Used Lath Macgine for sale (5,422)

Condition: used, Year 1989 Center height on the bed: 225 - 250 mm Distance between centers: 1500 mm Maximum turning diameter in the gap: 660 - 710 mm Maximum turning diameter on the bed: 455 - 505 mm Maximum turning diameter on the carriage: 270 - 290 mm Fixed steady rest bore diameter: 200 mm Traveling steady rest bore diameter: 130 mm Bed width: 330 mm Gap width: 250 mm Gap width at the carriage: 160 mm Maximum spindle diameter: 140 mm Spindle bore: 105 mm Reduction sleeve for spindle / Morse taper: No. 5 Tailstock Morse taper: No. 5 Speeds and Feeds • Spindle speeds: No. 16 • Speed values: from 23 to 1000 rpm (or 35 to 1500 rpm). • Longitudinal feeds: 0.06 - 0.84 mm/rev. • Transverse feeds: 0.03 - 0.42 mm/rev. Threads • Metric pitches: 0.5 - 28 mm. • Module pitches: 0.25 - 14. Lrsdpfx Aoz Dwl Tjb Uet • Whitworth: 2 - 112 threads/inch. Motor • Standard power: 7.5 HP. Machine comes with operating and maintenance manual. All technical data provided is indicative and may be subject to change without prior notice; therefore, it should not be considered binding.

Condition: good (used), Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Lrodjz Er T Uopfx Ab Uet Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: defective spare-parts repository (used), Year of construction: 1990, functionality: not functional, turning length: 600 mm, turning diameter: 300 mm, travel distance X-axis: 175 mm, travel distance Z-axis: 670 mm, spindle motor power: 11 W, rotational speed (min.): 3,500 rpm, total length: 2,620 mm, total width: 1,480 mm, overall weight: 4,000 kg, bar passage: 65 mm, spindle nose: MT-NO.7, Equipment: documentation/manual, DAINICHI F25 CNC turning center, manufactured in Japan. A robust and reliable CNC lathe suitable for precision turning and general production applications. The machine features a rigid construction, hydraulic chucking, and automatic tool changing, making it suitable for both small and medium production runs. The machine is available for inspection and can be demonstrated upon request. TECHNICAL SPECIFICATIONS CNC control: FANUC CNC turning center Maximum turning diameter: approx. 300 mm Maximum turning length: approx. 600 mm Swing over bed: approx. 500 mm Spindle bore: approx. 65–77 mm* Spindle speed: up to approx. 3,000–3,500 rpm* Turret: automatic turret, 10 stations* Hydraulic chuck Hydraulic tailstock Coolant system Ledpfx Abszwdqro Uert Chip conveyor *Specifications to be confirmed according to the individual machine configuration. ADVANTAGES DAINICHI, Japanese machine construction Robust and rigid CNC turning center FANUC CNC control Hydraulic chuck and tailstock Suitable for general turning and production work Machine available for inspection Immediate availability < < < THE MACHINE HAS A FAULT ON THE REGULATOR AND IT IS NOT FUNCTIONAL. IT CAN BE REPAIRED OR USED FOR SPARE PARTS. > > > IT HAS AN ALMOST NEW 3-JAW CHUCK.

Condition: used, Year of construction: 1989, functionality: not functional, turning length: 600 mm, turning diameter: 350 mm, spindle bore: 105 mm, spindle motor power: 22 W, total length: 3,063 mm, total width: 1,660 mm, overall weight: 4,300 kg, Equipment: documentation/manual, The machine is not functioning due to a fault in the regulator. All the machine's mechanical properties are perfect. The machine is very rigid and can achieve tolerances as tight as 0.01 mm. It can also be used as spare parts. Ledpozwdamjfx Ab Uort

Condition: good (used), Year of construction: 1987, functionality: fully functional, overall weight: 1,650 kg, spindle mount: MK 6, L&Z Lathe Weiler Commodor B The machine has been cleaned and inspected by us. It runs smoothly; measured runout is < 0.01 mm. Lredpfxjz A Ah Rj Ab Uot Upon request, a coolant system and tool guard with a microswitch can be retrofitted. For sale only to businesses as defined in § 14 BGB. Technical data: Year of manufacture: 1987 Turning length: 1000 mm Turning diameter over bed: 380 mm Turning diameter over cross slide: 190 mm Spindle speed: 25 - 2000 rpm Spindle bore: Ø 56.0 mm / MK6 Tailstock quill: MK 4 Quill stroke: 150 mm Bed width: 310 mm Spindle mounting: DIN 55027 Size 6 Feeds - longitudinal: 0.022 - 0.8 mm/rev Feeds - transverse: 0.011 - 0.4 mm/rev Threads: M 0.3 - 10.0 mm Operating voltage: 380 V Total power consumption: 4 kW Weight approx. 1650 kg Accessories: • 3-axis digital display • Multifix quick-change tool holder B • 3-jaw chuck Forkardt 200 • 4-jaw chuck Röhm • Operating manual • Chip tray with integrated coolant pump for connecting a coolant system • Various accessories (set of soft jaws, turning tools, etc.)

Condition: used, Year of construction: 1999, operating hours: 36,151 h, functionality: fully functional, Disassembly, loading, and transport are the responsibility of the buyer. Ljdezzvxcopfx Ab Usrt Sale only within the EU.

Condition: good (used), Precision lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: OMAP, Lead screw and feed screw lathe type 180 Ljdpjz D Tt Hefx Ab Usrt -Turning length: 1600 mm -Turning diameter over bed: 410 mm -Turning diameter without bed: 570 mm -Turning diameter over support: 230 mm -Spindle bore: Ø 53 mm -Spindle speeds: 12 - 1650 rpm -Three-jaw chuck: Röhm Ø 250 mm -Tailstock mount: MK3 -Drive: 2.2 kW -Accessories included, see photos -Dimensions: 2670/900/H1355 mm -Weight: 1460 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Reference: LT-2512 Manufacturer: Okuma Model: LVT300-M Control Unit: Okuma OSP-P200L Year of Manufacture: 2007 Keyboard / Software Language: International / Spanish Country of Origin: Japan Technical Specifications Capacity Swing over bed: Ø 280 mm Swing over Z-axis carriage: Ø 280 mm Swing over X-axis carriage: Ø 280 mm Max. turning diameter x length: Ø 280 x 200 mm Main Spindle Spindle bearing diameter: Ø 100 mm Spindle nose type: JIS A2-6 Spindle bore diameter: Ø 62 mm Speed ranges: 2 ranges, infinitely variable Spindle speed: 40 – 4,000 rpm Spindle motor: 22/15 kW (20 min/continuous rating), VAC type X-Axis Travel: 210 mm + 845 mm (for workpiece loading) Cutting feedrate: 0.001 – 1,000.00 mm/rev Rapid traverse rate: 60,000 mm/min Z-Axis Travel: 360 mm Cutting feedrate: 0.001 – 1,000.00 mm/rev Rapid traverse rate: 30,000 mm/min Turret Type: VDI 40 Number of tool stations: 12 (L or M) Tool Dimensions O.D. turning shank size: 25 x 25 mm I.D. boring bar shank diameter: Ø 40 mm Live Tooling / Driven Tools Rotational speed: 45 – 4,500 rpm Speed ranges: 1 range, infinitely variable Drive motor: 3.7/2.2 kW (15 min/continuous rating) C-Axis Controlled indexing angle: 360° (0.001° minimum increment) Rapid traverse rate: 200 rpm Dimensions and Weight Machine height: 2,500 mm Floor space footprint: 1,320 x 2,800 mm Machine weight: 5,600 kg Included Options EWAB palletized conveyor system (pallets not included) Lodpfxsy Smz Eo Ab Uort MAYFRAN chip conveyor FORKARDT 3QLC 200-54 hydraulic chuck (3-jaw / 210 mm) Tool presetter (TOUCH SETTER) TOOL LIFE MANAGEMENT function Rigid tapping DNC-T1

Condition: used, functionality: fully functional, We are selling this machine. It is connected and can be tested. A video of the machine can be sent via the WhatsApp application. Documentation for the machine is available. Speeds: 1st range: 0.35-3.5 rpm 2nd range: 1.4-14 rpm Drive: 2 regulating motors, each with 120 kW, powered by a 240 kW Ward-Leonard converter. Diameter of the clamping plate: 8,000 mm Largest turning diameter: 12,500 mm Turning height: 2,200 mm The machine underwent a major overhaul and modernization in 1991. Maximum workpiece weight: 200,000 kg Machine weight: 550,000 kg Please submit your offer. Ljdpfxjydqfds Ab Ujrt

Condition: ready for operation (used), Year of construction: 2012, spindle bore: 75 mm, spindle speed (max.): 2,400 rpm, rotational speed (max.): 2,400 rpm, quill diameter: 75 mm, Fanuc OITD Capacity: 1750 x 560 mm Diameter: 390 mm on carriage 12-position turret Lrodszzdtuepfx Ab Uet Tool guards Set of VDI tool holders

Condition: excellent (used), Year of construction: 1959, Schaublin 102 VM In very good condition. Lsdpozp Uz Ssfx Ab Uert Includes accessories as shown in the pictures. Transportation can be arranged.

Condition: excellent (used), Year of construction: 2019, HAAS ST-30 – 2019 – BMT65 / driven tools / C-axis / only 1385 cutting hours For sale: HAAS ST-30 CNC turning center, manufactured in 2019. The machine is in very good technical and visual condition, with very low operating hours – only 1385 hours of actual cutting time. A rich configuration including a BMT65 tool turret, driven tools, and a C-axis allows for not only turning operations but also milling, drilling, and threading without the need to transfer the workpiece to another machine. Lodpfx Aboz D E Ayo Uort TECHNICAL DATA * Manufacturer: HAAS Automation * Model: ST-30 * Year of manufacture: 2019 * Date of manufacture: 07/2019 * Control: HAAS CNC * Chuck: 254 mm / 10” * Spindle nose: A2-6 * Maximum spindle speed: 3400 rpm * Spindle power: 22.4 kW / 30 HP * Maximum torque: 407 Nm at 500 rpm * Maximum bar diameter: 76 mm * Spindle bore diameter: 88.9 mm * Tool turret: BMT65 * Driven tools * C-axis * Hydraulic tailstock * Machine without Y-axis WORKING RANGE * X-axis travel: 324 mm * Z-axis travel: 660 mm * Maximum workpiece diameter above frontrest: 806 mm * Maximum machining diameter with BMT65 turret: 457 mm * Maximum machining length: 660 mm * Maximum bar diameter: 76 mm * Distance between centers: approx. 762 mm EQUIPMENT * BMT65 turret * Driven tools * C-axis * Tool probe * Hydraulic tailstock * High-pressure coolant system * Through-tool coolant * Belt chip conveyor * Mist collector/filtration system * Rigid tapping * Spindle orientation M19 * VPS – Visual Programming System * Wireless network * 1 GB memory * Compensation tables MACHINE HOURS Data read directly from the control: * Power-on time: 13,052 h * Cycle time: 1,764 h * Actual cutting time: only 1,385 h Please send a specific price offer.

Condition: good (used), Year of construction: 2010, CNC lathe, Haas brand, GT-10 model, year 2010. Ledpfx Aboz D D I Uo Uort

Year of construction: 1972, condition: good (used), KZTS 1836A-14 Railway Wheelset Lathe Year: 1972 Max. wheel diameter: approx. 1,140 mm Wheel diameter at rolling circle: 840 - 1,075 mm Max. axle length: approx. 2,600 mm Centre height: approx. 630 mm Speed range: 4 - 31.5 rpm Main motor: 55 kW Dimensions: approx. 7,250 × 4,380 × 1,890 mm Weight: approx. 39,500 kg Heavy-duty railway wheelset lathe for machining and reprofiling complete railway wheelsets. Lodpfxjz A Ap Ue Ab Uert For more details, please contact us.

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 845000756E, turning diameter: 400 mm, spindle bore: 103 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 265 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,050 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,400 mm, total length: 6,000 mm, total width: 2,400 mm, overall weight: 8,000 kg, bar passage: 90 mm, center height: 360 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, nominal power (apparent): 50 kVA, operating hours of spindle: 4,617 h, Equipment: documentation/manual, DMG MORI ECOTURN 510 CNC lathe - Chuck diameter: 250 mm - Diameter in the front bearing: 140 mm - Feed drive in the X and Z axes: 40 x 10 mm - Feed forces X/Z: 7.5 kN - Y-axis feed force: 7000 N - Rapid traverse C1 axis: 100 m/min - Travel measuring system X/Y/Z: absolute rotary - Positioning uncertainty X: 0.008 mm, Z: 0.010 mm - Working area, distance between centers: 1150 mm - Max. swivel range above the bed: 680 mm - Swivel range above the X slide: 465 mm Lrsdpfx Abjzxzc Ij Uet - Travel of the Y-axis: 120 mm (+/- 60 mm) The machine is equipped with a tailstock and a 12-position tool turret, including the tool holders located in the turret, as well as a three-jaw chuck SMW AUTOBLOK, diameter: 300 mm, including a chip conveyor, filter extraction, and documentation. FCA D-73529 Schwäbisch Gmünd - to be loaded onto a truck.

Condition: like new (used), functionality: fully functional, Weiler Primus Lead and Pull Spindle Bench Lathe – Like New Condition!!! Technical Data: >> Year of manufacture approx. 1990, machine no. 4472 >> Center height 120 mm >> Distance between centers 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle bore 23 mm >> Short taper spindle head DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: Metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 three-jaw chuck, 125 mm, like new, with 2 sets of jaws >> Collet chuck with collets from 2 mm to 12 mm, increasing in 1 mm increments >> Mulifix size A with 3 steel holders >> Change gears Lrsdpfez A Tgqjx Ab Ujt >> Fixed steady rest >> Faceplate >> Spindle guard >> Operating manual, electrical diagrams, and much more About the machine: A Weiler Primus Lead and Pull Spindle Bench Lathe with a workbench is offered in like-new condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This Primus model comes from the German Armed Forces, where it was used very little (almost new). This newer generation of Weiler lathes is very user-friendly and can produce surfaces that are as smooth as if they were ground. Take advantage of the opportunity to inspect this machine on-site and under power to convince yourself of its condition. Digital display available for an extra charge.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, rotational speed (max.): 3,150 rpm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold with collets, tool holders, and additional accessories! For more Schütte multi-spindle machines from the same location, see below! TECHNICAL DETAILS Maximum bar capacity: 32 mm Maximum bar feed: 125 mm Maximum turning length: 80 mm Maximum drilling depth: 80 mm Spindle speed for turning: 200–3,150 rpm Spindle speed for right-hand thread cutting: 11.2–1,575 rpm MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Dimensions & Weight Required space: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Frequency: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides Lrsdez Agz Dspfx Ab Uot 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Tool holders Additional accessories

Condition: ready for operation (used), Year of construction: 2012, operating hours: 20,000 h, functionality: fully functional, machine/vehicle number: 274 F, turning diameter over cross slide: 65 mm, turning length: 223 mm, turning diameter: 160 mm, spindle bore: 100 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 3,000 rpm, travel distance X-axis: 115 mm, travel distance Y-axis: 69 mm, travel distance Z-axis: 230 mm, spindle motor power: 17,000 W, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, rotational speed (min.): 60 rpm, Equipment: documentation/manual, Multi-turret automatic lathe with numerical control (CNC), counter-spindle (sub-spindle), and motorized turret: CNC automatic lathe MUPEM WIN 6500, designed for precision machining in large series from bar stock. Robust multi-turret machine construction, equipped with a main spindle, counter-spindle (sub-spindle) with a synchronous drive device (pick-up), motorized turret, and independent front and rear transverse/vertical carriages, enabling simultaneous operations and highly efficient machining cycles. CNC control with color touchscreen (MUPEM interface), providing real-time display of the spindle, sub-spindle, turret, carriage positions (Z turret, Longitudinal, Front, Rear, Vertical 1, and 2), chuck, pick-off, and auxiliary outputs. Complete manual control panel: manual/automatic mode, speed selector (slow/medium/fast), increments (small/medium/large), feed potentiometers, and spindle speed percentage, emergency stop button, and locking key. Equipped with a bar feed system (Hydrobar LNS type loader, visible in the images), chip conveyor (Auxkal), and coolant system. Main technical features Headstock Maximum bar capacity with chuck: 65 mm Maximum chuck diameter: 160 mm Front spindle bearing diameter: 100 mm Main spindle Power: 17 kW (variable AC) Speed range: 60–3,000 rpm Turret 8 stations (1" hole), optional 6 stations (1 1/4") Maximum working travel: 230 mm Maximum feed force: 12,000 N Rapid traverse rate: 15 m/min Indexing time: 0.3 s Motorized turret 6/8 stations, 6/4 driven tools Tool holder shank diameter: 1 1/4" Maximum drill diameter: 16 mm / tap: 12 mm Motor power: 2 kW — max. 3,000 rpm Synchronous turret drive (Pick-up) Maximum clamping diameter: 32 mm Power: 2 kW — max. 3,000 rpm Transverse carriages Maximum travel: 69 mm Maximum feed force: 12,000 N Maximum longitudinal travel (6-axis version): 115 mm Vertical carriages Maximum travel: 69 mm Ledpfxezk D Sij Ab Uert Longitudinal adjustment: 50 mm Maximum feed force: 12,000 N Hydraulic system Pressure: 70 bar Tank capacity: 75 l Coolant system Flow rate: 30 l/min Pressure: 1.5 bar Capacity: 80 l Dimensions and weight Height from floor to spindle center: 1,135 mm Required area (approx.): 2,600 x 1,660 mm Overall height: 1,700 mm Approximate weight: 3,000 kg Included equipment Hydrobar type bar loader/feeder (LNS) Auxkal chip conveyor Coolant system Motorized turret with various clamping tools MUPEM CNC control with touchscreen

Condition: good (used), Year of construction: 2012, 370mm max. machining diameter, 651mm swing over bed, 461mm swing over cross-slide, 712mm max turned length, Ljdsz D Ayvspfx Ab Uort 3500rpm spindle, 76mm bar capacity, 12 station turret, 15kW spindle motor, FANUC Oi control, 3 jaw chuck , C axis & Milling, Tool presetter, Tailstock, coolant, swarf conveyor.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Traub CNC turning machine TNA480, TX8D, year of manufacture 1990, serial number 607. Servo C-axis, reinforced rotary tool drive, 1 turret VDI40, tailstock, chip conveyor, 3-jaw chuck KNCS315, ID090090. Main drive with 2 gear stages. A8 spindle with hollow clamping cylinder Röhm SZS 86/169, ID 416530. Lodoz Eqh Dspfx Ab Usrt Additional accessories, tool holders, chucks available upon request. Includes ATC optics, spare parts catalog, wiring diagram, tool holder catalog. Very good condition, operational, can be inspected while running. Machine geometry has been checked and corrected/adjusted, and a test run has been performed. Scraper + belt + drive sprocket, belt checked and replaced, maintenance performed at 4000 hours. Technically very good condition, guideways, spindle bearings in very good condition. Videos available upon request.

Condition: ready for operation (used), Year of construction: 2003, turning diameter over cross slide: 200 mm, turning length: 750 mm, turning diameter: 360 mm, spindle bore: 54 mm, spindle speed (max.): 3,000 rpm, rotational speed (max.): 3,000 rpm, overall weight: 1,600 kg, Order number Lrodpjx H R Ulofx Ab Uot Spindle bore 54 mm, maximum speed 3000 rpm Capacity 750x360 mm 200 mm on the carriage Multifix turret type B

Condition: like new (used), Year of construction: 2021, functionality: fully functional, spindle bore: 40 mm, turning diameter over bed slide: 330 mm, center width: 635 mm, spindle speed (max.): 2,500 rpm, overall weight: 700 kg, TECHNICAL DETAILS Center distance: 635 mm Swinging diameter over bed: 330 mm Lodpfozz Rm Iox Ab Ujrt Swinging diameter over cross slide: 210 mm Swinging diameter in the gap: 480 mm Toolmaker's accuracy: DIN 8605 Main spindle bore: 40 mm Spindle mount: DIN 55029 D1-4 Speed steps: 12 Speed range: 40–2,500 rpm Taper in tailstock: MK 3 Tailstock quill travel: 110 mm Longitudinal feeds: 0.03–2 mm/rev Cross feeds: 0.015–1 mm/rev Metric threads: 0.2–14 mm Whitworth threads: 2–56 threads per 1" MACHINE DETAILS Drive power: 2.2 kW Dimensions & Weight Dimensions (L × W × H): 1,700 × 1,000 × 1,400 mm Weight approx.: 700 kg EQUIPMENT 2-axis digital read-out ACU-RITE® DRO 203 Quick-change tool holder MULTIFIX Chip collection tray with front opening flap Adjustable tool holder guard Rear splash and chip guard Chuck guard Spindle cover Removable bridge Coolant system Work area lighting Threading dial Foot brake with brake pedal over the entire length Operating manual with CE declaration of conformity

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, total height: 2,300 mm, total length: 4,800 mm, total width: 2,550 mm, feed length X-axis: 280 mm, feed length Y-axis: 100 mm, feed length Z-axis: 900 mm, overall weight: 8,500 kg, The machine comes from a well-maintained company. Control system: 840D. Accessories as shown in the pictures. Lrjdoz Dw Dpepfx Ab Ujt

Condition: excellent (used), Schaublin 102N – Precision Lathe For sale is a Schaublin 102N precision lathe, a high-quality Swiss machine tool known for its accuracy and robust design. This machine is particularly suitable for precise turning operations, small-series production, model making, tool making, and general precision engineering. Technical Data Manufacturer: Schaublin, Switzerland Model: 102N Lrjdez Eqgmepfx Ab Uot Machine Type: Precision Lathe Design: Lead and feed screw lathe Center Height: approx. 102 mm Center Distance: depends on the model Spindle Mount: Schaublin-specific design Spindle Bore: depends on the installed spindle Speed Range: depends on the motor and belt configuration Drive: Electric motor Rotation Direction: Right/Left, if equipped accordingly Mounting: Workbench/subframe mounting Accessories: - Collet chuck system including a set of collets The machine is in very good condition and operates perfectly.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, L & Z Lathe WEILER CONDOR B incl. three-axis digital display -CE marking -Machine from an educational institution / very well maintained -Center height 165mm -Swinging diameter over bed 330mm -Swinging diameter over cross slide 185mm -Turning length 800mm -Spindle speeds 22 - 2800 rpm -Automatic / longitudinal and cross feeds -Threading / metric / inch, etc. -Bar capacity 40mm -Tailstock / Morse taper MT3 -Multifix base and inserts -Three-jaw chuck 200mm -Electric chuck guard -Spindle cover -2x Emergency stop -Coolant system -Chip guard -Documentation Dimensions: L x W x H 1.8 x 0.8 x 1.6 meters / Weight 1200 kg Ljdpfszvx A Tsx Ab Uert Errors and omissions excepted.