Used Lath Macgine for sale (5,369)

Condition: good (used), Year of construction: 2018, Automation system Turning diameter over bed: 760 mm • Turning diameter over cross slide: 600 mm • Maximum turning diameter: 460 mm Distances • Distance spindle – tailstock center (TA640): 689 mm • Distance chuck – tailstock (TA640): 625 mm Travel paths • X-axis travel: 310 mm • Z-axis travel (TA640): 640 mm • Y-axis travel: +70 / −50 mm • B-axis travel (TA640): 640 mm Rapid traverse • Rapid traverse X: 30 m/min • Rapid traverse Z: 30 m/min • Rapid traverse Y: 15 m/min • Rapid traverse B: 11 m/min (optional 30 m/min) Axis dynamics • Axis acceleration: 1 g (9.8 m/s²) Spindle • Maximum spindle speed: 3500 rpm • Spindle bearing Ø outer: 200 mm • Spindle bearing Ø inner: 130 mm • Spindle nose: ASA 8” A2 • Spindle bore: 86 mm • Bar capacity through draw tube: 78 mm Chuck • Chuck Ø: 250 / 315 mm • Chuck bore Ø: 77 mm Power & Torque • Main spindle power: 42 / 27 kW (max. / S6 40%) • Maximum torque: • 1020 Nm (max.) • 720 Nm (S6 40%) Tailstock • Morse taper: MT5 / MT3 Cpodpeyhqg Nofx Afpsu • Tailstock travel (TA640): 640 mm • Maximum quill pressure: 1350 kgf

Condition: good (used), Year of construction: 2018, Turning diameter over bed: • 760 mm Turning diameter over cross slide: Cjdpoyhqavsfx Afpspu • 600 mm Maximum turning diameter: • 460 mm Distance spindle – tailstock center TA400: • TA15: 490 mm • TA20: 473 mm • TA25: 473 mm • TA30: 449 mm TA640: • TA15: 730 mm • TA20: 713 mm • TA25: 713 mm • TA30: 689 mm TA1100: • TA15: 1190 mm • TA20: 1173 mm • TA25: 1173 mm • TA30: 1149 mm Distance chuck – tailstock TA640: • TA15: 666 mm • TA20: 649 mm • TA25: 649 mm • TA30: 625 mm TA1100: • TA15: 1126 mm • TA20: 1109 mm • TA25: 1109 mm • TA30: 1085 mm Travels X-axis: • All models: 310 mm Z-axis: • TA400: 400 mm • TA640: 640 mm • TA1100: 1100 mm Y-axis: • +70 / −50 mm (for Y versions) B-axis: • TA400: 400 mm • TA640: 640 mm • TA1100: 1100 mm Rapid traverses X-axis: • 30 m/min Z-axis: • 30 m/min Y-axis: • 15 m/min B-axis: • 11 m/min (standard) • 30 m/min (option) Axis acceleration: • 1 g = 9.8 m/s² Spindle Maximum spindle speed • TA15: 4,500 rpm • TA20: 4,000 rpm • TA25: 4,000 rpm • TA30: 3,500 rpm Spindle bearing Ø outer • TA15: 150 mm • TA20: 170 mm • TA25: 170 mm • TA30: 200 mm Spindle bearing Ø inner • TA15: 100 mm • TA20: 110 mm • TA25: 110 mm • TA30: 130 mm Spindle nose • TA15 / TA20 / TA25: ASA 6" A2 • TA30: ASA 8" A2 Spindle bore • TA15: 61 mm • TA20: 73 mm • TA25: 73 mm • TA30: 86 mm Bar capacity through draw tube • TA15: 52 mm • TA20: 66 mm • TA25: 66 mm • TA30: 78 mm Chuck Chuck diameter: • TA15: 175 / 210 mm • TA20: 210 mm • TA25: 250 / 210 mm • TA30: 250 / 315 mm Chuck bore Ø: • TA15: 56 / 52 mm • TA20: 66 mm • TA25: 66 mm • TA30: 77 mm Power & torque Main spindle power (kW): • TA15: 14 / 8 • TA20: 22 / 15 • TA25: 35 / 19 • TA30: 42 / 27 Maximum torque: • TA15: 292 Nm (max) / 153 Nm (S6 40%) • TA20: 366 Nm (max) / 286 Nm (S6 40%) • TA25: 900 Nm (max) / 363 Nm (S6 40%) • TA30: 1020 Nm (max) / 720 Nm (S6 40%) Tailstock Morse taper: • MT3 / MT4 Tailstock travel: • TA400: 400 mm • TA640: 640 mm • TA1100: 1100 mm Max. quill pressure: • TA15: 930 kgf • TA20: 980 kgf • TA25: 980 kgf • TA30: 1350 kgf

Condition: good (used), Subject to differential taxation according to §25a of the VAT Act. You will receive a proper invoice, however, VAT will not be shown separately. Internal item no.: 26010 You are welcome to inspect the machine under power in our heated warehouse of over 500 m². Leadscrew and feedshaft lathe Voest Alpine DA180 + Coolant system + Röhm 200 four-jaw chuck + Chuck guard (with switch) + Multifix "B" Motor: 380 Volt / 5.5 kW Speed: 44 - 2,000 rpm Swing over bed: 380 mm Swing over cross slide: 185 mm Turning length: 1,000 mm Centre height: 180 mm Bed width: 330 mm Spindle bore: 52 mm Tailstock taper: MK 4 Csdoyg Dtgepfx Afpepu Dimensions (LxWxH): 220 x 120 x 160 cm Weight: approx. 1,200 kg The machine comes from an educational institution and is in well-maintained condition.

Condition: good (used), Year of construction: 1983, Margin scheme taxed according to §25a German VAT Act. You will receive a proper invoice; however, VAT will not be shown separately. Cpedpsyg Dl Asfx Afpou Internal article no.: 26012 You are welcome to inspect the machine under power on over 500m² of heated storage area. Leadscrew and feed shaft lathe Voest Alpine DA180 Max. swing over bed: 380mm Distance between centers: 800mm Spindle bore: 52mm Tailstock: MT4 Multifix "B" basic holder Chuck guard (with switch) Röhm 3-jaw chuck 200mm Dimensions (LxWxH): 250 x 140 x 140cm Weight: approx. 1200kg The machine comes from a training facility and is in well-maintained condition.

Condition: excellent (used), Year of construction: 2021, INDEX C200, Codsx Av Dbspfx Afpspu Mfd. 2021 Control: Siemens Solution Line 3 Turrets 2 Spindles D=90 mm IRCO VDI 30 With tooling prictured Short magazine bar Feed Machine located in Europe

Condition: good (used), Year of construction: 2018, functionality: fully functional, The following are for sale here: 1 x MultiSwiss 16-6 from year 2018 Csdex Na Slspfx Afpspu 2 x MultiSwiss 14-6 from year 2017 2 x MultiSwiss 14-6 from year 2015

Condition: used, Year of construction: 1996, turning diameter 320 mm turning length 1100 mm control Fanuc Cpjdpfjyg Rbdsx Afpeu

Condition: used, Year of construction: 2009, dist. between centers 4.500 mm greates pass round over bed 820 mm Maximum cutting diameter 530 mm Cpsdoyhq Tvepfx Afpeu control Heidenhain Manual Plus 4110 workpiece weight max. 2.500 kg spindle bore 128 mm spindle nose DIN 55027 B11 turning speed range - spindle 0 - 1800 U/min phase 1 0 - 450 U/min phase 2 20 - 1.800 U/min Max. torque stage 1 3.000 Nm Max. torque stage 2 540 Nm travel -x axis 360 mm travel -z axis 4.500 mm feed capacity - x 10 kN rapid traverse 10.000 mm/min dia. of quill 115 mm total connected load 55 kVA machine weight ab. 7000 kg dimensions of the machine ca. 6.500 x 1.840 x 1.860 mmxmmxmm Equipment/accessories: -1 x faceplate -5 x jaw chucks -1 x closed steady rest -Clamping jaws -Multifix holder -Turning tools -Various tips -Technical documentation

Condition: used, machine/vehicle number: 19013, Combined copying milling machine - lathe MICHÄL KÄMPF Cjdpfx Ash Axryefpopu Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Weiler Primus VC Precision Centre Lathe Equipped with 3-axis HEIDENHAIN digital readout (latest generation) With VC drive for stepless speed adjustment and CE-compliant, in virtually as-new geometric condition Technical Data: Year of manufacture: 1999 Machine No. 208 Centre height: 140 mm Centre distance: 500 mm Swing over bed: 280 mm Swing over cross slide: 135 mm Spindle speeds: up to 4,000 rpm, stepless Main drive: approx. 4 kW Spindle bore: 40 mm Short taper spindle nose DIN 55027 size 5 with bayonet locking Tailstock: MT 3 Quill stroke: 40 mm Longitudinal feed: 0.02 to 0.63 mm/rev Cross feed: 0.005 to 0.2 mm/rev Metric thread pitches: 0.25 to 8 mm Module pitches: 0.2 – 4 mm (19 pitches) Weight: approx. 800 kg Machine dimensions (W x D x H): 1.4 m x 0.935 m x 1.55 m Accessories and Equipment: - 3-Axis HEIDENHAIN digital readout (latest generation) - Display for spindle speed - 140 mm 3-jaw chuck with reversible jaws - Multifix quick-change tool post, size “A” Cpsdpfx Afsyglk Hspsu - Electrically interlocked safety chip guard - Covered leadscrew and feed shaft - Lockable tool compartment - Rear splash guard - Simple bed stop - Switchable spindle brake - Operating manual - Machine lamp The machine comes from a vocational school and is in exceptionally top condition. Thanks to its safety features and renowned WEILER precision, this lathe is ideal for training as well as tool and machine construction. Note to all private buyers: The price of the machine is well into the five-digit range.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Control: FAGOR 8055 FL Cpedpfx Asyhguiefpeu Swing diameter over bed: 475 mm Distance between centers: 1000 mm Spindle speed: 100–4500 rpm Spindle bore: 62 mm Three-jaw chuck SCHUNK Rota-S-Plus 250/62 4-position quick-change toolholder, controlled Dimensions (LxWxH): 3000 x 1850 x 2000 mm (height) Weight: approx. 3000 kg

Condition: good (used), Year of construction: 2002, functionality: fully functional, CNC control Max. bar diameter: 26 mm Max. spindle speed: 50 - 7,000 rpm 3 cross slides Turret with 6 stations Codpsyhd Aqofx Afpspu Bar feeder IEMCA BOSS 432/32 N Max. bar length: 3,200 mm

Condition: excellent (used), Year of construction: 2004, turning diameter 850 mm Cpodpjyhrb Ujfx Afpeu turning length 2200 mm control Siemens 840 D

Condition: ready for operation (used), Lathe Fabr Takisava Type TAL 510 with lathe chuck + quick-change holder + center punch Cedpovyuuqsfx Afpopu

Condition: used, Year of construction: 1996, turning length 1.000 mm turning diameter over bed 400 mm turning diameter over slide 240 mm spindle bore 52 mm spindle tunring speed 30 - 1.600 U/min In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Codpfx Afeygm Ugopepu Prior sale is reserved.

Condition: good (used), Year of construction: 2016, functionality: fully functional, Fanuc control system, gantry loader, one turret with Y-axis, two spindles, loader is designed for forged or sawn parts. Cpedpfx Afoyg H U Topou

Condition: good (used), Year of construction: 1999, functionality: fully functional, Fanuc control, two turrets, sub-spindle, chip conveyor, bar feeder, immediately available. Cjdpfx Aeyg Hr Ejfpopu

Condition: not inspected (used), Year of construction: 2011, functionality: unexamined, Fanuc control, 6-position turret, Cjdpfx Afsyg Hn Hepjpu Chip conveyor, FMB loading magazine,

Condition: new, Year of construction: 2022, The technique is intended for concentration, calming the mind, and decision-making. Csdsyhahiopfx Afpepu Dimensions: Height 2.8 m, Diameter 1.6 m Made in Lithuania, "MITRONAS Engineering"

Condition: good (used), Year of construction: 2010, operating hours: 64,321 h, functionality: fully functional, machine/vehicle number: 2SAY0351, turning length: 350 mm, turning diameter: 114 mm, spindle speed (max.): 8,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, torque: 30 Nm, total height: 2,100 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 2,500 kg, turning diameter over bed slide: 325 mm, controller manufacturer: FANUC, controller model: SERIES 18i-TB, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, EMCO MAXXTURN 25 CNC Lathe - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 26 A - Bar capacity: 25.4 mm - Centre distance: 445 mm - Spindle distance: 485 mm The machine is equipped with a tailstock, a main spindle, and a 12-position tool turret. It has six driven tools and a Y-axis. Note: The tool holders shown in the photos are not included! Cpjdpsx Hwfqsfx Afpeu Important: The item must be collected on a binding date between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck.

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 123, spindle speed (min.): 200 rpm, spindle speed (max.): 10,000 rpm, total height: 2,200 mm, total length: 9,000 mm, total width: 1,500 mm, overall weight: 5,000 kg, controller manufacturer: FANUC, controller model: SERIES 32i-MODEL B, counter spindle speed (min.): 200 rpm, counter spindle speed (max.): 10,000 rpm, TSUGAMI B0266E-II CNC Automatic Lathe - Operating voltage: 200 V - Frequency: 50 Hz - Rated current: 21.4 A - Max. bar capacity: 26 mm - Max. machining length: 320 mm (synchronously driven guide bushing) - Without guide bushing: 50 mm - Max. drilling diameter: 12 mm - Max. tapping diameter: M10 - Deep hole drilling diameter: 10 mm - Max. clamping diameter sub-spindle: 26 mm - Max. drilling diameter sub-spindle: 10 mm Cedex Hxz Hepfx Afpspu - Max. tapping diameter sub-spindle: M10 - Max. drilling diameter tool spindle: 8 mm (front/rear tool holder) - Max. tapping diameter: M6 (front/rear tool holder) - Max. slot milling cutter diameter at tool spindle: 45 mm - Rotating guide bushing: 200 - 10,000 rpm (synchronously driven) - Tool spindle speed: 200 - 6,000 rpm - Total number of tools (standard specification): 31 - Tool size: 16 mm square x 100 mm - Rapid traverse: 32 m/min; rapid traverse in X1 and Y1: 24 m/min, in Y2: 24 m/min - Controllable axes: 6 The machine is equipped with a bar loader from FMB, type: TURBO 3-36, and a chip conveyor. Note: The item must be collected, by firm appointment, between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 22006A, spindle speed (max.): 10,000 rpm, spindle speed (min.): 200 rpm, overall weight: 5,000 kg, total width: 1,500 mm, total length: 9,000 mm, total height: 2,200 mm, controller manufacturer: FANUC, controller model: SERIES 32 i-MODEL B, counter spindle speed (min.): 200 rpm, counter spindle speed (max.): 10,000 rpm, TSUGAMI B0266E-II CNC Automatic Lathe - Operating voltage: 400 V - Rated current: 64 A - Frequency: 50 Hz - Max. bar capacity: 26 mm - Max. machining length: 320 mm (synchronously driven guide bushing) - Without guide bushing: 50 mm - Max. drilling diameter: 12 mm - Max. tapping diameter: M10 - Diameter for deep holes: 10 mm - Max. sub-spindle clamping diameter: 26 mm - Max. sub-spindle drilling diameter: 10 mm Cpedpsx Hwn Sofx Afpsu - Max. sub-spindle tapping diameter: M10 - Max. tool spindle drilling diameter: 8 mm (front/rear tool holder) - Max. tool spindle tapping diameter: M6 (front/rear tool holder) - Max. slot milling cutter diameter tool spindle: 45 mm - Rotating guide bushing: 200 - 10,000 rpm (synchronously driven) - Tool spindle speed: 200 - 6,000 rpm - Total number of tools (standard specification): 31 - Tool size: 16 mm square x 100 mm - Rapid traverse: 32 m/min, rapid traverse in X1 and Y1: 24 m/min, in Y2: 24 m/min - Controllable axes: 6 The machine is equipped with a bar feeder from FMB, model: TURBO 3-36, as well as a chip conveyor. Note: The item must be collected between March 4th and March 12th, 2026, on a date to be agreed upon. FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 505, spindle speed (max.): 10,000 rpm, spindle speed (min.): 200 rpm, total height: 2,400 mm, total length: 8,000 mm, total width: 1,500 mm, overall weight: 6,000 kg, controller manufacturer: FANUC, controller model: SERIES 31 i-MODEL A, counter spindle speed (min.): 200 rpm, counter spindle speed (max.): 10,000 rpm, TSUGAMI HS 207 CNC Automatic Lathe - Operating voltage: 380 V - Frequency: 50 Hz - Rated current: 41 A - Rated power: 14.3 kVA - Bar clamping diameter: from 3 to 20 mm Cpodpfx Ajx Hwlwjfpsu - Max. machining length: 210 mm (synchronously driven guide bushing) - Static guide bushing: 250 mm - Rotating guide bushing: 80 mm - Without guide bushing: 45 mm - Max. drilling diameter: 10 mm - Max. tapping diameter: M10 - Diameter of deep holes: 8 mm - Max. counter spindle clamping diameter: 20 mm - Max. counter spindle drilling diameter: 8 mm - Max. counter spindle tapping diameter: M6 - Max. tool spindle drilling diameter: 6 mm (front/rear tool holder, B-axis tool spindle) - Max. tool spindle tapping diameter: M5 (front/rear tool holder, B-axis tool spindle) - Max. tool spindle slot milling cutter diameter: 30 mm - Tool spindle speed: 200–8000 rpm - Total number of tools (standard specification): 35 - Tool dimensions: 12 x 12 x 100 mm - Rapid traverse: 32 m/min - Rapid traverse in X1 and Y1: 24 m/min, in Y2: 15 m/min - Controllable axes: 7 The machine is equipped with a bar feeder from manufacturer FMB, type: TURBO 3-36, as well as a chip conveyor and coolant system. Note: This item must be picked up definitively between 04 and 12 March 2026 on a date to be mutually agreed. FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), functionality: fully functional, machine/vehicle number: 14736259, spindle speed (max.): 6,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 200 mm, total height: 2,100 mm, total length: 1,800 mm, total width: 1,500 mm, overall weight: 2,000 kg, HYUNDAI HIT-8 S CNC lathe - Operating voltage: 380 V - Frequency: 50/60 Hz - Rated current: 24 A - Connection: 25.5 kVA Note: The item must be collected between 04 and 12 March 2026 on a specific date to be agreed upon in advance. FCA D-75181 Pforzheim – loaded onto truck Csdpfxex Hwhfs Afpopu

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 310163917, travel distance X-axis: 150 mm, travel distance Z-axis: 250 mm, total height: 2,200 mm, total length: 3,000 mm, total width: 2,000 mm, overall weight: 4,000 kg, controller manufacturer: MAZAK, controller model: MAZATROL 640 T, MAZAK SUPERQUICKTURN 100 M CNC Lathe Cpsdpfxox Hwguj Afpsu - Operating voltage: 200 V - Frequency: 50/60 Hz - Rated current: 89 A - Connection: 17.8 kVA The machine is equipped with a tailstock and a 12-position tool turret, including driven tool stations. Note: The item must be collected definitively between 04 and 12 March 2026 on a date yet to be agreed. FCA D-75181 Pforzheim – loaded onto truck