consecutive pieces for heating. The feeder is ideal for producing large nails, screws, etc. Its operation can be seen in a YouTube video. The efficiency is very high. For small elements, heated parts at 1100 degrees are retrieved every 6 seconds. We have two inductors for the furnace to heat materials with thicknesses up to 20mm and up to 16mm. It is possible to modify the furnace to suit your needs. Replacing the inductor with other sizes costs approximately 3000 EUR. The machine is very versatile in terms of the sizes of heated products. Bsdpfjw Hqldsx Ag Nocw It is possible to heat flat bars, round rods, or square rods.

Condition: ready for operation (used), Door glass present Interior dimensions: Width: 340 mm Height: 355 mm Depth: 360 mm Rated temperature: 500° C Bcodpoyk Et Nsfx Ag New

Condition: good (used), Year of construction: 2014, Overall dimensions: 12.4 x 18.8 m incl. safety fencing Number of baskets per oven: 2x 1,170 x 1,150 x 2,000 mm Reference load weight (net/gross): 1,285 / 2,185 kg Max. load weight (net/gross): 2,000 / 2,700 kg Load: 2,050 x 1,150 x 2,800 mm, external dimensions: 2,950 x 6,400 x 7,800 mm Max. temperature: 600 °C Operating temperature: 510 °C Total heating capacity: 2 x 81 kW = 162 kW electric Bsdpoyiaf Iofx Ag Njcw Quenching water bath: Type = QT-24.16.57/71E Temperature bath max.: 70°C, chamfering volume = 20 m^3 2 ageing furnaces: Type = ADBF-24.16.30/250E External dimensions: 2,800 x 4,850 x 4,000 mm Oven temperature max.: 250°C Operating temperature: 180 °C Total output: 2x 40.5 kW = 81 kW Electrical storage/retrieval section, Gea cooling coil, protective housing, safety equipment, system control 1,056 annealing baskets with stanchion pallets System already dismantled, packed and stored

Year of construction: 2012, condition: used, functionality: fully functional, 12 months warranty, in stock - Unit on base frame - Maximum temperature: 1300 °C - Furnace chamber volume: 120 litres - Chamber dimensions: 500 x 500 x 500 mm (W x D x H) - Separate control cabinet Bcjdpoyn Emqsfx Ag Nsw - Nabertherm controller - Parallel swing door for opening while hot - Slot in the lower right of the furnace collar (for retrofitting CO2 and N2 gas supply in a gas box, not included!) - Optional new gas box available (on request) - Power: 15 kW - Connection: 400V 3/N/PE 50 Hz - Net weight: 410 kg - Documentation, CE declaration Furnace, furnaces, industrial furnace, annealing furnace, heat treatment furnace, chamber furnace,

Condition: good (used), Year of construction: 2002, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Bodpewg Hlaefx Ag Nocw Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: excellent (used), functionality: fully functional, Chamber convection furnace with hot gas circulation for tempering, annealing, preheating, etc. Bcedpfsx Eiu Ssx Ag New Type: N 250/85 A Effective chamber dimensions (W × D × H): approx. 650 × 750 × 650 mm Maximum temperature: 850 °C Heating capacity: 20 kW Rated current: 29.0 A Power supply: 3 × 400 V AC, 3N / PE via CEE 32 A plug (alternatively hardwired connection possible)

Condition: good (used), Make: ELIOG Year of manufacture: 1992 Opening (W x H x D): 150 x 110 x 350 mm Temperature: up to 1,350 °C Nominal power: 4 kW Connection load: 5 kW Bodpfxjym U Sgo Ag Nocw Accessories/Equipment: separate control cabinet Condition: good Total weight: 170 kg Furnace dimensions: 500 x 600 x 430 mm Control cabinet dimensions: 450 x 550 x 700 mm

Condition: ready for operation (used), Heraeus MR 170 E muffle furnace / annealing furnace / oven Maximum temperature: 1000°C Bsdpfx Asynhm Heg Necw Internal dimensions: 295mm x 175mm x 95mm (D x W x H) You are welcome to arrange a viewing appointment. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided you present a valid VAT identification number. Subject to prior sale. Visit our shop to see more of our offers. Company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data deviations and errors in the article description may occur and are subject to change.

Year of construction: 2012, condition: used, Technical details: max. temperature: 700° - übliche Temperatur: 400 - 650°C Grad size of opening: B: ca. 2200 x T: ca. 3800 x H: ca.1100 mm program control: Siemens S7/300 IM 151-7 Bcsdpfju R Dhxex Ag New interface: Ethernet container volume: Ofen-Volumen: 9,2 m³ l control voltage: 24 / 230 Volt current type: 1P/PEN; 50 Hz Voltage: 400 V elect. connected power requirement of heater: 3 x 3 x 21 kW = 189 kW flow rate: 3 x ca. 9.000 = 27.000 m³/h weight of the machine ca.: 8,0 t dimensions of the machine approx. HxWxD: ca. 3.9 x 3.8x 4.8 m dimensions electric cabinet: ca. B: 2.400 x T: 400 x H: 2.000 mm transport dimensions LxWxH: ca. 5,2 x 3,6 x 2,9 m Electrically heated circulation oven Electric annealing furnace whose housing is made of profiled sheet steel and lined with lightweight refractory bricks/ firebricks. Application/processes: mainly annealing of low-alloy and high-alloy wood cylinders (e.g. alloyed gray cast iron) Usual operating weight 5000kg max. 8000kg The parts are placed directly crosswise on the bogie hearth/grate in the flow device. (Height above floor approx. 750mm without grate) Heating integrated in oven ceiling Circulation fan (3 compact fans) on oven side wall, 3 x 4.0 kW = 12.0 kW Forced cooling (1 cooling air fan) Program control via 25 programs with 50 program sections per program Oven door/lifting door with SWE gear motor approx. 2.2 kW (frequency-controlled) Bogie hearth drive approx. 3.0 kW SEW geared motor (frequency-controlled) incl. center rail (chain drag) used, good condition *

Condition: new, Year of construction: 2026, Recirculating Air Chamber Furnace, electric, new unit, delivery time 12 weeks - Temperature: 300°C - Internal dimensions (W x D x H): 1500 x 3000 x 2000 mm - External dimensions (W x D x H): 2410 x 3560 x 2730 mm - Capacity: 9,000 liters - Control: Eurotherm Nanodac, 100 programs, each with 25 segments; an additional 100 programs can be saved/loaded via FTP or USB memory stick - 2 recirculation fans - Double doors with safety door sensors - Overtemperature protection: Eurotherm 3216i - Control/Recorder with color touch display - Sturdy steel construction, exterior in anthracite - Motorized dampers - Electrical specification: 400 V / 50 Hz / 3NPE - Increased heating capacity approx. 70 kW - Recessed entry for loading trolleys - Documentation, CE Declaration of Conformity - Electrical wiring diagram with spare parts list Transport, installation, and staff training are available upon request. As a new unit, this furnace is also available with exhaust fan and alternative equipment! Delivery time approx. 10–12 weeks—please contact us for details! We offer new and used industrial furnaces, which we can also modify or upgrade to customer specifications. Inspection at our facility is possible at any time by appointment. Bodpslkb Ezofx Ag Njcw Furnace, ovens, drying oven, industrial oven, drying cabinet, heating oven, heating cabinet, recirculation oven, chamber oven, heating chamber, recirculation chamber oven, tempering oven, annealing oven

Year of construction: 1997, condition: used, functionality: fully functional, machine/vehicle number: 16109, Electrotherm HL-36x50-EQ-2 Vacuum Furnace Chamber (1997) Stokes Vacuum Pump System Digital Display Controller Slide Rail Track Part Entry Cart 1300 Max Temp Bcjdpfxox Ap N Rj Ag Nsw Sublocation - Heat Treatment area.

Condition: excellent (used), Year of construction: 2015, Glass tempering furnace GLASTON RC200-2136-380-L Year of production: 2015 With top convection Maximum glass size: 2100 x 3600 mm Minimum glass size: 100 x 250 mm Glass thickness: 4 - 19 mm Bedpfx Ageyip Hde Necw Total power: 807 kW IR scanner Rytek, cullet conveyor Excellent condition Available immediately

Condition: like new (used), Year of construction: 2019, Flat glass tempering furnace GLASTON FC Series 2448-380-R Year of production: 2019 (installed 2020) With full convection Maximum glass size: 2400 x 4800 mm Glass thickness: 4 - 19 mm Bcsdpfx Agoyip Dis Njw Total power: 1551 kW iLook scanner included Very good and clean condition Excellent condition, very little used As new Available immediately