Used Lathe Chuck for sale (7,308)

Condition: used, Broadbent - Schofield Gap Bed Centre Lathe. Distance Between Centres Approx 5M (16ft). Swing Over Bed 35". Swing in Gap 55". Spindle Bore 4 1/2". Spindle Speeds 7 - 500rpm. Leadscrew 2 TPI. Taper Turning Attachment. Bison 800mm Diameter 4 Jaw Chuck. Fixed 3 Point Roller Bearing Steady. Digital Readout & Tooling & 2 Rear Splash Guards. Codpfszy Ipqsx Apterg

Condition: used, Binns & Berry Trident E1000 Double Gap Bed Centre Lathe With Digital Readout System. Distance Between Centres 4500mm Swing Over Bed 1000mm. Swing in Gap 1500mm. Width of Gap 350mm. Spindle Bore 100mm. Spindle Speeds 4 - 1250rpm. Leadscrew 2 TPI. Dual Dials. Crjdszy Il Espfx Aptjg Power to Saddle & Cross Slide. Bison 625mm Diameter 4 Jaw Chuck. Fixed 3 Point Roller Bearing Steady. Weight Approx: 9000KG

Condition: used, functionality: fully functional, spindle bore: 82 mm, turning diameter: 630 mm, turning length: 1,250 mm, total length: 3,420 mm, total width: 1,750 mm, total height: 1,400 mm, type of input current: three-phase, overall weight: 5,200 kg, workpiece weight (max.): 6,000 kg, spindle mount: MK 6, Hello, We are offering a robust, well-maintained SUS 63/1250 lathe. All components are original, and it is in 100% working condition. The lathe was used sporadically in our workshop. It is in continuous operation, connected, and can be inspected. Manufacturer: TOS Turning length: 1250 mm Turning diameter (max.): 655 mm Turning diameter on the cross slide (max.): 390 mm Taper: Morse 6 Weight: 5.2 t Main motor: 22 kW (option to install a lower-power motor) Length/width/height: 3420/1750/1400 mm Load capacity: 6 t Spindle bore: 82 mm Rapid feeds Included: - 400 mm self-centering chuck - additional set of jaws - rotary steady rest - set of wrenches Crodpfszxn R Esx Aptog - chip/coolant tray - coolant pump - lamp - Technical documentation in Polish + mechanical and electrical diagrams We recently replaced the hydraulic oil with new oil.

Condition: good (used), Year of construction: 2010, functionality: fully functional, Technical specifications of the DOOSAN LYNX 220A metal lathe swing over bed: 510 mm Cjdjzx S A Espfx Aptjrg maximum turning diameter: 320 mm recommended turning diameter: 170 mm maximum turning length: 322 mm bar diameter: 45 mm X-axis travel: 175 (160+15) mm Z-axis travel: 160 mm rapid traverse rate in X/Z axis: 30/36 m/min spindle speed: 6000 rpm spindle bore diameter: 53 mm spindle bearing diameter: 90 mm spindle nose: A2-5 spindle drive power (30 min/continuous power): 15/11 kW chuck diameter: 6″ tool diameter: 25×25 mm boring bar diameter: 40 mm tailstock quill diameter: 65 mm tailstock quill stroke: 80 mm tailstock quill taper: MT4 X,Z axis drive power: 1.8 kW coolant pump motor power: 0.18 kW rated power: 23.68 kVA power interruption resistance: 17 kA full load current: 62.15 A short-circuit resistance: 65 kA power supply: 3x 200/220 VAC; 50/60 Hz dimensions (L x W x H): 2325 x 1600 x 1600 mm weight of DOOSAN LYNX 220 A machine: 2900 kg Equipment of the DOOSAN CNC lathe CNC control unit: DOOSAN FANUC i Series 12-position turret tailstock lubrication system cooling system foot switch control hydraulic unit tightly sealed work area enclosure with a lock for the front door work area lighting

Condition: good (used), Year of construction: 2013, functionality: fully functional, The FAMAR TANDEM 400 is a powerful CNC vertical lathe with two independent machining stations. The machine is equipped with driven tools, automatic workpiece loading and unloading, a measuring probe, high-pressure coolant, and coolant filtration. The tandem design enables efficient series production and the simultaneous use of two separate machining stations. Main technical parameters: Standard chuck diameter: 400 mm Maximum chuck diameter: 400 mm Nominal turning diameter: 300 mm Maximum turning diameter: 400 mm Maximum turning length: 480 mm Maximum turning length: 300 mm Number of main spindles: 2 Max. main spindle speed: 4,000 rpm Rated power of main electric spindle: 49.6 kW Rated torque: 458 Nm Cjdpfxszyp Afj Aptorg S6 40% power: 61.7 kW S6 40% torque: 724 Nm Machine dimensions: approx. 3,900 × 3,500 × 3,200 mm Machine weight: approx. 21,000 kg Electrical connection: 400 V / 50 Hz Installed power: 90 kW CE compliant Tooling equipment UTTUM50 – turret for driven tools, size 50 Max. driven tool speed: 8,000 rpm Torque: 100 Nm Power: 15.6 kW UTDUM50 – turret tool disk Size VDI 50 12 tool positions Direct tool drive PPP40 – preparation for 2 hydraulic circuits For special workpiece clamping Piping and valves Control via M-functions Automation TRPAPE20 – 1 automatic circulating pallet conveyor for loading and unloading workpieces A single conveyor system for both workpiece infeed and outfeed Circulating pallet magazine Belt design Pallet occupancy monitoring system Pallet sorting system Working height approx. 950 mm Automatic workpiece loading and unloading via the machine TRPNVBPTE4 – Shuttle system with rotary station Loading/unloading shuttle system Integrated rotary station Including 1 set of jaws for the workpiece AZGRRB500 – set of jaws for Shuttle rotary station MPDM2 – automatic measuring probe Automatic workpiece measurement Coolant, filtration, and chip removal LBCVTT50 – belt conveyor for chips Separate conveyor for chip removal Particularly suitable for short chips, such as cast iron, brass, and some aluminum alloys LBVA760 – coolant tank Volume 760 l LBAP10 – high-pressure pump Pressure 20 bar Internal tool cooling LBFTC – paper filter for coolant Suitable for cast iron and aluminum Filtration of particles approx. 0.08 mm Flow rate max. 60 l/min LBFTTDF – double switchable filter Filtration of particles approx. 0.1 mm Bypass system allowing filter cartridge replacement AZPL – air workpiece position control Additional equipment: CNC control Siemens 840D sl 2 main spindles Driven tools C-axis 12-position turret VDI 50 1 automatic workpiece pallet conveyor Shuttle system with rotary station Automatic measuring probe Separate belt conveyor for chips High-pressure cooling 20 bar Coolant filtration Hydraulic clamping circuits Central lubrication Complete safety guarding CE The machine is particularly suitable for automated series production of rotational parts, where the two independent machining stations, driven tools, and automatic workpiece handling can be utilized.

Condition: good (used), For sale is the lathe shown in the pictures, manufactured by the Chinese company Sumore, model SP2114. I rate the condition of the machine as very good. It has high rigidity and accuracy. The machine is connected and ready for operation. We provide on-site machine loading. Spindle bore: 58 mm Lathe chuck: 250 mm Turning length: 1500 mm Crodpfx Apezqt Dzeteg Turning diameter over the bed: 460 mm Turning diameter over the carriage: 260 mm Tailstock spindle: MK 4 Minimum speed: 25 rpm Maximum speed: 2000 rpm 12 spindle speeds Steady rest: fixed and traveling

Condition: good (used), functionality: fully functional, Internal article number: 26059 Crsdpozx Tt Sofx Aptog Mechanic's lathe Weiler Including an extensive accessory package + Four-jaw chuck Röhm 140 + Three-jaw chuck Röhm 140 + Collets "large" + Draw tube for tailstock (suitable for collet set "large") + Collet set "small" and draw tube for tailstock + Turret head + Parting tool support + Hand lever support with Multifix "A" base (installed) Speed adjustable via belt 2 speed stages Left-hand/right-hand rotation Dimensions (L x W x H): 120 x 50 x 125 cm Weight: 500 kg The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is running on our heated storage area of over 500 m².

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter: 1,800 mm, turning length: 600 mm, spindle bore: 130 mm, spindle speed (max.): 400 rpm, controller model: Siemens 840D Powerline, TECHNICAL DETAILS Credpfxszv Rlgj Apteg Turning diameter: 1,800 mm Turning length: 600 mm Spindle bore: 130 mm Spindle nose: DIN 55027, size 11 Speed range: 1–400 rpm MACHINE DETAILS Control system: Siemens 840D Powerline Total power requirement: 38 / 52 kW Dimensions & Weight Machine weight: approx. 25 t Transport width: 3,700 mm EQUIPMENT 6-jaw chuck

Condition: used, Year of construction: 2015, functionality: fully functional, turning length: 1,275 mm, turning diameter: 481 mm, spindle bore: 102 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, 2-axis CNC lathe Doosan Puma 2600LB Year of manufacture: 2015 Siemens 828D control system with Shop Turn interface Axis travel: X - 260 mm Z - 1350 mm Max. turning diameter: 481 mm Max. turning length: 1275 mm 12-inch (315 mm) chuck with a large spindle bore of 102 mm 12-tool turret Tailstock Very good machine condition Included with the machine: - Documentation Crjdjzxz I Ropfx Aptsg - LNS chip conveyor

Condition: ready for operation (used), Year of construction: 2019, operating hours: 12,568 h, functionality: fully functional, 4-axis Lathe – Universal | Brand: DMG MORI | Type: CTX alpha 500 V4 Year of manufacture: 2019 (Start-up: July 2029) (Version with Y-axis and driven tools) The machine can be inspected by appointment under power. Condition: Fully functional / ready for operation. Operating hours (week 34/2026): - Total operating hours: 12.641 h - Spindle hours: 2.605 h TECHNICAL SPECIFICATIONS / EQUIPMENT: - Turning diameter: 165 mm - Turning length: 500 mm - Main spindle as an integrated spindle motor, ISM 52 Synchro * Drive power (100/40% duty cycle): 13/14 kW * Speed range: 20 - 6.000 rpm - Partial hollow chuck (hydraulic) * Pull-tube internal diameter: 52 mm - C-axis and spindle brake (hydraulic) - Y-axis for cross slide: +/- 40 mm, stroke: 80 mm - Tool turret: 12-position, brand: Sauter * Tool holder: VDI 30 mount, DIN 69880-30 * Driven tools * Connection/drive to DIN 5480 - Direct measuring system on the X-axis - Tailstock - CNC control: Siemens SINUMERIK 840D sl Operate * User interface: CELOS / ERGOline * Programming: ShopTurn 3G - Hollow spindle stop, adjustable, mounted at the rear on a hollow chucking device, Ø 66 mm (chuck-independent) * Belt filter system, filter fineness 40 µm * Level monitoring - Mechanical oil mist separator - Special version, operating mode BA4 “emery operation” - Coolant spray gun - Chip conveyor (hinged belt), incl. coolant tank and coolant pump, - Coolant system: 8 / 20 bar, Crsdozvz Aispfx Apteg * Coolant tank: approx. 600 l (selectable via M-function, with supply through the turret disc to the turret stations) - DMG MORI NETSERVICE - DMG MORI IoTconnector (enables DMG MORI’s online services) - DMG MORI Service Agent (controlled machine maintenance and servicing) - Bar machining package D65, consisting of: * D66 hydraulic hollow-bar clamping device * Workpiece retrieval device, with conveyor belt, conveying to the left for parts up to max. D65 x 185 mm in length, max. workpiece weight 3 kg - Documentation - CE marking Machine dimensions (L x W x H): approx. 3.843 x 2.580 x 1.825 (Height including attachment: approx. 2.415 mm) Available as an option: Milling attachments, - Collet chucks, - Jaw chucks, - Tools No guarantee is given as to the completeness or accuracy of the technical specifications or the equipment. - Subject to prior sale -

Condition: good (used), For sale is the lathe shown in the pictures, manufactured by the Japanese brand Mazak, model Quick Turn 8n, with Mazatrol T32-2 control. The machine is equipped with a bar feeder and a collet chuck. We can arrange for machine loading at the location. Net price: 23,000 (plus 23% VAT) Credpozc Ri Tsfx Aptjg Turning diameter: 160 mm Maximum turning length: 285 mm Spindle bore: 40 mm Maximum spindle speed: 6000 rpm 8-position turret Tailstock included Tool measuring probe Weight: 2700 kg

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, woodturning lathe with milling unit, PLC-controlled. A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling. The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling. Several programs for turning and milling operations can be stored. Hydraulic copying of a pattern or template. The roughing and copying tools are equipped with fine adjustments. Template adjustment is possible from the front and rear via fine-pitch spindles. The copying length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed stages adjustable via V-belt, within each stage, operation can be continuously adjusted via a frequency inverter. Speed stage 1: 200 - 2000 rpm Speed stage 2: 350 - 3400 rpm Distance between centers approx. 1550mm Copying length with steady rest approx. 1350mm Bed length approx. 2100mm Feed adjustable continuously, rapid traverse with safety end stop. Hydraulic copying slide with V-turning tool. Spindle with M33 thread and MK3 internal taper. Tailstock MK3 and with quick-release mechanism. Extensive accessories: Ring steady rest with front turning tool and insert guide. Four-jaw steady rest. Four-jaw chuck 125mm. Copying tools, center points, hexagonal drive, etc. Milling unit with 3kW motor for mounting on the copying slide. 5 milling heads available, only the 16mm collet is missing. CE marking Operating manual V-belt new Original paint, only a few spots have been touched up. Very good condition, from a small carpentry workshop. The machine was apparently not used to produce large quantities. Dimensions approx. 2600 x 1300 x 1300mm (L x W x H). Weight approx. 800kg. Cjdpfxozfwm No Aptorg The machine can be demonstrated on-site upon prior appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider."

Condition: good (used), Lathe Angelini MAS 160 (similar to Weiler Primus) Spindle speeds: 45-2840 rpm Three-jaw chuck: 140 mm Spindle bore approx. 35 mm Tailstock MK3 Crjdpfoy Ryrhjx Aptjg Distance between centers: 500 mm Center height approx. 140 mm Coolant system 2 tool holders and various accessories (blue box) The machine has been inspected and runs perfectly

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 178501, turning length: 1,000 mm, travel distance X-axis: 280 mm, travel distance Z-axis: 700 mm, total height: 2,000 mm, total length: 5,000 mm, total width: 2,200 mm, overall weight: 5,000 kg, controller manufacturer: OKUMA, controller model: OSP-P 300 L, input voltage: 400 V, input frequency: 50 Hz, input current: 154 A, nominal power (apparent): 29 kVA, Equipment: chip conveyor, OKUMA LB 3000 EX 2 - M C 1000 CNC lathe - includes driven tool stations and a C-axis Codpfx Apjzxyd Djtsrg The machine is equipped with a tailstock, a 12-position tool turret, and a three-jaw chuck, diameter: 250 mm, manufacturer KITAGAWA, including a chip conveyor. FCA D-63843 Niedernberg

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: ML0271-000198, spindle speed (max.): 6,000 rpm, spindle motor power: 15 W, total height: 1,600 mm, total length: 2,325 mm, total width: 1,600 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, type of input current: three-phase, bar passage: 65 mm, Equipment: documentation/manual, We are offering for sale a DOOSAN LYNX 220LSYC CNC lathe with a tailstock, in good condition, manufactured in 2015. It operated for 2 years in medium-volume series production, and since then, it has been used to produce smaller series and custom parts. The machine is equipped with a chip conveyor, tool measuring device, a chuck with collet mounting, and a 3-jaw hydraulic chuck. It has powered tool holders (3 pieces). It includes an LNS bar feeder, capable of handling bars up to 3 meters in length (included in the price). Crsdpoy Uwgqofx Apteg Other features include: workpiece ejector, workpiece catching and delivery system, tool load monitoring, and an oil separator, which extends the coolant's lifespan. It also has a highly rigid cast iron machine bed and a turret with 12 tool positions (24 positions). The dimensions refer only to the lathe itself. Weight: 2900 kg (the weight of the bar feeder is separate). Net price. If you have any questions or require further information, please send us a message.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, turning length: 1,040 mm, turning diameter: 580 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 1,040 mm, TECHNICAL DETAILS Turning diameter: 580 mm Turning length: 1,040 mm Spindle speed: 3,500 rpm Travel range X-axis: 2,500 mm Travel range Z-axis: 1,040 mm Tailstock diameter: 85 mm MACHINE DETAILS CNC control: Fanuc 18T-C Codpfezu Rzrsx Apterg Dimensions & Weight Dimensions (L × W × H): 4,650 × 2,320 × 2,060 mm Machine weight approx.: 7,200 kg EQUIPMENT VDI turret with 12 driven tool stations Chip conveyor Machine without tailstock Foot switch Chuck Turning chuck

Condition: excellent (used), For sale: ZMM C8C lathe as shown in the photos, marketed under the Huvema brand for the Dutch market. The machine comes from a school workshop where it has been in operation since its production. The condition of the machine is very good. On-site loading of the machine is provided. Turning trials were performed using a VCGT insert with a radius of 0.2. Csdpfxoy Rq Uts Apterg 160 mm Bison chuck with split jaws Turning length: 750 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Tailstock taper: MK3 Spindle speeds: 85–2000 RPM 12 spindle speed steps

Condition: good (used), Year of construction: 1965, LZ lathe, manufactured by HEID, type VK56, year of manufacture 1965. Maximum distance between centers: 550 mm Codozw E Ifepfx Aptjrg Distance between centers: 1000 mm Spindle speeds: 7-710 rpm / Spindle motor approx. 15 kW / Spindle brake. Four-jaw chuck, diameter 800 mm, Röhm. Rapid traverse in longitudinal and cross directions. Coolant system, various accessories. Shipping weight (total): approx. 7000 kg.

Condition: used, Year of construction: 2022, Technical details: turning diameter: 336 mm turning length: 216 mm weight of the machine ca.: 8,3 t Article: CNC multi-axis lathe Manufacturer: Hurco Model: TMX 8MYSi Year of manufacture: 2022 CNC multi-axis lathe Excerpt from manufacturer’s specifications: Working area: Max. turning diameter: 336 mm Max. swing diameter: 560 mm Main spindle specifications: Max. speed: 4,500 rpm Chuck diameter: 210 mm Tie-bar diameter: 64.5 mm Counter-spindle specifications: Max. speed: 6,000 rpm Tool turret with driven tools Bar-Loading Magazine: SAMSYS M3000 (2022 model) HYDAC Cooler The machine can be visited under power. The tool configuration included in the scope of delivery may differ from the images Crjdpfx Apozv Rgwotjg Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Lead and feed spindle lathe, manufacturer Böhringer, type D480, with: three-jaw chuck tailstock Multifix tool holder machine light and splash guard Lynette rotating center electric feed Emergency stop, CE compliant, retrofitted. Credszvyiuopfx Apteg Motor power 11 kW Operating voltage 400 V, 50 Hz, 3/N/PE Control voltage 230 V AC, 24 V DC Control cabinet Rittal, protection class IP65.

Condition: used, Year of construction: 2008, Chevalier FLC-2540 CNC Lathe CNC Lathe Chevalier Type/Model FCL-2540 Condition Used Year of Manufacture 2008 Technical Data Cjdpfxszx Up Ue Aptorg Capacity Diameter over bed: Ø 630 mm Diameter over cross slide: Ø 400 mm Max. turning diameter: Ø 630 mm Distance between centers: 1,000 mm Spindle Spindle speed: 37 - 2,250 rpm (D1-8), optional 80 - 1,500 rpm / 10 - 800 rpm (A2-11) Spindle nose type: D1 - 8, optional A2 - 11 Spindle taper: 1/16, optional 1/20 Travel distances X-axis: 280 mm Z-axis: 850 mm Feed rate: 5,000 mm/min X-axis rapid traverse: 5,000 mm/min Z-axis rapid traverse: 8,000 mm/min X-axis spindle diameter: Ø 25 mm / 5 mm Z-axis spindle diameter: Ø 40 mm / 10 mm Tool turret Manual tool turret: 4-position Max. tool shank size: 25 mm Diameter: Ø 75 mm Tailstock Travel: 190 mm Taper: MK5 Motor Spindle motor: 15.5 kW Feed motor (X/Z): 1.4 kW Dimensions (L x W x H): 2,840 x 1,905 x 2,235 mm Net weight approx.: 3,350 kg Features: - Software: Siemens ShopTurn Accessories - 7 x Multifix C40/170 - 7 x Multifix C32/150 - Chuck Schunk Rota-S 319-92 - Chuck Schunk Rota-S 160-42 - Measuring probe - Steady rest - Drill chuck - Taper adapter for drills - Numerous drills (up to D=35) - Approx. 25 HSS cutting tools Request item: Transport costs will be provided in a separate quotation.

Condition: excellent (used), Year of construction: 2007, operating hours: 5,314 h, functionality: fully functional, machine/vehicle number: XD-20-BB-0452, spindle motor power: 4,300 W, turning length: 60 mm, spindle speed (max.): 8,000 rpm, turning diameter: 20 mm, spindle bore: 24 mm, overall weight: 3,250 kg, bar passage: 20 mm, total width: 1,490 mm, total length: 2,258 mm, total height: 1,758 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 32 m/min, feed rate Z-axis: 32 m/min, drilling capacity: 10 mm, travel distance X-axis: 62 mm, travel distance Y-axis: 340 mm, travel distance Z-axis: 210 mm, thread cutting capacity: M 10, power of the servo motor: 940 W, counter spindle motor power: 3,800 W, counter spindle speed (max.): 8,000 rpm, Equipment: rotational speed infinitely variable, Hanwha XD20N, year of manufacture 2007 – CNC Swiss-type long-bed lathe without a guide bushing. Compact CNC lathe for series production of smaller, precision parts from bar stock. The machine is equipped with a main spindle, a counter-spindle, and four cross-drilling driven tools, which allows for complete machining of the part from both sides in a single, simultaneous cycle. Particularly suitable for short and medium-length parts where a guide bushing is not required. Very low operating hours for the machine, considering its year of manufacture: automatic operation hours 7,454 hours, machining time 5,314 hours. The machine comes with various collets and chuck jaws – everything that is installed in the machine + additional ones, see photos. Direct sale to end-users only. The price includes loading at the seller's location: W-Technology s.r.o. Crodjzw Nt Sopfx Apteg Polní 8 79201 Bruntál Czech Republic

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 00320002700, spindle bore: 91 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 307 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,240 mm, total height: 2,500 mm, total length: 6,000 mm, total width: 2,200 mm, overall weight: 8,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, input voltage: 400 V, input frequency: 50 Hz, input current: 99 A, workpiece length (max.): 1,225 mm, nominal power (apparent): 65 kVA, workpiece diameter (max.): 480 mm, workpiece weight between centers: 500 g, operating hours of spindle: 1,103 h, Equipment: chip conveyor, documentation/manual, DMG MORI CLX 550 CNC lathe - Bed inclination: 45° - Bed diameter: 700 mm - Max. slide diameter V1 to V3: 500 mm - Max. workpiece diameter: 480 mm, in the front workpiece diameter: 320 mm - Distance between centers: 1450 mm - Y-axis travel: 120 mm (+- 60 mm) - Z3-axis travel: 1200 mm - Spindle height from axis to ground: 1043 mm - Main spindle, bar capacity: 80 mm - Bar diameter: 81 mm - Front bearing diameter: 130 mm - Resolution axis C1: 0.001° - The machine has a tailstock - Distance between two spindle centers: 1495 mm - Z1 axis travel: 1200 mm - Max. workpiece length: 1140 mm - Max. workpiece diameter: 450 mm - Bar capacity of the tailstock: 50 mm - Bore diameter of the tailstock: 73 mm Cjdpfezxy R Rjx Aptsrg - Bar diameter: 52 mm The machine is equipped with a tailstock (fitted with a three-jaw chuck SMW AUTOBLOK, diameter: 210 mm), as well as a 12-position tool turret, including powered tool stations, and an SMW AUTOBLOK three-jaw chuck, diameter: 250 mm. It also includes a chip conveyor, filter extraction, and documentation and CDs. FCA D-73529 Schwäbisch Gmünd - loaded onto a truck

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 845000756E, turning diameter: 400 mm, spindle bore: 103 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 265 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,050 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,400 mm, total length: 6,000 mm, total width: 2,400 mm, overall weight: 8,000 kg, bar passage: 90 mm, center height: 360 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, nominal power (apparent): 50 kVA, operating hours of spindle: 4,617 h, Equipment: documentation/manual, DMG MORI ECOTURN 510 CNC lathe Crsdezxzc Ispfx Apteg - Chuck diameter: 250 mm - Diameter in the front bearing: 140 mm - Feed drive in the X and Z axes: 40 x 10 mm - Feed forces X/Z: 7.5 kN - Y-axis feed force: 7000 N - Rapid traverse C1 axis: 100 m/min - Travel measuring system X/Y/Z: absolute rotary - Positioning uncertainty X: 0.008 mm, Z: 0.010 mm - Working area, distance between centers: 1150 mm - Max. swivel range above the bed: 680 mm - Swivel range above the X slide: 465 mm - Travel of the Y-axis: 120 mm (+/- 60 mm) The machine is equipped with a tailstock and a 12-position tool turret, including the tool holders located in the turret, as well as a three-jaw chuck SMW AUTOBLOK, diameter: 300 mm, including a chip conveyor, filter extraction, and documentation. FCA D-73529 Schwäbisch Gmünd - to be loaded onto a truck.

Condition: good (used), Year of construction: 2008, functionality: fully functional, CNC lathe Okuma LB 3000 EX MC 500 Control: OSP-P200L Year of manufacture: 2008 Internal machine number: 69 Turning length: 500 mm Turning diameter: 340 mm Swinging diameter over bed: 530 mm Spindle speed: 4,200 rpm Tool holder: BMT 60 Tool turret, 12 stations (powered) C-axis: 0.001 degrees Equipment: - One-touch IGF Csdezwlw Tspfx Aptorg - Chip conveyor - Touch setter - 3-jaw chuck Kitagawa B-210 - NC tailstock