Used Laminate Trimmer for sale (1,156)

Condition: used, functionality: fully functional, Type: Automatic sheet-to-sheet laminating machine Lodpfx Ajxnzmfjbcehd Manufacturer: Lamina system AB, Sweden Model: Laminating 1420 FA Technical Specifications Max. sheet size: Width 1420 mm Min. sheet size: Width 200 mm /Length 350 mm Top sheet: 130 - 450 gm/m2, 1 pts = 28.25 g/m2 Bottom sheet: from 250 gm/m2 Thickness: 0.6 - 10mm (0,016 - 0,39*) Glue: PVA type or as specified Feeder height: Top: 500 mm Bottom: 800 mm Registration accuracy:* < +/- 0.50 mm Operating speed:* Up to 3000 sheets/hour Total installed power: 4.0 kW Electrics: 400 V, 3-Phase, neutral, 50/60 Air requirements: 6 bar; 0.6 MPa or 80 psi Approximately 500 lpm* Oil- and water free air

Condition: used, Year of construction: 2013, functionality: fully functional, Type: Automatic sheet-to-sheet laminating machine Manufacturer: Lamina system AB, Sweden Model: Laminating 1110 FA Year: 2013 Technical Specifications Max. sheet size: Width: 1100 mm Min. sheet size: Width: 200 mm /Length: 350 mm Top sheet: 130 - 450 gm/m2, 1 pts = 28.25 g/m2 Bottom sheet: from 250 gm/m2 Thickness: 0.6 - 10mm (0,016 - 0,39*) Glue: PVA type or as specified Feeder height: Top: 500 mm Bottom: 800 mm Lhedpfoxnzm Eox Abcsd Registration accuracy:* < +/- 0.50 mm Operating speed:* Up to 3000 sheets/hour Total installed power: 4.0 kW Electrics: 400 V, 3-Phase, neutral, 50/60 Air requirements: 6 bar; 0.6 MPa or 80 psi Approximately 500 lpm* Oil- and water free air

Condition: used, Year of construction: 2010, functionality: fully functional, Horizon Three-Knife Trimmer for sale! Machine in production in very good condition. Could be tested. Available immediately! Model: HT-101 Manufactured: 2010 Serial: 326003 Description Ledpfx Aeway N Sjbcjhd Trimming blower TB -100 Feed guide HCG - 100 * Fully automated three-knife trimmer; * Can be used in-line or off-line; * Automated setup for different book sizes and precision cutting accuracy; * Job changeovers are performed simply and quickly through the color LCD touch-screen. There are very few replacement parts when changing over the HT-101; * Knife height and cutting depth are easily adjusted through the color LCD touch-screen. TECHNICAL SPECIFICATION: * Max. untrimmed book size: 410 x 320 mm * Min. untrimmed book size: 148 x 105 mm * Max. trimmed book size: 366 x 300 mm * Min. trimmed book size: 145 x 103 mm * Trimming width: fore-edge: 45 mm / top-bottom: 30 mm * Trim thickness: max. 100 mm / min. 5 mm (min. book thickness is 2 mm) * Production speed: 400 to 1600 cycles / hr

Year of construction: 1987, condition: used, Max. Sheet Size X : 760 mm Max. Sheet Size Y : 1020 mm Min. Sheet Size X : 320 mm Lhsdjikq Hhopfx Abcjd Min. Sheet Size Y : 460 mm Production Capacity Max : 35 m/min Technical data can vary according to job, consumables and possible other factors

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Automatic Sheet Feeder A-20 (A-3): Mabeg Suction Head, Double Sheet Control Lodpforp D I Ijx Abcehd Laminating Unit EK 104 (A-EK-3): Waterbased & Thermal Automatic Sheet Seperator TM-104 (TM-3) Seperating Unit: Quadruple Round Knife, Perforating Device Powder Spray Removal Device Automatic Stacker S-3 Max. Sheet Size X : 1040 mm Max. Sheet Size Y : 1140 mm Min. Sheet Size X : 210 mm Min. Sheet Size Y : 210 mm Production Capacity Max : 50 m/min

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Automatic Sheet Feeder A-4: Mabeg Suction Head, Double Sheet Control Laminating Unit EK-HL-4: Waterbased & Thermal Automatic Sheet Seperator UTM-4 Lhedpfjrp D Nlsx Abcjd Seperating Unit: Quadruple Round Knife, Perforating Device, Hot Knife Powder Spray Removal Device GK-4 Automatic Stacker S-3 Airjet-Dryer Max. Sheet Size X : 1040 mm Max. Sheet Size Y : 1420 mm Min. Sheet Size X : 210 mm Min. Sheet Size Y : 210 mm Production Capacity Max : 70-100 m/min

Condition: good (used), Year of construction: 2000, Automatic Sheet Feeder Automatic Laminating Unit EK 130/180 Automatic BAT Sheet Seperator Lhjdpfjh H Dqhsx Abcod Automatic Stacker Max. Size : 1300 x 1800 mm Production Capacity Max : 50 m/min Technical data can vary according to job, consumables and possible other factors

Condition: like new (used), Through feed double end trimmer saws. 2x 3kW saw motors. Feed motor with variator. 300mm to 3100mm end trimming capacity. Suitable for use with a moulder infeed or similar. Lodpfx Absif N Sxscshd

Condition: excellent (used), Brand new / Showroom machine Automatic roll-fed encapsulation laminator with auto-feed, lamination, and cutting in one process Technical Specifications: Max. Laminating Width: 11" (279 mm) Laminating Speed: 39 inches per minute (approx. 99 cm/min) Maximum Output: Up to 240 sheets per hour Film Thickness Range: 1.5 to 5 mil Feeder Capacity: Up to 200 sheets Power Requirements: 110 V Controller: Digital panel Dimensions (W × L × H): 24" × 19" × 18" (approx. 610 × 483 × 457 mm) Cooling System: Included Lhsdpfxewrpd Ne Abcsd Stand: Optional Sleep Mode: Activates after 10 minutes Key Features: Compact design fits office or school environments One-button start; stops automatically when job is complete Up to 3x faster than pouch laminators Easy top access for quick cassette changes Integrated internal rotary cutter for safety Digital panel for setting margins and sheet count Film cassette lifts out for easy replacement Ideal for schools, offices, and print shops

Condition: good (used), Working width / roller width 120cm / 130cm Width depth height 170 / 68 / 125cm Inlet table height 92cm Lodpferhlcuox Abcshd Weight (including base frame) 168kg Throughput height max. 25mm Roller diameter ca. 112mm speed 0 - 3.6m/min El. Connection 230V / 0,9 KW Height adjustment Finger protection Footswitch Unwinding and rewinding axis Roll-off axis for under-lamination Quick release cones Forward and reverse running Speed ​​adjustable

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, cutting height (max.): 50 mm, product length (max.): 330 mm, product width (max.): 330 mm, production capacity: 1,000 unit/h, No reserve price – guaranteed sale to the highest bidder! Three-knife trimmer for high productivity: up to 1,000 cutting cycles per hour! TECHNICAL DETAILS Cutting thickness: 2 – 50 mm Number of knives: 3 Untrimmed format: Maximum: 330 x 330 mm; Minimum: 148 x 105 mm Trimmed format: Maximum: 300 x 300 mm; Minimum: 142 x 100 mm MACHINE DETAILS Lhjdpexlzuqefx Abced Dimensions (L x W x H): 2,260 x 1,160 x 1,600 mm Weight: approx. 1,530 kg FEATURES User-friendly LCD display Flexible processing of various product sizes Fast changeover times of less than 10 minutes Advanced locking system for operator safety

Condition: good (used), Year of construction: 2002, Rondo Laminating and Shaping Line for Yeast Pastries - Smartline and Compactline model - used - year of manufacture: 2002 - length: 15 meters - without tools - components: satellite calibrator, dough rolling cylinder, standard calibrator, work table, cutting station, guillotine, discharge table - machine in production - collection from warehouse / shipping option - price on request Lsdpfx Aow Nx S Nebcohd

Condition: like new (used), Year of construction: 2016, operating hours: 210 h, functionality: fully functional, working width: 1,800 mm, type of cooling: water, This Reliant Powerbond HPC, 1800 mm width High Pressure Laminatint Line contain the following unites: - Unit 1 Reliant Powerline non driven unwind unit - Unit 1A Lightweight table designed to support sheets during feeding Ledpfxjv Tmxns Abcshd - Unit 2 Reliant Powerline Powder Coating unit - Unit 3 Reliant Powerline 3000 mm PTFE Conveyor - Unit 4 Reliant Infrared Pre-Heating System - Unit 4A Unwind shaft roll support for surface friction or centre unwinding - Unit 5 Reliant Powerbond-HPC-180 Haevy Duty, High Pressure Laminating Machine - Unit 5A Laminating Line Control Unit - Unit 6 Reliant Powerline Centre Driven Rewind System - Unit 7 Reliant Chiller Unit-I416 More details about the units can be found in the attached pdf file. Loading of the machine on the transport vehicle is included in the price. The transportation of the machine should be provided by the buyer.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 34205, total width: 4,100 mm, total length: 12,195 mm, cutting length (max.): 3,700 mm, We are selling our fully functional Hegla ProLam 37. Special features: Traveren – rotation device Support arms = 4 units for Low E glass, reinforced version Ljdpoxqc U Aefx Abcjhd Technical specifications: Film thickness: 0.38 mm to 3.8 mm Maximum cutting height: 2 x 3 mm to 2 x 8 mm Maximum glass size: up to 3,750 mm Year of manufacture: ProLam 37 (2011) Brand: HEGLA The machine is still in operation and can be inspected on site at any time. Additionally, we have an EcoLam 60 available for sale, which we would include for an additional €10,000.

Year of construction: 1990, condition: good (used), strip width: 900 – 2.050 mm strip thickness: 1 – 6 mm edge strip width: 5 – 50 mm material (strength): 1.000 N/mm² Lhjdpfxogrug Ao Abced

Year of construction: 1990, condition: good (used), strip width: 900 – 2.050 mm strip thickness: 1 – 6 mm edge strip width: 5 – 50 mm Lhjdebicbzspfx Abced material (strength): 1.000 N/mm²

Condition: excellent (used), Year of construction: 2022, For sale: edge gluing press. The press is 100% hydraulic: side and top hydraulic pressure. Condition: almost unused Working dimensions: 150/1200/6630 mm (width, height, length) Lodpowybmfjfx Abcjhd

Condition: excellent (used), Year of construction: 2011, Year: 2011 Maximum sheet size: 530 × 740 mm Laminating speed: up to 25 m/min Lodpfjxtxd Sex Abcehd Automatic suction feeder Pneumatic roller pressure Automatic film cutting Compatible with gloss, matt, and soft touch films Short changeover time – ideal for short runs

Condition: used, functionality: fully functional, type of input current: AC, total height: 870 mm, total length: 2,190 mm, input voltage: 230 V, Stapling machine with front trim Foldnak 8 Paper format: min 12x21cm; max: 32.5x45cm (trimmer: closed A6-A4) Lhjdewpqvnspfx Abcjd 2x Foldnak industrial stapling heads Trimmer with compression rollers. Band delivery. Speed: max 2000 staplings/hour Dimensions: height x width x length (cm): 87 x 61 x (58+96+65)=219. Total net weight 270kg: In operation, can be tested.

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Lhjdsvy Aipjpfx Abcsd Machine dimensions 10130×2130×2960 mm

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 2003-2928/29, input voltage: 400 V, type of input current: three-phase, Pannkoke laminated glass cutting table with a maximum glass cutting width of 3.24 m and a maximum thickness of 12 mm laminated glass. Includes EUROMEC semi-automatic float cutting table (year 2003) as a loading table. Both machines are in very good condition. Lsdpjx I Rb Iefx Abcjhd

Condition: ready for operation (used), functionality: fully functional, Rotary die cutter in very good condition, hardly used. Ledpfx Ajxz Tn Uebcjhd Contact details of a highly reputable die manufacturer can also be provided.

Condition: used, Year of construction: 2009, Three knife trimmer Müller Martini Orbit (3675) Year: 2009 For three side trimming of book blocks and brochures, operable in connection with soft- and hardcover book production lines. Description: - Colour monitor with touchscreen - Infeed conveyor - Right hand infeed - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 Maximum size (uncutted): 384 x 320 mm Minimum size (uncutted): 140 x 72 mm Maximum size (cutted): 304 x 303 mm Minimum size (cutted): 136 x 70 mm Lsdpfx Abswuthwjcehd Book thickness: 2 - 80 mm Max. mechanical speed: 1.000 to 7.000 cycles/hr Condition: This machine is offered fully cleaned and checked in good running condition Note!: Technical specifications are subject to typing errors, as well as format or design modifications in comparable models from the manufacturer.

Condition: used, Year of construction: 2017, functionality: fully functional, Machine type: Laminating and coating Processes: Suitable for WET and DRY lamination Cutting system: Blade cutting system for polyester Feeder: Mabeg feeder Lsdpfxjx N Ucxo Abcshd Minimum sheet size: 32 × 29 cm Maximum sheet size: 106 × 142 cm Maximum mechanical speed: 70 m/min Maximum production speed: 65 m/min

Year of construction: 2015, condition: excellent (used), Direct gravure type A process of coating film or Aluminium with a coating agent or laminating it with another substrate. Line water.solvent based coater plus inline solvent based laminator Product width: Max 1,700mm Materials: 9~50um (PET), 10-60um(CPP), 10~70m (OPP), 20~ 100um (Aluminium) Speed: 300mpm (commercial 50-250 mpm) Lhsdpfswp Sausx Abcod Volume:
 max 900mm Unwinding tension: 100-1,000N 
 Unwinding diametr: max 1,000mm (3in, 6in) Winding tension: 100-1000N Drying
temperature: Max 230°C (4m x 6 Zones)