Used Weiler Praktikus for sale (197)

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Commodor lathe with lead screw and tailstock, equipped with a 3-axis digital display Heidenhain ND780. In very good condition!!! Technical data: >> Year of manufacture 1991, Machine No. 3120 >> Center height 180 mm >> Distance between centers 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore 56 mm >> Short taper spindle head DIN 55027 size 6 with bayonet lock >> Tailstock MK 4 >> Feeds from 0.026 to 0.888 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 kW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from Heidenhain ND780 >> 3-jaw chuck 200 mm, 1 set of jaws Tods Agnrgopfx Airod >> Mulifix size B with 2 steel holders >> Drill chuck >> Bed stop >> Machine feet About the machine: Offered is a Weiler Commodor lathe in very good, fully functional condition. The machine comes from a state-owned company where it was used very little. The Commodor is one of the largest manual lathes manufactured by Weiler. A very robust and powerful machine. The 3-axis digital display from Heidenhain makes working with it even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on-site while it is powered up.

Condition: good (used), Year of construction: 1997, operating hours: 33,000 h, functionality: fully functional, machine/vehicle number: 323, turning diameter over cross slide: 200 mm, turning length: 950 mm, turning diameter: 410 mm, spindle bore: 54 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 950 mm, spindle motor power: 7,500 W, rotational speed (min.): 1 rpm, rotational speed (max.): 3,000 rpm, total height: 1,700 mm, total length: 2,300 mm, total width: 1,400 mm, quill travel distance: 120 mm, quill diameter: 65 mm, quill stroke: 120 mm, swing diameter over cross slide: 200 mm, feed rate Z-axis: 10 m/min, turning diameter over bed slide: 410 mm, turning diameter over top slide: 200 mm, type of input current: three-phase, torque: 700 Nm, overall weight: 2,100 kg, swing diameter over bed slide: 410 mm, bar passage: 54 mm, swing diameter over top slide: 200 mm, spindle nose: DIN 55027 Size 6 type, center height: 200 mm, bar diameter (max.): 54 mm, travel distance cross slide: 230 mm, Equipment: rotational speed infinitely variable, 1997 Weiler E35 Cycle-Controlled CNC Lathe Used 1997 Weiler E35 CNC / Cycle-Controlled Lathe for Sale – Weiler D1 Control – 410mm Swing – 54mm Spindle Bore – 3,000rpm – 10 Tool Holders Manufacturer: Weiler Model: E 35 Tjdpfx Ais Agu A Sored Machine Type: CnC Lathe Year: 1997 Condition: Working Well Machine Description The Weiler E35 is a high-quality German-built precision lathe combining the flexibility of a conventional centre lathe with the productivity of CNC/cycle-controlled machining. This machine is equipped with the Weiler digital conversational cycle control, allowing straightforward manual machining as well as programmed turning cycles for repeat work, tapers, radii and other common turning operations. With approximately 410mm swing over the bed, 54mm spindle bore and spindle speeds up to 3,000rpm, the E35 is particularly well suited to precision engineering, toolroom work, maintenance departments, repair work and small-to-medium batch production. The machine has approximately 33,000 power-on hours and is supplied with 10 quick-change toolpost holders. Main Specifications Manufacturer: Weiler Werkzeugmaschinen Model: E35 Year: 1997 Serial Number: 323 Machine Type: Cycle-Controlled / CNC Centre Lathe Control: Weiler Digital Cycle Control / D1-type control Power-On Hours: Approx. 33,000 hours Turning Capacity Swing Over Bed: 410mm Swing Over Cross Slide: 200mm Centre Height: 200mm Spindle Bore: 54mm Maximum Chuck Diameter: 250mm Faceplate Diameter: 355mm Distance Between Centres: 950mm Spindle Spindle Speed Range: 1–3,000rpm Spindle Power: 7.5kW Maximum Spindle Torque: 700Nm Spindle Bore: 54mm Spindle Internal Taper: MT6 Spindle Nose: DIN 55027 Size 6 type The combination of a 54mm spindle bore and substantial torque makes the E35 suitable for both precision finishing and heavier general turning work. Weiler Cycle Control The machine is fitted with the Weiler conversational cycle control, designed to make CNC turning accessible without requiring full conventional G-code programming for every job. The control provides functions for operations such as: Straight turning Facing Taper turning Radius turning Threading Positioning Feed control Spindle speed control Repetitive machining cycles Manual machine operation Conversational cycle programming This type of control makes the E35 particularly attractive to toolrooms and general engineering workshops where both one-off components and repeat batches are produced. Feed & Axis Performance Longitudinal Feed Range: 0.001–20mm/rev Cross Feed Range: 0.001–20mm/rev Longitudinal Rapid Traverse: 10m/min Cross Rapid Traverse: 5m/min Cross Travel: 230mm Tailstock Tailstock Taper: MT4 Tailstock Quill Diameter: 65mm Tailstock Quill Stroke: 120mm The tailstock allows the machine to support longer workpieces and carry out drilling, reaming and centre-working operations. Tooling Included The machine is supplied with: 10 quick-change toolpost holders Electrical Specification Operating Voltage: 400V Frequency: 50Hz Connected Load: 10kW Nominal Current: 18A Control Voltage: 24 / 230V Approximate Machine Dimensions Overall Length: 2,300mm Overall Width: 1,400mm Overall Height: 1,700mm Machine Weight: 2,100kg Please Note: All specifications, dimensions, capacities, speeds and machine details quoted above are approximate and are provided for guidance only.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Weiler Praktikant 160 B, lathe with guide and draw spindle, year of manufacture 2000, with 3-axis digital display K&C, NEW, CE marking!! Technical data: >> Year of manufacture 2000, machine no. 4651 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be switched on >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: switching mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeroing, switching the counting direction >> Quick-change tool holder, collets from 2 to 28 mm, increasing in 1 mm steps >> 3-jaw chuck 160 mm Röhm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> Electric chuck guard >> Bed stop, drill chuck >> Back wall >> Machine feet >> Coolant system >> Operating manual, parts list (PDF) About the machine: Teds Afxq Sepfx Aired Offered is a Weiler Praktikant 160 B lathe with guide and draw spindle, year of manufacture 2000, in very good condition. The machine is fully functional and has CE marking. All slides run very smoothly and evenly. The Weiler comes from a training workshop. Even at high speeds, the Weiler runs smoothly. This newer generation of Weiler lathes is very user-friendly and allows for the production of surfaces that appear to be ground. Take the opportunity to inspect this machine on site and under power to convince yourself of its condition.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B guide and pull spindle lathe with 3-axis digital display from K&C, from a vocational school. Tsdpfs Afyg Nox Airsd Technical data: >> Year of manufacture 1992, machine no. 92 160 3220 >> Center height 160 mm >> Center distance 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be activated >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C with operating manual Functions: Switching mm/inch, ABS/INC coordinate selection, halving the display value, reference mark, tool programming 200 items, taper calculation, radius/diameter, quick zeroing, switching the counting direction, >> 3-jaw chuck 160 mm with 2 sets of jaws >> 4-jaw chuck with 2 sets of jaws >> 3-jaw chuck with individually adjustable jaws >> Multifix A with 2 steel holders >> Bed stop, drill chuck >> Electronic spindle protection >> Rear panel >> Coolant system >> Operating manual, parts list About the machine: Offered is a Weiler Praktikant 160 B guide and pull spindle lathe, manufactured in 1992 with toolmaker precision, in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are as smooth as ground. Take advantage of the opportunity to inspect this machine on-site while it is powered and convince yourself of its condition.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Weiler Praktikant 140 B, lead and draw spindle lathe with toolmaker precision, manufactured in 1988, with a new 3-axis digital display from K&C!!!!! Technical data: >> Year of manufacture 1987, machine no. 87-140-751 >> Center height 140 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be activated >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> New 3-axis digital display from K&C, 12 months manufacturer's warranty with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 items, taper calculation, radius/diameter, quick zeros, switching the counting direction. >> Quick-change tool holder, collets from 2 to 28 mm in 1 mm increments >> 3-jaw chuck 160 mm Weiler with 2 sets of jaws Tedpfx Ae Afx R Hjirod >> Mulifix size A with 2 steel holders >> Coolant system >> Machine feet >> Bed stop >> Splash guard >> Operating manual, parts list About the machine: Offered is a Weiler Praktikant 140 B lead and draw spindle lathe in good condition. This very nice lathe is fully functional, of course. The machine comes from a research center. All slides run smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that appear to be ground. Take advantage of the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its condition.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Weiler high-precision lathe, model Condor 81, with lead and pull spindle, featuring a 3-axis digital display, Heidenhain ND780, from a training workshop. Technical data: >> Year of manufacture: 1988, Machine No. 88-955 >> Center height: 165 mm Tedpfx Ae Afxx Hsirsd >> Distance between centers: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock: MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be activated >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and equipment: >> 3-axis digital display, Heidenhain ND780 >> 1 three-jaw chuck, new, with 2 sets of jaws >> Collet chuck system, collets from 3 to 30 mm, 40 collets, some in duplicate >> Mulifix size B with 3 steel holders >> Bed stop >> Machine feet >> Drill chuck >> Follower rest For safety: >> Guard for the lead and pull spindle >> 2 emergency stop buttons >> Spindle brake About the machine: For sale is a used Weiler Condor 81 lathe, manufactured in 1988, in very good condition. The machine is fully functional. The lead and pull spindle are equipped with a guard for safety. This Weiler lathe comes from a training workshop. It is a very robust and powerful machine. The 3-axis digital display from Heidenhain makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on-site while it is powered up.

Condition: excellent (used), Year of construction: 1997, operating hours: 48,889 h, functionality: fully functional, center width: 1,000 mm, center height: 280 mm, spindle speed (max.): 2,500 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum height: 280 mm Distance between centers: 1000 mm Swinging diameter: 500 mm Diameter of rotation over bed: 570 mm Tjdpfxe Afxxbj Airsd Diameter of rotation over support: 340 mm Spindle speed max.: 2500 RPM MACHINE DETAILS Operating hours: 48,889 h EQUIPMENT Chuck

Condition: good (used), Year of construction: 2008, functionality: fully functional, Weiler DZ 40, Year of manufacture: 2008, Siemens 840 D control, Travel X/Z: 200/350 mm, Turning diameter: 180 mm, Max. swing diameter: 560 mm, Y-axis: +/-25 mm, Q-axis / programmable tailstock, Q-axis travel: 360 mm, Q-axis measuring system: rotary, Tedpfsz Sml Iox Airsd Tailstock: MK 4, Main spindle max. bar capacity: 42 mm, Spindle bore: 52 mm, Rapid traverse X/Z/Q: 30/30/20 m/min, Turret: 16 stations – all driven, VDI 25, Shank diameter: 25 mm, Driven tools up to 4,500 rpm, Parts catcher, Accessories, Driven tool holders, Fixed holders,

Condition: like new (used), Year of construction: 2015, functionality: fully functional, turning diameter over cross slide: 160 mm, spindle bore: 43 mm, turning diameter: 330 mm, center height: 165 mm, center width: 750 mm, turning length: 750 mm, quill stroke: 110 mm, total length: 1,800 mm, total width: 1,200 mm, total height: 1,650 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, overall weight: 1,250 kg, Conventional precision lathe, control WEILER C3/Sinumerik 840D, center high 165 mm, between centers 750 mm, bore Ø 43 mm, speed 1 - 4500 rpm stepless, motor 9 kw, equipement: collet device, coolant device, 3-jaws chuck SCHUNK, drill chuck, tool post MULTIFIX with 6 toolholders, lamp, dimensions 180x120x165 cm, weight ca. 1250 kgs; only a few working hours Todpfx Asz Rpmqsired

Condition: used, Year of construction: 1970, machine/vehicle number: 1421, Used lead screw and feed screw lathe WEILER LZ 330 Center height: 155mm Tsdpfe Agnmqox Airod Center distance: 800mm Spindle bore: 36mm Spindle speeds: 30-2,050 rpm 1 x 3-jaw chuck, diameter 160mm, coolant system, bed stop, manual clamping device (pull rod) with 14 collets, chip shield, quick-change tool holder size B with 1 insert, machine light. Digital display on the X-axis. The machine has been partially overhauled and repainted. The machine is located at our facility in 71334 Waiblingen-Beinstein and is immediately available. An inspection of the machine can be arranged.

Condition: ready for operation (used), functionality: fully functional, WEILER COMMODOR from vocational school / technical college - identification -Guides in good condition -Technical college identification -Good working condition -Maximum turning height 180mm -Maximum turning diameter 1000mm -Bar capacity 56mm -Speed range (gearbox) 56 - 2000 rpm -Automatic longitudinal / facing feeds -Threading / Metric / Inch, etc. -Tailstock MK4 -Three-jaw chuck approx. 200mm -ELECTRIC CHUCK GUARD -SPINDLE COVERS -2 x Emergency stop -Multifix base and inserts -Coolant system Tsdpfxsz R Dn Ao Airod -Chip guard -Work light -Documentation Dimensions: L x W x H 2.5 x 1.3 x 1.7 meters / Weight 1500kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, L & Z lathe / WEILER CONDOR AC / Stepless speed control / FROM AN EDUCATIONAL INSTITUTION - CE marking - Year of manufacture: 2000 - Swing over cross slide: 180 mm - Distance between centers: 165 mm - Max. swing: 330 mm - Turning length: approx. 800 mm - Speed (stepless): max. 2800 rpm - Automatic longitudinal / cross feeds - Threading / Metric / Inch etc. - 3-jaw chuck - Tailstock - Chip guard - Machine light - Multifix base and 6 inserts - Various change gears - Coolant system - Various operating tools - Documentation Dimensions: L x W x H: 1.8 x 1 x 1.8 meters / Weight: 1300 kg Errors and omissions excepted. Todpsz Izi Djfx Airjd

Condition: used, Year of construction: 2000, Weiler DA 180 / 1000 - Universal lathes - ACU-RITE position display - 3-jaw chuck, Ø 200 mm - Quick-change tool holder - Coolant system - Work area lighting - Chuck guard - Chip guard - Various tool holders and tools - Operating manual - Year of manufacture: 2000 Technical data Main spindle: - Spindle head according to DIN 55027: Size 6 - Spindle bore: 52 mm - Ø in front bearing: 83 mm - Internal taper: metric 57 - Number of speeds: 12 - Speed range: 33–1500 rpm Tailstock: Tsdo Agnynjpfx Aired - Diameter of tailstock spindle: 65 mm - Morse taper: Mk 4 - Lead of leadscrew: 6 mm - Turning tool cross-section: 20 × 20 mm Working ranges: - Swing over bed: 380 mm - Swing over cross slide: 185 mm - Travel of cross slide: 330 mm - Travel of top slide: 120 mm - Travel of tailstock spindle: 120 mm Feeds: - Longitudinal feeds: 0.072 – 4.038 mm/rev - Cross feeds: 0.036 – 2.019 mm/rev Threads: - Metric threads: 0.5 – 28 mm - Inch threads: 56 – 1 TPI - Module threads: 0.25 – 14 - D.P. threads: 112 – 2 Electrical connection: - Drive power: 5.5 kW - Motor rated speed: 1500 rpm Dimensions: - Center height above flat guideway: 180 mm - Center height above floor: 1060 mm - Bed width: 330 mm - Machine dimensions WxHxD: approx. 2400 x 1700 x 1200 mm - Machine weight: approx. 1800 kg

Condition: good (used), Year of construction: 1997, operating hours: 10,216 h, functionality: fully functional, turning diameter over cross slide: 200 mm, turning length: 300 mm, spindle bore: 32 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 345 mm, spindle motor power: 11 W, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (min.): 50 rpm, rotational speed (max.): 8,000 rpm, feed length X-axis: 200 mm, feed length Z-axis: 300 mm, feed rate X-axis: 12 m/min, feed rate Z-axis: 12 m/min, type of input current: AC, torque: 73 Nm, swing diameter over bed slide: 445 mm, chuck outer diameter: 140 mm, spindle nose: DIN55026 Gr. 5, Equipment: documentation/manual, Due to restructuring measures, we are selling our Weiler DZ32 CNC lathe. - Year of manufacture: 1997 - Second owner (previously used in a training workshop) - Very good condition for its age - Very few operating hours - total running hours: 10,216 h - Siemens Sinumerik 820 (GA3) T control with C-axis - Max. turning diameter: 230 mm / max. turning length: 300 mm - Main spindle: 8,000 rpm - Counter spindle: 5,000 rpm - 3-jaw hydraulic chuck Röhm 140 mm for main spindle - Additional collet chuck for main spindle - Collet chuck for counter spindle - Drive power: 11.5 kW - Sauter tool holder with 16 driven tools (max. 4,000 rpm) - Tool holder size: VDI 20 - Chip collection tray (hydraulic) - With substructure for height adjustment - Fully functional Tsdpfxozzcfpe Airsd - Many tool holders available, also with drive; these can be purchased depending on the price. - Complete operating and programming documents (German) - Spare parts and service available from Weiler - Machine can be inspected in our workshop while powered on This offer is non-binding. Subject to prior sale. No online sales. The sale is only to commercial customers after an on-site inspection and acceptance. Due to the age of the machine, the sale is made without any warranty. Pick-up only (EXW) - no shipping.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, L & Z spindle lathe / WEILER CONDOR B / incl. Heidenhain 3-axis digital control - Machine from an educational institution / in perfect condition - Three-axis Heidenhain digital control - Center height 165 mm - Swing over bed 330 mm - Swing over cross slide 185 mm - Turning length approx. 800 mm - Spindle speeds (geared) 22 - 2800 rpm - Thread cutting / Metric / Inch, etc. - Bar capacity 40 mm - Tailstock / Morse taper MK 3 - Electric chuck guard - Multifix base holder with inserts - Three-jaw chuck Forkardt - Machine lamp - Chip guard - Bed stop - Machine feet - Documentation Dimensions: L x W x H 1.8 x 0.8 x 1.6 meters / Weight 1100 kg Errors and omissions excepted. Todpfx Aijz St Iusrod

Condition: ready for operation (used), functionality: fully functional, L&Z Lathe WEILER LZ 330 incl. new 3-axis digital display (from an educational institution) -3-axis digital display "NEW" -Center height 165mm -Swinging diameter over bed 330mm -Turning length 800mm -Spindle speed range (geared) 25 - 2800 rpm -Automatic longitudinal / cross feeds Tedjz Ihvkjpfx Airod -New Multifix base and inserts -Collet chuck and various collets -3-jaw chuck -Original copying attachment -Various accessories -Documentation Dimensions: L x W x H 1.8 x 0.7 x 1.6 meters / Weight 800kg Errors and omissions excepted.

Condition: used, Year of construction: 2011, centre height 280 mm centre distance 1000 mm turning diameter over bed 570 mm turning diameter over slide rest 340 mm turning length 1000 mm spindle head A8 DIN55027 spindle diameter 1 mm spindle bore 83 mm torque 1600 Nm Tedpfx Asz I T Rajirjd turning speed range 1-2500 (2 Stufen) U/min worktool system Multifix C face stroke 340 mm rapid power traverse in X-and Z direction 5 / 10 m/min feed Z / X m / U feeding dorce 10000 / 7000 N tailstock quill diameter 80 mm tailstock quill stroke 160 mm tailstock quill taper ISO MK 5 total power requirement 15 kW Weight 3550 Kg dimensions of the machine ca. 3,85 x 2,30 x 1,80 m WEILER D3 Control Unit (SIN810D), Three-Jaw Chuck Multifix C Steel Holder, Chip Conveyor, Various Interchangeable Jaws MULTIFIX C Quick-Change Steel Holders

Condition: ready for operation (used), functionality: fully functional, L & Z Lathe WEILER Matador -Center height 140mm -Distance between centers 500mm -Speed range (continuously variable speed adjustment) 25-3000 RPM -Spindle bore approx. 36mm -Automatic longitudinal and cross feeds -Thread cutting / Metric / Inch, etc. -Tailstock / Morse taper MK3 -Electric chuck guard -Multifix with insert -Three-jaw chuck with interchangeable jaws -Machine feet Tsdpfxez Nltde Airjd -Change gears -Drill chuck & rotating center -Documentation Dimensions: L x W x H 1.5 x 0.6 x 1.2 meters / Weight approx. 600 kg Errors and omissions excepted.

Condition: used, Year of construction: 2018, operating hours: 8,563 h, functionality: fully functional, WEILER E 30 X 750 Cycle Turning Machine (2018) Manufacturer: WEILER Type: E 30 X 750 Cycle Turning Machine Year of manufacture: 2018 Todpfx Aiozy Sr Nered Condition: Used Operating hours: 8563 h

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, spindle bore: 56 mm, spindle speed (max.): 4,000 rpm, overall weight: 1,450 kg, For sale is a high-precision, cycle-controlled lathe, a WEILER CONDOR VC plus, manufactured in 2013. The machine is in fully functional and extremely well-maintained condition and comes with a very extensive set of accessories (pictures of the machine in use are included). Technical data & equipment: Manufacturer / Model: WEILER CONDOR VC plus Year of manufacture: 2013 Center height: 180 mm Distance between centers: 800 mm Swing over bed: 360 mm Spindle bore: Ø 56 mm Spindle speed: continuously variable up to 4,000 rpm Operating voltage: 400 V Connected load: 12.5 kVA Machine weight: approx. 1,450 kg Digital display / control: WEILER VC plus screen electronics Accessories & scope of delivery (as shown in the pictures): - 1x steady rest (fixed rest) - Extensive Multifix quick-change tool holder set - Large selection of chuck jaws (hard & soft) - Three-jaw chuck mounted - Splash guard / protective cover Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Todpfx Aoz Dwtwoired Inspection is possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: ready for operation (used), functionality: fully functional, Weiler Matador lead and draw spindle lathe -Distance between centers: 500 mm -Swing over bed: 140 mm -Automatic longitudinal/cross feeds -Thread cutting / metric, inch, etc. -Spindle bore approx. 36 mm -Spindle head: Size 5 -Speed range: (geared) 15–3,550 rpm -Brake motor -Coolant pump -Chuck guard -Forkardt F 160 collet chuck -Quick-change tool holder Multifix & insert -Drill chuck Tedpfxoztbbtj Airjd -Follower rest -Documentation Dimensions: L x W x H 1.5 x 0.6 x 1.2 meters / Weight 600 kg Errors and omissions excepted

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2021 Condition: Used, excellent, like new, incl. new maintenance and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Tedpfx Aioztyrqerjd Bed saddle guideway length: 350 mm Bed width: 205 mm Tool shank cross-section (H x W): 20 x 20 mm Height from top slide to turning centre: 30 mm Spindle head according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4,000 rpm Number of gear stages: 1 Number of speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill taper: 3 Morse taper Weight, without packaging and accessories: approx. 1,150 kg Dimensions (L x W x H), net: 1,720 x 890 x 1,700 mm Headstock / Rear cover / Sliding guard: Light grey RAL 7035 Machine base / Machine bed: Basalt grey RAL 7012 Display housing: Blue NCSS 4550-R80B

Condition: excellent (used), Year of construction: 2011, operating hours: 29,000 h, functionality: fully functional, Weiler E40 Precision Lathe Manufacturer: Weiler Type: E40 Year of Manufacture: 2011 Condition: Used, operational, ready for demonstration Operating Hours: 29,000 h Tsdpfx Asztypvsirjd Scope of Supply: - Documentation - Machine feet - Coolant system - Machine lamp - Full chuck jaws - Half chuck jaws - 3-jaw chuck - 4-jaw chuck - 4-position automatic tool changer incl. 4 tool holders - MultiFix tool changer

Condition: excellent (used), Year of construction: 2017, - Accessories included - Digital display WEILER VCPlus WORK AREA Maximum turning diameter over bed 360 mm Maximum turning diameter over cross slide 190 mm Distance between centers 800 mm Spindle center height 180 mm TURRET Spindle head DIN 55027/DIN ISO 702-3, size 6 Spindle bore 57 mm Spindle diameter in the front bearing 90 mm MAIN DRIVE Drive power 60 %/100 % duty cycle – / 10.5 kW Speed range 25 – 4,000 min-1 Number of speeds, infinitely variable FEED RANGE Number, infinitely variable Longitudinal 0.01 – 6 mm/rev Cross 0.003 – 2 mm/rev THREADING RANGE Tsdpfszu I Amex Aired Metric threads 0.1 – 20 mm TAILSTOCK Quill diameter 50 mm Quill travel 110 mm Internal taper DIN 228 MK 3 WEIGHT Machine 1400 kg DIMENSIONS Length / Width / Height 2000 x 970 x 1730 mm

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G, machine number 2679, in excellent condition, with draw and lead screw. Includes 3 chuck jaws 125mm, tool holder, and 4x Multifix AD2090 tool holders. Can be inspected and tested while powered on. Tedoz Eqn Djpfx Airod