Used Lamination for sale (759)

Year of construction: 2017, condition: refurbished (used), Lamination oven 4 tables, max glass size 3600*1800mm Isdpfx Aceilldfs Asik

Condition: good (used), Selling CRATHERN, PERONDI IA630, NA 900. Iisdpfx Acoud Axgo Aok

Condition: excellent (used), Year of construction: 2004, BOVONE (2004) Lamination Line Iiedowxxk Espfx Ac Ask Comprising: Tilting table, washing unit, positioning table, portal table, film roll storage, folding table, transport table, pre-lamination oven with pressing unit, transport table, and take-off tilting table. Glass thickness: 3–12 mm Maximum assembled panel thickness: 60 mm Minimum panel size with automatic loading and unloading (standard cycle): 400 x 700 mm Minimum panel size without automatic loading and unloading (small parts cycle): 550 x 300 mm Maximum panel size: 2200 x 4500 mm Approximate average assembly time per panel (glass/PVB/glass): 70–100 seconds Worktop height: 950 mm +/- 20 mm Compressed air consumption: minimum 6 bar, 400 l/h Demineralized water consumption (with water recycling system): 0.7 m³/8h Three-phase supply voltage: 400 V +10% Supply frequency: 50 Hz +2% Auxiliary voltage for cabinet lighting: 240 V single-phase Installed electrical power: 265 kW Estimated average electrical power consumption: 215 kW Compact installation area (U-shape) Autoclave ITALMATIC available

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Brand / Model: BILLHÖFER EK 102-50 M Year of Manufacture: 2001 Condition: Excellent condition – with all original documentation Original Automatic Loading Unit: BILLHÖFER A-20 Original Laminating Unit: BILLHÖFER EK 102-50 M Original Separation Unit: BILLHÖFER TM 102-80 Original Collection Table: BILLHÖFER S-20 Sheet Sizes: Maximum: 1020 x 1140 mm, Minimum: 210 x 210 mm Iiodpfx Aextu S Sjc Ask Speed: 50 m/min Board Thickness: 70 – 600 gsm Note: Technical specifications may vary depending on the nature of the work and consumables used.

Condition: good (used), Primultini cutting band saw Roll diameter 1300mm Roll width 140mm Iedpfxed Sclhs Ac Aeik with Planomatic system

Condition: excellent (used), SMT Lathe 80001350   The machine is designed and manufactured to produce rotor shafts for power tools. The machine is designed and manufactured to perform the following operations automatically. - Load/unload parts automatically from/to tool carrier line with a pick & place unit between the shaft ends. - Ring seat turning + commutator facing + commutator turning. - Ring assembly - commutator side - Ring assembly - drive wheel side The machine has several production programmes to produce different parts. Each programme corresponds uniquely to one shaft type Technical data Isdpjhw Emqefx Ac Asik Armature shaft length from to 92.5 - 163.1 mm  Bearing journal diameter commutator side 8; 10; 12.5 mm Drive side 12; 8 mm Min. available length bearing position 3.6 mm Package diameter 52; 55; 59 mm Ring dimensions Outer diameter 40 - 57.4 mm Inner diameter 37.4 - 56 mm Ring width 4 - 8 mm Ring seat diameter 44 - 50 mm Surface ring seat Rz 20 mm Main dimensions and weight of the machine Machine length 2870 mm Machine width 2600 mm Machine height 2530 mm Machine weight 5000 kg Electrical installation Rated current 10 A Rated voltage (AC) 400 V Rated power 7 kVA Rated frequency 50 Hz Pneumatic installation Nominal pressure 5 bar Maximum pressure 10 bar Further articles - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Year 2007 In Production UK Automatic thermal film laminator Automatic sheet feeder Vacuum infeed table Laminating unit with heated chrome cylinder ICS Heating unit Sheet separating unit Pile delivery unit Usable working width (mm): 1020 Minimum size (mm): 250 x 280 Maximum size (mm): 1020 x 1400 Mechanical speed: m/min. 70 Iodpfsv Tbfisx Ac Aeik Size: 102mm x 116mm min 30 x 28 cm speed up to 70 m/min The machine is functional, operational, ready to work.

Condition: good (used), Year of construction: 2021, Manufacturer: GMP (South Korea) Model: QTopic 380 Machine Type: Laminating / Cellophaning Machine Year of Manufacture: 2021 Application: Digital printing, offset printing, finishing & coating Status: Fully operational and ready for immediate use _____ 3. Technical Specifications (Original GMP Data) Machine Specifications Parameter Value Max. Working Width 380 mm Minimum Sheet Size 210 × 297 mm Maximum Sheet Size 380 × 570 mm Paper Weight Range 120 – 350 g/m² Film Types BOPP, PET, matt, gloss, soft-touch, anti-scratch Film Thickness 25 – 42 µm Operating Speed up to 10 m/min Temperature Range up to 150 °C Warm-up Time approx. 10 minutes Power Supply 230 V / 50–60 Hz Power Consumption approx. 1.5 kW Machine Weight approx. 75–85 kg Dimensions (L × W × H) approx. 1,000 × 580 × 400 mm _____ 4. Configuration / Included Features Iiedpjxyi S Hefx Ac Ajk Feature Included Automatic temperature control ✔ Pneumatic pressure-adjustment system ✔ Anti-curl system ✔ Manual sheet feeding ✔ Perforation / cutting unit ✔ Delivery / stacking tray ✔ _____ 5. Machine Condition Technical Condition: ✔ 9/10 – Excellent working condition ✔ Fully serviced, ready for production ✔ No known issues Optical Condition: ✔ 9/10 – Very clean appearance ✔ Minimal signs of use

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total width: 2,350 mm, total length: 6,000 mm, inner dimension length: 3,000 mm, inner dimension width: 1,600 mm, TECHNICAL DETAILS Oven dimensions: 3,000 x 1,600 mm MACHINE DETAILS External dimensions (L x W): 6,000 x 2,350 mm Firing: Gas Orientation: Vertical, for use with vacuum bags; connection to vacuum port inside oven EQUIPMENT 2 x trolleys included The following data is from a general offer; the seller accepts no liability for its accuracy. This also applies to the data sheet in the appendix. Electrical Voltage: 400 V Current: 16 A Frequency: 50 Hz Ijdpfjxur Ndox Ac Aoik Gas Type: Natural gas / Propane / LPG Connection: 1"1/4 Gas pressure: 20–60 mbar Propane/LPG consumption (4 burners): 8 kg Propane/LPG consumption (8 burners): 16 kg Natural gas consumption (4 burners): 9.6 m³ Natural gas consumption (8 burners): 19.2 m³ Temperature range (4 burners): 40–150 °C Temperature range (8 burners): 40–320 °C Power output (4 burners): 96 kW Power output (8 burners): 192 kW

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: bc 62 hotmelt porous coat nordson lamination line, overall weight: 22 kg, type of input current: three-phase, total length: 22 mm, total width: 10 mm, total height: 7 mm, compressed air connection: 8 bar, working width: 1,675 mm, temperature: 250 °C, Equipment: compressor, Nordson complete hotmelt lamination line for technical textiles, hygiene, medical, and automotive applications Speed: 5-350 meters/minute Application range: 0.85 gsm - 100 gsm Iodpfx Acew Rcaas Aeik Product range: Wide range of product processing possibility with inline 2-color flexo printing unit. Hot melt lamination Hotmelt laminator Hot melt lamination line Hot melt lamination stand Hot melt coating stand Hot melt coating line Nordson BC 62 Porous Coating Coating weight: 0.85-60 g/m2 Web width: 1675mm BM 200 bulk melter tank, heated hoses, hotmelt applicator, Metering gear pump station and coating head • Hot melt application gsm: minimum 0.87 gsm/m2 • Hot melt application gsm: maximum 60 gsm/m2 • Hot melts: SIS/SBS, PSA, EVA, PUR based

Condition: excellent (used), Raimann B4 cutting band saw Iedpfx Acodyccdo Aeik

Condition: good (used), Year of construction: 2002, Rondo Laminating and Shaping Line for Yeast Pastries - Smartline and Compactline model - used - year of manufacture: 2002 - length: 15 meters - without tools Ijdpow Nx S Nefx Ac Asik - components: satellite calibrator, dough rolling cylinder, standard calibrator, work table, cutting station, guillotine, discharge table - machine in production - collection from warehouse / shipping option - price on request

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, working width: 1,420 mm, Year: 1986 Width/mm: 1420 Thickness/µm: 14-400 Material: PO, PE, paper, HDPE, LDPE Detail: Plant consists of: 2x Fife edge trim control 2x Ahlbrand MFD 2000 pre-treatment units (year 2001) Isdpfx Asxcy Hyoc Aeik 1x Print Concept UV unit type PC 2w-1600-2x1 (year 2001) Coating unit with individually temperature-controlled rollers. Sleeve system D: 76mm. Several spare parts included.

Year of construction: 2017, condition: excellent (used), Laminating machine with the possibility of wet and dry foiling Year of manufacture 2017 Iiedpelq Dpiofx Ac Aek Max format 1080x1000mm Min format: 300x350 Speed 20-100m/min Paper weight 100-500g Dust remover Servo motor control gauge automatic alignment Heated sheeting knife

Year of construction: 1978, condition: used, 1. Scholz Autoclave - Internal Diameter: 3300mm - Internal Length: 10200mm - Capacity 102000L - Pressure: 15 bar - Year: 197 - Serial: 33189 3. Automated Bogie Loading System - Pneumatic Lowering Drawbridge - KEEVALITE Hydraulic System with Motor - Width: 1500mm - Length: 6000mm 4. Steam, Air & Water Regulation Systems - AUMA Water Regulator/ Valve Actuator Isdpfx Aohgbakjc Ajik - AUMA Steam Regulator/ Valve Actuator - ECKARDT Compressed Air Vent System - ECKARDT Compressed Air Intake System 5. Control Cubicles with TOSHIBA E910 control panel display 6. 8x Loading Frames 7. MORROW ELECTRICS Control Panel for Autoclave Door & Loading

Condition: used, Kaschiermaschine / Lamination machine Billhöfer FK 102 S Baujahr / Year 1997 - Serial-No. 6878 Format min. 300 x 450mm - max. 1040 x 1420mm Grammatur 60 up to 500 gr/m2 card board Bogenanleger / automatic Feeder Billhöfer A-20-P Glättekalander GK-4-1080 Kaschierwerk / Lamination Unit FK 102 S Bogentrenner Achilles BT 4.1 Bogenabstapler Gremser S102A1 >Inline Prägekalander gehört nicht dazu, Inline Embossing kalander not included< Iisdpfjwtygksx Ac Aok Specifications: Pneumatische Seitenmarke / pneumatic Sheet mark Fa. TPM Elektronische Überlappungssteuerung / Electronic overlap Control Fa. PME Automatische Folienrollenspannung Fa. Achilles Folirnschneidvorrichtung mit pneumatisch geregelter Aufwicklung Fa. TPM Perforationsvorrichtung am Trenner Trenner Achilles BT 4.1, elektronische Trennpunkteinstellung Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2015, condition: excellent (used), Direct gravure type A process of coating film or Aluminium with a coating agent or laminating it with another substrate. Line water.solvent based coater plus inline solvent based laminator Iodpfx Ajwp Sausc Ajik Product width: Max 1,700mm Materials: 9~50um (PET), 10-60um(CPP), 10~70m (OPP), 20~ 100um (Aluminium) Speed: 300mpm (commercial 50-250 mpm) Volume:
 max 900mm Unwinding tension: 100-1,000N 
 Unwinding diametr: max 1,000mm (3in, 6in) Winding tension: 100-1000N Drying
temperature: Max 230°C (4m x 6 Zones)

Year of construction: 1985, operating hours: 25,000 h, condition: used, functionality: fully functional, machine/vehicle number: -, Fully operational flame lamination machine, in daily use on one or two shifts until December 2019, and regularly upgraded for electrical, mechanical, and methane gas systems. This is an Italian construction machine from the early 1980s. The machine dimensions are 4 meters by 11 meters. It can handle rolls up to 1.80 meters in height. Lamination thickness ranges from 2 mm to 35 mm. Both cylinder speeds, burner position, and flame intensity are adjustable. We typically laminate EPE or PU foams together or with fabrics, synthetic leather, or cotton fabric. Iisdpfx Ajwyxpkjc Ask

Year of construction: 2018, operating hours: 100 h, condition: as good as new (ex-display), Klieverik laminating calender with few operating hours. Approx. 100h. The machine can be inspected on site. Condition as new. The machine has never been in serial production. Sale from place. Ijdpfxohd N Dao Ac Aoik

Year of construction: 2017, condition: like new (used), functionality: fully functional, Fours H&C 2-level oven max 3460 mm x 2200 mm Year: 2024 Dimensions of glass supports:- Support 1 = 3260mm x 2200mm - Support 2 = 3460mm x 2200mm Approximate external dimensions of the oven: Width: 4300mm Height: 2710mm Depth: 3260mm + rails Maximum temperature: 160°C Power: S-LTD-298 Ijdpfovyzh Rox Ac Aoik

Condition: new, Year of construction: 2025, Ballshaping- and Delaminationmill Molinator for fine delamination! Diverse Types: RW VKR16/3 / 22-37kW and RW VKR 22/3 / 75-110kW Input Composite Material Examples: Regrind from hair-wire, printed circuit boards, electronic circuits, other composited material. Al / Plastic, Cu / Plastic, Cu / Glass fibre, ABS / Plastic fibres, etc. Ijdpjdwqiujfx Ac Aoik Type selection: depending on the material / depending on layer thickness / depending on test‘s / according to the desired throughput. Description Molinator: In the inner acts very high forces (High acceleration / high relative-speed)! Bigger parts will be delaminated. Composite-material separates at the phase of boundaries. Metals will be ballshaped. Plastics depending on the specifications stays “fluffy” or will be grinded. These effects besides the desired delamination, are helpfully for the separation and are exactly coordinated to our separation-technology like Fluid Bed Separators / Sievemachines / Sifters.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 11123292, input voltage: 400 V, total length: 3,555 mm, total width: 1,350 mm, total height: 2,600 mm, compressed air connection: 6 bar, type of input current: three-phase, overall weight: 999 kg, input current: 16 A, Equipment: documentation/manual, A Bochonow automatic screen developing system from 2012 is for sale. --- Bochonow automatic screen development system in 2012 Model S material stainless steel screen size 1400mm x 2400mm depth: 1350mm width: 3555mm height 2600mm Ijdpfov Ikfhox Ac Asik Transportation, assembly, at your expense Please do not hesitate to contact us if you have any questions and concerns more pictures and a short video! best regards Markus

Condition: good (used), Year of construction: 2004, functionality: fully functional, SPS VITESSA CLASSIC G2 COATING MACHINE TYPE : CLASSIC G2 SIZE : 74 x 104 cm DETAILS Automatic Spot Coating Machine, Iijdpfxovy Haxs Ac Aok Max Sheet Size 74 X 104cm, Min sheet 32 x 45cm, Automatic Pile Suction Feeder Very Good Condition Immediately Available

Condition: new, power: 83 kW (112.85 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 3,350 mm, fuel: diesel, gearing type: mechanical, loading space length: 6,130 mm, loading space width: 2,350 mm, loading space height: 2,200 mm, Year of construction: 2024, Equipment: ABS, air conditioning, = Additional options and accessories = - Halogen headlights - Hydraulic power steering - Power steering - Sun visor - Tachometer = Remarks = Model description: MITSUBISHI CANTER CHASSIS,170L TANK (4×2) 4.2 TON DIESEL MY24 Light Duty Code Diesel Max Output: 113 PS @ 3200 RPM Max Torque: 31 KGF.M@ 1600 RPM Gear Box: 5 forward + 1 reverse Shipping Dimension: 6.13 X 2.35 X 2.2 m (LXWxH) Brakes: Exhaust brake Tire: 7.50R16 119/117 Iiedew Dup Iepfx Ac Aok Battery: 24 Volt, Regulated control - 12 Volt X2 Tool set & Jack Fabric seat Interior Rear View Mirror Antenna 2 Speakers Harness Floor Console Cup Holder Halogen head lamps Reverse warning buzzer Water separator in fuel line LED Room Lamp Cigeratte Lighter Silvered Color Wheel Laminated wind shield glass Vinyl Floor Mats Tilt & Telescope Steering Wheel Speed Indicator Warning = More information = Empty weight: 2.305 kg Carrying capacity: 4.200 kg GVW: 6.500 kg Fuel tank: 170 litres Number of seats: 3

Condition: new, power: 83 kW (112.85 HP), wheelbase: 3,350 mm, gearing type: mechanical, Year of construction: 2024, Equipment: ABS, air conditioning, = Additional options and accessories = - Halogen headlights - Hydraulic power steering - Power steering - Sun visor - Tachometer = Remarks = Model description: MITSUBISHI CANTER CARGO BODY,170L TANK (4×2) 4.2 TON DIESEL MY24 Light Duty Code Diesel Max Output: 113 PS @ 3200 RPM Max Torque: 31 KGF.M@ 1600 RPM Gear Box: 5 forward + 1 reverse Shipping Dimension: 6.15 X 2.20 X 2.2 m (LXWxH) Brakes: Exhaust brake Cargo Body Size: 4.3 X 2.18 X .038 m ( LXWXH) Iisdpfx Ajw Duphec Aok Tire: 7.50R16 119/117 Battery: 25 Volt, Regulated control - 12 Volt X2 Tool set & Jack Fabric seat Interior Rear View Mirror Antenna 2 Speakers Harness Floor Console Cup Holder Halogen head lamps Reverse warning buzzer Water separator in fuel line LED Room Lamp Cigeratte Lighter Silvered Color Wheel Laminated wind shield glass Vinyl Floor Mats Tilt & Telescope Steering Wheel Speed Indicator Warning = More information = Empty weight: 2.305 kg Carrying capacity: 4.200 kg GVW: 6.500 kg Dimensions (LxBxH): 603 x 204 x 221 cm Fuel tank: 170 litres Number of seats: 3