Used Laser Weld for sale (7,595)

Condition: good (used), Year of construction: 2011, machine/vehicle number: 11095150, IPG Laser GmbH used 4kW laser source with cooling unit 400-460V AC 3P/PE 50/60 Hz 30.8A year of construction 2011 DWG number: G25-16-100920-2 Cooling unit: LC170.01-W3.5 Year of construction 2010 3/PE - 400V 50Hz Itedsrq D D Eepfx Adwob 21,8A 4pcs available

Condition: new, Year of construction: 2025, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... Itedemk S Slepfx Adweb We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 4,000 h, General Data Measurements width 5000 mm Measurements depth 2700 mm Measurements height 1770 mm Machine weight 2400 kg Main Drive Laser power 1,5 kW Itjdpex D R T Tefx Adwjb Movement X-Axis Movement 3000 mm Y-Axis Movement 1500 mm Table Outer length 3000 mm Outer width 1500 mm This Sei Laser Mercury 1530 Fiber laser cutting machine was manufactured in the year 2017 and has 4000 production hours. The machine has a laser power of 1,5 kW. Application Types Cutting

Year of construction: 2007, condition: excellent (used), We offer a complete Laser marking machine: - DOMINO DSL1 laser - Cabin according to protection class 1 - axis for rotation - conveyor belt - computer the tipe of laser: DOMINO DSL1 10-60 Laser power: 10 W. Lasertype: closed CO2 laser, 30000 hours medium failure-free time Characters per second: 400 (depending on the product material and system configuration) character height: 0,5 - 120 mm (0,02 - 119,89 mm) focal length: 100 mm (208 mm optional) labeling field: 60 x 60 mm Font: Pseudo-True Type laser head: construction made of stainless steel and aluminum operating temperatur: 15 - 38 C cooling: air Isdpsd N Hgusfx Adwstb Dynamark-Software The following materials can be marked by a CO2 laser: - Painted or coated metals - Glass - ceramics - Carton - Different types of plastic

Condition: good (used), Arm length: 2x1800mm Iedpfx Aotxpgvjdwetb

Condition: used, Year of construction: 2017, Robot cell ABB robot with Clean Laser Manufacturer: ABB / Clean Laser Itsdpewrcn Ujfx Adwob Model: IRB4600 Year of manufacture: 2017 System consists of: ABB robot IRB4600 Control cabinet Handheld operator panel Laser cleaning device Clean Laser type intelliScan30 Extraction unit TEKA

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 500 h, laser type: CO₂ laser, laser source manufacturer: Iradion Laser, laser source model: TL2, laser hours: 500 h, laser power: 80 W, laser wavelength: 10,600 nm, table length: 726 mm, table width: 432 mm, working height: 170 mm, travel distance Z-axis: 200 mm, Equipment: CE marking, documentation/manual, emergency stop, Trotec Laser Speedy 300FLEXX – 80 W CO₂ + 20W FIBRE Professional laser engraving and cutting machine Trotec Speedy 300 FLEXX 80W CO2 + 20W Fibre, renowned for its reliability, precision, and speed. Ideal for engraving and cutting wood, plastics, acrylics, leather, paper, and similar materials. Technical Specifications: - Laser technology: CO₂ + Fibre - Power: 80 W CO₂ + 20W Fibre - Working area: 726 × 432 mm - Maximum engraving speed: up to 3.55 m/s - Automatic autofocus - USB connection - Compatible with graphic software (CorelDraw, Illustrator, etc.) Iedpfx Ajx N Urajdwjtb Compact, robust machine suitable for intensive professional or artisanal use.

Year of construction: 2013, condition: ready for operation (used), An IPG laser source with peripheral equipment is available. 1) IPG Laser YLS-3000-CT, year of manufacture: 2013, wavelength: 1070nm, modulation: 0kHz-5kHz, power control range: 10%-100%, power stability: +/-1%. Machine dimensions X/Y/Z: approx. 800mm/800mm/560mm, weight: approx. 400kg. 2) Industrial chiller IPG Laser LC 170.01-A.3.5, year of manufacture: 2013, cooling capacity: 17kW, max. operating pressure: 28bar, refrigerant: R407C, refrigerant quantity: 3.5kg. 3) Wire feeder Dinse DIX WD 300, feed rate: 20m/min, wire diameter range: 0.8mm-1.6mm, machine dimensions X/Y/Z: approx. 300mm/250mm/250mm. 4) Laser process head. Documentation available. On-site inspection is possible. Itedpfox H S Nwjx Adweb

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Series: GS-CEH Type: Exchange table, full protection, full protection exchange table Laser power: 3KW, 6KW.12KW, 15KW, 20KW Standard hardware: Scrap car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, rear lift light-blocking door, beam light curtain, partition dust removal Optional hardware: Fire bricks, high-pressure proportional valve (standard above 6KW), safety door lock, independent laser cabinet, rear exchange table light curtain, rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, light-blocking rubber strip Itedswxar Djpfx Adwob Optional functions: FDA configuration CSA configuration, TUV configuration conventional CE configuration

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 3,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Working Area (mm): 3048×1524 X-Axis Travel (mm）: 1524 Y-Axis Travel(mm）: 3048 Z-Axis Travel（mm）: 80 X/Y Axis Positioning Accuracy: ≤0.03mm/m X/Y Axis Repositioning Accuracy: ≤±0.02mm Maximum Synthetic Positioning Speed: 150m/min Maximum Acceleration: 1.2G Cutting Slit Width: 0.1mm-0.5mm (measured for platesless than3mm thick) Isdpfxjxvwcxs Adwstb Cutting Surface Roughness: Ra3.2um-Ra25.4um(measured for plate thickness below3mm） Floor Size(mm): 6000*3000 Mainframe Dimension(mm): 5000*2300*1800 Screen Size: 21"LCD TransmissionMode: Rack andpinion dual drive Table Loading Capacity: 1.1(ton)

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: 18089754, laser type: fiber laser, Description: High-performance fiber laser from IPG Laser GmbH, manufactured in Germany. The laser is designed for industrial applications such as cutting, welding, or surface processing and is distinguished by high efficiency, stable beam quality, and robust construction. Technical data: Manufacturer: IPG Laser GmbH, Burbach, Germany Model: YLS-4000-S2T Serial number: 18089754 Year of manufacture: September 2018 Rated voltage: 400–460 V AC, 3 phases + PE Frequency: 50 / 60 Hz Full load current: 29.3 A Circuit protection: 32 A / 120 kA CE marking: present Itedpfxsxv Dp Sj Adwjb

Condition: new, Year of construction: 2024, functionality: fully functional, laser wavelength: 1,064 nm, AL, ALM, ALW tilt and swivel optics (KSO), new 1 year guarantee, still packed. Other devices and accessories in stock on request. Sale only within the EU. Laser welding consumables, Lawitex starter pack. As a laser welding wire manufacturer, we can create a wire selection specifically for your wire selection specifically for your requirements, welding parameters are personally customized by us. Iodpfx Aspcf Ntsdwjtb explained and stored for easy retrieval. We supply original Alpha Laser spare parts, offer application product training and service at very good conditions. We are an official sales partner for Alpha Laser laser welding systems and, thanks to our almost 30 years of experience in the field of welding technology, we offer advanced laser welding technology from a single source. Inquiries, explanatory welding training and instructions (also by telephone) in: German, English and Polish Supplier Lawitex GmbH 40764 Langenfeld (Rhineland), DE

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,000 h, control type: CNC control, actuation type: electric, laser type: fiber laser, laser source manufacturer: SPI, laser hours: 600 h, laser power: 1,500 W, sheet thickness (max.): 5 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 5 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, table length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 60 mm, overall weight: 3,000 kg, total length: 5,000 mm, total width: 2,000 mm, total height: 2,000 mm, Equipment: cooling unit, dust extraction, emergency stop, The SeiLaser is a 1.5 kW laser cutting machine for sheet metal. The machine functions perfectly and has not been used for 2 years. It was used for in-house needs only and was not operated in a production line. Iedsxnkdaepfx Adwjtb

Condition: new, functionality: fully functional, Year of construction: 2025, working width: 600 mm, Series: GB-E Bending pressure: 130KN Bending length: 600(mm) Ijdpfxswzqn Ue Adwstb

Condition: new, Year of construction: 2024, functionality: fully functional, -Yaskawa GP50 robot with YRC1000 Controller -Laserline LDF6000-60 power unit; •Maximum continuous wave power output 6000W Itsdpfx Aerwwzyodwsb • Emitted light wavelength range 900-1070nm • Air to water with 6kW cooling capacity cooling with the help of cooler • 600μm in diameter and 20m in length optical fiber • Annular slit laser coating nozzle water-cooled working optics OTZ-5 • COAX-8 type. The optics specified has a zoom mechanism. • Focus point from 2.28 mm to 7.32 Allows continuous change to mm • CMOS attached to optics for process monitoring camera • Water-cooled side panel that can be installed on OTZ-5 coating nozzle -PF2/2 Power Feeder; •Electronic control • Remote control with robot controller • 2 chambers with a capacity of 5 liters • Heater -Slider; • For Y-axis movement of the robot group Provides linear movement suitable for the process. • 1x Yaskawa Servo Motor, • 1 x Linear (6m), Rack and Pinion • Automatically by the carrier robot will be checked -Two Axis Positioner; • Max. 5,000 kg carrying capacity, • Rotation Axis Servo with Yaskawa Robot and Synchronous motion, • Tilt Axis Servo Motor index control • Movement Range of Tilt Axis +/- 90°, • Rotation Axis Movement Range +/-360° • Max. Product diameter 800mmand max. Product weight is 8 tons. • Positioner as single axis support and hydraulic tailstock when used with carrying capacity max. 8 tone • Positioner can be used as two axes If desired, the carrying capacity is max. 3 is the tone -5T Tailstock; • Max. 5,000 kg carrying capacity • Hydraulic -Two Axis Positioner 5T Support; • 4 m long for cylinder supports a rail base • 1 5 ton roller support • Different sizes from 200 mm to 800 mm Suitable and adjustable for diameters. • Maximum Load 5,000 kg

Condition: used, functionality: fully functional, Year of construction: 2020, We provide laser REPAIR services for all kind of IPG lasers. We replace broken laser modules with referbished fully functional ones, do all adjustments and make your fiber laser up and running! No matter what the problem is with your IPG Laser Source, we bring it back to life. Not only IPG sources, we repair Max Photonics, Raycus and other laser sources with our more than 10 years of experience in fiber laser industry. Isdpfx Ajwf Hxqsdwjtb

Condition: used, functionality: unexamined, Year of construction: 2003, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, type plate available, TRUMPF Laser HL204P/4 LCU * used, MFD 2003 * av. laser power: 200 W Itodoxxbnkspfx Adweb * max. pulse power: 7 kW * max. pulse energy: 75 J * wavelength: 1064 nm * beam switch for 2 fibers, min. core diameter 400 µm * fiber connector: LLK-B * incl. control PC * incl. foot switch * incl. 2 fibers, each 1 cutting- und welding head and 1 binocular * incl. documentation (German)

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, DNE-Laser, a wholly owned subsidiary of the Bystronic Group, has established itself as a leading manufacturer of laser cutting machines. The product range includes tube and profile lasers as well as flatbed lasers, which are known for their robustness and user-friendliness. Each machine is easy to program. In addition, it is possible to connect an automatic tube feeder to the machine using a semiloader and a bundle loader. Only reputable and high-quality components are used in the construction of the laser machines. This integration significantly increases efficiency in the production process. The time savings when loading the machine are significant, as manual handling is reduced. This not only leads to faster production times but also minimizes the cost per part. Processing lengths of raw material: 6.9-12 meters, diameters from 8 to 520 mm, power up to 12 kW... Investing in a DNE laser machine offers not only excellent value for money but also long-term support from the service provided by Airtech Stickstoff GmbH, which has its own highly experienced and competent service team for over 10 years. Itedpfx Adowmyv Soweb Reliable spare parts supply ensures the operational readiness of the machines and minimizes downtime. Currently, around 110 laser machines are on the market and in operation through Airtech Stickstoff GmbH, which impressively demonstrates the high demand and customer satisfaction. DNE-Laser thus remains a top choice for companies looking for high-quality and reliable laser cutting solutions.

Condition: new, Year of construction: 2025, DNE pipe and profile laser cutting machines (one of the best systems on the market) are characterized by a top price-performance ratio. The machines are robust, fast and dynamic in operation. You can choose between a semi-automatic and a fully automatic pipe loader. These machines are available with diameters of up to 240mm, 350mm and 520mm as well as 640mm. Itsdswzv Efepfx Adweb Laser outputs from 3 to 12 kW and lengths of up to 12 meters. A 45 degree laser cutting head is also available. We would be happy to make you an offer and are convinced that you will be satisfied. Our own German service team will accompany you from the installation of your laser cutting system to training.

Condition: new, Year of construction: 2025, DNE-D-Soar plus is a state-of-the-art solution for contract manufacturing that impresses with extremely fast and dynamic cutting processes. This device sets new standards in almost all cutting areas and offers superior performance, which is reflected in the best workmanship. The simple operation ensures that even less experienced users can quickly become familiar with the machine. In terms of price, DNE-D-Soar plus is extremely attractive and represents an economical alternative to the well-known system manufacturers who value quality without breaking the budget. This system is available with either full or partial automation. Ijdpfxsuiyr Ie Adwjtb The attractive design fits harmoniously into modern production environments. Thanks to Bystronic's many years of experience, innovative technologies and proven processes have been incorporated into the development of this machine. Overall, DNE-D-Soar plus is an excellent investment for companies looking for a powerful, flexible and future-proof cutting system. The machine is available with 45 degree laser heads. Length from 4,000 to 12,000 mm Width up to 2,500 mm Laser power from 15,000 watts to 60,000 watts Maximum axis speed 280 m/min x/y Maximum acceleration 2.8 G Hydraulic material table Machine weight from 12,500 to 29,700 kg Hydraulic table included

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 12,000 W, table length: 4,000 mm, table width: 2,000 mm, cutting speed: 2,800 mm/min, workpiece weight (max.): 3,000 kg, overall weight: 18,500 kg, total length: 12,500 mm, total width: 3,650 mm, total height: 2,620 mm, warranty duration: 12 months, working range: 4,000 mm, Equipment: cooling unit, documentation/manual, safety light barrier, Standard Equipment Raycus fiber laser source Bystronic DNE Copyright cutting head Bus control cutting software Hypcut FSCUT 8000C Herion rack and pinion M3 Parallel shuttle table (two levels) TBI ball screw (Taiwan) Itsdpfx Adjwna S Aowob Won linear guide (South Korea) Neugart reduction gear (Germany) Servo drive and motor Inovance or Schneider Welded machine tool body PC "I7_CPU 8GB 120GB 10kW Monitor Capacitive touchscreen (21.5-inch XC-2209CMDR) Proportional valve "Felton low pressure 10kW PLC hardware Schneider Electrical control cabinet Independent control cabinet (Bystronic DNE Copyright) Hydraulic shuttle table Exhaust system 7.5 kW Resonator 36 kW Chiller 15 kW

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 12,000 W, The D-Power laser cutting machine with shuttle table is the ideal solution for beginners. With a generous table size of 1500 x 3000 mm and extended options from 2000 x 4000 mm to 2500 x 6000 mm, 2500 x 8000 mm, and 2500 x 12000 mm, and a laser power of 3,000, 4,000, and 12,000 watts, this machine covers a wide range of applications. Itsdpfx Adownbmnjwjb A particularly noteworthy feature is the pivoting laser head, which can be ordered separately if required to enable bevel cuts. This functionality significantly expands the machine's application possibilities, creating scope for creative solutions in metalworking and beyond. The price-performance ratio of the D-Power laser cutting machine will surprise you. You get high-quality technology and performance at an attractive price, making it an excellent choice for companies and craft businesses looking to enter the world of laser cutting. Take advantage of cutting-edge technologies and increase the efficiency of your production processes with this powerful and versatile machine.

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: -, laser power: 12,000 W, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness stainless steel (max.): 50 mm, sheet thickness aluminum (max.): 40 mm, sheet thickness brass (max.): 40 mm, sheet thickness copper (max.): 40 mm, table length: 4,000 mm, table width: 2,000 mm, working length: 4,000 mm, working width: 2,000 mm, travel distance X-axis: 2,050 mm, travel distance Y-axis: 4,050 mm, feed rate X-axis: 280 m/min, feed rate Y-axis: 280 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 1,800 kg, power: 6,000 kW (8,157.72 HP), type of input current: three-phase, type of cooling: water, overall weight: 9,500 kg, total length: 10,880 mm, total width: 3,380 mm, total height: 2,280 mm, warranty duration: 12 months, space requirement height: 3,000 mm, space requirement length: 11,500 mm, space requirement width: 4,500 mm, Equipment: cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, DNE D-Power – The High-Performance Laser Cutting Machine for Your Production Iedpfxowzv E So Adwjtb The D-Power laser cutting machine with exchange table is the ideal solution for beginners. With a generous table size of 1500 x 3000 mm and extended options ranging from 2000 x 4000 mm to 2500 x 6000 mm, 2500 x 8000 mm, and 2500 x 12000 mm, and laser power of 3,000, 4,000, and 12,000 watts, this machine covers a wide variety of applications. The value for money of the D-Power laser cutting machine will surprise you. You receive high-quality technology and performance at an attractive price, making it an excellent choice for companies and craftsmen who want to enter the world of laser cutting. Take advantage of the latest technologies and increase the efficiency of your production processes with this powerful and versatile machine.

Condition: new, functionality: fully functional, Year of construction: 2025, This machine convinces with a top price-performance ratio and CE standard. You will be surprised. DNE laser cutting machines for professional use in industry and trade. We offer you an absolute top product in terms of reliability and cutting performance tailored to your needs. Our German service team ensures smooth installation and commissioning of the laser cutting system as well as subsequent training. We also carry out service and maintenance work. You can also contact us if you are looking for financing. You are welcome to convince yourself of the statements made during a visit and demonstration. A 45-degree laser cutting head is also available for processing welding bevels or countersinks. The laser cutting machines are available in the following processing sizes: Isdpfxoq U A H Ao Adwotb Sheet metal nominal dimension X 3000 mm x1500 mm, 4000 mm x 2000mm, 6000 mm x 2000mm, 6000 mm x 2500mm. Laser power from 2000 watts to 15,000 watts is available.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, table length: 4,000 mm, table width: 2,000 mm, positioning accuracy: 0.05 mm, workpiece weight (max.): 1,800 kg, overall weight: 8,000 kg, total length: 10,880 mm, total width: 3,380 mm, total height: 2,280 mm, warranty duration: 12 months, space requirement height: 3,000 mm, space requirement length: 11,500 mm, space requirement width: 4,500 mm, DNE D-Power – The High-Performance Laser Cutting Machine for Your Production The D-Power laser cutting machine with exchange table is the ideal solution for beginners. With a generous table size of 1500 x 3000 mm and extended options ranging from 2000 x 4000 mm to 2500 x 6000 mm, 2500 x 8000 mm, and 2500 x 12000 mm, and laser power of 3,000, 4,000, and 12,000 watts, this machine covers a wide variety of applications. Itjdpfx Aswnmh Rsdwsb The value for money of the D-Power laser cutting machine will surprise you. You receive high-quality technology and performance at an attractive price, making it an excellent choice for companies and craftsmen who want to enter the world of laser cutting. Take advantage of the latest technologies and increase the efficiency of your production processes with this powerful and versatile machine.